On Wed, Mar 06, 2024 at 09:16:01AM -, Stuart Henderson wrote:
> On 2024-03-06, Avon Robertson wrote:
> > 6. Serial Console Info, and OpenBSD 7.4 dmesg.boot
> >
> > Output has been captured via a serial console from the problem machine
> > from each of the installe
1. The UEFI BIOS on this machine does not have an option to disable
symmetric multi threading.
2. The machine has experienced intermittent hangs/freezes from the
time it was built and commissioned about 2 years ago.
3. All installNN.img files listed below, were successfully installed
On Sun, Feb 25, 2024 at 04:33:13PM -0600, Brian Conway wrote:
> On Sun, Feb 25, 2024, at 4:27 PM, Avon Robertson wrote:
> > I have noticed several posts related to endbr64 in the last week, so I
> > thought this might be of interest to someone.
> >
> > Performed a 's
I have noticed several posts related to endbr64 in the last week, so I
thought this might be of interest to someone.
Performed a 'sysupgrade -s' earlier today to:
kern.version=OpenBSD 7.5-beta (GENERIC.MP) #25: Sat Feb 24 20:50:14 MST 2024
On Sat, Jun 17, 2023 at 10:33:01PM -0700, Philip Guenther wrote:
> On Sat, Jun 17, 2023 at 9:38???PM Avon Robertson wrote:
>
> > Used lynx to get the 4 files shown below. The shell prompt is a 2
> > line prompt with current dir on 1st line,'$ ' only, on the 2nd line.
>
Hello,
Used lynx to get the 4 files shown below. The shell prompt is a 2
line prompt with current dir on 1st line,'$ ' only, on the 2nd line.
Below is output captured from a tmux pane with a script.
aahno:/
$ cat /etc/installurl
https://mirror.aarnet.edu.au/pub/OpenBSD
aahno:/
$ lynx $(cat
Hello Stefan,
On Mon, May 29, 2023 at 09:07:09PM +0200, Stefan Sperling wrote:
> On Mon, May 29, 2023 at 10:13:30PM +1200, Avon Robertson wrote:
> > $ fgrep -e AR9485 *
> > ar9003reg.h:#define AR9485_PHY_65NM_CH0_TOP20x16284
> > ar9003reg.h:#define AR9485_PHY_CH0_XTA
My aim is to configure this surplus laptop as a router firewall for my
daughter's home network.
The laptop previously had Windows 8 installed and it's keyboard worked
without apparent error under Windows 8, as did it's Atheros AR9485 WiFi.
OpenBSD Issue 1: Laptop Keyboard
When an attempt was
On Sat, Jan 21, 2023 at 07:59:46AM -0300, Crystal Kolipe wrote:
> On Sat, Jan 21, 2023 at 11:26:55PM +1300, Avon Robertson wrote:
> > During the reboot, immediately after the boot> prompt disappeared the
> > machine froze.
>
> Thanks for testing.
>
> I've only seen
Hello misc@,
After successfully applying this patch from Crystal Kolipe;
Date: Wed, 18 Jan 2023 21:00:29 -0300
From: Crystal Kolipe
To: t...@openbsd.org
Subject: Re: [patch] italic text on the console!
Message-ID:
Mail-Followup-To: t...@openbsd.org
References:
[1]
then
successfully
Two weeks ago I introduced another desktop machine to my home networks.
All parts in the machine are new parts except for the 2700X CPU.
Once it decides to fully boot, it runs without any apparent faults.
