Re: snapshot boot fails with error "entry point at 0x1001000"

2020-10-28 Thread Fabian
Hi all, For the record, Mark Kettenis' patch below fixed the boot stuck problem on my Intel NUC Kit NUC7PJYH mini server, see the following email thread: https://marc.info/?l=openbsd-misc=160391516603159 Thanks a lot for this. Cheers. Fabian > Hi Mark, > > on my Lenovo V130 the pa

Re: OpenBSD 6.8 release boot stuck on Intel NUC NUC7PJYH

2020-10-28 Thread Fabian
into the EFI partition, replacing the files that were installed during the upgrade to OpenBSD 6.8 release * Reboot That procedure worked fine for me and was reasonably straightforward. Cheers. Fabian [1] https://marc.info/?l=openbsd-misc=160380332006125 [2] https://marc.info/?l=openbsd-misc

OpenBSD 6.8 release boot stuck on Intel NUC NUC7PJYH

2020-10-27 Thread Fabian
hes posted by Kastus Shchuka and Marc Kettenis, but I haven't had time to build a custom release yet to test them. I want to avoid rolling back to version 6.7 and figure out what the problem is. What else can I try? Cheers. Fabian OpenBSD 6.7 (GENERIC.MP) #2: Thu Jun 4 09:55:08 MDT 2020 r...@syspatc

Re: Privoxy crashes on one OpenBSD machine but not another

2020-06-09 Thread Fabian Keil
Sebastien Marie wrote: > A fix has been commited. Great. After applying 009_asr Privoxy's regression tests indeed run without errors. > Thanks for investigated the problem and provided a test case. It was very > useful to properly found the state corruption. You're welcome. Fabian

Re: Privoxy crashes on one OpenBSD machine but not another

2020-06-03 Thread Fabian Keil
".example.org") at resolve.c:18 #9 0x031ab56970d1 in _rthread_start (v=) at /usr/src/lib/librthread/rthread.c:96 #10 0x031a0264cdb8 in __tfork_thread () at /usr/src/lib/libc/arch/amd64/sys/tfork_thread.S:77 #11 0x in ?? () Fabian

Stuck on remote rsync with BackupPC and openrsync

2020-02-01 Thread Fabian
went wrong initially). Any suggestions what might go wrong or how to debug this further? Fabian

Does rkpcie(4) on RockPro64 supports PCI-E To Dual SATA-II Interface Card?

2019-03-30 Thread Fabian Raetz
in the dmesg: rkpcie0 at mainbus0 rkpcie0: link training timeout Full dmesg is attached. Thanks, Fabian [0] https://www.pine64.org/?product=rockpro64-pci-e-to-dual-sata-ii-interface-card [1[ https://github.com/jasperla/openbsd-rockpro64 In channel 0 CS = 0 MR0=0x98 MR4=0x3 MR5=0xFF MR8=0x8

pf: anchor not honoring quick

2018-09-29 Thread Fabian Mueller-Knapp
wever, all packets are dropped. Do i misread the manpage somehow? Regards, Fabian

Re: vim+YouCompleteMe: basic .ycm_extra_conf.py for /usr/src and bsd.*.mk Makefiles

2015-01-13 Thread Fabian Raetz
On Tue, Jan 13, 2015 at 10:33:56PM +0100, Fabian Raetz wrote: Hi, i've been using vim + YouCompleteMe [0] for some time know and it works pretty well with OpenBSD's src tree. I want to share my .ycm_extra_conf.py ([1] and below) with you. Maybe someone will find it usefull

vim+YouCompleteMe: basic .ycm_extra_conf.py for /usr/src and bsd.*.mk Makefiles

2015-01-13 Thread Fabian Raetz
flags are in CFLAGS / CPPFLAGS. If someone knows a better solution to read variables from Makefiles, let me know! :) Cheers, Fabian [0] - https://github.com/Valloric/YouCompleteMe [1] - https://gist.github.com/Mischi/b8d57f8732b27239469a .ycm_extra_conf.py

X11/RANDR Screen Change Notification doesn't work?

2014-10-04 Thread Fabian Raetz
. Does somebody of you know why this is not working on OpenBSD? Regards, Fabian Makefile PROG = monplugd NOMAN = NOMAN LDADD +=-L/usr/X11R6/lib LDADD +=-lxcb -lxcb-util -lxcb-randr CFLAGS += -I/usr/X11R6/include

Re: ifconfig scan while connected

2014-09-07 Thread Fabian Raetz
in the process of backporting a patch from FreeBSD, which seems to fix the problem. Running here with this patch for an hour or so and can scan with iwn running and it continues to work. I'll probably send a patch to tech@ next week. Regards, Fabian I'd like to be able to see other networks while

Re: Routing tables and pf rules with using 2 DHCP WAN interfaces ...

