ssh tunneling

2009-04-01 Thread Jay Jesus Amorin
Hi,

Just would like to ask for your advice.

I have a firewall rule that allow ssh from computer-1 to computer-2 and deny
ssh from computer-2 to computer-1.

is it possible to a tunnel *ssh **myu...@computer-2*
*'svn update svn+ssh://u...@computer-1/svn/data
/home/myuser' *and use the same tunnel when *svn update
svn+ssh://u...@computer-1/svn/data /home/myuser* is invoke going to
computer-1 from computer2 through ssh, when ssh not allowed from computer-2
to computer-1.


Many thanks,


Jay



Re: OT recommended mobo with lots of pci slots

2007-09-04 Thread Jay Jesus Amorin

hi,

Just an o.t. based on your experience, can anyone pls recommend to me a 
intel/asus/epox mobo for dual core or pentium 4 proc with a lots of pci 
slot probably 4 or 5 pci slots and works fine on openbsd .


is there a good(at least) support on linux or bsd for intel dual core proc?


Thanks for your help guys.

--
Jay Jesus D. Amorin

Mobile: +639156275787
Home: +63 35 422-0023
Email: jay [at] jayamorin [dot] ph

YM: jayamorin



Re: extracting iso

2007-07-19 Thread Jay Jesus Amorin

humppa,

is there a tool/way to extract an iso file  to a directory?

thanks

--
Jay

Software like sex is best when its free.



Re: Macbook on Openbsd

2007-07-10 Thread Jay Jesus Amorin

is anyone out there running openbsd on intel based macbook or macbook pro?

any problems or compatibility issue? performance?

i'm planning to buy one or any reason why i shouldn't?

cheers

--
Jay Jesus D. Amorin, CCNA, LPIC-1

Mobile No. +639156275787
Landline No. +63 35 422-0023
Website: http://www.jayamorin.ph
Email Address: jay [at] jayamorin [dot] ph



iwi0: XXX too many rates (count=13, last=108)

2007-03-26 Thread Jay Jesus Amorin

hi gurus,

can anyone please give me some knowledge on this:

# dmesg

iwi0: XXX too many rates (count=13, last=108)


has this something to do with my iwi0 configuration?

/etc/hostname.iwi0

dhcp inet NONE NONE description wifi nwid mathwifi_02

btw. im running openbsd 4.1-current


thanks


--jay--



any site or doc about openbsd kernel configuration, info or tweak?

2007-03-25 Thread Jay Jesus Amorin

any site or doc about openbsd kernel configuration, info or tweak
aside from man page?

thanks



acpi is working but halt -p is now working, why?

2007-03-23 Thread Jay Jesus Amorin

im running openbsd 4.1-current on my laptop, acpi is working but halt
-p is not working, it will just reboot instead of halt, WHY?

here's my additional info:

# sysctl -aA | grep acpi

kern.timecounter.hardware=acpitimer0
kern.timecounter.choice=i8254(0) acpihpet0(1000) acpitimer0(1000)
dummy(-100)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=14.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.54 VDC (current voltage)
hw.sensors.acpibat0.amphour0=3.81 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.21 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.13 Ah (low capacity)
hw.sensors.acpibat0.amphour3=3.42 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=2 (battery charging), OK
hw.sensors.acpibat0.raw1=unknown (rate), UNKNOWN
hw.sensors.acpitz0.temp0=51.05 degC (zone temperature)


