Re: Enhancing Privacy in 2020 attached screenshot

2020-12-20 Thread Aaron Mason
ffect-shows-why-some-people-think-they-re-gr.html > First rule of Dunning-Kruger club is you don't know you're in Dunning-Kruger club. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Advice on using intrusion detection

2020-11-24 Thread Aaron Mason
bit fibre connection". Yes, really. Bypassing the IDS/IPS actually led to better performance - or at least better numbers on the speed test. You got some 'splaining to do, Sophos. > One nifty thing I have found in "rolling my own" is that I found > a lot of little oddities,

Re: OBSD 6.8 vlan communication issues

2020-11-11 Thread Aaron Mason
0.79/2410.10.79.1 UCPn 01 - 4 aggr0 > > 10.10.79/2410.10.79.0 UCPn 00 - 4 vlan79 > > 10.10.79.0 fe:e1:ba:d0:f4:8c UHLl 0 0 - 1 vlan79 > > 10.10.79.1 fe:e1:ba:d0:f4:8c UHLl 0

Re: OBSD 6.8 vlan communication issues

2020-11-11 Thread Aaron Mason
UHLl 0 184 - 1 re0 > 192.168.7.255 192.168.7.4UHb00 - 1 re0 > > > the pf rules when pf enabled > > pfctl -sr > block return all > pass all flags S/SA > block return in on ! lo0 proto tcp from any to any port 6000:6010 > block return out log proto tcp all user = 55 > block return out log proto udp all user = 55 > pass out log on aggr0 inet proto icmp from 10.10.70.0/24 to any label > "pings" > pass out log on aggr0 inet proto icmp from 10.10.77.0/24 to any label > "pings" > pass out log on aggr0 inet proto icmp from 10.10.79.0/24 to any label > "pings" > pass in on vlan70 all flags S/SA label "vlan70" tag vlan70 > pass out on vlan70 all flags S/SA label "vlan70o" tag vlan70o > > sysctl for ip forwarding is set > > net.inet.ip.forwarding=1 > > What is your management VLAN set to on the switch? Did you set up those ports in a LAG as well as on those VLANs? -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: chromium has troubles showing videos from youtube

2020-11-10 Thread Aaron Mason
romium the > behavior is > still the same. > > does anybody else observing this? or is it just me? > > -- > With best regards, >Gregory Edigarov > Hi If you open up the developer console and start a video, do you see any requests that end in an error in the Network tab?

Re: Multiple USB NICs

2020-10-19 Thread Aaron Mason
achine would be the dhcp server. > You could run scripts to set the IP address based on the MAC with this in each hostname.axenN file: !/path/to/script axeN And then write that script to pick the IP address based on the MAC. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Understanding download speed reduction by introducing an inline Ubiquity ERL device

2020-10-07 Thread Aaron Mason
on increasing regularly: > >> kern.netlivelocks=57911 > >> > >> netstat -m: > >> > >> 1009 mbufs in use: > >> 917 mbufs allocated to data > >> 5 mbufs allocated to packet headers > >> 87 mbufs allocated to socket names and a

Re: Bluetooth adapter that works with OpenBSD

2020-09-21 Thread Aaron Mason
tested working with > OpenBSD? > Hopefully you can guide me. > Thanks so much. No Bluetooth in OpenBSD, I'm afraid. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Creating a Partition for RAID Arrays

2020-09-16 Thread Aaron Mason
. If you're not storing anything on it, there's no reason to have one at all, just create the directory in your root filesystem. Is there a reason you can't just do that? -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: How to split install.wim

2020-09-02 Thread Aaron Mason
t would be totally foreign territory to most Windows admins most > likely. > Sadly, this very sensible approach didn't occur to Microshaft, either. As a consequence, the ISO isn't a hybrid one - "burning" the ISO to a USB stick doesn't work. -- Aaron Mason - Programmer, open source

Re: How to split install.wim

2020-09-01 Thread Aaron Mason
ll have to use > > 7z e Win10_2004_English_x64.iso > > command to extract the files from the iso image provided by Microsoft. > > Best, > Predrag > You would be better to use NTFS than muck around with splitting the installer file. Pretty sure it needs to be NTFS to boot an