2014-08-04 Thread Fabian Raetz
On Mon, Aug 04, 2014 at 08:39:10PM +0200, Christophe wrote: Hi misc@, I was wondering about the behavior of OpenBSD in this case (not a production case at this time). 2 WAN interfaces (Ethernet / IPv4 DHCP) , linked to an OpenBSD box and 1 LAN interface (Ethernet / IPv4 static address)

Automatically start cwm

2014-07-17 Thread Fabian Bakkum
Dear OpenBSD fellows, I'm looking at using OpenBSD for digital signage, therefore I need to automatically start a X session with cwm. The problem is, is that xdm does not support automatic logins, which I understand, because it is a security concern for regular desktop setups. Although for this,

Re: ksh: expr 2147483648 / 2 = -1073741824 expected behavior or bug?

2014-02-25 Thread Fabian Raetz
On Tue, Feb 25, 2014 at 02:00:49AM +0100, Ingo Schwarze wrote: Hi Fabian, Fabian Raetz wrote on Mon, Feb 24, 2014 at 10:59:34PM +0100: while calculating my phys. memory (mb) with the folllowing shellsript i get as a result -424. sysctl -n hw.physmem returns 3849830400

ksh: expr 2147483648 / 2 = -1073741824 expected behavior or bug?

2014-02-24 Thread Fabian Raetz
tried expr 2147483647 / 2 which returns 1073741824 while expr 2147483648 / 2 returns -1073741824 ksh(1) states that expr does Integer arithmetic. So is this the expected behaviour or a bug? Regards, Fabian Raetz

Re: SIL-3512 supported?

2012-06-17 Thread Fabian
are described there in detail. It is pretty straightforward. I am using the latest non-RAID BIOS. Fabian On Sat, Jun 16, 2012 at 03:06:19PM +0200, LEVAI Daniel wrote: Can you tell me what steps are involved in doing that? Do you need a proprietary software for it, or is it doable from its

Re: SIL-3512 supported?

2012-06-16 Thread Fabian
Hello, I am using one of these add-in cards (PCI, 2 channel SATA) for the exact same purpose you mentioned. I had some problems in the beginning, but after I upgraded the firmware to the latest non-RAID version, it is working fine here. Fabian pciide1 at pci0 dev 18 function 0 CMD Technology

OpenBGP compare prefix from other peer

2010-05-14 Thread leonardo fabian
Hi all, i have following configuration: Upstream A [RA] [RC] [RB] --- Upstream B EBGP: RA - Upstream A RB - Upstream B Upstream A has 100% full internet routing table Upstream B has 70% internet routing table. on RA and RB: fib-update no and have default route to their

bgpctl reload, refuse to load configuration

2010-01-28 Thread leonardo fabian
Hi misc, After fixing error in bgpd.conf (OpenBSD 4.6), bgpctl reload, refuse to load new configuration. from /var/log/messages: Jan 27 06:55:43 acbgp bgpd[31029]: /etc/bgpd.conf:114: rib Adj-RIB-In allready exists. Jan 27 06:55:43 acbgp bgpd[31029]: /etc/bgpd.conf:114: rib Loc-RIB allready

tcp window scale in ISP

2010-01-21 Thread leonardo fabian
Hi all, As an internet service provider, we have bgp peering with customers. they also have bgp peering with other isp. the problem is if they use tcp window scaling and have different path for incoming and outgoing connection. they only use our connection for incoming traffic. how do pf handle

New ral(4) RT2860 Draft-N wireless PCI card

2008-08-08 Thread Fabian
: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (2T3R) This is on OpenBSD 4.4-beta i386 snapshot from July 31, see dmesg at the end. [1] http://longshine.de/longshine/p_wireless.php?lang=eng Here's a diff for the man page. Fabian Index: src/share/man/man4/ral.4

Re: Squid - Privoxy - Tor

2008-06-17 Thread Fabian Keil
Quote: SocketListenAddress 127.0.0.1 That's not a valid option. You probably meant SocksListenAddress. Fabian

Re: P2V with VMWare - ERR M

2008-02-28 Thread Fabian Heusser
] [mailto:[EMAIL PROTECTED] On Behalf Of Fabian Heusser Sent: 27. febrzar 2008 17:47 To: Zlfar M. E. Johnson Subject: Re: P2V with VMWare - ERR M Sorry, I refered to the second example in installboot(8) : http://www.openbsd.org/cgi-bin/man.cgi?query=installbootapropos=0sektion=0; manpath

