pf and or sis crash
This problem only seem to happen where there is alot of active connections and more than 2Mbit/s going thrue this little soekris... Im not sure how to fix this, so any help appreciated! OpenBSD 4.8-current (GENERIC) #355: Wed Sep 8 17:33:10 MDT 2010 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX real mem = 133787648 (127MB) avail mem = 121700352 (116MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 20/80/03, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf/0x1 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0: (uniprocessor) cpu0: TSC disabled pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00 sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c6:12:e8 nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c6:12:e9 nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c6:12:ea nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 ral0 at pci0 dev 14 function 0 Ralink RT2561 rev 0x00: irq 11, address 00:08:a1:9c:32:f9 ral0: MAC/BBP RT2661B, RF RT2527 gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00 gpio0 at gscpcib0: 64 pins NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 1: SanDisk SDCFH2-008G wd0: 4-sector PIO, LBA, 7815MB, 16007040 sectors wd0(pciide0:0:1): using PIO mode 4, DMA mode 2 geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0 ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 5, version 1.0, legacy support isa0 at gscpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS gpio1 at nsclpcsio0: 29 pins gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 Compaq OHCI root hub rev 1.00/1.00 addr 1 biomask f3e5 netmask ffe5 ttymask uhub1 at uhub0 port 1 Genesys Logic USB2.0 Hub rev 2.00/9.01 addr 2 uftdi0 at uhub1 port 3 Telldus TellStick rev 2.00/6.00 addr 3 ucom0 at uftdi0 portno 1 ugen0 at uhub1 port 4 Hewlett-Packard HP LaserJet 1020 rev 2.00/1.00 addr 4 softraid0 at root root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted pf: state key linking mismatch! dir=OUT, if=sis0, stored af=2, a0: 83.252.222.171:55062, a1: 10.10.10.111:38309, proto=17, found af=2, a0: 187.170.255.239:65519, a1: 187.170.255.239:48042, proto=17 pf: state key linking mismatch! dir=OUT, if=sis0, stored af=2, a0: 94.112.19.65:50001, a1: 10.10.10.207:39068, proto=17, found af=2, a0: 187.170.255.239:65519, a1: 187.170.255.239:48042, proto=17 uvm_fault(0xd0a08280, 0x1900e000, 0, 3) - e kernel: page fault trap, code=0 Stopped at pool_do_get+0x145: movl%eax,0x8(%edx) PS: PID PPID PGRPUID S FLAGS WAIT COMMAND 2903 1 2903 0 3 0x4080 ttyin getty 16063 1 16063 0 30x80 selectcron 27543 3454 3454 0 3 0x4080 kqreadtail 3454 1 3454 0 30x80 piperdperl 26634 1455 0 30x80 nanosleep perl 22063 15708 15708 0 3 0x180 selectsmbd 15708 1 15708 0 3 0x180 selectsmbd 22468 1 22468 0 30x80 selectminiupnpd 17792 30426 30426 67 3 0x180 netconhttpd 32576 30426 30426 67 3 0x180 netconhttpd 26016 30426 30426 67 3 0x180 netconhttpd 5024 1 5024 0 3 0x180 selectinetd 30426 1 30426 67 3 0x180 selecthttpd 15973 16859 16859 95 3 0x180 kqreadsmtpd 27354 16859 16859 95 3 0x180 kqreadsmtpd 10819 16859 16859 95 3 0x180 kqreadsmtpd 2265 16859 16859 95 3 0x180 kqreadsmtpd 14262 16859 16859 95 3 0x180 kqreadsmtpd 25632 16859 16859 95 3 0x180 kqreadsmtpd 29244 16859 16859 95 3
Re: New port: sysutils/dtpstree
On Sat, Aug 14, 2010 at 10:38, Douglas Thrift douglas...@gmail.com wrote: On 7/25/2010 11:03 PM, Douglas Thrift wrote: Hello, I would appreciate any comments on my port. Thanks! works on aug 11 amd64 snapshot /Henrik
Re: hp6930p insane acpitz1 and non working keyboard after halt -p
I donated when Marco asked for cash to hp laptops , not much, but something... Anyway, I can live with the problem, since suspend/resume works well :) On Fri, Aug 13, 2010 at 16:35, Theo de Raadt dera...@cvs.openbsd.org wrote: My HP 6939p behaves a bit strange, I asked for donation HP machines a few times, for myself and a few other ACPI developers. Only one person replied and it is going to take a few weeks to get the machine to me. So we can't help you. Good luck fixing your own bug, all of you HP owners.