Re: Microsoft's war on plain text email in open source

2020-08-26 Thread Aaron Mason
rted it to vanilla JS. It's not that hard. Also, I use gmail with an old account that got overtaken by spam that I use for mailing lists as well, and it handles patches just fine. Never been an issue. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-18 Thread Aaron Mason
come up on the tcpdump while it was running? Maybe there's a clue there. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Tunefs(8)

2020-08-16 Thread Aaron Mason
On Tue, Aug 11, 2020 at 2:07 AM Rupert Gallagher wrote: > > Omit the last line of the manual, because there is no need for it. > Well of course there's no need for it, but why on Earth should that mean that it shouldn't be there? -- Aaron Mason - Programmer, open source addict I've

Re: Bug? having no monitor plugged in causes a reboot in bsd.rd

2020-07-19 Thread Aaron Mason
s my machine after a few seconds. > Any tips on how I can inspect what is going on here? > > -alfred It might help if we knew a bit more about your system. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Shell account service providers

2020-07-15 Thread Aaron Mason
On Thu, Jul 16, 2020 at 11:53 AM Ibsen S Ripsbusker wrote: > > Are there services that sell managed OpenBSD shell accounts? > I mean a service similar to sdf.org. > What are you looking for in such a service? -- Aaron Mason - Programmer, open source addict I've taken my s

Re: OpenBSD master volume GUI TCL, how to contribute?

2020-07-01 Thread Aaron Mason
any changes needed, and anyone who wants to can suggest improvements and report bugs. >From there, if you (or anyone) wants to submit a port, they've got a central place to pick up the latest version. If you wanted to do this yourself, your best bet is to look for any ports that have TCL as

Re: OpenBSD Readonly File System

2020-06-24 Thread Aaron Mason
r loss so far. > > So while it was not possible for me to not make any unsupported > modifications at all, I think it is a very small change compared to > have read only filesystems. Anyone who knows OpenBSD, will be able to > manage the firewall without special instructions. > > > Regards, > Mogens Jensen > Auto filesystem repair is bad juju. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Disabling OpenBSD Login Prompt

2020-06-10 Thread Aaron Mason
re dump > checking quotas: done. > clearing /tmp > kern.securelevel: 0 -> 1 > creating runtime link editor directory cache. > preserving editor files. > starting network daemons: sshd. > starting local daemons: cron. > Wed Jun 10 10:27:04 +03 2020 > > > > > > Also, I tried "chsh" and "chpass" , but still OpenBSD login prompt appears.. > How can I overcome this issue? > > > > Thanks.. Are you able to access other terminals after boot (i.e. Ctrl+Alt+F2)? -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Article OpenBSD: Not Free Not Fuctional and Definetly Not Secure and BSD, the truth blog

2020-05-27 Thread Aaron Mason
On Thu, May 28, 2020 at 2:21 PM Aaron Mason wrote: > > On Thu, May 28, 2020 at 2:20 PM Quantum Robin > wrote: > > > > Hi, > > > > While surfing on the Google to learn more about OpenBSD, I encountered this > > one: "OpenBSD: Not Free Not Fu

Re: Article OpenBSD: Not Free Not Fuctional and Definetly Not Secure and BSD, the truth blog

2020-05-27 Thread Aaron Mason
the author telling the truth? Or just yet another anti-BSD thing? If it has to tell you it's "the truth" in its title, it probably isn't. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Help, i want to ask if my Asus Vivobook Ryzen 3 , Vega 3 can run openbsd

2020-05-24 Thread Aaron Mason
> I think this laptop can boot only efi partitions There's only one way to find out... -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: LDAP database choice

2020-05-20 Thread Aaron Mason
On Thu, May 21, 2020 at 2:31 AM Aisha Tammy wrote: > > Hi all, > Is there any particular reason why ldapd has its own version of btree.c > instead of using the db.h standard btree ? > > Aisha > Probably. -- Aaron Mason - Programmer, open source addict I've taken my sof

Re: freeze on startup

2020-05-16 Thread Aaron Mason
On Sun, May 17, 2020 at 4:32 AM Joseph A Borg wrote: > > I can boot into bsd.rd, which I assume to be still at version 6.5 > Don't assume, find out. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: fw_update verify firmware?

