Re: Keyboard won't work during OpenBSD 7.1 or 7.2 installation.

if you plug in a USB keyboard at that point it will probably be recognised so that you can use it for the install. hth Fred On Tue, 22 Nov 2022 at 06:19, Clint wrote: > > Dear Sirs, > > > > My name is Clint Wu, I had been told the DMP’s EBOX-336x mini PC (pro

Re: video shows green box on -current

sysctl kern.video.record=1 There is now more security, same as audio. Cheers Fred On Tue, 16 Mar 2021 at 23:07, Pau wrote: > > Hi, > > this is > > -current 6.9 GENERIC.MP#410 amd64 > > on a thinkpad x270 (dmesg bottom) > > Up to a few weeks ago I was using

Re: What determines source IP of traffic from OpenBSD box ?

an interface you would need to create a route that used the specified interface. Hth Fred > On 26 Feb 2021, at 10:53, Rachel Roch wrote: > > Hi > > Let's say I'm running "pkg_add -u" on a OpenBSD-based router with multiple > interfaces. > > What determ

Re: Black screen when starting Xorg with Dell XPS 13 9350

/ external monitor. hth Fred On Sat, 2 Mar 2019 at 23:13, Bryan Avery wrote: > > I have been unable to start X with a new install of OpenBSD on my > laptop. I am a beginner with OpenBSD. This is a Skylake laptop with > Intel 520 QHD graphics. During boot, the console shows wi

Re: french amd64 snapshot packages mirrors not synced

Antoine Jacoutot @ 17-02-2019 10:11 CET: Thanks, syncing should resume soon. This was due to a stuck job that filled the disk. Thank you very much. Cheers. -fredg

french amd64 snapshot packages mirrors not synced

Hi, In case nobody noticed, french mirrors are stucked on January, the 31. http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/ http://ftp2.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/ While many have synced a couple of times since. Last one is on February, the 15 :

Re: Need an advice: Raspberry Pi3 B+ or Pine64 ROCK64

Hi hola, The raspi is fiddly for installing openbsd. One needs a special usb cable to install obsd because there is no driver for the sdcard booting device! Regards Alfredo On 26 Aug 2018, 10:30 +0100, Carlos López , wrote: > Hi all, > > I am considering to buy an ARM based device to use it with

Re: FAQ: dmesg archive

It's archive is only available to the developers. But their is a publicly list at: http://dmesgd.nycbug.org/index.cgi On Tue, 26 Jun 2018, 13:59 Rupert Gallagher, wrote: > There seems to be a dm...@openbsd.org address where to post such stuff, > but I could not find its archive, nor I could

Re: virtual colocation? Amazon/cloud?

y security blanket... and I love it *so* much... Steve I like mythic beasts[1] - they have data centres in Cambridge and London - they are technically literate and both my OpenBSD VM are with them. Cheers Fred [1]https://www.mythic-beasts.com/

Re: OpenBSD logo on my private hompage. It is allowed?

profit from them. Our primary distributors make T-shirts. So enjoy them and let the world see them, if that is your wish. So yes you can, but they are still copyrighted works. Cheers Fred

Initial Coin Offerings Laws and Regulations

that one day may consider going public, please contact us or pass this information on to them. We believe in developing long term relationships. We thank you and look forward to hearing from you regarding how we can best help and work with you. We look forward to your reply. Sincerely, Fred Jansen

Re: acme-client new cert error

0600 pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x05: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 0 int 20 for native-PCI interrupt isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 lm1 at wbsio0 port 0x290/8: NCT6776F uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (766cf76462667bec.a) swap on wd0b dump on wd0b Hi, What does your httpd.conf say for acme-challenge? Cheers Fred

Re: NFS server down, again, and again, and again...