kernel crash amd64 hp elitbook 6930p
I get pass this crash if I disable acpi... dmesg and partial (due to segmentation fault) acpidump follows. acpidump -o output at http://anka.org/acpidump/ OpenBSD 4.4-current (GENERIC.MP) #2000: Tue Dec 2 22:35:51 MST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2060275712 (1964MB) avail mem = 2000232448 (1907MB) RTC BIOS diagnostic error feclock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x7bbc4000 (21 entries) bios0: vendor Hewlett-Packard version 68PCU Ver. F.0C date 10/17/2008 bios0: Hewlett-Packard HP EliteBook 6930p acpi0 at bios0: rev 0 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SLIC DMAR SSDT SSDT SSDT acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5) RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.54 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 3MB 64b/line 8-way L2 cache cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 3MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 1 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus -1 (PEGP) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus 2 (RP02) acpiprt3 at acpi0: bus 3 (RP03) acpiprt4 at acpi0: bus 68 (RP05) acpiprt5 at acpi0: bus 133 (PCIB) acpiprt6 at acpi0: bus 0 (PCI0) acpiec0 at acpi0 acpicpu0 at acpi0: C2, C1, PSS acpicpu1 at acpi0: C2, C1, PSS acpitz0 at acpi0: critical temperature 105 degC acpitz1 at acpi0: critical temperature 112 degC acpitz2 at acpi0: critical temperature 112 degC acpitz3 at acpi0: critical temperature 90 degC acpitz4 at acpi0: critical temperature 95 degC acpibat0 at acpi0: BAT0 model Primary serial 02583 2008/09/18 type LIon oem Hewlett-Packard acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: LID_ acpivideo at acpi0 not configured cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel GM45 Host rev 0x07 vga1 at pci0 dev 2 function 0 Intel GM45 Video rev 0x07 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp at vga1 not configured inteldrm0 at vga1 drm0 at inteldrm0: couldn't find agp Intel GM45 Video rev 0x07 at pci0 dev 2 function 1 not configured Intel ICH9 IGP M AMT rev 0x03 at pci0 dev 25 function 0 not configured uhci0 at pci0 dev 26 function 0 Intel 82801I USB rev 0x03: apic 1 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 Intel 82801I USB rev 0x03: apic 1 int 17 (irq 10) uhci2 at pci0 dev 26 function 2 Intel 82801I USB rev 0x03: apic 1 int 18 (irq 10) ehci0 at pci0 dev 26 function 7 Intel 82801I USB rev 0x03: apic 1 int 19 (irq 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 82801I HD Audio rev 0x03: apic 1 int 17 (irq 10) azalia0: RIRB time out azalia0: codecs: Analog Devices/0x194a, ATT/Lucent/0x1040, using Analog Devices/0x194a audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x03: apic 1 int 16 (irq 10) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 Intel 82801I PCIE rev 0x03: apic 1 int 17 (irq 10) pci2 at ppb1 bus 2 iwn0 at pci2 dev 0 function 0 Intel WiFi Link 5300AGN rev 0x00: apic 1 int 17 (irq 10), MIMO 3T3R, MoW, address 00:16:ea:70:8 ppb2 at pci0 dev 28 function 2 Intel 82801I PCIE rev 0x03: apic 1 int 18 (irq 10) pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x03: apic 1 int 16 (irq 10) pci4 at ppb3 bus 68 uhci3 at pci0 dev 29 function 0 Intel 82801I USB rev 0x03: apic 1 int 20 (irq 10) uhci4 at pci0 dev 29 function 1 Intel 82801I USB rev 0x03: apic 1 int 22 (irq 11) uhci5 at pci0 dev 29 function 2 Intel 82801I USB rev 0x03: apic 1 int 18 (irq 10) ehci1 at pci0 dev 29 function 7 Intel 82801I USB rev 0x03: apic 1 int 20 (irq 10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0x93 pci5 at ppb4 bus 133 Ricoh 5C832 Firewire rev 0x06 at pci5 dev 9 function 0 not configured sdhc0 at pci5 dev 9 function 1 Ricoh 5C822