2020-05-14 Thread Aaron Mason
pisode 4: A New Flaw - http://marc.info/?l=openbsd-misc=125783114503531=2 Episode 5: The Firmware Strikes Back: http://marc.info/?l=openbsd-misc=126775051500581=2 Episode 6: Return of the Vendor: http://marc.info/?l=openbsd-misc=128779369427908=2 -- Aaron Mason - Programmer, open source addict

Re: Secure end points for Internet tunnel, the most secure hardware

2020-05-12 Thread Aaron Mason
r router and any non-internet facing services on other systems behind it, and not making silly decisions like password based root logins (or any login for that matter) and employing a default permit policy on your firewall are a good start. Anything else is service-specific. -- Aaron Mason - Prog

Re: Secure end points for Internet tunnel, the most secure hardware

2020-05-11 Thread Aaron Mason
can't speak to the blobbiness, though. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: OpenBSD insecurity rumors from isopenbsdsecu.re

2020-05-07 Thread Aaron Mason
On Fri, May 8, 2020 at 2:30 AM jeanfrancois wrote: > > As long as there's no material published it's worth just any other word. > To quote Douglas Adams on whether you can trust people on the internet, "of course not, it's just people talking". -- Aaron Mason - Programmer,

Re: More than 16 partitions

2020-04-28 Thread Aaron Mason
ey allocated in the kernel in a linear fashion? If not, you could allocate additional nodes under a spare major for the extra partitions. If so, well I'm just talking out of my arse. I'd see for myself if I could find where they're allocated. I'll have more of a deep dive later. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: MIdnight Commander won't run

2020-04-22 Thread Aaron Mason
gt; anything on this. > > Looking for a bit of help. > > Thanks, > > Jay > I find it rare that an upgrade ever goes smoothly for any OS. Have you tried running ldconfig(8)? -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: I see you guys are full of shit when it comes to one thing:

2020-04-15 Thread Aaron Mason
efit their users just because it > has a license you hate! GOD damn > > > Smell you later assholes. > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Failed to install bootblocks. You will not be able to boot OpenBSD

2020-04-06 Thread Aaron Mason
t clears one byte. You may have intended this: dd if=/dev/zero of=/dev/rsd0c bs=1M count=1 -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: mapserver httpd configuration

2020-04-05 Thread Aaron Mason
PPORTS=GEOS SUPPORTS=PBF INPUT=JPEG > INPUT=POSTGIS INPUT=OGR INPUT=GDAL INPUT=SHAPEFILE > > > In the Readme on cvs give details on chroot, but I don't know it usage for > using OpenBSD httpd > > thanks for your help. > -- > Regards, >Rashad -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Openbsd 6.6 amd64 stable bridge with 90 vlans does not forward packets after reboot

2020-03-19 Thread Aaron Mason
ge101 was 6 > > but after restarting the bridge101 the index of bridge101 was 98 > (which sounds to me like perhaps the bridge was being started before > the vlans on bootup) > > > has anyone come across this issue before? > Thanks > > > > > -- > Kindest regards, > Tom Smyth. > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Hosting a CDN question

2020-03-17 Thread Aaron Mason
he end users origin > > On March 17, 2020 3:44:27 AM GMT+01:00, Aaron Mason > wrote: >> >> You can easily "write" one in Go with 9 lines of code. And since Go >> builds static binaries, you can chroot it for security. >> >> I just did a quick test be

Re: Hosting a CDN question

2020-03-16 Thread Aaron Mason
It's worth noting that httpd didn't go over ~30% in the test, whereas the Go web server absolutely slammed the system. On Tue, Mar 17, 2020 at 1:44 PM Aaron Mason wrote: > > You can easily "write" one in Go with 9 lines of code. And since Go > builds static binar

Re: Hosting a CDN question

2020-03-16 Thread Aaron Mason
ic website content? > > If so what software did u use to set it up ? > > have a good one > Sincerely > Filip -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: experience setting up a low memory machine

2020-03-11 Thread Aaron Mason
be overkill. At previous jobs I can ManageEngine ServiceDesk Plus and even in Linux you needed 2GB minimum just for it to get out of bed. I plan on rebuilding it with 6.6 (can't update RT because packages are too old in 6.1) and might run it on 256MB for shits and giggles. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Dell Latitude e6400 OpenBSD Drive Issue

2020-02-10 Thread Aaron Mason
g-mounted screw and a slide clip holding the bottom in place. The E6420 with its eleventy billion screws on the base (none held in place with anything) was a major step backwards, but still easier than many business-grade laptops I'd seen. > > Good luck, > -Adam > -- Aaron Mason - Programm