Combined with "script", which will log all information that is appearing on the screen to a file, you should be able to run "mountd -d" and capture all information to a file, as well as resuming the session to see what is going on interactively. Cheers, Steve W. tmux(1) is included in the base install of OpenBSD - it is a modern and better replacement for screen :~) Cheers Fred

Re: thank you for 6.3

Hi, I am running 6.3 on my diy PC as a desktop and it just works! Thanks from me to all openBSD developers... On 18 April 2018 19:15:02 Scott Bonds wrote: Under 6.2 my laptop would hang a few hours after waking from sleep, and it was my own damn fault for running an

Re: webcam in browser not seen

Fred

video (1) Unable to use webcam

coding port:fred ~> video -e yuy2 -f /dev/video0 video: Xv adaptor 0 can't display yuy2 Thanks Fred dmesg: OpenBSD 6.3 (GENERIC.MP) #68: Fri Mar 16 01:24:47 MDT 2018 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 17037066240 (16247MB) avail mem = 165136629

Re: xlock Does Not Unlock (Snapshot)

: Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 +hsync -vsync (66.7 kHz eP) [29.916] (II) modeset(0): EDID vendor "LGD", prod id 1133 [29.916] (II) modeset(0): Printing DDC gathered Modelines: [29.916] (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 +hsync -vsync (66.7 kHz eP) [30.165] (II) modeset(0): EDID vendor "LGD", prod id 1133 [30.165] (II) modeset(0): Printing DDC gathered Modelines: [30.165] (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 +hsync -vsync (66.7 kHz eP) [73.351] (II) AIGLX: Suspending AIGLX clients for VT switch [88.935] (II) AIGLX: Resuming AIGLX clients after VT switch [88.956] (II) modeset(0): EDID vendor "LGD", prod id 1133 [88.956] (II) modeset(0): Printing DDC gathered Modelines: [88.956] (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 +hsync -vsync (66.7 kHz eP) [ 202.172] (II) AIGLX: Suspending AIGLX clients for VT switch [ 226.943] (II) AIGLX: Resuming AIGLX clients after VT switch [ 226.973] (II) modeset(0): EDID vendor "LGD", prod id 1133 [ 226.973] (II) modeset(0): Printing DDC gathered Modelines: [ 226.973] (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 +hsync -vsync (66.7 kHz eP) does ktrace -di xlock give any other clues - as nothing jumps out from Xorg.log. Cheers Fred

Re: httpd and wordpress

can do further to harden things just let me know :) advice is most apreciated Regards Running WPScan[1] against your WordPress installation can be useful to check that your WordPress install isn't too full of holes. Cheers Fred [1]https://github.com/wpscanteam/wpscan

Re: Etnernal & infernal browser woes

idium on a daily basis. Ciao! David I have to agree with David - here I used chrome on a daily basis with a minimum of two chrome windows with at least 4 tabs in each - and I do not see the issues you describe, my laptop is coming up for 4 years old, with some info from dmesg shown at [1]. C

Re: Strange PF behaviour after 6.0 -> 6.1 pgrade

DF) Apr 17 06:41:32.369399 rule 63/(match) block out on em3: 155.4.8.28.80 > 51.255.65.91.42819: R 0:0(0) ack 1 win 0 (DF) — cut the rest — What have I missed? Tnx in advance Peo Thanks Peo You might get some clues from: pfctl -sr -R 63 Cheers Fred

Re: strict separation base system and third party software

tp://man.openbsd.org/hier.7 http://man.openbsd.org/packages.7 and they can all be found on your system if you installed the manXX.tgz sets hth Fred [1] http://www.openbsd.org/goals.html

Re: OpenBSD Only BSD Install Image Booting on MS Surface Pro 3

post installation. David I've been running OpenBSD on a Surface Pro 3 for a while, see dmesg below. The Marvel wireless currently does not work so using a usb ethernet adapter for networking. Cheers Fred dmesg: OpenBSD 6.0-current (GENERIC.MP) #2559: Tue Oct 11 18:42:09 MDT 2016 dera

Fwd: Booting BSD on a Libreboot system - documentation needed

Hi misc@ The following message was sent to bugs@ but probably belongs here... Libreboot is no longer a GNU project and they are keen to better support OpenBSD and the *BSD's in general. Cheers Fred Forwarded Message Subject: Booting BSD on a Libreboot system

