On Wed, Apr 10, 2024 at 12:53:12AM +0200, Stanislav Syekirin wrote:
> Stefan Sperling wrote:
> > Do you have any of iwn/iwm/iwx or another device which could capture
> > raw 802.11 frames of failed association attempts in monitor mode?
>
> I have a neglected device wit
On Tue, Apr 09, 2024 at 08:31:50PM +0200, Stanislav Syekirin wrote:
> Yes, it does. I'm not sure whether it's always the case, but this time it
> works. Dmesg output:
>
> bwfm0: SCAN -> AUTH
> bwfm0: AUTH -> ASSOC
> bwfm0: ASSOC -> RUN
> bwfm0: associated with f0:af:85:9a:e4:22 ssid
On Tue, Apr 09, 2024 at 07:15:55PM +0200, Stanislav Syekirin wrote:
> Thank you so much for the hint, now I understand what the debug option does.
> I have actually tried it, but, because `man ifconfig` says "this turns on
> extra console error logging", I incorrectly assumed that it would output
On Mon, Apr 08, 2024 at 11:30:07PM +0200, Stanislav Syekirin wrote:
> This is my /etc/hostname.bwfm0:
Please add a line saying 'debug' at the top if hostname.bwfm0:
debug
> join NETWORK_IN_QUESTION_5G wpakey PASSWORD
> inet6 autoconf
> inet autoconf
>
> I would appreciate any
On Sat, Mar 30, 2024 at 11:31:11AM +0300, 4 wrote:
> > On Fri, Mar 01, 2024 at 07:14:17PM -0500, Philippe Meunier wrote:
> > This driver does not yet
> > support 11n/11ac modes, and adding such support will require a big
> > chunk of further development time, it won't be ready for 7.5.
> dear, why
On Mon, Mar 25, 2024 at 12:13:06PM +, ZenitDS wrote:
> Hello,
> On boot the urtwn0 interface is configured as expected, but after
> I sleep using 'zzz', it gets resetted and I have to manually run
> 'sh /etc/netstart' with root priviliges to reconfigure the interface.
> I tried using
On Fri, Mar 22, 2024 at 04:25:08PM +0500, ofthecentury wrote:
> Thanks. This does work on an interface, but not on -r /var/log/pflog?
You cannot log wifi management frames in PF because PF does not operate
at the wifi layer.
There is hostapd(8) which and can do some interesting things with these
On Fri, Mar 22, 2024 at 03:39:57PM +0500, ofthecentury wrote:
> I am getting wireless disassociation attacks.
> I wanted to look at the packets via:
> `tcpdump -nettt -I -i athn0 -s 256
> type mgt subtype disassoc`
> but I get an error:
> "tcpdump: type not supported on linktype 0x1"
> Should work
On Thu, Mar 21, 2024 at 02:29:14AM -0600, Raymond, David wrote:
> At some point (I can't put my finger on exactly when this started), an
> existing firefox instance hangs after my laptop is put to sleep and then
> wakes from sleep. Websites in existing tabs still work, but searching for
> another
On Sun, Mar 03, 2024 at 05:02:13PM +0100, Omar Polo wrote:
> Hello,
>
> On 2024/03/03 15:07:34 +0100, 20 100 wrote:
> > Hello Stefan,
> >
> > First of all many thanks for your work around qwx.
> >
> > Here after some observations on my T14s regarding qwx.
> >
> > My OpnBSD current setup is
On Sat, Mar 02, 2024 at 10:54:34PM -0500, Philippe Meunier wrote:
> >Can you please show a beacon of this AP?
> >
> >One line from tcpdump this command while trying to associate to the AP should
> >suffice:
> >
> > tcdump -n -i qwx0 -y IEEE802_11_RADIO -s 1500 -v wlan host
> > 20:c0:47:bb:bc:4c
On Fri, Mar 01, 2024 at 07:14:17PM -0500, Philippe Meunier wrote:
> Mar 1 18:22:19 t14 /bsd: qwx0: sending assoc_req to 20:c0:47:bb:bc:4c on
> channel 40 mode 11a
> Mar 1 18:22:19 t14 /bsd: qwx0: association failed (status 18) for
> 20:c0:47:bb:bc:4c
> Mar 1 18:22:23 t14 /bsd: qwx0:
On Fri, Feb 23, 2024 at 11:58:51AM +0100, Marco van Hulten wrote:
> Today, after installing the latest snapshot, I do not get this error
> anymore. Does it contain the patch?