azalia problem on hp-2133 VIA HD Audio
It attaches, but there is no sound, I have tried to change some values with mixerctl and audioctl but without any success. Just compiled with AZALIA_DEBUG, dmesg at end. Any help in getting this working is appreciated. $ mixerctl -av inputs.dac2=126,126 inputs.dac3=126,126 inputs.mix.sel6.mute=off [ off on ] inputs.mix.sel5.mute=off [ off on ] inputs.mix2.dac3.mute=off [ off on ] inputs.mix2.sel5.mute=off [ off on ] inputs.mix3.sel4.mute=off [ off on ] inputs.mix3.sel5.mute=off [ off on ] inputs.sel.source=mic [ mic mic2 speaker mix6 sel8 mic3 ] outputs.sel.mute=on [ off on ] outputs.sel=124,124 inputs.sel2.source=mic [ mic mic2 speaker mix6 sel8 mic3 ] outputs.sel2.mute=off [ off on ] outputs.sel2=124,124 inputs.sel3.source=dac2 [ dac2 dac3 ] inputs.sel4.source=dac2 [ dac2 dac3 ] inputs.beep.mute=off [ off on ] inputs.beep=119 outputs.headphones.mute=off [ off on ] outputs.headphones.boos=off [ off on ] outputs.line.mute=off [ off on ] outputs.line.boost=off [ off on ] outputs.line.eapd=off [ off on ] outputs.cd.mute=off [ off on ] outputs.cd=120 outputs.cd.eapd=off [ off on ] inputs.mic=85,85 inputs.mic2=85,85 outputs.speaker.mute=off [ off on ] outputs.speaker.dir=output [ input output ] outputs.speaker.eapd=off [ off on ] inputs.mic3=85,85 outputs.pow.source=mix6 [ mix6 sel5 ] outputs.digital-out.mut=off [ off on ] outputs.digital-out=126,126 outputs.line2.mute=off [ off on ] outputs.line2.dir=output [ input output ] outputs.vendor4.source=mix [ mix mix2 headphones pow other line2 mix4 ] inputs.mix4.sel3.mute=off [ off on ] inputs.mix4.sel5.mute=off [ off on ] inputs.mix6.mic.mute=off [ off on ] inputs.mix6.mic2.mute=off [ off on ] inputs.mix6.speaker.mu=off [ off on ] inputs.mix6.other.mute=off [ off on ] inputs.mix6.sel8.mute=off [ off on ] inputs.mix6.dac2.mute=off [ off on ] inputs.mix6.dac3.mute=off [ off on ] inputs.mix6.mic=120,120 inputs.mix6.mic2=120,120 inputs.mix6.speaker=120,120 inputs.mix6.other=120 inputs.mix6.sel8=120,120 inputs.mix6.dac2=120,120 inputs.mix6.dac3=120,120 outputs.sel5.mute=off [ off on ] outputs.sel5=120,120 inputs.sel6.source=dac2 [ dac2 dac3 ] inputs.sel7.source=dac2 [ dac2 dac3 ] inputs.mix7.sel7.mute=off [ off on ] inputs.mix7.sel5.mute=off [ off on ] outputs.sel8=85,85 outputs.vendor5.source=mic [ mic mic2 line2 ] outputs.vendor6.source=adc [ adc adc2 ] outputs.vendor7.source=adc [ adc adc2 ] inputs.vendor7.mute=off [ off on ] outputs.vendor8.source=adc [ adc adc2 ] inputs.vendor8.mute=off [ off on ] outputs.vendor9.source=hdaudio [ hdaudio vendor6 ] inputs.usingdac=03 [ 03 02 04 ] record.usingadc=08 [ 08 09 ] $ audioctl -a name=HD-Audio version=1.0 config=azalia0 encodings=slinear_le:16,slinear_le:16 properties=full_duplex,independent full_duplex=0 fullduplex=0 blocksize=9600 hiwat=6 lowat=4 output_muted=0 monitor_gain=0 