To fully boot successfully usually requires the machine to be
powered down or reset many
On Wed, May 25, 2022 at 12:03:00PM -, Stuart Henderson wrote:
> On 2022-05-22, Avon Robertson wrote:
> > The libcrypto build and install as outlined above by Theo was completed
> > without error a few minutes ago on the Dell M6600. It was then rebooted
> > and mutt's
On Tue, May 24, 2022 at 07:45:03PM +0200, Maik wrote:
> On Sun, May 22, 2022 at 09:53:29PM +1200, Avon Robertson wrote:
> > On Sun, May 22, 2022 at 10:15:35AM +1200, Avon Robertson wrote:
> > > On Fri, May 20, 2022 at 10:25:39PM +1200, Avon Robertson wrote:
> > > >
On Sun, May 22, 2022 at 10:15:35AM +1200, Avon Robertson wrote:
> On Fri, May 20, 2022 at 10:25:39PM +1200, Avon Robertson wrote:
> > On Fri, May 20, 2022 at 10:47:12AM +0200, Theo Buehler wrote:
> > > On Fri, May 20, 2022 at 04:08:25PM +1200, Avon Robertson wrote:
> >
On Fri, May 20, 2022 at 10:25:39PM +1200, Avon Robertson wrote:
> On Fri, May 20, 2022 at 10:47:12AM +0200, Theo Buehler wrote:
> > On Fri, May 20, 2022 at 04:08:25PM +1200, Avon Robertson wrote:
> > > I have been unable to fetch mail with mutt on this host using either t
On Fri, May 20, 2022 at 10:47:12AM +0200, Theo Buehler wrote:
> On Fri, May 20, 2022 at 04:08:25PM +1200, Avon Robertson wrote:
> > I have been unable to fetch mail with mutt on this host using either the
> > currently installed snapshot and mutt package, or the snapshot and m
On Fri, May 20, 2022 at 08:32:38AM -, Stuart Henderson wrote:
> On 2022-05-20, Avon Robertson wrote:
> > I have been unable to fetch mail with mutt on this host using either the
> > currently installed snapshot and mutt package, or the snapshot and mutt
> > package that h
I have been unable to fetch mail with mutt on this host using either the
currently installed snapshot and mutt package, or the snapshot and mutt
package that had been installed 2-3 days previously.
I have been able to send mail using mutt in conjuction with msmtp from
this host.
mutt's
On Wed, Feb 02, 2022 at 12:29:49PM -, Stuart Henderson wrote:
> On 2022-02-02, Stuart Henderson wrote:
> > On 2022-02-02, Avon Robertson wrote:
> >> I am trying to add a new PCI product ID (0xc158) for a serial interface
> >> interface card to /usr/src/sys/dev/pci/
Hello,
I am trying to add a new PCI product ID (0xc158) for a serial interface
interface card to /usr/src/sys/dev/pci/pcidevs.
For some reason e.g.: an omission or error due to something I should
[not] have done; make will not execute as shown below with other
relevant information.
I would
On Fri, Oct 22, 2021 at 10:09:03AM +0200, Emiel Kollof wrote:
> Avon Robertson schreef op vr 22-10-2021 om 15:35 [+1300]:
>
>
> > My AMD machine was built by me in August 2018. OpenBSD -current was
> > the first OS installed and has been updated every 1-2 weeks since. It
On Thu, Oct 21, 2021 at 03:12:33PM -0700, Chris Cappuccio wrote:
> Emiel Kollof [em...@kollof.nl] wrote:
> > Chris Cappuccio schreef op do 21-10-2021 om 07:56 [-0700]:
> >
> > > This appears to be a totally different failure than found by Avon.
> > > It's also on a different class of hardware.
>
Hello Emiel,
Please read my inline and other comments.
On Thu, Oct 21, 2021 at 09:55:46AM +0200, Emiel Kollof wrote:
> Avon Robertson schreef op 2021-10-20 20:31:
>
> >As suggested above by Chris?
> >1. Downloaded radeondrm-firmware-20181218.tgz to ~/download/.
> >2
On Tue, Oct 19, 2021 at 06:51:14PM +1300, Avon Robertson wrote:
> On Mon, Oct 18, 2021 at 03:52:34PM -0700, Chris Cappuccio wrote:
> > Here's a thread where people are seeing similar hangs on similar hardware
> > under Linux:
> >
> > https://bugs.freedesktop
version to test, it may not be.
> It's just the first earlier version available on firmware.openbsd.org. You
> may need to grab a different version from a Linux repository.
