Re: Device not recognized: T14s gen 2 (intel); soldered intel wifi chip isn't recognized by openbsd.

2021-07-23 Thread Jonathan Gray
On Fri, Jul 23, 2021 at 07:29:21PM +, Alex Beakes wrote: > (this is my first time mailing a mailing list, getting into BSD, long time > linux user; sorry if I got anything wrong.) > > Using a lenovo T14s gen2 intel, intel wifi chip isn't working, looks like the > device isn't being

Re: 6.9 + 001: uvm_fault

2021-05-27 Thread Jonathan Gray
On Thu, May 27, 2021 at 07:57:28AM +0200, Harald Dunkel wrote: > On 5/17/21 12:27 AM, Antonino Sidoti wrote: > > Hi, > > > > I also have this issue on a fresh install of 6.9 amd64. I reported it as a > > bug last week to “bugs” mail list with all appropriate information. I can > > confirm that

Re: OpenBSD on AWS EC2 Nitro

2021-05-19 Thread Jonathan Gray
On Mon, May 17, 2021 at 12:28:39AM +0300, Ilya Voronin wrote: > I was able to fix boot error on t3a (AMD EPYC based) instances (kernel: > protection fault trap at lapic_set_lvt:rdmsr) with this patch (tested > against 6.9): > > Index: arch/amd64/amd64/lapic.c >

Re: 6.9 + 001: uvm_fault

2021-05-16 Thread Jonathan Gray
On Sun, May 16, 2021 at 12:10:33PM +0200, Harald Dunkel wrote: > And another attempt, see attachment. > > Seems I have to power cycle to make it boot. There have been a few reports of this in the last few weeks. An initial workaround patch is in

Re: Does intel(4) support Iris Xe Graphics?

2021-04-07 Thread Jonathan Gray
On Wed, Apr 07, 2021 at 11:34:54AM +0100, Tom Smyth wrote: > Try Current and 6.8 and see if you get a different result in each.. > dmesgs are key for getting help on this type of query ... There is a snapshot dmesg in the bug report. I don't see a benefit to 6.8 or linux dmesgs.

Re: Does intel(4) support Iris Xe Graphics?

2021-04-06 Thread Jonathan Gray
On Tue, Apr 06, 2021 at 11:09:07AM +0400, Michel von Behr wrote: > Hi - (not a dev, just trying to use OpenBSD snapshot) whenever I try to > launch Xorg, either via xenodm or startx, I'm getting a kernel panic, > like "pool_do_get: > drmobj : page empty" (I already sent an e-mail [1] to

Re: New variant of rtl8168h supported?

2021-01-23 Thread Jonathan Gray
On Sat, Jan 23, 2021 at 08:53:44AM -0600, John Batteen wrote: > Just working in chronological order, this patch from j...@jsg.id.au was > sufficient to make it work. I have not tried the subsequent patch from > b...@comstyle.com, though I can if you want. > > re1 at pci4 dev 0 function 0

Re: New variant of rtl8168h supported?

2021-01-22 Thread Jonathan Gray
On Fri, Jan 22, 2021 at 06:58:05PM -0600, John Batteen wrote: > Hi misc, > > I just bought a TP-link TG-3468, and the chip says 8168h on it, but it is not > recognized by 6.8-current. Is this chip truly unsupported or just > unrecognized? > > Thanks, > > John > > The line from dmesg is: >

Re: Difficulty booting UEFI from DVD

2021-01-16 Thread Jonathan Gray
On Sun, Jan 17, 2021 at 03:45:19AM +, ocelot wrote: > Hey guys. I'm trying to install OpenBSD on a laptop, but the UEFI boot > manager doesn't see the DVD. The laptop is a Dell with a Ryzen 4700U, > and only has UEFI boot capability. > > The ISO I'm using is the latest version, 6.8. The ISO

Re: snapshot kernel panic related to radeondrm missing firmware

2021-01-12 Thread Jonathan Gray
On Wed, Jan 13, 2021 at 04:10:46AM +0200, Mihai Popescu wrote: > I took the chance and installed from a recent snapshot - 12.01.2021. I got > a kernel panic at first boot after install, related to missing firmware for > radeondrm. > I disabled the radeondrm then the boot process was fine and I