mode= play.rate=48000 play.channels=2 play.precision=16 play.encoding=slinear_le play.gain=127 play.balance=32 play.port=0x0 play.avail_ports=0x0 play.seek=0 play.samples=0 play.eof=0 play.pause=0 play.error=0 play.waiting=0 play.open=0 play.active=0 play.buffer_size=65536 play.block_size=9600 play.errors=0 record.rate=48000 record.channels=2 record.precision=16 record.encoding=slinear_le record.gain=127 record.balance=32 record.port=0x0 record.avail_ports=0x0 record.seek=0 record.samples=0 record.eof=0 record.pause=0 record.error=0 record.waiting=0 record.open=0 record.active=0 record.buffer_size=65536 record.block_size=9600 record.errors=0 $ mpg123 test.mp3 High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2 and 3. Version 0.59r (1999/Jun/15). Written and copyrights by Michael Hipp. Uses code from various people. See 'README' for more! THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK! Playing MPEG stream from test.mp3 ... MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo azalia_open: flags=0x2 azalia_round_blocksize: resultant block size = 9600 azalia_round_blocksize: resultant block size = 9600 azalia_round_blocksize: resultant block size = 4352 azalia_round_blocksize: resultant block size = 4352 azalia_codec_connect_stream: fmt=0x4011 number=1 azalia_codec_connect_stream: leave with 0 [0:10] Decoding of test.mp3 finished. azalia_halt_output azalia_close OpenBSD 4.4-beta (GENERIC) #1: Mon Aug 4 15:59:40 CEST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA C7-M Processor 1200MHz (CentaurHauls 686-class) 1.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR cpu0: RNG AES AES-CTR SHA1 SHA256 RSA real mem = 937717760 (894MB) avail mem = 898027520 (856MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/02/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xfc550 (19 entries) bios0: vendor Hewlett-Packard version 68VGU Ver. F.02 date 04/02/2008 bios0: Hewlett-Packard HP 2133 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge
hp-2133 info and dmesg
No hits in the archives on the hp-2133... dmesg at http://henrik.hellerstedt.com/hp2133/dmesg.txt and below. Installation via a 512mb usb failed, got some strange ERR R very early in the boot process, didnt investigate since pxeboot worked. Networking via cabel works fine, wifi fails. Speedstep on the VIA C7-M seems to fail, cpu is running at max all the time. X via openchrome fails right now: (EE) CHROME(0): Unknown Card-Ids (3371|103C|3030); please report to [EMAIL PROTECTED] (EE) [drm] drmOpen failed. (EE) CHROME(0): [dri] DRIScreenInit failed. Disabling DRI. But there is hope: http://article.gmane.org/gmane.linux.drivers.openchrome.user/910 X via the vesa driver works fine at native resolution: http://henrik.hellerstedt.com/hp2133/Xorg.vesa.log.txt http://henrik.hellerstedt.com/hp2133/xorg.conf.txt The integraded webcam attaches to uvideo and video, but fswebcam fails to grab an image: http://henrik.hellerstedt.com/hp2133/fswebcam.txt Everything else is pretty much untested. Help to get wifi (and other devices) to work is gladly accepted. Sincerely Henrik Hellerstedt OpenBSD 4.4-beta (GENERIC) #1000: Wed Jul 30 03:02:19 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC RTC BIOS diagnostic error 2 cpu0: VIA C7-M Processor 1200MHz (CentaurHauls 686-class) 1.