Re: [drm] *ERROR* [CRTC:41:pipe ] flip_done timed out

2020-02-05 Thread Aaron Mason
> > ThinkPad R61i > > regards > > Kris > > > > -- > Sent from: http://openbsd-archive.7691.n7.nabble.com/openbsd-user-misc-f3.html > Thanks, that's very helpful. For shits and giggles, say we disable inteldrm: boot> boot -c [...] UKC> disable in

Re: [drm] *ERROR* [CRTC:41:pipe ] flip_done timed out

2020-02-04 Thread Aaron Mason
[CONNECTOR:51:SVIDEO- ] flip_done timed out > And my laptop is booting quite long time, around 5 minutes. > What I need to set or install and where to solve it? > > > BR > Jacek Kowalczyk > http://jacekkowakczyk82.github.ii > > > -- Wysłane za pomocą K-9 Mail. > Ca

Re: How to hide my server's IP?

2020-02-02 Thread Aaron Mason
; > Thanks! > > Artur. > > Sent with [ProtonMail](https://protonmail.com) Secure Email. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Brand new server - bad adventures

2020-01-23 Thread Aaron Mason
t configured" to be able to boot into the system? > > > > if that was the only way (disabling inteldrm), would I repeat it each time I > > issue syspatch? > > > > And each time syspatch (re)installs the kernel, should I get the error > > "reorder_kernel: failed", because I modified (disabled inteldrm) kernel? > > > > Any words on "kbc: cmd word write error" when I tried the 'boot -c'? > > > > I thank you for your time in reading all these, > > And many thanks for your suggestions, in advance! > > > > Best, > > Özgür Kazancci > > -- > Andreas (Kusalananda) Kähäri > SciLifeLab, NBIS, ICM > Uppsala University, Sweden > > . > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: install libreoffice OpenBSD 6.6

2020-01-22 Thread Aaron Mason
rollador Software Libre > Cel: (57) 3165387562 > Git: https://gitlab.com/bit4bit > Fossil: https://efossils.somxslibres.net > E-Sitio: https://www.somxslibres.net > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: What is you motivational to use OpenBSD

2020-01-12 Thread Aaron Mason
GitHub repo wiki. As a case study, at previous jobs I ran ManageEngine ServiceDesk Plus on Windows Server, and the whole required 2GB of RAM minimum. My pokey little RT server has 512MB of RAM and it's all it has ever needed. -- Aaron Mason - Programmer, open source addict I've taken my s

Re: Iked dead-peer-detection and DynDNS

2020-01-08 Thread Aaron Mason
I'd greatly appreciate any help ! > > Best regards, > Stephan > Maybe try using ifstated(8) to ping a host on your home network and restart iked to re-establish the tunnel when the tunnel falls over. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Leaving OpenBSD (with patch)

2020-01-08 Thread Aaron Mason
> diff -u -p -r1.238 faq1.html > > --- faq1.html 2 Oct 2019 15:40:06 - 1.238 > > +++ faq1.html 8 Jan 2020 16:12:30 - > > [SNIP] > > > > > I'd probably add a note to say something along the lines of "this isn't the airport, no need to

Re: Riello IPG 800 USB Driver and NUT

2020-01-07 Thread Aaron Mason
scovering the UPS via the USB interface. > > > > > Thank you for your consideration, > > > > -- > > Marcos Madeira > Just a thought... IIRC on laptops you can access battery info in sysctl(8) - charge level, charge remaining, whether it has AC input, etc. Could you do the same here? -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: dmesg for Riverbed Steelhead 250/550

2019-11-24 Thread Aaron Mason
beating that level of bang for buck. > Regards > > > > Le mardi 19 novembre 2019 à 03:45:11 UTC+1, Aaron Mason > a écrit : > > > Here's a quick rundown on how I got it installed - you will need an > existing OpenBSD installation. > > 1. Download the FS instal