Re: Issues with Teclast F7 Plus

2020-12-25 Thread Jonathan Gray
On Fri, Dec 25, 2020 at 12:34:36AM -0500, James Hastings wrote: > On 13 Dec 2020, 13:27:48 +, Joel Carnat wrote: > > Hello, > > > > I just got a Teclast F7 Plus laptop and installed OpenBSD 6.8-current on > > it. Most things works except apm and touchpad > > > > Using zzz or ZZZ, it seems

Re: Any insight on drm resetting chip for stopped heartbeat error

2020-12-06 Thread Jonathan Gray
On Sun, Dec 06, 2020 at 11:44:11AM -0800, Joseph Olatt wrote: > Hi, > > I've started seeing the following error on my laptop along with > associated temporary freezing of the system: > > drm:pid90783:intel_gt_reset *NOTICE* Resetting chip for stopped > heartbeat on rcs0 >

Re: 6.8: page fault

2020-11-04 Thread Jonathan Gray
On Wed, Nov 04, 2020 at 07:38:53AM +0100, Harald Dunkel wrote: > Hi folks, > > after applying the recent 4 syspatches for 6.8 one (of 5) openBSD > host ran into the kernel debugger. I missed the error message, but > on a reboot there was a page fault. On another reboot there was no > problem any

Re: OpenBSD UEFI on QEMU emulator

2020-10-22 Thread Jonathan Gray
On Thu, Oct 22, 2020 at 10:37:31PM -0400, Brad Smith wrote: > On 10/22/2020 9:59 PM, Kevin Shell wrote: > > Hello misc@. > > > > I want to try out OpenBSD UEFI. > > How to install OpenBSD with UEFI boot on qemu? > The installer does prompt you during disk setup. > > The install68.iso has no UEFI

Re: AMDGPU(4) - Question about man page

2020-10-21 Thread Jonathan Gray
On Wed, Oct 21, 2020 at 11:13:59AM -0500, flint pyrite wrote: > Question: is the amdgpu(4) manual page up to correct and up to date? > > https://man.openbsd.org/amdgpu The man page is for the xorg driver. > > I set up an xorg.conf file in /etc/X11/xorg.conf and was trying to get > AMDgpu

Re: Inphi CS4223 for 4x 10GbE SFP+

2020-10-19 Thread Jonathan Gray
On Mon, Oct 19, 2020 at 01:28:50PM +0200, Harald Dunkel wrote: > Hi folks, > > I am about to order 2 network appliances, providing an > "Inphi CS4223 for 4x 10GbE SFP+". > > Does this ring a bell? Is this already supported by 6.8? Other > technical specs can be found on > >

Re: firefox freezes X on AMD Ryzen running 6.8

2020-10-17 Thread Jonathan Gray
On Sat, Oct 17, 2020 at 09:51:49PM +0200, Marco Scholz wrote: > I am running 6.8 #116 amd64 on a Thinkpad T495s (AMD Ryzen). Firefox > keeps freezing X. No problem with 6.7. > > Does anybody have this problem too? There are changes coming to the memory handling in drm. The drm_mm changes in

Re: how to figure out reverse package dependency?

2020-08-23 Thread Jonathan Gray
On Sun, Aug 23, 2020 at 08:15:01AM +0200, Matthias wrote: > How do I figure out which packages directly or indirectly depend on a > specific package? Let's assume that only installed packages shall be > considered. > > For example, if 'glib2' is the package in question, 'cairo', > 'gdk-pixbuf',

Re: No xenocara for ATI Radeon HD 2400 XT

2020-08-10 Thread Jonathan Gray
On Sun, Aug 09, 2020 at 10:01:43AM -0600, Andy Bradford wrote: > Thus said Jonathan Gray on Sun, 09 Aug 2020 12:39:36 +1000: > > > When this came up previously running i386 resulted in being able to > > read the atombios. Can you confirm that is the case here? > >

Re: No xenocara for ATI Radeon HD 2400 XT

2020-08-08 Thread Jonathan Gray
On Sat, Aug 08, 2020 at 10:23:13AM -0600, Andy Bradford wrote: > Hello, > > I put OpenBSD 6.7 on an older PC that used to run OpenBSD 6.3 and X just > fine. xenodm refuses to start. Is there something I can do to make this > work (edit sources in xenocara or kernel and recompile), or should