Re: Dual booting - can't boot OpenBSD from Windows 10 bootloader

. Or run it all on OpenBSD and run Windows and Linux in qemu from ports. Works for me ;~) Fred

Re: cuaU0 problems

ort 0 apic 2 int 19: ns16550a, 16 byte fifo com4: probed fifo depth: 0 bytes did you try cuaU3? hth Fred

Re: ksh, PS1 and PWD

On 08/04/16 00:25, Fred wrote: On 08/03/16 23:19, Uwe Werler wrote: Hello list, maybe this can be done better (~/.kshrc): _pwd(){ local _len="25" local _sym="/<.." [[ ${PWD} == ${HOME}* ]] && { PWD="~${PWD#${HOME}}"; _sym="~${_sym#/}&

Re: ksh, PS1 and PWD

len ]] && { typeset -R"$_len" local _pwd=$PWD; PWD="${_sym}/${_pwd#*/}"; } print $PWD } PS1='\h:$(_pwd)\\$ ' Any hints? Thanks in advance. are you looking for \w? as in: PS1="\h:\u \w> " hth Fred

NSA addition to ifconfig

BROADCAST,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:20:91:9d:48:06 index 2 priority 4 groups: wlan media: IEEE802.11 autoselect status: no network ieee80211: nwid "" The following patch updates ifconfig.c and ifconfig.8 to add the nsa option :~)

Re: Suggestion: new webpage for openbsd.org

he OpenBSD website has always been function over fashion - and accuracy over bling. The OpenBSD's prefered licence wording can be found at: http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/share/misc/license.template?rev=HEAD Contributions are prefered as diff's against OpenBSD's cvs. hth

Re: apache-httpd-openbsd?

It was removed 11 days ago: http://cvsweb.openbsd.org/cgi-bin/cvsweb/ports/www/apache-httpd-openbsd/Attic/Makefile You'll need a cvs version before 28 Apr 16 if you want to build it yourself. Cheers Fred

Re: Need help to install OpenBSD 5.9 macppc via pxe

oot bsd.rd change the behaviour? hth Fred

Re: Ruby 1.9.3 package on OpenBSD 5.9 (snapshots) missing

/1.9/Attic/ hth Fred

umodem Xadow GSM+BLE

, and for 2. in [2] below. Any hints greatly appreciated. Cheers Fred [1] When plugged in as mass storage mode it shows up as: Jan 23 11:05:22 port /bsd: umodem0 at uhub6 port 4 configuration 1 interface 1 "MediaTek Inc. product 0x0003" rev 1.10/1.00 addr 12 Jan 23 11:05:22 port /bs

Re: partitioning problem!!! exist 4.2BSD with NTFS/MSDOS partition on same volume.

for any other partitions as desired. I'm surprised you managed format the c partition - but that is your issue. hth Fred

Re: Hosting a virtual Windows instance

stdio -vnc :0 \ -no-fd-bootchk \ -hda xp.img \ -cdrom /dev/cd0a -boot d Although often just changing the user agent in my browser is sometimes sufficient for stupid sites. hth Fred

option DEBUG in sparc64 kernel

Fred

Re: em(4) watchdog timeouts

reason I see this reply but not the original post containing the actual patch. Thank you, Chris It's in the mailing list archives as well: http://marc.info/?l=openbsd-misc=144649704221735=2 hth Fred

Re: amd64-current (evening of Oct. 24th) make build failed

ave revision 1.64 of ndp.c? hth Fred

Re: It was twenty years ago you see...

