Re: Backup OBSD router at 6.7, anyway to upgrade it to 6.9???

[Nick Holland]

On 5/17/21 9:16 PM, Jay Hart wrote:

Jay Hart  writes:


I lost internet access today for 4 hours due to a network
problem.  Trying to troubleshoot the problem I ended up placing
my backup router in service.

Its still at 6.7, it there anyway I can update it to 6.9 without
doing a full re-install, or has the only train left the station?


Any reason you don't want to go 6.7 -> 6.8 -> 6.9?

I went from 6.5 to 6.8 that way for one machine. You do have to
review the upgrade guides for any breaking changes though.

Allan



I absolutely do want to go 6.7 -> 6.8 -> 6.9.  Sysupgrade won't do
it, so I assume its a manual process at least from 6.7 to 6.8??

Jay


Naw.  sysupgrade will take 6.7 to 6.8.  Run again, you will go
from 6.8 to 6.9.  Easy, as long as the mirror you chose has all
the steps in the middle (they should all have 6.8 and 6.9, but
can be an issue for "bigger" spreads).

I, too, have done "Bigger than proper" jumps, but I know how to
clean up the mess and my backups are pretty good in case I'm wrong
about knowing how to clean up the mess. ;)

Nick.

Re: Backup OBSD router at 6.7, anyway to upgrade it to 6.9???

[Jay Hart]

> Jay Hart  writes:
>
>> I lost internet access today for 4 hours due to a network problem.  Trying 
>> to troubleshoot the problem I ended up placing my backup
>> router
>> in service.
>>
>> Its still at 6.7, it there anyway I can update it to 6.9 without doing a 
>> full re-install, or has the only train left the station?
>
> Any reason you don't want to go 6.7 -> 6.8 -> 6.9?
>
> I went from 6.5 to 6.8 that way for one machine. You do have to review
> the upgrade guides for any breaking changes though.
>
> Allan
>

I absolutely do want to go 6.7 -> 6.8 -> 6.9.  Sysupgrade won't do it, so I 
assume its a manual process at least from 6.7 to 6.8??

Jay

Re: Backup OBSD router at 6.7, anyway to upgrade it to 6.9???

[Allan Streib]

Jay Hart  writes:

> I lost internet access today for 4 hours due to a network problem.  Trying to 
> troubleshoot the problem I ended up placing my backup router
> in service.
>
> Its still at 6.7, it there anyway I can update it to 6.9 without doing a full 
> re-install, or has the only train left the station?

Any reason you don't want to go 6.7 -> 6.8 -> 6.9?

I went from 6.5 to 6.8 that way for one machine. You do have to review
the upgrade guides for any breaking changes though.

Allan

Backup OBSD router at 6.7, anyway to upgrade it to 6.9???

[Jay Hart]

I lost internet access today for 4 hours due to a network problem.  Trying to 
troubleshoot the problem I ended up placing my backup router
in service.

Its still at 6.7, it there anyway I can update it to 6.9 without doing a full 
re-install, or has the only train left the station?

Thanks in advance,

Jay

OpenBSD 6.9 and PHP version

[Steve Williams]

Hi,

When I upgraded to OpenBSD 6.9 then did the pkg_add -u, I got 
php-php-7.4.18 installed.


How do I know if it's "safe" to delete the old php-7.3.28 and all the 
associated modules?


I know I'll have to migrate my ".ini" file changes to the new version 
for both php and php_fpm, but other than that, how do I figure out if 
anything is still calling 7.3?


I have a simple build, roundcubemail, piwigo, nextcloud and a few others.

Thanks,
Steve W.

Re: sane-backends permission problems

[Allan Streib]

Predrag Punosevac  writes:

> predrag@oko$ scanimage -L
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).

Had the same problem today. sane-find-scanner returned...

found USB scanner (vendor=0x04a9 [Canon], product=0x2206 [CanoScan], 
chip=LM9832/3) at libusb:002:002

...but scanimage -L found no scanners. This scanner uses the
sane-plustek backend, so I added my user to the _saned group, and I had
changed the ownership on (in my case) /dev/ugen0.* and /dev/usb2 per the
sane-backends pkg-readme. Something else was wrong.

Running the the scanimage program under ktrace revealed:

  98418 scanimage NAMI  "/var/spool/lock/LCK..libusb:002:002"
  98418 scanimage RET   open -1 errno 13 Permission denied

Looking at /ver/spool/lock, it appears that this lockfile should be
created in the sane/ subdirectory instead?