Re: amdgpu: AMD 5700XT (NAVI10) misreported and non-working

2020-08-05 Thread Jonathan Gray
On Sun, Jul 19, 2020 at 04:36:37PM +1000, Jonathan Gray wrote: > On Sun, Jul 19, 2020 at 01:13:51AM -0400, jcm...@gmail.com wrote: > > I saw that much of the amdgpu related drm code had been updated against > > linux 5.7 and decided to try it out using a recent snapshot. While

Re: amdgpu: AMD 5700XT (NAVI10) misreported and non-working

2020-07-19 Thread Jonathan Gray
On Sun, Jul 19, 2020 at 01:13:51AM -0400, jcm...@gmail.com wrote: > I saw that much of the amdgpu related drm code had been updated against > linux 5.7 and decided to try it out using a recent snapshot. While the > amdgpu module loads and is able to mirror to both of my displays when in > a tty,

Re: no u-boot serial output on raspberry pi 3

2020-07-05 Thread Jonathan Gray
On Sun, Jul 05, 2020 at 09:18:55PM +0100, testing999...@zohomail.eu wrote: > i can't get any u-boot serial output from miniroot67.fs on a raspberry > pi 3. i'm using a 'FTDI232' which cost ~$4 - USB to 3.3V jumper > cables, connecting TX to RX and vice versa on GPIO header. > > my serial console

Re: AMDGPU

2020-07-01 Thread Jonathan Gray
On Mon, Jun 29, 2020 at 11:59:28PM -0500, Charlie Burnett wrote: > For sure, whatever helps! > Jun 27 18:58:21 tabr /bsd: [drm] *ERROR* sdma_v4_0: Failed to load firmware > "amdgpu/vega20_sdma.bin" > Jun 27 18:58:21 tabr /bsd: [drm] *ERROR* Failed to load sdma firmware! > Jun 27 18:58:21 tabr

Re: AMDGPU

2020-06-29 Thread Jonathan Gray
On Mon, Jun 29, 2020 at 11:13:49PM -0500, Charlie Burnett wrote: > Hi, > > Wasn’t sure who to tell this to, but with Vega 20 hardware under -current, > there is an issue with the firmware, where it cannot load. Manually > installing the latest amdgpu firmware from kernel.org fixes this seemingly.

Re: [drm] *ERROR* [CRTC:41:pipe ] flip_done timed out

2020-03-08 Thread Jonathan Gray
On Sat, Mar 07, 2020 at 08:50:44PM -0400, Jon Whalen wrote: > Hi there, > > I also receive these errors as well as hangs on an old Dell Inspiron > 1525 with OpenBSD, several releases of Ubuntu Linux, and NetBSD 9.0. > My unqualified assumption is that it's an Intel i915 driver issue and > not an

Re: Brand new server - bad adventures

2020-01-22 Thread Jonathan Gray
On Wed, Jan 22, 2020 at 11:30:51PM +0300, Özgür Kazancci wrote: > Hello everyone! Greetings to misc people! > > Got a brand new dedicated server with a hardware: Intel Xeon-E 2274G - 64GB > DDR4 ECC 2666MHz - 2x SSD NVMe 960GB > and installed "brand new" OpenBSD 6.6 on it. (I'm managing it

Re: sysupgrade woes on beaglebone black

2020-01-10 Thread Jonathan Gray
On Fri, Jan 10, 2020 at 10:06:41AM +0100, Jan Stary wrote: > On Jan 09 11:44:25, h...@stare.cz wrote: > > Installing bsd 100% |**| 6248 KB00:05 ETA > > Installing bsd.rd 100% |**| 11229 KB00:10 ETA > > Installing base66.tgz 100%

Re: netsurf-fb fails on framebuffer console

2019-12-25 Thread Jonathan Gray
On Wed, Dec 25, 2019 at 04:20:04PM +0530, putridsou...@gmail.com wrote: > The port maintainer has confirmed both sdl and x interface > for netsurf-fb require X. > Is it possible to modify sdl source code to work with openbsd > framebuffer driver? In my case it's inteldrm driver. There is old

Re: netsurf-fb fails on framebuffer console

2019-12-25 Thread Jonathan Gray
On Wed, Dec 25, 2019 at 01:57:01PM +0530, putridsou...@gmail.com wrote: > I'm running openbsd 6.6-current Dec24 snapshot > > The browser works perfectly within X. > But fails without it. > Following output is given by command:netsurf-fb -v > > (0.00) utils/log.c:264 nserror

Re: xenocara xcursor issues?