OS! Cheers Fred

Re: Private cloud hosting recommendations

Hi, I'm happily running OpenBSD on: https://www.mythic-beasts.com/ they have excellent technical support. Cheers Fred

Re: ugen0 instead of urtwn0

_urtwn.c # # rebuild/install kernel -- Thuban Hi dmesg(8) and usbdevs(8) -v output would be useful. Cheers Fred

Re: ugen0 instead of urtwn0

ctober. hth Fred

Re: rc.shutdown powerdown

On 09/20/15 20:58, Quartz wrote: Powerdown went away in July 2014. The FAQ needs to be updated then: http://www.openbsd.org/faq/faq10.html "rc.shutdown /etc/rc.shutdown is a script that is run at shutdown. Anything you want done before the system shuts down should be added to this file. If

Re: rc.shutdown powerdown

On 09/20/15 21:44, Quartz wrote: On Sep 20 4:36 PM, Fred wrote: On 09/20/15 20:58, Quartz wrote: Powerdown went away in July 2014. The FAQ needs to be updated then: http://www.openbsd.org/faq/faq10.html "rc.shutdown /etc/rc.shutdown is a script that is run at shutdown. Anything you

Re: azalia audio works, then stutters until reboot

dstore.com you might get it before the 18 Oct! Cheers Fred

Re: open bsd 5.7 and 5.8 cd ordering questions

as a letter? Thank you. oh and in answer to question 2. the Royal Mail claim to deliver in 5-7 working days to the rest of the world, which includes the US. hth Fred

Re: open bsd 5.7 and 5.8 cd ordering questions

these protection methods can be subverted - but the signify key will then allow you to see if they have tampered with the product. Although the truly paranoid can check the signify key printed on their disks with the one on the OpenBSD website. hth Fred

Re: X error: Maximum number of clients reached

for this? Any ideas appreciated. Thanks!! Luke This might be login.conf / ulimit (man ksh) issue... Fred

Re: Random PID implementation and security

://www.openbsd.org/papers/dev-sw-hostile-env.html, see randomization section, backed by the philosophy section: The sooner we can break it, the sooner we can fix it). Having PID's that are not easily predicable helps to reduce the attack surface. IMO that is a security measure, but YMMV. Fred

Re: what happened to the encap address_family

On 05/15/15 21:13, Michał Koc wrote: Hello misc, anyone capable to answer ? Best regards MichaÅ‚ Koc -- Wiadomość oryginalna -- *Temat: *what happened to the encap address_family *Nadawca: *Boris Goldberg bo...@twopoint.com *Adresat: *misc@openbsd.org *Data: *2015-05-14 18:14 Hello

Re: C.H.I.P

is there a possibility OpenBSD might be made to run on this board? -Gene Buy some for the developers and it might become a reality. Cheers Fred

Re: [patch] designate main website pages as the canonical source

shouldn't matter. Fred

Re: cdce0 in ifconfig

: 0 Hardware: http://consumer.huawei.com/en/solutions/m2m-solutions/products/tech-specs/mu609-en.htm Regards, Cristian something like: ifconfig cdce0 inet 192.168.0.1 255.255.255.0 should do the trick. hth Fred

Re: cdce0 in ifconfig

dhcp does make much sense... What is on the other end of the link? Fred

Re: Cannot connect to CUPS web interface in -current

-2.0.2 CUPS libraries and headers cups-pk-helper-0.2.5 fine-grained privileges PolicyKit helper for CUPS gtk+3-cups-3.14.8 gtk+3 CUPS print backend Maybe ktrace cups to seem that can give any clues. hth Fred

Re: FW: ppp not found

website You are getting closer - but there is information missing to help solve the problem which is /dev/cuaU0 failing to be opened. What is the output of: ls -l /dev/cuaU* and: grep com /var/log/messages hth Fred

Re: ppp not found

to a chat script? Hi AY, This old post from mailing list might be of some use: http://marc.info/?l=openbsd-miscm=123638536119595 Cheers Fred

Re: Mapping pf syslog rule numbers to lines in pf.conf

pf.conf Could someone enlighten me? thanks, -Alan Also look at: -g Include output helpful for debugging. as in: pfctl -g -sr @1 are the rule numbers. hth Fred

Re: nginx question...