Re: P2V with VMWare - ERR M

2008-02-27 Thread Fabian Heusser
/legal/disclaimer.txt -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Fabian Heusser Sent: 26. febrzar 2008 23:48 To: misc@openbsd.org Subject: Re: P2V with VMWare - ERR M Nick, thank you for taking the time to answer my questions. As you

Re: P2V with VMWare - ERR M

2008-02-26 Thread Fabian Heusser
was confusing me was that fdisk /dev/sd0c returns the same as the proper fdisk /dev/sd0 which mixed up my idea of the things. Fabian Fabian Heusser wrote: Hello I have an old box (3.6) which makes a lot of noise, so i like to virtualize it. I made an Image with acronis and converted it with vmware

P2V with VMWare - ERR M

2008-02-25 Thread Fabian Heusser
-- but the error persists. Does anyone have an idea what i'm doing wrong? Other Openbsd machines which i installed from scratch to a virtual machine are running fine. Thank You Fabian Infos: 00 Virtual machine running in VMWare Server 2 Beta Ubuntu 7.10 as Host New Box

Re: Squid 2.6 transparent proxy with pf

2006-12-21 Thread Fabian Keil
. Privoxy 3.0.7 (unreleased, only available trough CVS) does this and you could still use Squid as caching proxy, but Privoxy's intercepting mode is rather new and you would probably be the second tester ... Fabian -- http://www.fabiankeil.de/

Re: Squid 2.6 transparent proxy with pf

2006-12-21 Thread Fabian Keil
Fabian Keil [EMAIL PROTECTED] wrote: Dominik Zalewski [EMAIL PROTECTED] wrote: On Thursday 21 December 2006 15:04, Peter N. M. Hansteen wrote: Dominik Zalewski [EMAIL PROTECTED] writes: I have OpenBSD 4.0 firewall and I would like to redirect all outgoing http requests to my squid

Can't make 3.7-stable release (tries to exceed capacity of /dev/svnd0a?)

2005-07-11 Thread Adam Fabian
on /mnt: file system full -- Adam Fabian [EMAIL PROTECTED]

Re: Can't make 3.7-stable release (tries to exceed capacity of /dev/svnd0a?)

2005-07-11 Thread Adam Fabian
On Mon, Jul 11, 2005 at 11:48:49AM -0500, Chris wrote: On Mon, 11 Jul 2005, Adam Fabian wrote: I've tried building an OpenBSD release from the 3.7-stable branch a Ummm - maybe I don't understand but, how can you make a RELEASE from STABLE? Isnt STABLE following the patch branch

Re: Can't make 3.7-stable release (tries to exceed capacity of /dev/svnd0a?)

2005-07-11 Thread Adam Fabian
thread. ::blushes.:: I suppose I should've found that. Thanks for the help, though! -- Adam Fabian [EMAIL PROTECTED]

Re: make release - bfd/mybfd.h - no such file

2005-07-09 Thread Adam Fabian
a little. And why I have seen, I haven't been the unique one. The bottom of section 5.4 expressly states that it is not the definitive reference for release building, but release(8) is. In all cases, the manual pages are authoritative and all other documentation is supplementary. -- Adam Fabian

Possible to completely/reliably backup/dump a live filesystem?

2005-07-08 Thread Adam Fabian
have to go single-user to make absolutely sure that the library is updated on disk? -- Adam Fabian [EMAIL PROTECTED]

Re: Building READMEs

2005-07-05 Thread Adam Fabian
problem. You could do it all in the virtual machine, tar them up, and drop them in place on the 188 MHz machine if you need to avoid running the HD so much. -- Adam Fabian [EMAIL PROTECTED]

Re: Hidden restore space on laptop drives

2005-07-04 Thread Adam Fabian
(necessarily split into 2 GB pieces on a FAT filesystem) to restore the dsik. Intelligent guesswork + disk powertools that do what you tell them to do and don't ask questions. You should probably image the *whole* disk before you do anything. -- Adam Fabian [EMAIL PROTECTED]

Re: Is it possible to run named not in chroot?

2005-06-29 Thread Adam Fabian
, or chrooting into /export, I believe it's pretty easy to compile BIND from the distributor's sources on OpenBSD. -- Adam Fabian [EMAIL PROTECTED]

Re: Is it possible to run named not in chroot?

2005-06-28 Thread Adam Fabian
information out there in manual pages, but not this bit of this man page. -- Adam Fabian [EMAIL PROTECTED]