2019-09-29 Thread Jonathan Gray
On Sun, Sep 29, 2019 at 06:42:08PM -0700, Travis Cole wrote: > I've been banging my head on this one long enough that I figured I'd just ask > the list if anyone else is seeing this behavior. > > I'm getting really inconsistent xcursor behavior. > > I've tried setting a few xcursor themes, and

Re: arm on Tinker Board (rk3288) - currently broken?

2019-09-27 Thread Jonathan Gray
On Fri, Sep 27, 2019 at 08:01:53PM -0400, Joe Gidi wrote: > Hello, > > I've seen a number of recent commits for the rk3288 SoC, so I dug out my > Tinker Board and tried to install the latest snapshot (miniroot dated > 27-Sep-2019 06:14). > > I followed the updated directions for this chip: > >

Re: trouble with radeon r9 290 and eduke32

2019-09-21 Thread Jonathan Gray
On Sat, Sep 21, 2019 at 02:37:21PM +0200, Solene Rapenne wrote: > On Sat, Sep 21, 2019 at 09:34:35PM +1000, Jonathan Gray wrote: > > On Sat, Sep 21, 2019 at 12:29:59PM +0200, Solene Rapenne wrote: > > > On Tue, Aug 20, 2019 at 05:40:50PM +1000, Jonathan Gray wrote: > >

Re: trouble with radeon r9 290 and eduke32

2019-09-21 Thread Jonathan Gray
On Sat, Sep 21, 2019 at 12:29:59PM +0200, Solene Rapenne wrote: > On Tue, Aug 20, 2019 at 05:40:50PM +1000, Jonathan Gray wrote: > > On Tue, Aug 20, 2019 at 09:43:48AM +0300, wrote: > > > Hello, > > > When I start eduke32 with LD_PRELOAD=/usr/X11R6/lib/lib

Re: AMDGPU in current issue

2019-09-04 Thread Jonathan Gray
amdgpu tracks the linux-4.19.y (lts) branch of linux-stable currently this is 4.19.69 On Wed, Sep 04, 2019 at 10:28:51AM -0500, Charlie Burnett wrote: > Thanks for the advice! > Do you happen to have a link to the commit amdgpu is at currently? > > On Wed, Sep 4, 2019 at 9:44 AM J

Re: AMDGPU in current issue

2019-09-04 Thread Jonathan Gray
m having to start from scratch? > Best regards, > Charlie Burnett > > On Thu, Aug 1, 2019 at 11:06 PM Jonathan Gray wrote: > > > On Fri, Aug 02, 2019 at 03:11:54AM -0500, Charlie Burnett wrote: > > > Hey- > > > I'd been messing around with the AMDGPU on curr

Re: trouble with radeon r9 290 and eduke32

2019-08-20 Thread Jonathan Gray
On Tue, Aug 20, 2019 at 09:43:48AM +0300, wrote: > Hello, > When I start eduke32 with LD_PRELOAD=/usr/X11R6/lib/libGL.so.17.0 so it > can run in opengl, > on ion fury it freezes after starting the game and whole machine becomes > unresponsive for some time. I can ssh to it from my

Re: Best 1Gbe NIC

2019-08-02 Thread Jonathan Gray
On Fri, Aug 02, 2019 at 09:19:09AM +0100, Andy Lemin wrote: > Hi list, > > I know this is a rather classic question, but I have searched a lot on this > again recently, and I just cannot find any conclusive up to date information? > > I am looking to buy the best 1Gbe NIC possible for OpenBSD

Re: AMDGPU in current issue

2019-08-01 Thread Jonathan Gray
On Fri, Aug 02, 2019 at 03:11:54AM -0500, Charlie Burnett wrote: > Hey- > I'd been messing around with the AMDGPU on current (which I'm aware is very > experimental) and had very few issues with it using a Vega 56 GPU. I > recently swapped to another Vega GPU (Radeon VII) and have issues with the

