>> You would need a 1/4" wrench and a screwdriver tip that fits an impact
>> driver.
> I want to see you using your method for a deep sunken screw inside a
> cylindrical channel of a case.
> You can give a chance to the other guy, too.
> People like you do not understand concepts like evolution,
> man pf.conf is your friend, please consult there before letting
> resentment stew for years next time, huh?
why are you silent? do you have the courage to admit that the famous
russian comedian zadornov was right when said "ну тупые!"? ;)
> On 03/30/18 13:32, 3 wrote:
>> people like you do not understand what better badly does work than
>> well not works. and it is not our(not ordinary users) fault that the
> Seriously, cipher, you're just spewing word salad again.
> And it sounds vaguely like abuse, aim
> On Fri, Mar 30, 2018 at 9:58 AM, 3 <ba...@yandex.ru> wrote:
>> perhaps my poor english prevented you from understanding the question
> perhaps
>> my initial approach does work. u are have comments about route-to?
> If people do not understand the words you use t
> https://man.openbsd.org/pflow.4
> On Wed, Mar 28, 2018 at 4:03 PM, 3 <ba...@yandex.ru> wrote:
>> On 03/28/18 15:04, 3 wrote:
>>> hi guys. when the pflow option first appeared, i was surprised by the
>>> stupidity of those who implemented it- pflow could n
> 3(ba...@yandex.ru) on 2018.03.28 23:03:27 +0300:
>> > On 03/28/18 15:04, 3 wrote:
>> >> hi guys. when the pflow option first appeared, i was surprised by the
>> >> stupidity of those who implemented it- pflow could not be specified
>> >> for
> On 03/28/18 15:04, 3 wrote:
>> hi guys. when the pflow option first appeared, i was surprised by the
>> stupidity of those who implemented it- pflow could not be specified
>> for block-rules, i.e. dropped packets were not taken into account. as
> hm. you've suffered nine
> On 03/28/18 22:03, 3 wrote:
>> maybe im so dumb and blind to see pflow here.. and maybe deal not in
>> me. where is pflow?
> pflow gets the data it exports from the state table.
> Blocked connections do not create state table entries.
> This means that pflow does
hi guys. when the pflow option first appeared, i was surprised by the
stupidity of those who implemented it- pflow could not be specified
for block-rules, i.e. dropped packets were not taken into account. as
a result of this approach, the usefulness of pflow sought to zero for
those cases where
Вы писали 29 марта 2018 г., 16:35:45:
> On Wed, Mar 28, 2018, at 7:10 PM, 3 wrote:
>> > 3(ba...@yandex.ru) on 2018.03.28 23:03:27 +0300:
>> >> > On 03/28/18 15:04, 3 wrote:
>> >> >> hi guys. when the pflow option first appeared, i was surprised by th
i know that wifi adapters never worked in obsd(excluding those
adapters for which drivers were written by vendors), but i found one
that shows signs of life in 11n(11ac 2t2r supported by chip). it can
be bought anywhere where there are samsung tv. moreover it even works
in hostap mode(unlike the
> 2019-06-24 23:06 GMT+02:00, 3 :
>> i know that wifi adapters never worked in obsd(excluding those
> I doubt that they never worked. Check this out:
> https://man.openbsd.org/usb#Wireless_network_interfaces
> You can find specific devices under each driver. For example I use
> Provide a dmesg before you rant.
> Thanks,
> Brian
>> On Jun 24, 2019, at 5:06 PM, 3 wrote:
>>
>> i know that wifi adapters never worked in obsd(excluding those
>> adapters for which drivers were written by vendors), but i found one
>> that shows s
> On Tue, Jun 25, 2019 at 12:06:51AM +0300, 3 wrote:
>> i know that wifi adapters never worked in obsd(excluding those
>> adapters for which drivers were written by vendors), but i found one
>> that shows signs of life in 11n(11ac 2t2r supported by chip). it can
>&g
> On Sun, May 19, 2019 at 12:33:33PM +0300, 3 wrote:
>> shit. i have upgraded to 6.5 and now the interface is losing settings
>> after about 30 seconds:
>> athn0: flags=8843 mtu 1500
>> lladdr b0:48:7a:8c:41:79
>> index 17 priority 4
6f497bb0
> file + sys/dev/ic/ar9287reg.h
> --- sys/dev/ic/ar9287reg.h
> +++ sys/dev/ic/ar9287reg.h
> @@ -60,6 +60,7 @@
> * ROM layout used by AR9287 (2GHz only).