Fred

OpenBSD talk at ScotLUG, Glasgow

Hi misc@ If anyone is in Glasgow on Thursday evening - I'm giving a talk at the Scottish Linux User Group (http://scotlug.github.io/) on Building redundant and transparent firewalls with OpenBSD. See you there! Cheers Fred

Re: usb ehci errors in 5.6-stable

message repeated 4 times it errased my dmesg, so I can't provide it. [demime 1.01d removed an attachment of type application/pgp-signature] look in: /var/run/dmesg.boot Fred Thanks, here it is: OpenBSD 5.6-stable (GENERIC.MP) #0: Sun Jan 11 20:07:24 MSK 2015 root@t4.local.:/usr/src/sys

Re: usb ehci errors in 5.6-stable

, so I can't provide it. [demime 1.01d removed an attachment of type application/pgp-signature] look in: /var/run/dmesg.boot hth Fred

Re: FAQ: My mission is to make it up into /src/lib/libssl/...

by the OpenBSD project, or has the page been defaced? David Each release has a theme... That's why you order your CD sets: http://www.openbsd.org/orders.html Fred PS The stickers are awesome

Re: Failed cron jobs are silent

* * * * * logname; umask; pwd; printenv | sort - End forwarded message - set the MAILTO variable in crontab. hth Fred man 5 crontab not man 1 crontab :~)

Re: leaving linux - questions about capabilities

On 12/30/14 03:45, Jonathan Gray wrote: On Mon, Dec 29, 2014 at 08:57:15PM +, Fred wrote: I currently have three monitors connected to my laptop but if I try to enable X on the third one I'm getting the following error: port:fred ~ xrandr --output VGA1 --auto xrandr: cannot find crtc

Re: leaving linux - questions about capabilities

On 12/30/14 21:08, Christopher Barry wrote: /snipped I currently have three monitors connected to my laptop but if I try to enable X on the third one I'm getting the following error: port:fred ~ xrandr --output VGA1 --auto xrandr: cannot find crtc for output VGA1 Thanks Fred. what happens

Re: leaving linux - questions about capabilities

on the third one I'm getting the following error: port:fred ~ xrandr --output VGA1 --auto xrandr: cannot find crtc for output VGA1 But blender 2.72 is running fine (I wish I new how to use it properly). Output of xrandr and dmesg below if interested. hth Fred PS twitter pic of two monitors

Re: Getting the right image, to install via USB

for OpenBSD then you need to help yourself. hth Fred

Re: What happened when 5.5 met my old reliable box

!) ? I missed the class that taught that trick. 8-) at the boot prompt: boot stty com0 9600 boot set tty com0 Then use cu(1) to do the rest hth Fred

Re: OpenBSD 5.6 - amd64 on Lenovo G480

/ external monitor button (Fn+F5 on this machine) brings up X. hth Fred PS dmesg is always useful

Re: macppc install56.iso - CD issues

)?) be used instead of cdrecord(1) (from ports) to burn these images to disc? Thanks in advance, --patrick Hi, What happens when you hold the 'c' key during reboot? If you mount the disks under a working system is ofwboot in the / ? hth Fred

Re: macppc install56.iso - CD issues

On 12/09/14 19:07, patrick keshishian wrote: Hi Fred, On 12/9/14, Fred open...@crowsons.com wrote: On 12/09/14 08:10, patrick keshishian wrote: Hi, I must be doing something wrong here and need some hints to figure out what. My attempts to burn macppc install56.iso to a CD seems to produce

Re: macppc install56.iso - CD issues

On 12/09/14 20:51, patrick keshishian wrote: On 12/9/14, Fred open...@crowsons.com wrote: On 12/09/14 19:07, patrick keshishian wrote: On 12/9/14, Fred open...@crowsons.com wrote: What happens when you hold the 'c' key during reboot? I get gray screen with folder and flashing ?. I have

Re: using cua0 the easy way

On 11/20/14 21:47, sven falempin wrote: How an openBSD dev is reading the /dev/cua when the cua is a ksh shall on the other side ? stty is obscure to me, I may install minicom or screen but how do you do that ? cu(1)?