Re: dmesg for Riverbed Steelhead 250/550

2019-11-18 Thread Aaron Mason
, then plug in the power. 5. When it says to press any key, do so. When the GRUB menu appears, hit 'c'. 6. Set the root device (which will likely be hd2): root (hd2) 7. Fire up the chainloader: chainloader +1 8. Boot: boot 9. ??? 10. Profit! On Tue, Nov 19, 2019 at 1:31 PM Aaron Mason wrote: > &g

dmesg for Riverbed Steelhead 250/550

2019-11-18 Thread Aaron Mason
to have a bit more oompf than the 250's hamster whee-- err, Celeron M CPU. The output for dmesg for each is attached. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse OpenBSD 6.6 (GENERIC) #298: Sat Oct 12 11:06:10 MDT 2019 dera...@i386

Re: Encrypting my keydisk

2019-10-27 Thread Aaron Mason
On Fri, Oct 25, 2019 at 12:20 PM Normen Wohner wrote: > > > > > Am 24.10.2019 um 03:27 schrieb Aaron Mason : > > > > On Wed, Oct 23, 2019 at 7:45 PM Normen Wohner wrote: > >> > >> To enable two factor encryption? > >> One passcode is in

Re: Encrypting my keydisk

2019-10-23 Thread Aaron Mason
target of the "yet to > implement" encryption of the keydisk would be the key on the keydisk > itself. > So how would the system access the key if it's encrypted? > g > > On 2019-10-22 23:40, Aaron Mason wrote: > > On Wed, Oct 23, 2019 at 5:11 AM List wrote: >

Fwd: Encrypting my keydisk

2019-10-23 Thread Aaron Mason
written at the end. > It’s hard for me to understand why nobody asked for this sooner. > You could just use a passphrase on the original disk to the same effect. No sense over-complicating things. > > Am 22.10.2019 um 23:43 schrieb Aaron Mason : > > > > On Wed, Oct 23

Re: On blindly running code

2019-10-22 Thread Aaron Mason
hat the "virtual environment == safe" > assumption was shattered so effectively, so easily, and by actions which in > most circumstances would be benign. > Been there, done that, got the t-shirt. Only in my case it was a mounted VFAT volume in my home directory. Oops. Praise th

Re: Encrypting my keydisk

2019-10-22 Thread Aaron Mason
you've really achieved is a way to, at best, slow down a potential attacker. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Companies using openbsd

2019-10-20 Thread Aaron Mason
n to you who use openbsd for their products ? > > For building let's say their own OS based upon OpenBSD ? > > Thanks for your time. > > Regards, > > Stephan > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Strong Host Model in OpenBSD network stack

2019-10-17 Thread Aaron Mason
ss of interface em0). > > > While the behaviour of Test 1 indicates that the Strong Host Model is > followed, Test 2 shows the behaviour of a "Weak Host Model". > > > What of both is actually supposed to be the default for OpenBSD? Is > there any kernel parameter to control these behaviours, like > net.inet.ip.check_interface for FreeBSD or NetBSD? > > > Thanks, > > Bastian > > > > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Softraid data recovery

2019-10-14 Thread Aaron Mason
e disks, ddrescue would be a better option than dd - it'll keep trying if it encounters another URE whereas dd will up and quit. Expect it to take several days on disks that big - it's designed to be gentle to dying disks. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: A sad raid/fsck story

2019-10-03 Thread Aaron Mason
t, > maybe the /etc/rc could warn or even perform some bioctl check on raid > array when first fsck / mount > fails. > > Cheers. > > ( Lost data recovered from backup ) -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Alix 2d13 and OpenBSD 6.5 Problems

2019-10-02 Thread Aaron Mason
ng is done. Regardless, I think > I have my answer about why it’s falling over. > > > You can disable the reordering by removing /var/db/kernel.SHA256 > > but be aware that syspatch relies on the reorder_kernel mechanism in > > order to apply kernel patches. > > Good to know. I’m going to do everything I can to avoid turning off > relinking, because I want to go on the big boy rides! :-) > > Sean > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Recommended web and database server specification

2019-08-14 Thread Aaron Mason
t; time and ready for about 60,000 visits per day at most. > > Your advise and recommendation would be greatly appreciated. Thanks so much. > > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Boot NVME device on sparc64

2019-07-30 Thread Aaron Mason
Sun t5120. > > Kind regards John. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: SCM

2019-07-28 Thread Aaron Mason
n base (after supporting a 1.x tree for years) for this very reason. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: wsmouse: disable touch-panel

2019-06-10 Thread Aaron Mason
Found an approach that might be worth considering: https://marc.info/?l=openbsd-misc=155751021025538=2 On Tue, Jun 11, 2019 at 1:07 PM Aaron Mason wrote: > > I had a similar issue with a Surface Pro 3 with a faulty touch screen > running Windaz, the solution was to disable the USB inp