$ ls -l /var/spool/lock/
total 4
drwxrwxr-x  2 root  _saned  512 May 17 16:12 sane

I don't see anything in /etc/sane.d/plustek.conf that implies that I can
change the lockfile location, so not sure how to correct this?

Allan

Re: Increase optical mouse/Synaptics touchpad speed in X11/spectrwm

[Jonathan Thornburg]

In message ,
Martin  asks how people adjust pointer
speed on touchpads/mice/etc.

I use 'xset': my .xinitrc contains the line

  xset m 1/4

-- 
-- "Jonathan Thornburg [remove -animal to reply]" 

   Dept of Astronomy & IUCSS, Indiana University, Bloomington, Indiana, USA
   currently on the west coast of Canada
   "There was of course no way of knowing whether you were being watched
at any given moment.  How often, or on what system, the Thought Police
plugged in on any individual wire was guesswork.  It was even conceivable
that they watched everybody all the time."  -- George Orwell, "1984"

Re: Dovecot maildir sync not working after upgrade to 6.9

[Brad Smith]

Hi William,

I would try posting what you have to the Dovecot mailing list and see what 
Aki says.


On May 17, 2021 7:18:35 a.m. William Orr  wrote:


Hey,

I have two mailservers running OpenBSD 6.9, and I use bidirectional
syncing of my maildirs through doveadm, part of dovecot. After the
upgrade, I noticed that the sync process was failing.

Here's a sample run:

kefka|~|02:57:05|0$ doas doveadm sync -u w...@worrbase.com 
remote:sabin.worrbase.com

doveadm(VERSION dsync   3   5): Error: User doesn't exist
dsync-local(worr): Error: read(sabin.worrbase.com) 
failed: EOF (version not received)
dsync-local(worr): Error: Remote command returned 
error 67: /usr/bin/ssh -i /root/.ssh/id_ed25519.dsync sabin.worrbase.com 
/usr/local/bin/dsync-in-wrapper.sh


kefka|~|02:57:08|75$ cat /usr/local/bin/dsync-in-wrapper.sh
#!/bin/ksh
read username
/usr/local/bin/doveadm dsync-server -u "$username"

I ktraced the process, and noticed that in the communication with the
remote mail server, that a bunch of doveadm plugins fail to load. It's
worth noting that these are plugins that are dlopen(3)ed in response to
certain commands sent over the wire, so they don't show up in ldd(1) output.

kefka|~|03:00:08|0$ doas kdump | grep symbol
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_user_module'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_mailbox_get_aclobj'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_mailbox_list_get_backend'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_object_list_init'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_object_list_next'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_backend_rights_match_me'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_rights_get_id'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_object_list_deinit'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_object_get_my_rights'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_rights_update_import'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_mailbox_update_acl'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_lookup_dict_rebuild'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_backend_nonowner_lookups_iter_init'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_backend_nonowner_lookups_iter_next'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_backend_nonowner_lookups_iter_deinit'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_backend_nonowner_lookups_rebuild'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_lookup_dict_is_enabled'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_lookup_dict_iterate_visible_init'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_lookup_dict_iterate_visible_next'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
  undefined symbol 'acl_lookup_dict_iterate_visible_deinit'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so: 
  undefined symbol 'quota_user_module'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so: 
  undefined symbol 'quota_root_get_resources'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so: 
  undefined symbol 'quota_get_resource'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
  undefined symbol 'fts_list_backend'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
  undefined symbol 'fts_backend_lookup'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
  undefined symbol 'fts_backend_lookup_done'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
  undefined symbol 'fts_search_args_expand'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
  undefined symbol 'fts_language_find'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
  undefined symbol 'fts_user_get_language_list'
  "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_

Increase optical mouse/Synaptics touchpad speed in X11/spectrwm

[Martin]

Hi list,

I've tried to speed up pointer by:

xinput --set-prop 'USB MOUSE' 'CoordinateTransformation Matrix' 2 0 0 0 2 0 0 0 
1.5

no effect.

How do people adjust pointer speed on their touchpads and mouses?

Martin

Can't run the PCB program on OpenBSD 6.9

[Freddy Fisker]

When I start the PCB program on OpenBSB 6.9 then the window is only open 
for a short moment.