Yes, it should.
The latest snap's build date is newer than my commit from last night.
> Wi-Fi to normal access points is
On Thu, Feb 22, 2024 at 03:28:42PM +0100, Marco van Hulten wrote:
> On Thu, 22 Feb 2024 13:29:27 +0100 Stefan Sperling wrote:
> > Can you reproduce this on non-WPA-Enterprise networks,
> > i.e. without eduraom / wpaakms 802.1x?
>
> Did not succeed in reproducing so far.
I
On Thu, Feb 22, 2024 at 11:35:35AM +0100, Marco van Hulten wrote:
> Hello,
>
> The Qualcomm QCNFA765 (support recently added) in my ThinkPad P14s
> worked for some time, but now it mostly does not and I get these kernel
> messages:
>
> qwx0: failed to send WMI_START_SCAN_CMDID
> qwx0: failed
On Sat, Feb 03, 2024 at 10:57:37AM +0100, Stefan Sperling wrote:
> On Sat, Feb 03, 2024 at 07:26:33AM +0100, Sadeep Madurange wrote:
> > Hello,
> >
> > I installed OpenBSD on a T490. I can't connect to WiFi. I'm not sure if
> > it's because the device is not su
On Sat, Feb 03, 2024 at 07:26:33AM +0100, Sadeep Madurange wrote:
> Hello,
>
> I installed OpenBSD on a T490. I can't connect to WiFi. I'm not sure if it's
> because the device is not supported. In the dmesg I see the following line:
>
> "Intel Wi-Fi 6 AX201" rev 0x00 at pci0 dev 20 function 3
On Thu, Dec 21, 2023 at 09:23:42AM +0100, Stefan Sperling wrote:
> could you send me a pcap of 5GHz beacons from this AP?
Nothing in the beacon you sent off-list stands out.
I don't see a reason why things wouldn't work as they should.
The AP is set to country 'US' -- if this is incorr
On Mon, Jan 01, 2024 at 01:56:28AM +, Kenneth Hendrickson wrote:
> Cannot PXE Boot PC Engines APU.1D4
>
> Have tried both i386 and amd64.
> Verified that my tftpd server is working.
>
> This used to work. Now fails.
> Hardware is about 10 years old.
> Do I need new hardware??
>
> What is
On Wed, Dec 20, 2023 at 07:54:47PM +, Lévai, Dániel wrote:
> Danel Levai wrote:
> > Stuart Henderson wrote:
> > > I checked for openwrt support but your AP has a relatively uncommon
> > > Realtek SoC and it seems fairly unlikely to happen so you're probably
> > > stuck with the vendor
On Thu, Dec 07, 2023 at 03:39:33PM +, Lévai, Dániel wrote:
> Hi all!
>
> Recently my trusty T410 died (had iwn(4) in it) and had to switch to an E450
> - but this has iwm(4).
> Never had any issues with iwn(4) and iwm(4) seems to operate perfectly fine
> in some scenarios, e.g.
On Wed, Dec 06, 2023 at 03:08:09PM -0500, Daniel Ouellet wrote:
> Hi,
>
> Hopefully you may have a clue stick to offer me.
>
> I try to do a fresh install on servers that run 6.7 to 7.4, but no matter
> what I try, I get stuck.
>
> I tried previous version and I was able to load 7.3. DMESG
On Mon, Nov 13, 2023 at 11:46:14PM +0300, Samuel Jayden wrote:
> Hello Stefan(s),
>
> Thanks for your replies.
> In my setup PIN is disabled.Also I've just tried entering { ifconfig umb0
> down;ifconfig umb0 apn internet;ifconfig umb0 pin "";ifconfig umb0 up } But
> nothing comes up.
> It is
On Mon, Nov 13, 2023 at 10:03:01PM +0300, Samuel Jayden wrote:
> Hello misc,
>
> After experiencing mbim attach (from umsm) issue[*] with EM7455, I
> purchased another LTE module with a different (SIM8262E-M2) chipset. This
> time switching to mbim mode was no problem.
> However, this time it
On Tue, Nov 07, 2023 at 09:17:57PM -, Stuart Henderson wrote:
> On 2023-11-07, Devin Reade wrote:
> > I recently acquired an OnLogic Helix 330 (see [1] and [2]) and booted
> > the 7.4 install image via USB; no installation yet, no serial console
> > configured yet, no sharable dmesg yet.