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR cpu0: RNG AES AES-CTR SHA1 SHA256 RSA real mem = 937717760 (894MB) avail mem = 898232320 (856MB) RTC BIOS diagnostic error 2 mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/02/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xfc550 (19 entries) bios0: vendor Hewlett-Packard version 68VGU Ver. F.02 date 04/02/2008 bios0: Hewlett-Packard HP 2133 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 3.0 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5ed0/208 (11 entries) pcibios0: PCI Interrupt Router at 000:17:0 (VIA VT8237S ISA rev 0x00) pcibios0: PCI bus #128 is the last bus bios0: ROM list: 0xc/0xca00 0xcd000/0x1600 cpu0 at mainbus0 cpu0: unknown Enhanced SpeedStep CPU, msr 0x0406060904000609 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1200 MHz (844 mV): speeds: 1200, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 VIA P4M900 Host rev 0x00 pchb1 at pci0 dev 0 function 1 VIA P4M900 Host rev 0x00 pchb2 at pci0 dev 0 function 2 VIA P4M900 Host rev 0x00 pchb3 at pci0 dev 0 function 3 VIA P4M900 Host rev 0x00 pchb4 at pci0 dev 0 function 4 VIA P4M900 Host rev 0x00 VIA P4M900 IOAPIC rev 0x00 at pci0 dev 0 function 5 not configured pchb5 at pci0 dev 0 function 6 VIA P4M900 Security rev 0x00 pchb6 at pci0 dev 0 function 7 VIA P4M900 Host rev 0x00 ppb0 at pci0 dev 1 function 0 VIA VT8377 AGP rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 VIA Chrome9 HC IGP rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: v3, aperture at 0xf000, size 0x1000 ppb1 at pci0 dev 2 function 0 VIA P4M900 PCI-PCI rev 0x80: irq 10 pci2 at ppb1 bus 2 vendor Broadcom, unknown product 0x4315 (class network subclass miscellaneous, rev 0x01) at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 3 function 0 VIA P4M900 PCI-PCI rev 0x80: irq 10 pci3 at ppb2 bus 5 pciide0 at pci0 dev 15 function 0 VIA VT8237S SATA rev 0x00: DMA pciide0: using irq 5 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: TOSHIBA MK1252GSX wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 uhci0 at pci0 dev 16 function 0 VIA VT83C572 USB rev 0xb0: irq 11 uhci1 at pci0 dev 16 function 2 VIA VT83C572 USB rev 0xb0: irq 3 uhci2 at pci0 dev 16 function 3 VIA VT83C572 USB rev 0xb0: irq 7 ehci0 at pci0 dev 16 function 4 VIA VT6202 USB rev 0x90: irq 3 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 VIA EHCI root hub rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 VIA VT8237S ISA rev 0x00 iic0 at viapm0 iic0: addr 0x1d 0f=3b 10=8e 11=82 12=81 13=11 14=11 15=02 16=04 17=84 18=01 19=c1 1a=0d 1b=48 20=07 27=0f 8f=3b 90=8e 91=82 92=81 93=11 94=11 95=02 96=04 97=84 98=01 99=c1 9a=0d 9b=48 a0=07 words 00= 01= 02= 03= 04= 05= 06= 07= spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM pchb7 at pci0 dev 17 function 7 VIA VT8251 VLINK rev 0x00 ppb3 at pci0 dev 19 function 0 VIA VT8237A PCI-PCI rev 0x00 pci4 at ppb3 bus 128 azalia0 at pci4 dev 1 function 0 VIA HD Audio rev 0x10: irq 5 azalia0: codec[s]: Analog Devices/0x194a audio0 at azalia0 ppb4 at pci0 dev 19 function 1 VIA VT8237A PCI-PCI rev 0x00 pci5 at ppb4 bus 7 bge0 at pci5 dev 3 function 0 Broadcom BCM5788 rev 0x03, BCM5705 A3 (0x3003): irq 11, address 00:1f:29:95:cd:10 brgphy0 at bge0 phy 1
Re: How to pf rdr to the same interface?