Re: wsmouse: disable touch-panel

2019-06-10 Thread Aaron Mason
I had a similar issue with a Surface Pro 3 with a faulty touch screen running Windaz, the solution was to disable the USB input device for the touch screen. On OpenBSD, you could try using "boot -c" at boot to remove wsmouse[123] device from the kernel (see https://man.openbsd.org/config for

Re: hw.ncpu=1, hw.ncpuonline=1, hw.ncpufound=4

2019-04-09 Thread Aaron Mason
w.sensors.acpithinkpad0.fan0=2121 RPM > > hw.sensors.acpithinkpad0.indicator0=Off (port replicator), UNKNOWN > > hw.sensors.softraid0.drive0=online (sd3), OK > > hw.cpuspeed=2901 > > hw.setperf=100 > > hw.vendor=LENOVO > > hw.product=2392ASU > > hw.version

Re: RS-232 serial to ethernet

2019-04-08 Thread Aaron Mason
; -- > Kindest regards, > Tom Smyth > > The information contained in this E-mail is intended only for the > confidential use of the named recipient. If the reader of this message > is not the intended recipient or the person responsible for > delivering it to the recipient, you a

Re: ~OT, ARM64 becoming more useful: RK3399 laptop w M2 slot & A64 phone coming

2019-03-13 Thread Aaron Mason
aking an Allwinner A64 smartphone. > > Both these SoC:s are supported by OpenBSD. > > Some day these devices will break through their 4GB RAM cap, and some > day they'll become faster. > > And some day RISCV will take the steps ARM64 is taking now. > > This is great hetero

Re: _XSERVTransSocketUNIXAccept: accept() failed

2019-02-13 Thread Aaron Mason
tUNIXAccept: accept() failed > _XSERVTransSocketUNIXAccept: accept() failed > _XSERVTransSocketUNIXAccept: accept() failed > _XSERVTransSocketUNIXAccept: accept() failed > _XSERVTransSocketUNIXAccept: accept() failed > > > Any suggestions on how to figure out why this is happening. > > Thanks > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: SSH disconnects right after accepting

2019-02-07 Thread Aaron Mason
t; > On Fri, Feb 8, 2019, 02:03 Aaron Mason > >> Hi >> >> Does it work fine if you log in with the user's password? >> >> On Fri, Feb 8, 2019 at 11:25 AM Lars Bonnesen >> wrote: >> > >> > OpenBSD 6.4 >> > >> > Putty just

Re: SSH disconnects right after accepting

2019-02-07 Thread Aaron Mason
ug3: notify_hostkeys: key 2: ssh-ed25519 SHA256:XXX > debug3: notify_hostkeys: sent 3 hostkeys > debug3: send packet: type 80 > debug1: active: key options: agent-forwarding port-forwarding pty user-rc > x11-forwarding > debug3: sending debug message: /home/user/.ssh/authorized_keys:5: k

Re: i386 release build machines

2019-01-24 Thread Aaron Mason
st because is cool to do that. Not that matters exactly what > the project uses but I am sure you guys expect to have a build ready in a > reasonable time. > > Thanks > > -luis -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Blocking "shodan.io" - What are my options?

2019-01-10 Thread Aaron Mason
I knew it wouldn't trigger on the first attempt, but I had a sneaking suspicion that you'd need something to listen on that port. Is there a way to achieve what we seek, in that case, without userland tools? On Thu, Jan 10, 2019 at 9:18 PM Stuart Henderson wrote: > > On 2019-01-09, Aaron

Re: Blocking "shodan.io" - What are my options?

2019-01-09 Thread Aaron Mason
the man page, (with only the > src-conn-rate and port number adjusted): > > block quick from > pass in on $ext_if proto tcp to $webserver port ssh keep state \ >(max-src-conn-rate 1/10, overload flush global) > > > I havent tested this personally, but it should be adequate. > > > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Blocking "shodan.io" - What are my options?

2019-01-08 Thread Aaron Mason
I still get nothing happening if I change it to a while loop, using read to pull in the IP address. This works, though, though it assumes that the output for nc(1) will stay the same forever - it's also IPv6 ready unlike my example above: nc -vnkl 21 2>&1 | while read dummy dummy ipaddr

Re: [OpenBSD 6.4][OpenIKED] Route to IPSec tunnel?