Running PCB from the terminal is giving this message:

 openbsd7$ pcb

 (pcb:82167): Gtk-CRITICAL **: 12:25:03.067: IA__gtk_window_resize:
 assertion 'width > 0' failed

 (pcb:82167): Gtk-CRITICAL **: 12:25:03.184: IA__gtk_window_resize:
 assertion 'width > 0' failed
 pcb: Fatal IO error 55 (No buffer space available) on X server :0.0.


There was no problem running the PCB program on OpenBSD 6.8.


Best regards
Freddy Fisker

Re: VMM 6.9amd64 host video acceleration

[Martin]

Hi James,

Yes, packages are in sync with 6.9/packages.

The computer is relatively modern based on AMD Ryzen 4750U with integrated 
Radeon Graphics.

Radeon uses 
http://firmware.openbsd.org/firmware/6.9/amdgpu-firmware-20201218.tgz from 
/etc/firmware/amdgpu

So LibGL should load by MESA-LOADER: /usr/X11R6/lib/modules/dri without 
problems as I think. The firmware is actual and supports integrated Radeon 
since 6.9.

Maybe somebody knows what can affect on LibGl? I can't determine root of the 
problem.

Martin

‐‐‐ Original Message ‐‐‐
On Sunday, May 16, 2021 1:08 PM, James Cook  wrote:

> On Thu, May 13, 2021 at 10:00:11AM +, Martin wrote:
>
> > By the way,
> > While running Firefox on OpenBSD host I have repeatedly appearing console 
> > messages like below:
> > ###!!! [Parent][MessageChannel] Error: 
> > (msgtype=0x6A0008,name=PMessagePort::Msg___delete__) Channel closing: too 
> > late to send/recv, messages will be lost
> > ###!!! [Parent][RunMessage] Error: Channel closing: too late to send/recv, 
> > messages will be lost
> > LibGl error: MESA-LOADER: failed to open radeonsi (search path 
> > /usr/X11R6/lib/modules/dri
> > LibGl error: failed to load driver: radeonsi
> > LibGl error: MESA-LOADER: failed to open swrast (search path 
> > /usr/X11R6/lib/modules/dri)
> > LibGl error: failed to load driver: swrast
> > Any advice is this normal or not?
> > Martin
>
> On my system at least, firefox tends to output some errrors on the
> console. I think some involved "Channel closing". If it would help, I
> can keep more careful track and report them to the list.
>
> The LibGl errors look less familiar. Stab in the dark: are your ports
> and system in sync? (I always run pkg_add -u after upgrading to a new
> snapshot.)
>
> 
>
> James

Dovecot maildir sync not working after upgrade to 6.9

[William Orr]

Hey,

I have two mailservers running OpenBSD 6.9, and I use bidirectional
syncing of my maildirs through doveadm, part of dovecot. After the
upgrade, I noticed that the sync process was failing.

Here's a sample run:

kefka|~|02:57:05|0$ doas doveadm sync -u w...@worrbase.com 
remote:sabin.worrbase.com
doveadm(VERSION dsync   3   5): Error: User doesn't exist
dsync-local(worr): Error: read(sabin.worrbase.com) 
failed: EOF (version not received)
dsync-local(worr): Error: Remote command returned error 
67: /usr/bin/ssh -i /root/.ssh/id_ed25519.dsync sabin.worrbase.com 
/usr/local/bin/dsync-in-wrapper.sh

kefka|~|02:57:08|75$ cat /usr/local/bin/dsync-in-wrapper.sh
#!/bin/ksh
read username
/usr/local/bin/doveadm dsync-server -u "$username"

I ktraced the process, and noticed that in the communication with the
remote mail server, that a bunch of doveadm plugins fail to load. It's
worth noting that these are plugins that are dlopen(3)ed in response to
certain commands sent over the wire, so they don't show up in ldd(1) output.

kefka|~|03:00:08|0$ doas kdump | grep symbol

   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_user_module'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_mailbox_get_aclobj'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_mailbox_list_get_backend'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_object_list_init'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_object_list_next'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_backend_rights_match_me'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_rights_get_id'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_object_list_deinit'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_object_get_my_rights'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_rights_update_import'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_mailbox_update_acl'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_lookup_dict_rebuild'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_backend_nonowner_lookups_iter_init'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_backend_nonowner_lookups_iter_next'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_backend_nonowner_lookups_iter_deinit'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_backend_nonowner_lookups_rebuild'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_lookup_dict_is_enabled'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_lookup_dict_iterate_visible_init'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_lookup_dict_iterate_visible_next'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so: 
undefined symbol 'acl_lookup_dict_iterate_visible_deinit'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so: 
undefined symbol 'quota_user_module'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so: 
undefined symbol 'quota_root_get_resources'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so: 
undefined symbol 'quota_get_resource'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
undefined symbol 'fts_list_backend'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
undefined symbol 'fts_backend_lookup'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
undefined symbol 'fts_backend_lookup_done'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
undefined symbol 'fts_search_args_expand'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
undefined symbol 'fts_language_find'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
undefined symbol 'fts_user_get_language_list'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
undefined symbol 'fts_language_detect'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
undefined symbol 'fts_language_list_get_first'
   "doveadm:/usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: 
un