On Thu, May 24, 2007 at 09:36:25AM +0200, Federico Giannici wrote: I have a firewall with two interfaces, internal and external. I have to redirect some traffic coming from the internal interface to a given host in the internal lan. It doesn't work, and I have just noticed this text in the pf.conf man page: Redirections cannot reflect packets back through the interface they arrive on, they can only be redirected to hosts connected to different interfaces or to the firewall itself. Is there any way to bypass this restriction? Any other suggestion? http://www.openbsd.org/faq/pf/rdr.html#reflect
will Tandberg StorageLoader play nice?
According to ch(4) virtually any tape changer / scsi juke box will work, but before I order one it would be nice if the community could recommend a juke box they know works well. Something like Tandbergs StorageLoader is what I had i mind: http://www.tandbergdatacorp.com/products/products_automation_StorageLoaderLTO2.htm Sincerely Henrik Hellerstedt [EMAIL PROTECTED]
Re: openbsd 4.0 ralink problem low operation range
On Fri, Dec 15, 2006 at 08:51:33PM +1100, Damien Miller wrote: So far for all you people who have complained about lousy ral(4) range or reception, only one of you has posted a dmesg (and even it was incomplete) and none of you have posted your interface config. Don't let this interrupt your complain-fest, but if you want to move beyond whinging and start trying to figure out what the bad performing cards have in common then you know what you have to do... -d Sorry for not posting a full dmesg the first time :\ $ cat /etc/hostname.ral0 inet 10.30.30.1 255.255.255.0 NONE !ifconfig ral0 media autoselect mode 11g mediaopt hostap chan 2 nwid wideopen OpenBSD 4.0-stable (GENERIC) #1: Mon Dec 4 22:21:43 CET 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX cpu0: TSC disabled real mem = 133787648 (130652K) avail mem = 114647040 (111960K) using 1658 buffers containing 6791168 bytes (6632K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf/0x1 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00 sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c6:12:e8 nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c6:12:e9 nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address 00:00:24:c6:12:ea nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 ral0 at pci0 dev 14 function 0 Ralink RT2561 rev 0x00: irq 11, address 00:08:a1:9c:32:f9 ral0: MAC/BBP RT2661B, RF RT2527 gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00 gpio0 at gscpcib0: 64 pins NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wir ed to compatibility wd0 at pciide0 channel 0 drive 0: SanDisk SDCFB-1024 wd0: 4-sector PIO, LBA, 977MB, 2001888 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0 ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 5, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered isa0 at gscpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS gpio1 at nsclpcsio0: 29 pins gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo biomask f3e5 netmask ffe5 ttymask ffe7 pctr: no performance counters in CPU dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 -- Henrik
Re: openbsd 4.0 ralink problem low operation range
On Tue, Dec 12, 2006 at 01:27:19PM +0100, Anis Kadri wrote: Same problem with minipci ral cards max distance: 5-8m. About the same here. 2-3m meters the signal strength is ok 3-6m its a good day if I can connect 6- no connection can be made what so ever The signal strength(if one can call it that) is about the same with different channels and or different pigtails. Tried to change the contact the pigtail is hooked into, and lastly i tried agains wi, malo and ath. Some differences can be noticed, but nothing that make the ral anything near decent. OpenBSD 4.0-stable (GENERIC) #1: Mon Dec 4 22:21:43 CET 2006 cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz ral0 at pci0 dev 14 function 0 Ralink RT2561 rev 0x00: irq 11, address 00:08:a1:9c:32:f9 ral0: MAC/BBP RT2661B, RF RT2527 Not that its a good thing others have problem, but it is good to know Im not alone :) -- Henrik
Re: HP ProLiant DL 385
On Tue, Mar 14, 2006 at 10:43:30PM +0200, edgarz wrote: Looks good! but what is that: Compaq iLO rev 0x01 at pci1 dev 2 function 0 not configured Compaq iLO rev 0x01 at pci1 dev 2 function 2 not configured ? It is a remote server management card, can be afaik on-board or as a add-on card. Integrated Lights-Out. http://h18004.www1.hp.com/products/servers/management/ilo/ cheers