# dmesg

OpenBSD 4.1-current (GENERIC) #7: Sat Mar 24 03:37:46 PHT 2007
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel"
686-class) 1.50 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 795308032 (776668K)
avail mem = 717516800 (700700K)
using 4278 buffers containing 39890944 bytes (38956K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 07/08/05, BIOS32 rev. 0 @
0xfd710, SMBIOS rev. 2.31 @ 0xdf010 (19 entries)
bios0: Hewlett-Packard Presario M2000 (PV328PA#UUF)
pcibios0 at bios0: rev 2.1 @ 0xfd710/0x8f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf20/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc/0xf200! 0xcf800/0x1000 0xdf000/0x800! 0xe/0x4000!
acpi0 at mainbus0: rev 0
acpi0: tables DSDT APIC FACP HPET MCFG BOOT SSDT SSDT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table APIC not configured
acpi device at acpi0 from table FACP not configured
acpihpet0 at acpi0 table HPET: 248348 Hz
acpi device at acpi0 from table MCFG not configured
acpi device at acpi0 from table BOOT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiec0 at acpi0: EC0_
acpibtn0 at acpi0: PRWB
acpibtn1 at acpi0: SLPB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0: model: JM-6 serial: 0095813029 type: LION
oem: Hewlett-Packard
acpibtn2 at acpi0: LID_
acpitz0 at acpi0, critical temperature: 98 degC
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x03:
aperture at 0xb008, size 0x1000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 3
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 3
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 4
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 1
rl0 at pci1 dev 0 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:c0:9f:90:0f:6f
rlphy0 at rl0 phy 0: RTL internal PHY
iwi0 at pci1 dev 6 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
irq 4, address 00:12:f0:c7:30:a9
cbb0 at pci1 dev 9 function 0 "TI PCI7XX1 CardBus" rev
0x00pci_intr_map: no mapping for pin A
: couldn't map interrupt
"TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 9 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci1 dev 9 function 3 not configured
sdhc0 at pci1 dev 9 function 4 "TI PCI7XX1 Secure Data" rev 0x00: irq 11
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 5, ICH6 AC97
ac97: codec id 0x43585430 (Conexant CX?)
ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:  SCSI0
5/cdrom removable
wd0(pciide0:0:0): using P

openbsd acpi help

2007-03-22 Thread Jay Jesus Amorin

good day!

can anyone here help me on how i can enable acpi on my laptop?

my laptop is running openbsd 4.1-current.

thanks for your help


long live openbsd.


--jay--



help with 4.1 snapshots and latest ports and src

2007-03-20 Thread Jay Jesus Amorin

is my setup ok?

im running snaphots 4.1

and here's my supfile:

# /usr/supfile

*default release=cvs
*default delete use-rel-suffix
*default umask=002
*default host=anoncvs.usa.openbsd.org
*default base=/usr
*default prefix=/usr
*default tag=.

OpenBSD-ports
OpenBSD-src
OpenBSD-xf4

check-out cvs and upgrade:

# cvsup -g -L 2 /usr/supfile


and another question how will i upgrade from snapshots 4.1 to current?

thanks


--jay--



whats wrong with my iwi still ieee80211: nwid "" -50dBm

2007-03-19 Thread Jay Jesus Amorin

#dmesg

OpenBSD 4.0 (GENERIC) #1: Mon Mar 19 00:36:34 PHT 2007
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel"
686-class) 1.50 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 795308032 (776668K)
avail mem = 716935168 (700132K)
using 4256 buffers containing 39866368 bytes (38932K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 07/08/05, BIOS32 rev. 0 @
0xfd710, SMBIOS rev. 2.31 @ 0xdf010 (19 entries)
bios0: Hewlett-Packard Presario M2000 (PV328PA#UUF)
pcibios0 at bios0: rev 2.1 @ 0xfd710/0x8f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf20/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc/0xf200! 0xcf800/0x1000 0xdf000/0x800! 0xe/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x03:
aperture at 0xb008, size 0x1000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 4
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 1
rl0 at pci1 dev 0 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:c0:9f:90:0f:6f
rlphy0 at rl0 phy 0: RTL internal PHY
iwi0 at pci1 dev 6 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
irq 4, address 00:12:f0:c7:30:a9
cbb0 at pci1 dev 9 function 0 "TI PCI7XX1 CardBus" rev
0x00pci_intr_map: no mapping for pin A
: couldn't map interrupt
"TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 9 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci1 dev 9 function 3 not configured
sdhc0 at pci1 dev 9 function 4 "TI PCI7XX1 Secure Data" rev 0x00: irq 11
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 5, ICH6 AC97
ac97: codec id 0x43585430 (Conexant CX?)
ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 3
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask efdd netmask efdd ttymask ffdf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 48007 Hz, will use 48000 Hz
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: vendor 0x0457 product 0x0151, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets
sd0 at scsibus0 targ 1 lun 0:  SCSI2
0/direct removable
sd0: 1000MB, 1000 cyl, 64 head, 32 sec,