> >
On Sun, Oct 22, 2023 at 05:56:28PM +0200, Pierre Peyronnel wrote:
> Hi there,
>
> Since upgrading from 7.3 to 7.4 my wireguard setup stopped working.
> Now, it might be me. Still here's what I have.
>
> Stripping down wg0.conf, I have this message as soon as I add a [Peer]
> section and its
On Tue, Oct 17, 2023 at 05:07:15AM -0400, David Higgs wrote:
> I have an underpowered amd64 VPS and attempted to (auto)upgrade it to 7.4.
> Everything went swimmingly until it attempted to relink the kernel, at
> which point it (seemingly) hung.
>
> With previous releases, I would expect the host
; > Am 15.09.2023 um 21:54 schrieb Stefan Sperling :
> > On Fri, Sep 15, 2023 at 04:55:42PM +0200, Wolfgang Oelerich wrote:
> >> Hello,
> >>
> >> recently, I „inherited“ one of Compulab‘s Fitlet3. I received it with
> >> Linux Mint installed and found all
On Fri, Sep 15, 2023 at 04:55:42PM +0200, Wolfgang Oelerich wrote:
> Hello,
>
> recently, I „inherited“ one of Compulab‘s Fitlet3. I received it with
> Linux Mint installed and found all 4 available Ethernet ports working:
> 2 of its extensional FACET card and 2 of Intel‘s Elkhart Lake Atom
On Wed, Sep 13, 2023 at 01:38:30AM +, 0x1eef wrote:
> The only feature not working out of the box was wifi. But you
> can buy a USB dongle to compensate for that.
Laptops with built-in Intel wifi will give you 11ac with up to 300
(three hundred) Mbit/s. Any of AX200/AX201/AX210/AX211 will
On Fri, Jul 28, 2023 at 03:32:38PM +0200, Marco van Hulten wrote:
> Doesn't work:
> - Wi-Fi (soldered)
> "Qualcomm QCNFA765" rev 0x01 at pci2 dev 0 function 0 not configured
This is being worked on but will still take a while (not sure how long).
On Thu, Jul 13, 2023 at 08:49:06AM -0500, Brian Conway wrote:
> On Thu, Jul 13, 2023, at 12:40 AM, Yoshihiro Kawamata wrote:
> > Of the recently announced OpenBSD 7.3 patches 006 through 009,
> > 008 cannot be found on CVSweb.
> >
> > And even after cvs update, sys/kern/exec_elf.c remains unfixed.
On Wed, Jul 12, 2023 at 06:28:47PM +0200, Matthias Pressfreund wrote:
> Why does 'cvs diff -D...' on the OPENBSD_7_2 branch
> include changes from before the given date?
Because cvs -D resolves to the most recent revision no later than
the given date, and the OPENBSD_7_2 tag contains files that
On Wed, Jun 28, 2023 at 09:53:38AM +0200, Jiri Navratil wrote:
> 3) The sites I'm configuring are both using PPPoE. One have VLAN and I
> see external statical IPv4 on PPPoE, but other site uses NAT 1:1, so I
> see private IPv4 on PPPoE, but I have to access it over allocated
> external IPv4. I'm
On Mon, May 29, 2023 at 10:13:30PM +1200, Avon Robertson wrote:
> $ fgrep -e AR9485 *
> ar9003reg.h:#define AR9485_PHY_65NM_CH0_TOP2 0x16284
> ar9003reg.h:#define AR9485_PHY_CH0_XTAL 0x16290
> ar9003reg.h:/* Bits for AR9485_PHY_65NM_CH0_TOP2. */
> ar9003reg.h:#define
On Wed, May 24, 2023 at 04:37:00PM +, Francesco Toscan wrote:
> Hi misc@,
>
> I'm going to migrate a FreeBSD ZFS-based fileserver to a OpenBSD 7.3
> UFS-based one.
> In order to comply with regulations, part of data must be encrypted;
> regulations also dictate that I have to be able to
On Wed, May 10, 2023 at 01:41:47PM +1000, Stuart Longland wrote:
> delivery. I've certainly coaxed Taylor UUCP to work over SSH in the
> past, and it does work just fine. Not sure if OpenBSD has a built-in
> UUCP, but that is an option. It'd solve my immediate problem… but I
> figure if they're
On Fri, May 05, 2023 at 03:42:37AM +1000, Damian McGuckin wrote:
> On Thu, 4 May 2023, Stefan Sperling wrote:
>
> > The edgerouter 6p works with OpenBSD/octeon and has a rackmount bracket.