Re: Blank screen after installing OpenBSD 6.5

2019-07-17 Thread Jonathan Gray
On Wed, Jul 17, 2019 at 01:32:37PM +0200, Stefan Sperling wrote: > On Wed, Jul 17, 2019 at 01:15:26PM +0200, oxst...@gmx.net wrote: > > Hello, > > > > I recently installed OpenBSD 6.5 on an i386 router. > > The intallation process went fine. However, I got a black screen after > > rebooting. > >

Re: Configuration of radeondrm

2019-07-07 Thread Jonathan Gray
On Sun, Jul 07, 2019 at 07:49:58PM +, Ibsen S Ripsbusker wrote: > I have an ATI Radeon HD8490. It seems to be recognized properly > in the dmesg. Also, I can view ttys from either of its two plugs. > > Unfortunately, it is not recognized as a screen for X. The attached > Xorg.0.log is from

Re: Secondary monitor switches off when inteldrm switches on

2019-07-02 Thread Jonathan Gray
On Tue, Jul 02, 2019 at 05:38:35PM -0700, Misc User wrote: > On 7/2/2019 2:45 PM, Henry Jensen wrote: > > Greetings, > > > > to keep it short: > > > > - older Fujitsu Esprimo PC, Core2Duo, Integrated Intel Graphics > > - 2 monitors, connected at VGA and DVI > > - during installation both

Re: Installing OpenBSD on Supermicro A2SDi-4C-HLN4F

2019-06-15 Thread Jonathan Gray
On Sat, Jun 15, 2019 at 09:02:11AM +0100, Richard Laysell wrote: > > Hello, > > I was trying OpenBSD on a Supermicro A2SDi-4C-HLN4F which uses an Intel > Atom CPU (Denverton). The board boots but most devices are not > detected because ACPI can't be enabled. > > Does anyone know if this is

Re: "ucode too large"

2019-06-07 Thread Jonathan Gray
On Fri, Jun 07, 2019 at 03:43:39PM +0200, Paul de Weerd wrote: > I've just replaced my home gateway with a brandless machine with an > i5-7200U. While preparing, I noticed the message "ucode too large" > scrolling by on the serial console, just before the kernel starts. > > The dmesg shows cpu0

Re: Lenovo w/ AMD Ryzen CPU

2019-05-28 Thread Jonathan Gray
On Tue, May 28, 2019 at 09:58:58AM -0700, Chris Cappuccio wrote: > David Anthony [d...@silentsystems.org] wrote: > > All, > > > > The Lenovo release of T*95 series laptops with AMD Ryzen CPU appears > > imminent. > > > > Would these be poor choices for OpenBSD? Are there any anticipated > >

Re: Random system freeze.

2019-05-28 Thread Jonathan Gray
On Tue, May 28, 2019 at 09:25:52AM -, Stuart Henderson wrote: > On 2019-05-23, Paco Esteban wrote: > > Hi misc@, > > > > I've been having some system freezes lately, as others using intel > > graphics. > > > > Sometimes it does not hit in days but sometimes the system hangs 2 or 3 > > times a

Re: Thinkpad A285 mouse issues

2019-05-10 Thread Jonathan Gray
n.timecounter > kern.timecounter.tick=1 > kern.timecounter.timestepwarnings=0 > kern.timecounter.hardware=acpihpet0 > kern.timecounter.choice=i8254(0) tsc(2000) acpihpet0(1000) acpitimer0(1000) > dummy(-100) > > Regards, > > --- > Oriol Demaria > 2FFED630C16E4FF8

Re: Criteria for errata

2019-05-10 Thread Jonathan Gray
On Fri, May 10, 2019 at 09:14:00AM -0400, Ted Unangst wrote: > Jeremy O'Brien wrote: > > I've snagged the 6.5 xenocara.tar.gz, patched it with just that above fix, > > and installed it on my system which has made X rock-stable for me. This is > > totally fine for me personally, but I was curious

Re: Thinkpad A285 mouse issues

2019-05-09 Thread Jonathan Gray
On Thu, May 09, 2019 at 04:17:40PM +0100, Oriol Demaria wrote: > I have this laptop and I'm having issues with this laptop. Wireless has to > be replaced and basically have to wait till the graphics card is properly > supported, right now is running X with the UEFI framebuffer. So this issues >

