Re: reach a remote LAN through IPSEC from the router

for the remote network to use the external interface of the > remote router as the gateway, or point to the internal carp interface. > There seems to be something funny about the way flows interact with the > routing table at times, and its not quite clear to me why. > > > On Mo

Re: reach a remote LAN through IPSEC from the router

31 PM, Christoph Leser a écrit : For me it works if I do the 'interface selection' myself, by specifying the -I switch on ping, or -b for ssh. -Ursprüngliche Nachricht- Von: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] Im Auftrag von Aurelien Martin Gesendet: Montag, 10.

Re: reach a remote LAN through IPSEC from the router

trick is to add a manual route for the remote LAN to the internal interface of your router. -Original Message- From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of Aurelien Martin Sent: Monday, February 10, 2014 3:59 PM To: misc@openbsd.org Subject: reach a remot

reach a remote LAN through IPSEC from the router

Dear all, I'm linked to another LAN trough IPSEC. Everything is working except, if I try to reach the remote LAN from my OpenBSD router. In this case, the router use the default interface (wan) instead of the IPSEC tunneling. I would like to be able to reach the remote LAN due to a service on

Re: alix2d3 "entry point at 0x200120" after PXE installation

Hi all, I succeed to boot the alix2d3 by fixing the MBR with "fdisk -u wd0" Cheers, Aurelien

Re: alix2d3 "entry point at 0x200120" after PXE installation

64:15647246 ] OpenBSD After the reboot - boot> booting hd0a:/bsd: 8824220+1096236=0x97613c entry point at 0x200120 [then reboot in loop] - I also try with wd0a boot> boot wd0a:/bsd booting wd0a:/bsd: 8824220+1096236=0x97613c entry point at 0x200120 [then

Re: alix2d3 "entry point at 0x200120" after PXE installation

teps to achieve it through PXE. As mentioned if it doesn't work I'll put directly OBSD 5.4 on the flash. Have a good day Aurelien 2013/11/30 Eike Lantzsch > On Friday 29 November 2013 17:12:45 Erling Westenvik wrote: > > On Fri, Nov 29, 2013 at 01:10:24PM +0100, Aurelie

alix2d3 "entry point at 0x200120" after PXE installation

Hi all, I installed openbsd-54 on a flash card on my alix2d3 board through PXE with a nullmodem cable. But after the installation, the machine reboot in loop after the message "entry point at 0x200120" I tried all the solution found in google, set the tty to com0, and also boot on wd0a instea