>
> Wow. And it has a serial port. with an RJ45 connector. Hopefully the RS232
&g
On Thu, May 04, 2023 at 09:45:27AM -0400, David Higgs wrote:
> On Thu, Apr 20, 2023 at 1:30 AM fRANz wrote:
>
> > On Wed, Apr 19, 2023 at 11:30 AM Martin Schröder
> > wrote:
> >
> > > https://www.pcengines.ch/eol.htm
> > > The end is near for APUs :-(
> >
> > :(
> > Happy apu2 & apu4 user here.
On Mon, Apr 17, 2023 at 05:23:05PM -0700, Jonathan Thornburg wrote:
> *Summary*
> I have a PC Engines APU2 with a wierd problem: on power-on it starts
> executing the PC Engines coreboot as it should, loads the OpenBSD boot
> loader, and the OpenBSD boot loader then loads an OpenBSD kernel (either
On Sat, Apr 08, 2023 at 11:07:59AM -0500, rea...@catastrophe.net wrote:
> I'm running 7.2 with an iwm(4) controller connected to a 2.4Ghz network.
>
> Every few days the device loses connectivity and can't rejoin the network
> without a reboot.
>
>
> /var/log/messages shows this:
>
> iwm0: hw
On Thu, Feb 09, 2023 at 08:39:50AM -0300, Crystal Kolipe wrote:
> On Thu, Feb 09, 2023 at 06:51:54AM +0100, Martin Kjr Jrgensen wrote:
> > That's what I gathered so far, but I could have been wrong or not
> > up-to-date. There have been some work on the ieee80211(9) lately.
>
> I've just done a
On Thu, Dec 29, 2022 at 04:05:44PM +0100, Jurjen Oskam wrote:
> > It has been this way since day-1 of -B -- unclear if you want to call
> > it expected, feature or bug :-)
>
> Ah, thanks! No need to dive into it then, and hopefully this thread
> will pop up in searches for others running into the
On Tue, Nov 15, 2022 at 01:07:04PM +0100, Rafael Sadowski wrote:
> On Sat Nov 12, 2022 at 09:01:58AM +0100, Rafael Sadowski wrote:
> > Hi misc@
> >
> > Can anyone recommend the "Lenovo ThinkPad X1 Carbon G10 21CB00B9GE" with
> > OpenBSD and has experience with it? Would appreciate any reports of
On Wed, Sep 28, 2022 at 02:27:48PM +, Mikolaj Kucharski wrote:
> Hi,
>
> I'm using PC Engines for years. I have many of them. I want to buy more,
> but they are not available on their main web site. I'm still planning to
> buy them the moment they will show up on
On Sat, Sep 17, 2022 at 09:17:03PM +0200, Quentin Schibler wrote:
> I have a laptop using an AX210 network card (no ethernet),
> which is supported by -current, but not by 7.1.
> I installed 7.1 without configuring network,
> rebooted, and dumped the iwx firmware
> 20220708 onto a USB key.
>
> I
On Wed, Aug 31, 2022 at 09:28:56AM +, O'Brien, Orla wrote:
> Hello,
>
> My team in Dell Technologies are looking to use your software OpenSSH Client
> 9 and OpenSSH Server 8. To do this our Cyber Security department require that
> we sign a Non-Disclosure Agreement with you. Who would be
On Thu, Aug 18, 2022 at 02:06:47PM +0100, void wrote:
> Hello misc@,
>
> I have an edgerouter lite 3 router running openbsd 7.1 octeon. The
> connection is via pppoe and has native ipv4 and ipv6.
> The router gets an ND /64 and PD /48. The /48 is served on the
> LAN-facing side.
>
> This setup
On Wed, Jul 06, 2022 at 11:21:29AM +0300, Ioan Bizău wrote:
> Yup, I noticed that after checking the commit history. But I was wondering
> how I can get a newer snapshot of the driver running in 7.1. I thought
> fw_update would help if I get the snapshot from
>
On Wed, Jul 06, 2022 at 09:50:34AM +0300, Ioan Bizău wrote:
> Hi there!