>
> Chris
>
> Avon Robertson [avo...@xtra.co.nz] wrote:
> >
> > drm:pid70131:gmc_v8_0_process_inte
On Sat, Oct 16, 2021 at 08:27:03PM +1300, Avon Robertson wrote:
> Avon Robertson [avo...@xtra.co.nz] wrote:
> > Hello misc@,
> >
> > Earlier today an AMD host I have froze again. I ssh'd into the host
> > and retrieved the output from dmesg, /var/log/messages,
Avon Robertson [avo...@xtra.co.nz] wrote:
> Hello misc@,
>
> Earlier today an AMD host I have froze again. I ssh'd into the host
> and retrieved the output from dmesg, /var/log/messages, and
> /var/run/dmesg.boot.
>
> I found nothing of note in $HOME/.local/
Hello misc@,
Earlier today an AMD host I have froze again. I ssh'd into the host
and retrieved the output from dmesg, /var/log/messages, and
/var/run/dmesg.boot.
I found nothing of note in $HOME/.local/share/xorg/Xorg.0.log.
At the time of the freeze the ksh script I use to update my local /cvs
Hello misc@,
I seek help solving the below mystery. Thank you all in advance.
On two amd64 hosts that have the same change (add 0xc158 support) in
file /usr/src/sys/dev/pci/pcidevs, host z97st executes 'make' in
directory /usr/src/sys/dev/pci, whilst host gx470 reports an error
w.r.t. the same
On Thu, Jun 10, 2021 at 11:06:46AM -, Stuart Henderson wrote:
> On 2021-06-09, Avon Robertson wrote:
> > On Tue, Jun 08, 2021 at 11:11:15AM +1200, Avon Robertson wrote:
> >> On Mon, Jun 07, 2021 at 08:21:24PM -, Stuart Henderson wrote:
> >> > On 202
On Tue, Jun 08, 2021 at 11:11:15AM +1200, Avon Robertson wrote:
> On Mon, Jun 07, 2021 at 08:21:24PM -, Stuart Henderson wrote:
> > On 2021-06-07, Avon Robertson wrote:
> > > $ make obj
> > >===> ssh
> > > /usr/src/usr.bin/ssh/ssh/obj -> /usr/obj/usr
On Mon, Jun 07, 2021 at 08:21:24PM -, Stuart Henderson wrote:
> On 2021-06-07, Avon Robertson wrote:
> > $ make obj
> >===> ssh
> > /usr/src/usr.bin/ssh/ssh/obj -> /usr/obj/usr.bin/ssh/ssh
> > mkdir: /usr/obj/usr.bin: Permission denied
> > *** Error 1
Hello again Theo, Stuart, and naddy,
Please view my findings at the end of this post.
On Mon, Jun 07, 2021 at 12:16:19PM +1200, Avon Robertson wrote:
> Hello Theo, Stuart, and naddy,
>
> Thank you for your responses. I will do as you have suggested and
> post my findings t
gt; source rather than snapshot and see if it fixes things,
> >
> > $ cd /usr/src/usr.bin/ssh
> > $ cvs up
> > $ make obj
> > $ make
> > $ doas make install
> >
> >
> > On 2021-06-06, Avon Robertson wrote:
> > > Hello misc@,
> >
Hello misc@,
I have used a shell script containing the following statements since the
20th January 2021. It has executed without error until recently. The
last error free execution was on the 30th May.
#!/bin/ksh
logfile="$HOME/var/log/updcvs"
printf "\n$(date)\n" >> $logfile
printf "Call
On Sat, Feb 29, 2020 at 07:41:59AM -0800, Justin Noor wrote:
> Awesome - thank you for your time and for the valuable information.
>
> That’s hilarious about the serial port. I’ll try plugging into a switch,
> reproducing the crash, and SSHing into it. I still haven’t tried the
> syslogd tip you
On Sat, Feb 29, 2020 at 12:57:07AM +1000, Stuart Longland wrote:
> On 28/2/20 11:32 pm, Justin Noor wrote:
> > Thanks for offering to help and sorry for the delay - I got dragged into a
> > work emergency. I finally managed to SCP my dmesg to a remote machine.
>
> Heh, no problems, these things
37 matches
Mail list logo