Re: sshd configure howto

2007-03-17 Thread Jay Jesus Amorin

im using this set-up for pf/authpf authentication gateway, all i'm
concern of is i dont want my user use other users account.

hope this helps you help me.

thanks

--jay--

On 3/17/07, Joachim Schipper <[EMAIL PROTECTED]> wrote:

On Sat, Mar 17, 2007 at 12:46:29PM +0800, Jay Jesus Amorin wrote:
> On 3/17/07, Joachim Schipper <[EMAIL PROTECTED]> wrote:
> >On Fri, Mar 16, 2007 at 07:17:10PM +0800, Jay Jesus Amorin wrote:
> >> hi gurus,
> >>
> >> how will i configure sshd to allow only one username at a time.
> >>
> >> example:
> >>
> >> on pc1  ssh [EMAIL PROTECTED]
> >> on pc2  ssh [EMAIL PROTECTED]
> >>
> >> now what i like to happen is ssh on pc2 should be drop bec. the user
> >> root is already connected from pc1.
> >>
> >> is it possible with to configure sshd that way like ssh will already
> >> drop ssh root from pc2 bec. username root is already connected from
> >> pc1?
> >
> >I don't think that is a smart idea, and I am not aware of any way to
> >implement this particular requirement. You could probably write a daemon
> >or cron job that takes a look at the number of ptys in use by any single
> >account, and so on.
>
> thanks for the ideas

Not to appear too nosy, but what do you *really* want to do? If you are
concerned about people leaving root sessions unattended, perhaps a
timeout would be a better way of achieving this? IIRC, there are some
programs that will lock a console when it's not used for X seconds.

Joachim




Re: sshd configure howto

2007-03-16 Thread Jay Jesus Amorin

thanks for the ideas

On 3/17/07, Joachim Schipper <[EMAIL PROTECTED]> wrote:

On Fri, Mar 16, 2007 at 07:17:10PM +0800, Jay Jesus Amorin wrote:
> hi gurus,
>
> how will i configure sshd to allow only one username at a time.
>
> example:
>
> on pc1  ssh [EMAIL PROTECTED]
> on pc2  ssh [EMAIL PROTECTED]
>
> now what i like to happen is ssh on pc2 should be drop bec. the user
> root is already connected from pc1.
>
> is it possible with to configure sshd that way like ssh will already
> drop ssh root from pc2 bec. username root is already connected from
> pc1?

I don't think that is a smart idea, and I am not aware of any way to
implement this particular requirement. You could probably write a daemon
or cron job that takes a look at the number of ptys in use by any single
account, and so on.

Joachim





--
Jay Jesus D. Amorin, CCNA, LPIC-1
Department of Mathematics,
University of the Philippines, Diliman

Mobile No. +639156275787
Landline No. +63 02 434-2309
Email Address: jdamorin [at] gmail [dot] com
Email Address: jay [at] math [dot] upd [dot] edu [dot] ph

--
Be liberal in what you accept, and conservative in what you send.
--



sshd configure howto

2007-03-16 Thread Jay Jesus Amorin

hi gurus,

how will i configure sshd to allow only one username at a time.

example:

on pc1  ssh [EMAIL PROTECTED]
on pc2  ssh [EMAIL PROTECTED]

now what i like to happen is ssh on pc2 should be drop bec. the user
root is already connected from pc1.

is it possible with to configure sshd that way like ssh will already
drop ssh root from pc2 bec. username root is already connected from
pc1?