Re: Xorg blanks until I switch to a TTY and back on 6.5

2019-05-01 Thread Jonathan Gray
On Wed, May 01, 2019 at 12:34:12PM -0300, Daniel Bolgheroni wrote: > On Mon, Apr 29, 2019 at 07:05:25AM +0000, Jonathan Gray wrote: > > Does this help? > > It was already commited but fixed the problem here. > > However, I still can't see the correct modes set for LVDS-1 a

Re: Xorg blanks until I switch to a TTY and back on 6.5

2019-04-29 Thread Jonathan Gray
On Sun, Apr 28, 2019 at 07:26:54PM -0400, Charles wrote: > Hello list, > > Ever since the new inteldrm driver got merged into -current, shortly > before the 6.5 release, I'm seeing an odd new behavior on my Thinkpad > T430 -- when an external display is connected, Xorg blanks all screens > (but

Re: some more info about ?? hangs

2019-04-27 Thread Jonathan Gray
On Sat, Apr 27, 2019 at 04:55:50PM +0300, Gregory Edigarov wrote: > attached please find dmesg and backtrace of X when that happen again > hope this bug report will be more useful than previous one. > > thank you. > -- > With best regards, > Gregory Edigarov Likely fixed by

Re: Patch for X crash on 6.4 and 6.5

2019-04-27 Thread Jonathan Gray
On Fri, Apr 26, 2019 at 11:57:14AM -0700, Joe M wrote: > Hello, > > I had this same issue with 6.4 and 6.5. Applying this patch has fixed > the issue. I am using 2 radeon gpu's. > > https://patchwork.freedesktop.org/series/28284/ Thanks for the report and tracking this down. I've committed

Re: current snapshot kernel uvm fault radeondrm firmware not found

2019-04-19 Thread Jonathan Gray
On Sat, Apr 20, 2019 at 12:58:06AM +0300, Mihai Popescu wrote: > Here is the error message part: > > initializing kernel modesetting (Rs880 0x1002:0x9715 0x17AA:0x3082 0x00). > r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" > [drm] *ERROR* Failed to load firmware! > drm:pid0:

Re: GMA500 drivers

2019-03-25 Thread Jonathan Gray
On Mon, Mar 25, 2019 at 07:50:30AM +, Maurice McCarthy wrote: > On 23/03/2019, Normen Wohner wrote: > > I have now successfully installed OpenBSD > > on my Netbook, however Graphics performance > > is abysmal. > > I know that sadly Linux uses binary blobs for > > the GMA500 as it is a

Re: No network with latest snap (5jan-19)

2019-01-05 Thread Jonathan Gray
On Sat, Jan 05, 2019 at 03:39:34PM +0100, Christer Solskogen wrote: > On my APU2 I got no network with the latest snap. > > I get this in the console: > starting network > ifconfig: SIOCSETPFSYNC: Invalid argument > ifconfig: SIOCSVH: Invalid argument > ifconfig: SIOCSETPFSYNC: Invalid argument >

Re: X server gbm: failed to open any driver

2018-12-03 Thread Jonathan Gray
On Mon, Dec 03, 2018 at 08:06:18PM +0300, Denis wrote: > When X server starts on OpenBSD6.4amd64 I'm getting the message below > > ... > (II) [KMS] Kernel modesetting enabled. > gbm: failed to open any driver (search paths /usr/X11R6/lib/modules/dri) > gbm: Last dlopen error: File not found >

Re: OpenBSD/landisk on J-core/J2 based systems?

2018-12-03 Thread Jonathan Gray
On Mon, Dec 03, 2018 at 01:16:09PM -0500, Charles A Daniels wrote: > I'm curious to know if anyone involved with OpenBSD/landisk has any > comments on J-core[1]? It claims to implement SuperH and capability to > boot Linux on an FPGA. > > To that end, has anyone tried booting OpenBSD/landisk on a

Re: radeondrm failure on amd64 but not on i386?

2018-11-25 Thread Jonathan Gray
On Mon, Nov 19, 2018 at 08:37:01AM -0700, Andy Bradford wrote: > Thus said Jonathan Gray on Mon, 19 Nov 2018 20:42:46 +1100: > > > > Thanks for the suggestion. Here's the additional output provided by your > > > patch: > > > > > > radeon_atrm_get_bi

Re: radeondrm failure on amd64 but not on i386?