>
> Trying to get OpenBSD running the the Framework laptop. The issue seems to be
> the AX210 wireless card which is not supported by the iwx driver that comes
> with 7.1.
AX210 is only supported in -current.
Run
On Mon, Jun 20, 2022 at 11:41:05PM +0100, Julian Smith wrote:
> Recently i got really confused after removing a 'join ... ' line
> from /etc/hostname.iwn0, then running `sh /etc/netstart`. This resulted
> in reconnection to , even though was now not mentioned
> anywhere in /etc/hostname.iwn0.
>
On Wed, Jun 15, 2022 at 03:38:15AM +0200, Christian Schulte wrote:
>
>
> On 14.06.22 11:36, Stefan Sperling wrote:
> > I don't know what SYSASSERT 0x0005 is supposed to tell us. All
> > I can do is make guesses based on what changed between 7.0 and 7.1.
> >
>
On Tue, Jun 14, 2022 at 03:11:35AM +0200, Christian Schulte wrote:
> See attached files.
Thank you. I still don't have a definite clue. It looks as if we
are failing to send out the initial AUTH frame on Tx queue 0 but
it is unclear why.
The commands we are sending up to this point seem to be
On Mon, Jun 13, 2022 at 02:45:23AM +0200, Christian Schulte wrote:
>
>
> On 12.06.22 13:22, Stefan Sperling wrote:
> > On Sun, Jun 12, 2022 at 01:16:00PM +0200, Stefan Sperling wrote:
> > > On Sun, Jun 12, 2022 at 10:28:33AM +0200, Christian Schulte wrote:
> >
On Sun, Jun 12, 2022 at 01:16:00PM +0200, Stefan Sperling wrote:
> On Sun, Jun 12, 2022 at 10:28:33AM +0200, Christian Schulte wrote:
> > Please see attached dmesg and pcidump. There has been a similar issue with
> > the if_iwm.c driver. Maybe this one is related.
>
> These
On Sun, Jun 12, 2022 at 10:28:33AM +0200, Christian Schulte wrote:
> Please see attached dmesg and pcidump. There has been a similar issue with
> the if_iwm.c driver. Maybe this one is related.
These are seperate drivers so it is unlikely that these issues would
be related.
How many different
On Fri, Jun 10, 2022 at 01:21:53PM -, Stuart Henderson wrote:
> On 2022-06-10, Moritz Röhrich wrote:
> > In the end I don't think there is a right answer without defining
> > what purpose the list should serve. If it's an insider game for the
> > devs, documenting all the places where OpenBSD
On Wed, Jun 01, 2022 at 12:32:45AM +0100, Chris Narkiewicz wrote:
> > Can you please apply this patch, boot the resulting kernel, and
> > show me the new line that now appears in dmesg? It will show us
> > the antenna configuration of your device.
>
> So I applied the patch and this is the
On Mon, May 30, 2022 at 11:58:23PM +0100, Chris Narkiewicz wrote:
> > Do you see this problem with every access point, or just a specific one?
>
> I tried 2 APs with the same result.
>
> > Do see the problem while forcing 11n/11ac off? To do this you could try
> > forcing the driver into 11a
On Mon, May 30, 2022 at 09:19:18PM +0100, Chris Narkiewicz wrote:
> Dnia Mon, May 30, 2022 at 10:09:19AM +0200, Stefan Sperling napisał(a):
> > A likely reason is that this device is mis-detected and we are loading
> > the wrong firmware image.
> > Please boot Linux with iwlwi
On Mon, May 30, 2022 at 02:09:23AM +0100, Chris Narkiewicz wrote:
> I got my hands on StarLabs StarLite laptop and I'm stuck with iwm
> driver issue.
>
> I bootstrapped iwm-firmware-20220111.tgz and it seems to detect
> Intel AC 9560, firmware is loaded. But when the interface is configured,
>
On Tue, Apr 19, 2022 at 12:23:31PM -, Stuart Henderson wrote:
> On 2022-04-18, Maksim Rodin wrote:
> > Hello,
> > I am trying to build mod_auth_kerb for apache2 on OpenBSD 6.9
> > I installed heimdal-libs-7.7.0p0 and downloaded the latest src for
> > mod_auth_kerb from github
> > After
On Thu, Apr 14, 2022 at 09:26:41PM -, Stuart Henderson wrote:
> I have some OpenBSD guests in Proxmox VE 7.1-7 (pve-qemu-kvm_6.1.0) and
> seeing pretty bad clock drift (50 seconds in ~7h uptime). ntpd can't cope
> with it. From boot:
>
> 2022-04-14T13:58:19.844Z ntpd[26996]: adjusting local
On Wed, Mar 16, 2022 at 03:58:59PM +0100, Stefan Sperling wrote:
> APs not showing up in the 5GHz band has always been a problem on
> Intel cards. It goes back to older drivers like iwn(4) or perhaps
> even ipw(4).