Re: Basic question about following current

the trick. hth Fred

OT: integrating git branch output into ksh PS1 shell prompt?

Git fans like to know what branch is current, and bash's implementation of PS1 allows for update each time it is displayed. All of my attempts of adding a call to a ksh function into PS1 appear to be evaluated at the time that PS1 is set, but not upon each new display of the shell prompt.

OpenBSD 5.6 Disks

Hi misc@ Just received my 5.6 disks in the post! Thanks to all the developers for your continued work in making another great OpenBSD release. Cheers Fred -- 5.6 in the wild: https://twitter.com/fcbsd/status/525618236667482112

Re: HEADS-UP: issues with chromium in -current

) ?? Compiled against Lua 5.2.3 (running with Lua 5.2) ?? D-Bus support: ? cheers Fred

Libretto 70CT

prompt. Last time I tried this I left it running for about a week - and still did not make it to a login prompt. hth Fred PS I've CC misc@ for the archives rather than clog up ports@ Script started on Thu Oct 23 21:10:34 2014 port:fred ~ cu -l /dev/cuaU0 Connected to /dev/cuaU0 (speed 9600

Re: Libretto 70CT

On 10/23/14 23:30, Mike Larkin wrote: On Thu, Oct 23, 2014 at 09:59:04PM +0100, Fred wrote: Hi Sebastian, I've just installed -current on my Libretto 70CT - as you can see from the output below it stoped with: kernel: integer divide fault trap, code=0 Rebooted it and disable it, schsio

Re: OpenBSD 5.6 pre-orders in Germany possible

On Tue, Sep 30, 2014 at 09:02:56PM +0200, Stefan Wollny wrote: Am 09/30/14 um 14:42 schrieb Martijn van Duren: On Sat, 2014-09-27 at 07:30 +0100, OpenBSD Europe wrote: Hi folks, I just noticed that in Germany Lehmanns (see OpenBSD's order-site) already accepts pre-orders for OpenBSD

Re: Can OpenBSD access BBC Iplayer?

flash is a positive feature for me ;~) I have not managed to get iplayer to work in a browser. If you succeed could you let misc@ know it would be useful for the archives. Cheers Fred

Re: Ethernet port on Lenovo G480

with run0 USB wireless adapter for the moment. Fred

Re: Vision 2020: Making OpenBSD the world's fastest OS

On 06/12/14 15:16, Stuart Henderson wrote: On 2014-06-11, Fred open...@crowsons.com wrote: On 06/11/14 15:16, Carsten Kunze wrote: - Original Nachricht Von: Rodrigo Mosconi open...@mosconi.mat.br An: Carsten Kunze carsten.ku...@arcor.de Datum: 11.06.2014 16:05 Betreff: Re

Re: Vision 2020: Making OpenBSD the world's fastest OS

On 06/11/14 15:16, Carsten Kunze wrote: - Original Nachricht Von: Rodrigo Mosconi open...@mosconi.mat.br An: Carsten Kunze carsten.ku...@arcor.de Datum: 11.06.2014 16:05 Betreff: Re: Vision 2020: Making OpenBSD the world's fastest OS What is the output from echo $?, after

Re: Vision 2020: Making OpenBSD the world's fastest OS

On 06/11/14 15:25, Fred wrote: On 06/11/14 15:16, Carsten Kunze wrote: - Original Nachricht Von: Rodrigo Mosconi open...@mosconi.mat.br An: Carsten Kunze carsten.ku...@arcor.de Datum: 11.06.2014 16:05 Betreff: Re: Vision 2020: Making OpenBSD the world's fastest OS What

Re: how to forward port 2222 of pf box to port 22 of internel webserver

-to \ $webserver port ssh and pass in on $wan_if proto tcp to ($wan_if) port flags S/SA synproxy state work for me on: OpenBSD atom.crowsons.com 5.4 GENERIC.MP#44 i386 If the above does not help run tcpdump on both interfaces and see what is / is not being passed... hth Fred

Re: Netgear WG311T Atheros Chipset Wireless Problem

On 03/26/14 07:03, Wong Peter wrote: Dear all, I had bought a Netgear WG311T Atheros Chipset. The Openbsd kernel(dmesg) shows this card as ath0. Therefore, I try to configure it using /etc/hostname.ath0 with content below: inet 192.168..5.1 255.255.255.0 none media autoselect mediaopt hostap

Re: In OpenBSD how to upgrade individual system files like (grep, rcs, rlog ) to latest version?