2018-11-19 Thread Jonathan Gray
On Sun, Nov 18, 2018 at 10:47:10PM -0700, Andy Bradford wrote: > Thus said Jonathan Gray on Sat, 17 Nov 2018 14:08:53 +1100: > > > There are many ways of getting an atom bios it would be helpfull to > > know which method is having trouble. > > Thanks for the suggestio

Re: radeondrm failure on amd64 but not on i386?

2018-11-16 Thread Jonathan Gray
On Thu, Nov 15, 2018 at 09:15:48PM -0700, Andy Bradford wrote: > Hello, > > I recently installed OpenBSD 6.4 amd64 and radeondrm fails to load > properly. I then installed OpenBSD 6.4 i386 on the same hardware (to a > USB pendrive) and it works fine. Any ideas? There are many ways of

Re: Keyboard repeats characters way to often

2018-09-18 Thread Jonathan Gray
On Wed, Sep 19, 2018 at 03:03:12AM +0200, Leo Unglaub wrote: > > > The only big problem I have is that as soon as I start X I cannot use the > > > keyboard correctly. Every time I type a character on the keyboard it gets > > > repeated multiple times. Most often it gets repeated between 3 and 7 >

Re: Keyboard repeats characters way to often

2018-09-18 Thread Jonathan Gray
On Wed, Sep 19, 2018 at 12:27:29AM +0200, Leo Unglaub wrote: > Hi, > today I got my new Laptop. A Lenovo ThinkPad E485 with an AMD Ryzen CPU. I > installed the latest OpenBSD -current on the device and a lot of stuff work > very well. I used the traditional installation method without EFI. Only

Re: Can't open /dev/bio on arm

2018-08-05 Thread Jonathan Gray
On Sun, Aug 05, 2018 at 10:39:10AM +0200, Janne Johansson wrote: > Is there MAKEDEV things to add also? No, the MAKEDEV and conf.c parts are already there. It should be possible to use softraid with ramdisks on arm* with future snapshots, just not as a boot volume.

Re: Can't open /dev/bio on arm

2018-08-05 Thread Jonathan Gray
On Sat, Aug 04, 2018 at 06:38:20PM +1000, Jonathan Gray wrote: > On Sat, Aug 04, 2018 at 05:37:11PM +1000, Jonathan Gray wrote: > > On Sat, Aug 04, 2018 at 09:33:45AM +0300, Kihaguru Gathura wrote: > > > Hi, > > > > > > I am getting message: bioctl: Can't

Re: Can't open /dev/bio on arm

2018-08-04 Thread Jonathan Gray
On Sat, Aug 04, 2018 at 05:37:11PM +1000, Jonathan Gray wrote: > On Sat, Aug 04, 2018 at 09:33:45AM +0300, Kihaguru Gathura wrote: > > Hi, > > > > I am getting message: bioctl: Can't open /dev/bio: Device not configured > > > > No clue whatsoever on ho

Re: Can't open /dev/bio on arm

2018-08-04 Thread Jonathan Gray
On Sat, Aug 04, 2018 at 09:33:45AM +0300, Kihaguru Gathura wrote: > Hi, > > I am getting message: bioctl: Can't open /dev/bio: Device not configured > > No clue whatsoever on how to go about this. Please assist. > > Instructions > --

Re: Plans to port the amdgpu(4) driver? (=to support Radeons made 2014/2015 and after.) Hardware/other donations needed?

2018-04-26 Thread Jonathan Gray
On Wed, Apr 25, 2018 at 10:49:53AM -0400, Joe Gidi wrote: > > > On Wed, Apr 25, 2018 at 09:08:12PM +1000, Jonathan Gray wrote: > >> drivers/gpu/drm/amd in linux has over 1.5 million lines of code. Which > >> is multiple times larger than the complete OpenBSD k

Re: Plans to port the amdgpu(4) driver? (=to support Radeons made 2014/2015 and after.) Hardware/other donations needed?