> */
> #define AR9287_EEP_START_LOC 128
> +#define AR9287_HTC_EEP_START_LOC 256
>
> Babut,
> You are not correct, OpenBSD is a full Unix/BSD implementation and can
> do most anything BSD/Unix can.
> I guess in the whole domain of general purpose functionality,
> concurrent disk/filesystem IO performance would be OpenBSD's humblest
> point today (due to not using block device
6f497bb0
> file + sys/dev/ic/ar9287reg.h
> --- sys/dev/ic/ar9287reg.h
> +++ sys/dev/ic/ar9287reg.h
> @@ -60,6 +60,7 @@
> * ROM layout used by AR9287 (2GHz only).
> */
> #define AR9287_EEP_START_LOC 128
> +#define AR9287_HTC_EEP_START_LOC 256
>
the rad+slaacd scheme is described everywhere, but if Windows is used
instead of slaacd then when you change the prefix, Windows gets the
address from the new prefix, but does not remove the old one. as a
result ipv6 routing does not work. so i want to make a stateful
configuration in which(i
sorry guys for the stupid question, but the answers to stupid questions keep
the world going :) in linux, there is a convenient feature in mc, when when
pressing ctrl-o we not only see the console, but also we can execute commands
in it. how to achieve this in obsd? it's about remote access via
> ... I added support for OpenBSD's ksh to the port in -current
i have heard different versions about the reasons for this, but there was no
version about dependence on shell. really works with bash! but thank you for
the opportunity not to use bash ;)
ked singularity.
> On Tue, 2022-11-08 at 22:47 +0300, 3 wrote:
>> what religion forbids using 0.0.0.0/32 in tables? 0_0 but 0/0 can be
>> used.. what's going on?! is the world going mad?
>>
> I don't use upnp, but surely you're going to have some problems
> with this upstream NAT...
or maybe i'm crazy..? 0_o what business can a program have to what happens
outside of its narrow little world consisting of two local interfaces? it's
none of her business what happens on the other
what religion forbids using 0.0.0.0/32 in tables? 0_0 but 0/0 can be used..
what's going on?! is the world going mad?
...
miniupnpd[31745]: resolve_stun_host: stun.sipgate.net:3478 => 217.10.68.145:3478
miniupnpd[31745]: perform_stun: local ports 3751 46253 4061 16242
miniupnpd[31745]: wait_for_stun_responses: waiting 3 secs and 0 usecs
miniupnpd[31745]: wait_for_stun_responses: received responses: 1
miniupnpd[31
sorry, guys. it turned out that this is not a bug, but just the author of the
program has gone mad. he considers himself the ruler of the galaxy and points
out how we should live :D
although it's not funny at all :\
> hi, men.
> it doesn't work only for me? as long as i can remember, there have
[IMAGE]
VIERNES,SABADO,DOMINGO
VENGAN A PASAR EL DIA CON NOSOTROS HAGA SU RESERVA.
(Dias de semana, previa llamada telefonica)
360-0416 /360-3673 /360-2189
* VEINTE MIL M2 DE AREAS VERDES
* ALQUILER DE BUNGALOWS
* RESTAURANT,BAR,POLLOS A LA LEQA,ALQUILER DE PARRILLAS
* PISCINAS,PISCINA PARA
Hi, i am goin to set up cvsup/anoncvs/cvsync server, but don't knwo how. Can
you help me with configuration of these
*cvs* servers? I have already write an e-mail to [EMAIL PROTECTED], but w/o any
answer. Thanks for help.
http://www.cristoysusamigos.com/laderas.jpg
VIERNES,SABADO,DOMINGO
VENGAN A PASAR EL DIA CON NOSOTROS HAGA SU RESERVA.
(Dias de semana, previa llamada telefonica)
360-0416 /360-3673 /360-2189
* VEINTE MIL M2 DE AREAS VERDES
* ALQUILER DE BUNGALOWS
* RESTAURANT,BAR,POLLOS A LA LEÑA,ALQUILER DE
29 matches
Mail list logo