On 03/27/14 06:12, jignesh desai wrote: I am attempting to run foswiki on OpenBSD. Things are installed and i am able to open /bin/Configure page of foswiki configuration screen. but the page reports few errors, complaining that following files are either not found or outdated and new versions

Re: In OpenBSD how to upgrade individual system files like (grep, rcs, rlog ) to latest version?

On 03/27/14 10:41, jignesh desai wrote: Hi Fred, No I have modifided config and Unchrooted it. After which i am successfully able to run http://localhost/foswiki/bin/configure page. and its this page that reports error about wrong file versions. therefore i wish to update those files to latest

Re: Netgear WG311T Atheros Chipset Wireless Problem

On 03/27/14 12:23, Wong Peter wrote: Hi Fred, There is no output display to the console. It cannot become hostap. Please help. dmesg and output of /sbin/ifconfig ath0 would help debug this. cheers Fred

Re: BTW: 5.5-pre-orders

pre-orders for 5.5 :~) Thanks to all the devs for their great work on getting another release ready! Cheers Fred

Re: Where is this device attached?

On 03/20/14 16:33, John Long wrote: On Fri, Mar 21, 2014 at 03:08:31AM +1100, Jonathan Gray wrote: Thanks. How do I build this? /jl http://www.openbsd.org/faq/faq5.html should answer most of your questions. hth Fred

Re: link in faq leads to inexisting page

be fixed. The file was removed in some time after 2 July 2010 - but versions can be found on the Internet Achive: http://web.archive.org/web/20020507140135/http://www.pintday.org/whitepapers/ftp-review.shtml Fred

Re: ksh: expr 2147483648 / 2 = -1073741824 expected behavior or bug?

=`sysctl -n hw.physmem` phys_mem_mb=`expr $phys_mem_bytes / 1024 / 1024` echo $phys_mem_mb -- You declared #!/bin/sh so you are using the broune shell, not ksh - fyi. On OpenBSD sh is the same binary as ksh, the notes section of the sh(1) gives some more detail as does the faq[1]. Fred

Re: mounting CVS tree read-only?

On Friday, February 21, 2014 11:14 AM, Theo de Raadt dera...@cvs.openbsd.org wrote: After studying FAQ 5.3, I am contemplating mounting /usr/src and /usr/xenocara read-only through NFS so I can maintain a centralized tree for multiple platforms.  Is this possible?  Are all writes made to

Re: Xorg: Segmentation fault at address 0x28 w/ Intel HD Graphics 4600

an xorg.conf file to run X in most cases. ) I'll stop using X -configure. Other recommendations for getting better resolution? xrandr(1) and mode lines from cvt(1) or gtf(1) might give you better resolution. cvt has solved resolution issues for me where gtf failed. hth Fred PS in theory you

Re: PHP SIGSEGV with Mediawiki

the crash. I need information on how to get more details from the system. kdump(1) might help you solve this issue. hth Fred

Re: PHP SIGSEGV with Mediawiki

On 02/10/14 16:36, Fred wrote: On 02/10/14 14:47, Cyrus wrote: I never got a reply to this. I am still having issues with PHP crashing, in fact it seems to be happening for every new user. Old sites are working fine. I don't know why this is happening, as before there is very little information

Re: Does OpenBSD's wpa_supplicant support PSK?

. If a passphrase is used the nwid option must be set prior to specifying the wpakey option, since ifconfig will hash the nwid along with the passphrase to create the key. Fred

  1   2   3   4   >