Oops, I meant wpi(4), not ipw(4) :) (ipw is 11b only)
On Wed, Mar 16, 2022 at 07:56:20AM -0500, rea...@catastrophe.net wrote:
> On Wed, Mar 16, 2022 at 10:11:50AM +0100, Stefan Sperling wrote:
> >Looks like a firwmare or driver issue to me.
> >
> >Sorry, without having a reproducible test case in front of me, there
> &g
On Tue, Mar 15, 2022 at 02:50:29PM -0500, rea...@catastrophe.net wrote:
> Ok, please see the following. The card is cleared of its monitor config then
> put onto channel 132 in debug mode.
>
> # ifconfig iwm0 -chan
> # ifconfig iwm0 -mediaopt monitor
> # ifconfig iwm0
> iwm0: flags=8806 mtu 1500
On Tue, Mar 15, 2022 at 09:09:57AM -0500, rea...@catastrophe.net wrote:
> Yes you did, and I greatly appreciate it. However, the interface won't
> join to anything once out of monitor mode.
>
> # uname -a
> OpenBSD server.example.org 7.0 GENERIC.MP#5 amd64
>
> # ifconfig iwm0 mediaopt monitor
On Tue, Mar 15, 2022 at 08:02:07AM -0500, rea...@catastrophe.net wrote:
> On Mon, Mar 14, 2022 at 11:37:15PM +0100, Stefan Sperling wrote:
> >In the implementation, the mode determines which channels are available,
> >not the other way around.
> >And for some reason your inter
On Mon, Mar 14, 2022 at 05:16:32PM -0500, rea...@catastrophe.net wrote:
> Trying to manually monitor channel 132, I get an error, SIOCS80211CHANNEL.
>
> # ifconfig iwm0
> iwm0: flags=8802 mtu 1500
> lladdr 80:19:34:ab:ab:ab
> index 5 priority 4 llprio 3
> groups: wlan
>
On Mon, Mar 14, 2022 at 04:07:33PM -0500, rea...@catastrophe.net wrote:
> Just sitting around doing nothing I'm seeing 30% loss to my next hop.
>
> # ifconfig iwm0
> iwm0: flags=808843 mtu 1500
> lladdr 80:19:34:ab:ab:ab
> index 5 priority 4 llprio 3
> groups: wlan egress
>
On Mon, Mar 14, 2022 at 03:05:00PM -0500, rea...@catastrophe.net wrote:
> On Mon, Mar 14, 2022 at 08:58:01PM +0100, Stefan Sperling wrote:
> >On Mon, Mar 14, 2022 at 02:34:29PM -0500, rea...@catastrophe.net wrote:
> >> Well, even after adding iwm0 I notice high latency and pa
On Mon, Mar 14, 2022 at 02:34:29PM -0500, rea...@catastrophe.net wrote:
> Well, even after adding iwm0 I notice high latency and packet loss anywhere
> from 15-50%. This occurs randomly when the device is either 2m, 10m, or 30m
> away from the access point. I did testing to verify I'm seeing
On Mon, Mar 14, 2022 at 04:58:07AM +0100, Nicolas Goy wrote:
> I actually have an OpenWRT box (LTE SMS gateway, the LTE modem wasn't
> compatible with OpenBSD when I installed it), and yeah, it is very
> decent. I guess that would be a viable alternative.
It is possible to install OpenWRT on some
On Fri, Mar 11, 2022 at 02:41:05PM -0600, rea...@catastrophe.net wrote:
> >If not, consider hunting down a mini PCIe iwm(4) 7260 card, or an
> >M.2 AX200 iwx(4) card with an adapter from M.2 to mini PCIe.
> >Both would need compatible pigtails and antennas as well.