Re: openrsync manpage error

[Claudio Jeker]

On Fri, May 14, 2021 at 12:31:32PM +0300, Irshad Sulaiman wrote:
> Hi
>  Originally I was trying sync usb drive with openbsd box I was getting 
> same error 
> 
> Below is eg: I have two files bar and baz in home dir and dest is destination 
> directory 
> While trying to sync I get error 
> And if I try ‘rsync’ as command I get error not found 
> Iam in 6.9 release with syspatch updated 
> 
> 
> irshad:/home/irshad/test# ls
> bar  baz  dest
> irshad:/home/irshad/test# openrsync -t  bar baz dest/
> openrsync: error: unexpected end of file
> irshad:/home/irshad/test# openrsync -t  bar baz root@192.168.1.1:bar
> root@192.168.1.1's password:
> ash: rsync: not found
> openrsync: error: unexpected end of file
> irshad:/home/irshad/test# rsync
> ksh: rsync: not found
> irshad:/home/irshad/test# uname -a
> OpenBSD openbsd.local 6.9 GENERIC.MP#473 amd64
> irshad:/home/irshad/test#
> 

Yes, this is behaviour is expected right now. Since we install openrsync
as openrsync but the --rsync-path defaults to rsync (as it should).
This is normally not an issue since the remote server most probably has
rsync installed. I also have rsync installed on most of my systems so I
did not notice this.

Right now people should use the rsync package since the openrsync is not
enough compatible to work well in all scenarios.


> > On 14-May-2021, at 12:02 PM, Claudio Jeker  wrote:
> > 
> > On Fri, May 14, 2021 at 12:44:45AM +0300, Irshad Sulaiman wrote:
> >> Hi 
> >> 
> >> I have modified error in openrsync(1) manpage in Example section isn’t
> >> that ‘openrsync -t'  instead of 'rsync -t ‘
> >> And without --rsync-path= it gives an following error 'openrsync: error:
> >> unexpected end of file’
> > 
> > I did try all three examples and they do work for me without adding
> > --rsync-path=. On which command did you get the unexpected result.
> > Can you share the exact way to reproduce this issue?
> > 
> >> Apologize if Iam wrong 
> >> 
> >> Thanks 
> >> Irshad 
> >> 
> >> 
> >> 
> >> Index: rsync.1
> >> ===
> >> RCS file: /cvs/src/usr.bin/rsync/rsync.1,v
> >> retrieving revision 1.24
> >> diff -u -p -r1.24 rsync.1
> >> --- rsync.131 Mar 2021 20:36:05 -  1.24
> >> +++ rsync.113 May 2021 21:25:57 -
> >> @@ -234,7 +234,7 @@ with the local
> >> and
> >> .Pa ../src/baz :
> >> .Pp
> >> -.Dl % rsync -t ../src/bar ../src/baz host:dest
> >> +.Dl % openrsync -t --rsync-path=openrsync  ../src/bar ../src/baz host:dest
> >> .Pp
> >> To update the out-of-date local files
> >> .Pa bar
> >> @@ -245,7 +245,7 @@ with the remote files
> >> and
> >> .Pa host:src/baz :
> >> .Pp
> >> -.Dl % rsync -t host:src/bar :src/baz \&.
> >> +.Dl % openrsync -t --rsync-path=openrsync  host:src/bar :src/baz \&.
> >> .Pp
> >> To update the out-of-date local files
> >> .Pa ../dest/bar
> >> @@ -256,7 +256,7 @@ with
> >> and
> >> .Pa baz :
> >> .Pp
> >> -.Dl % rsync -t bar baz ../dest
> >> +.Dl % openrsync -t --rsync-path=openrsync  bar baz ../dest
> >> .\" .Sh DIAGNOSTICS
> >> .Sh SEE ALSO
> >> .Xr ssh 1
> >> 
> > 
> > -- 
> > :wq Claudio
> 

-- 
:wq Claudio