2018-12-12 Thread Aaron Mason
to any nat-to tun0 > > However, there is no tunnel device created after the SA is established on > OpenBSD. Did I miss something to create it? > > Best regards, > Siegfried > > > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: [OpenIKED] Is it impossible to differentiate the policies by dstid?

2018-11-04 Thread Aaron Mason
0 msgid 0, 36 bytes > sa_state: SA_INIT -> CLOSED from any to any policy 'blackjack' > > If I remove the “quick” option of “blackjack” policy, all incoming connection > goes to “redheart” policy, which blocks “blackjack” users. > > Regarding to all the examples I saw, I guess dstid is not a condition to > match the policies? Only “peer” matters? > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: OpenBSD site

2018-11-01 Thread Aaron Mason
ör 27 okt. 2018 kl 11:14 skrev misc nick : > > > > > > > > I was wondering how you maintain and update such high quality content > > in OpenBSD's site. > > > > Do you manually edit html files, use a cms, or something else? I am > > asking to shamelessly > > > > copy your best practices. ;-) > > > > > > > > Thanks, > > > > Nick > > > > > > > > > > > > > -- > > > May the most significant bit of your life be positive. > > > > > > > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Problems with a quad Realtek NIC

2018-10-11 Thread Aaron Mason
nown product 0x1184 > rev 0x00: not configured by system firmware > +ppb5 at pci2 dev 7 function 0 vendor "ASMedia", unknown product 0x1184 > rev 0x00: not configured by system firmware >  Is this a driver issue or something else perhaps? Kindest regards -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: checking source with pvs-studio

2018-10-02 Thread Aaron Mason
http://www.viva64.com > > Of course, the options we suggest won't be suitable for everyone. But > that's the point of such measures. If none of the variants is relevant > to you of your product, we suggest you consider purchasing the license. Not a very wise use of time, though you could automate it if you were particularly determined. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Community-driven OpenBSD tutorials wiki?

2018-04-11 Thread Aaron Mason
On Fri, Jan 5, 2018 at 8:26 AM, Peter N. M. Hansteen wrote: > > If you think you don't have the seniority to start submitting patches > when you see a bug (even a typo in a man page or the faq), you're most > likely wrong. Your first efforts will not be perfect of course, but if

Re: bsd.rd source

2018-04-05 Thread Aaron Mason
Same place as the bsd kernel itself - they're both built from the same source. On Fri, Apr 6, 2018 at 7:29 AM, <ch...@ccmach14.org> wrote: > Hello - will someone please tell me where I can find the source for bsd.rd? > Thanks > -- Aaron Mason - Programmer, open source addic

Re: Hardware recommendations for compact 1U firewall

2017-01-09 Thread Aaron Mason
s7-signature which > had a name of smime.p7s] > I'd do this if it weren't for the fact that shipping their items to Australia costs more than their items themselves... -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Hardware recommendations for compact 1U firewall

2017-01-09 Thread Aaron Mason
On Tue, Jan 10, 2017 at 1:32 AM, Stuart Henderson <s...@spacehopper.org> wrote: > Aaron Mason wrote: >> >> Torn between a Barracuda web filter or a Portwell CAR 3000. The latter >> >> is more expensive but supports 10Gbit, whereas the Barracuda may only >&g

Re: Hardware recommendations for compact 1U firewall

2016-12-21 Thread Aaron Mason
ole keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > uhub2 at uhub1 port 1 "Intel product 0x07db" rev 2.00/0.02 addr 2 > uhub3 at uhub2 port 3 "ATEN International product 0x7000" rev 2.00/0.00 addr 3 > uhidev0 at uhub3 port 1 configuration 1 interface 0 "ATEN International product 0x2419" rev 1.10/1.00 addr 4 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 1 configuration 1 interface 1 "ATEN International product 0x2419" rev 1.10/1.00 addr 4 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (5275a7b2a0b9439e.a) swap on sd0b dump on sd0b > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Hardware recommendations for compact 1U firewall

2016-12-18 Thread Aaron Mason
Thanks for some additional fleabay search terms :) On Sat, Dec 17, 2016 at 2:59 PM, Nick Holland <n...@holland-consulting.net> wrote: > On 12/14/16 20:39, Aaron Mason wrote: >> All >> >> I'm looking for a 1U appliance that I can re-purpose into a firewall >> us