>
> Thanks, I'll get a 7260. Do
On Fri, Mar 11, 2022 at 10:57:56AM -0600, rea...@catastrophe.net wrote:
> I'm using a Panda Express USB WiFi dongle on a PC Engines apu4 machine.
This is a strange choice on an APU. Such dongles are really a last
resort, they tend to suffer from cooling issues and small antennas,
and OpenBSD only
On Sat, Jan 29, 2022 at 02:28:59AM +, jkinne...@yahoo.ca wrote:
> Hello,
>
> I would like to know if the OpenBSD project has any supports for a student
> that would like to spend a semester contributing to an open source project?
> I am coming from an arts and long time Linux user
On Sun, Jan 16, 2022 at 02:34:54PM -0800, Chris Cappuccio wrote:
> holy crap, rather than maintain the drivers and net80211 layer, they are just
> building compat for the linux version?
Yes. Any complex problem can be solved by adding another layer
of indirection ;)
I first heard of this idea at
On Wed, Dec 29, 2021 at 05:22:19PM -0500, openbsd-m...@pyr3x.com wrote:
> Hello,
>
> I'm using full disk encryption via the softraid subsystem and bioctl with a
> keydisk. I have a second drive that I'm backing up the root filesystem to
> via ROOTBACKUP=1 and the proper fstab entry.
>
> I'd like
On Fri, Dec 17, 2021 at 02:14:31PM -0700, Jeff Ross wrote:
> Hi all,
>
> Trying to replace an rsu usb wifi adapter with one that is a little more
> resilient because the rsu locks up about 4 or 5 times a day and it takes a
> reboot to get it to come back.
>
> Full dmesg follows but on both this
On Tue, Dec 14, 2021 at 12:49:14PM +, Dave Turner wrote:
> I have searched the web and tried various things but so far nothing
> fixes it.
This should help: https://marc.info/?l=openbsd-bugs=163459084214897=2
On Sat, Nov 20, 2021 at 04:04:25PM +, Patrick Harper wrote:
> You need to get the authors to change the license to an acceptable one
> first, as GPL won't cut it. https://www.openbsd.org/policy.html
The rtw89 driver is already dual-licensed as GPL/BSD via:
SPDX-License-Identifier: GPL-2.0 OR
On Sun, Nov 14, 2021 at 10:40:28PM +0100, na...@poczta.fm wrote:
> Hi misc@,
>
> While testing the U-blox MPCI-L210 LTE modem on OpenBSD -current
> (the modem is attached as a cdce(4) device, the router mode is enabled;
> other modes are also available), I noticed that the automatic
On Wed, Nov 03, 2021 at 08:34:19AM -0600, Theo de Raadt wrote:
> I do not think it is the errata, because they are completely unrelated
> to 802.11 drivers or stack. You can look at the errata closer and
> realize it has nothing to do with wifi.
>
> I suspect your firmware was updated. Or you
On Wed, Nov 03, 2021 at 03:36:38PM +0200, Doros Eracledes wrote:
> Hi,
>
> my iwm0 on my Lenovo T490 stopped working right after installing 7.0
> patches 001,002 and 003 and rebooting. I "takes" an ip from the router but I
> can't ping the router.
>
> I then tried with a USB urtwn and it worked
On Sun, Oct 31, 2021 at 11:36:21PM +0530, rahul deshmukh wrote:
> Hi Team,
> I have configured OpenBSD as wireless access point but somehow i am unable
> to connect to access point from mobile or other clients. below is my config.
>
> myhost$ cat /etc/hostname.ral0
>
>
> media autoselect mode
On Sun, Oct 24, 2021 at 03:01:29PM +, Martin wrote:
> Patch has been updated to use correct files and tested on a live system.
> Please add it to tree.
>
> Thanks.
Committed now. Thank you! Sorry it took so long.
On Mon, Oct 25, 2021 at 05:45:22PM +, Laura Smith wrote:
> I'm struggling a bit as to what I need to do next here.
>
> Any time in the past I've connected a USB stick etc. to OpenBSD, everything
> happened automagically in terms of recognition and assigning a /dev/sd.
>
> However this time,
On Mon, Oct 25, 2021 at 03:57:53PM +0900, Sardor Muminov wrote:
> Hello developers,
>
> I own one of the Thinkpad X1 Carbon Gen 7 series laptops.
> I have installed OpenBSD 7.0 and couldn't get the wireless connection to
> work.