--jay--



redirect unauthenticated web users

2007-03-14 Thread Jay Jesus Amorin

openbsd gurus,

can u please give me an idea on how can i redirect all unauthenticated
authpf users to a webpage?

and after authentication it can continue surfing the net.

my rules seems wont work for me.

/etc/pf.conf

rdr on $wifi_if proto { tcp, udp } from !  to any port {
www, https } -> $authgate port www


pass in quick on $wifi_if proto { tcp, udp } from any to $authgate
port www keep state
anchor "authpf/*" in on $wifi_if


im running pf on openbsd 4.0.


thanks



mounting problems

2006-10-29 Thread Jay Jesus Amorin
hi,

pls. help me mount my partition in my linux partitions

#fdisk -lu /dev/hda (in linux)
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes

   Device Boot  Start End  Blocks   Id  System
/dev/hda1   *  634882153424410736   a6  OpenBSD
/dev/hda248821535   156296384537374255  Extended
/dev/hda54882159852725329 1951866   a6  OpenBSD
/dev/hda652725393   10154686424410736   83  Linux
/dev/hda7   101546928   105450659 1951866   82  Linux swap / Solaris
/dev/hda8   105450723   15629638425422831   83  Linux

how will i mount /dev/hda8 and /dev/hda6 in openbsd?

my openbsd /etc/fstab entry:

/dev/wd0a / ffs rw 1 1


thanks,

--jay--



openbsd cd resellers in asia?

2006-10-25 Thread Jay Jesus Amorin
hi,

im from the Philippines and i would like to order a openbsd 4.0 cd, does
anyone in here can help where in asia can i order the said openbsd stuff?

the http://www.genesis.com.hk which openbsd.org said where i can
purchase in asia seems not responding.  :(

thanks


--jay--



openbsd mobile question?

2006-10-16 Thread Jay Jesus Amorin
hi,

does openbsd 4.0 supports intel ac'97 modem and intel ipw2200 on laptop?

guys, any ideas?

thanks


jay



pf.conf question?

2006-09-19 Thread Jay Jesus Amorin
hi,

good day, how do i  do an alternate sets of route-to rules for the internal
interface loaded in an anchor?

btw im doing a failover between two firewalls,

|--| |-|
| internet  | | internet  |
|--| |-|
   ||
   ||
|--| |--|
| firewall 1 || firewall 2 |
|--| |--|
   | |
   | |
|---|
| manage switch (des-3326sr) |
|---|

i've used ifstated to detect ( thanks a lot for those who help ).

any suggestions? help?

thanks more power to openbsd


--jay--



Re: starting ifstated at boot

2006-09-19 Thread Jay Jesus Amorin
rc.conf.local

ifstated_enable="YES"

wont work for me.


has anyone got to run ifstated at boot on openbsd?

thanks,

--jay--

On 9/18/06, Stuart Henderson <[EMAIL PROTECTED]> wrote:
>
> On 2006/09/18 03:23, Nick Guenther wrote:
> > On 9/18/06, Jay Jesus Amorin <[EMAIL PROTECTED]> wrote:
> > >hi,
> > >
> > >have gud day, how do i configure ifstated to automatically start at
> boot
> > >time?
> > >
> > >thanks and more power
> >
> > man rc.conf
>
> ifstated isn't handled by /etc/rc; try rc.local.



starting ifstated at boot

2006-09-17 Thread Jay Jesus Amorin
hi,

have gud day, how do i configure ifstated to automatically start at boot
time?

thanks and more power


--jay--



carp or trunk for loadbalancing?

2006-09-01 Thread Jay Jesus Amorin
hi,

which is better to use if i load balance my 2 ethernet ports, would you
prefer to use carp or trunk?
btw im going to load balance 2 ethernet ports on my openbsd firewall
going to my manage switch which supports 802.1q and port-aggregation or
load sharing between multiple ports.

thanks a lot for your suggestions.

Jay