Re: Hardware recommendations for compact 1U firewall

2016-12-15 Thread Aaron Mason
A search on fleabay shows that, in Australia, they still fetch >$300, out of my price range. :( On Thu, Dec 15, 2016 at 10:30 PM, Stuart Henderson <s...@spacehopper.org> wrote: > On 2016-12-15, Aaron Mason <simplersolut...@gmail.com> wrote: >> All >> >> I'm l

Hardware recommendations for compact 1U firewall

2016-12-14 Thread Aaron Mason
ccept Fast Ethernet if my budget says no. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

2016-12-01 Thread Aaron Mason
s in softraid 5. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

2016-12-01 Thread Aaron Mason
ith only 2 DIMM slots filled: > > spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL2 > spdmem1 at iic0 addr 0x51: 256MB SDRAM non-parity PC133CL2 > spdmem2 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-6500CL5 > > Being an ordinary user, I dunno what that means, but the boxes run fine. > > Cheers! > -- > Craig Skinner | http://linkd.in/yGqkv7 > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: network address in vm by kvm - default gw

2016-11-30 Thread Aaron Mason
WAY_VM" > > I can not understand how/where to set the last 2 line 'route_netX' > Please, can someone show me how to do in OpenBSD 6.0 adm64...? > > Thanks very much for reply. > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: alternative method for "gtar --delete"

2016-11-20 Thread Aaron Mason
18 Nov 2016 14:07:45 +1100 > Aaron Mason <simplersolut...@gmail.com> wrote: > >> It's a bit long winded, but here's a possibility: >> >> # cd / >> # tar zcpvf siteXX.tgz /share/* /siteX/* >> >> # tar ztf siteXX.tgz | grep '^/share' | xargs rm -f >&g

Re: alternative method for "gtar --delete"

2016-11-17 Thread Aaron Mason
/share/etc/pf.conf > /share/etc/vi.exrc > /share/usr/X11R6/lib/X11/fonts/TTF/Collection/... > /site1/append/install.conf > /site1/omit/X11R6/lib/X11/fonts/TTF/Collection/... > > Any advise in my methods or scheme in general would be appreciated! > > All the best, > > Kei

Re: Is 6.1 expected to happen soon?

2016-11-03 Thread Aaron Mason
ent is > progressing. > > -- > Peter N. M. Hansteen, member of the first RFC 1149 implementation team > http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/ > "Remember to set the evil bit on all malicious network traffic" > delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds. > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Segmentation fault of X under 6.0

2016-10-25 Thread Aaron Mason
e cause? At first I'd say consequence, but considering the fact that everything appears to have happened all at once... without knowing more about X, I couldn't say with any degree of confidence. > > Any suggestions? > > Thanks. > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: What are the security features in OpenBSD 6.0 that are by default disabled?

2016-10-16 Thread Aaron Mason
y truly secure system is one that is powered off, cast in a >> block of concrete and sealed in a lead-lined room with armed guards - >> and even then I have my doubts. " >> > > It needs to be stored under a filing cabinet in a disused lavatory with > a sign on the door saying B

Re: New OpenSSL double-free and invalid free vulnerabilities in X509 parsing

2016-10-13 Thread Aaron Mason
> could result in double free or leaks if a malloc failure > occurred. > Simplify and fix the logic. > Thanks to Guido Vranken for reporting this issue. > Reviewed-by: Matt Caswell <m...@openssl.org> > (Merged from #1691) > > Thanks! > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: Fwd: Booting BSD on a Libreboot system - documentation needed

2016-10-05 Thread Aaron Mason
z1M6a3A1EGRtwwcaWW5bRQRR9HaESq9YkVkSMrPZh6LgElpp8ei > l7FWuT6UG1Uq3N1zXfRCusSginE8UazKr0Q+V0XduNquVs3hqvA4Qv+7YfDVk18= > =9M7A > -END PGP SIGNATURE- > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

Re: umb is cool

2016-10-05 Thread Aaron Mason
a WWAN > card for your OpenBSD box and you have a BIOS that doesn't get in the way of > using the hardware of your choice, you might want to consider the list of > devices on the umb man page. > -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse

  1   2   3   >