>
> Below is a link to the dmesg[1] and pcidump[2] output.
>
> 1.
On Fri, Oct 22, 2021 at 06:53:17PM +, Martin wrote:
> Hi there!
>
> I have an issue with athn USB stick with modern wifi devices like Android
> phones etc.
>
> I've set up athn0 as previous athn miniPCI-e cards (/etc/hostname.athn0,
> /etc/dhcpd.conf, /etc/pf.conf). No IP address given by
On Fri, Oct 22, 2021 at 07:02:20PM +, Martin wrote:
> Hi Stefan,
>
> Dev. patches to implement into source tree to recognize automatically Sony
> UWA-BR100 devices based on AR9280+AR7010.
This patch is changing the wrong files.
It should change the files 'usbdevs' and if_athn_usb.c only.
On Sun, Oct 17, 2021 at 07:14:59PM +0200, Jan Stary wrote:
> Right. I have had this problem with some Thinkpads. According to
> https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/b40_b50_rn_eu.pdf
> the whitelist for this Lenovo B50-30 is
>
> • 3160NGW
> • BCM943142Y
>
On Sun, Oct 17, 2021 at 05:21:24PM +0200, Stefan Sperling wrote:
> Most iwm(4) cards (7265 up to 9560), and iwx(4) AX200 (not the AX201,
> which is cnvi instead of M.2 but looks the same).
Correction; The iwm 9560 uses cvni as well and won't work.
All this applies only if there isn't som
On Sun, Oct 17, 2021 at 05:05:19PM +0200, Jan Stary wrote:
> This is current/amd64 on a Lenovo B50-30 (full dmesg below).
> Everything seems to run fine, except the wifi is unsupported.
>
> "Atheros AR9565" rev 0x01 at pci4 dev 0 function 0 not configured
> ugen1 at uhub1 port 4 "Atheros
On Sat, Oct 16, 2021 at 01:40:55PM +0200, Jan Stary wrote:
> Would people now recommend running an AP "natively",
> i.e. a wifi card (plus the anthenas) on and OpenBSD box
> over running wifi over a dedicated device?
Not if you want a modern 11ac/ax AP. There is no driver which supports
hostap
On Fri, Oct 15, 2021 at 10:25:17AM -, Rubén Llorente wrote:
> Hi there!
>
> I am wondering how does people around here keep local branches of the ports
> tree for personal use.
>
> The reason I am asking is because I keep some patched ports which are suited
> to solve my problems, but not
On Thu, Aug 26, 2021 at 06:20:08AM -0300, Crystal Kolipe wrote:
> On Thu, Aug 26, 2021 at 02:47:40AM +, iio7 wrote:
> > Any caveats to look out for?
>
> There is an issue with httpd and large file uploads, ( > ~ 600 Mb), which was
> introduced sometime after OpenBSD 6.1.
>
> We had a system
On Thu, Aug 19, 2021 at 06:42:25PM +0100, Étienne wrote:
> On 31/07/2021 19:27, Stefan Sperling wrote:
> > On Sat, Jul 31, 2021 at 07:02:35PM +0100, Étienne wrote:
> > > On 30/07/2021 04:37, Theo de Raadt wrote:
> > > > dhcpleased (and a few other daemons)
On Sat, Jul 31, 2021 at 07:02:35PM +0100, Étienne wrote:
> On 30/07/2021 04:37, Theo de Raadt wrote:
> > dhcpleased (and a few other daemons) use bpf, thus see raw packets
> > from the wire before pf can block them. Most daemons of this type
> > also use bpf to send packets, and pf doesn't see
On Fri, Jul 30, 2021 at 04:59:03AM +, beebeet...@posteo.de wrote:
> Thanks Theo for the answer!
>
> I'm still having difficulty wrapping my head around it.
>
> I have two packets: DHCPREQUEST and DHCPACK
> {timestamp} {my_ip}.68 > {ip1}.67: xid:0xfe51c9a3 [|bootp]
> {timestamp} {ip2}.67 >
On Wed, Jul 14, 2021 at 11:38:15AM +0200, Tom K wrote:
>
> > > but why? If I reboot the other node, the system become MASTER.
> >
> > That is because the other system stops sending carp announcements
> > when you reboot it. This is unrelated to the demote counter. The demote
> > counter only
1 - 100 of 926 matches
Mail list logo