2018-04-25 Thread Jonathan Gray
On Wed, Apr 25, 2018 at 03:10:15AM -0400, Joseph Mayer wrote: > Hi! > > Radeon drivers are specific per Radeon microarchitecture and Radeon > microarchitecture version. > > The Radeon microarchitectures to date are TS 1, TS 2, TS 3, GCN 1, GCN > 2, GCN 3, GCN 4, GCN 5 (TS = TeraScale and GCN =

Re: pine64-lts - can't detect disk

2018-04-13 Thread Jonathan Gray
On Fri, Apr 13, 2018 at 11:05:06AM -0700, jungle Boogie wrote: > On 13 April 2018 at 09:39, Jonathan Gray <j...@jsg.id.au> wrote: > > On Fri, Apr 13, 2018 at 09:19:23AM -0700, jungle Boogie wrote: > >> On 13 April 2018 at 08:30, jungle Boogie <jungleboog...@gmai

Re: pine64-lts - can't detect disk

2018-04-13 Thread Jonathan Gray
On Fri, Apr 13, 2018 at 09:19:23AM -0700, jungle Boogie wrote: > On 13 April 2018 at 08:30, jungle Boogie wrote: > > Hi All, > > > > So between Peter Hessler's post here: > > https://bsd.network/@phessler/99389809617980837 > > > > And the install instructions for arm64: >

Re: 6.3 : how to check microcode?

2018-04-03 Thread Jonathan Gray
On Tue, Apr 03, 2018 at 01:36:57PM +0200, Maurice Janssen wrote: > Hi, > > I just installed 6.3 and it seems to work great. > I've a question about the microcode. Is there a way to check whether an > updated microcode was installed??? I have an i5 Ivybridge CPU and the Intel > microcode is in

Re: OpenBSD 6.2 amd64 and ATI Radeon 9550

2018-03-24 Thread Jonathan Gray
On Fri, Mar 23, 2018 at 06:12:26PM +0100, Freen wrote: > Hi all > > I have installed OpenBSD 6.2 AMD64 on my old PC consisting of: > Motherboard: MSI K8N Neo2 Series (MS-7025); > Graphic card: Sapphire (ATI) Radeon 9550/X1050 Series (RV350) AGP 8x. > > Unfortunately, things don't work very

Re: X server keeps crashing in current/amd64

2018-03-22 Thread Jonathan Gray
On Thu, Mar 22, 2018 at 07:21:33PM +0100, Robert wrote: > On Tue, 20 Mar 2018 22:11:21 +0100 > Robert wrote: > > I am happy to report that with the latest snapshot (20.3.) the > > crashing problem seems to be gone. > > Well, that was an early celebration. > The

Re: X server keeps crashing in current/amd64

2018-03-17 Thread Jonathan Gray
On Sat, Mar 17, 2018 at 10:40:55PM +0100, Robert wrote: > Hi, > > Since about two weeks the X server keeps crashing (segfault) most of the > time when I start it (through xenodm). > I have to restart it (rcctl restart xenodm) about 5-10 times > until I get an (xfce) session that stays stable. >

Re: Lenovo X61 (notebook not tablet) does not return from sleep

2018-03-15 Thread Jonathan Gray
On Thu, Mar 15, 2018 at 10:10:18PM -0700, Mike Larkin wrote: > On Thu, Mar 15, 2018 at 11:55:53PM -0500, Z Ero wrote: > > If the adapter is ejected before closing the laptop lid there is no > > problem waking from sleep. But is a minor inconvenience to eject the > > adapter. Would it be possible

Re: System hangs after detecting radeondrm

2018-03-10 Thread Jonathan Gray
On Sun, Mar 11, 2018 at 12:15:11AM +, Kaashif Hymabaccus wrote: > Hello > > I have a sparc64 machine with no real graphics card, only the onboard > Mach64 framebuffer. I found an ATI Radeon 9200 and decided to see if > it works, then I could run X, test some graphical ports, etc. > > My

Re: drm permissions error with i965 on amd64 6.2 with libGL applications

2018-03-03 Thread Jonathan Gray
On Sat, Mar 03, 2018 at 06:48:21AM -0600, ed...@pettijohn-web.com wrote: > > On Mar 3, 2018 5:52 AM, Z Ero wrote: > > > > "libGL error: failed to open drm device: Permission denied > > libGL error: failed to load driver: i965" > > > > I can solve it by changing the

Re: Support for AMD/ATI Firepro M7820

2018-02-10 Thread Jonathan Gray
On Sat, Feb 10, 2018 at 03:18:22PM -0800, Raymond Lillard wrote: > I have a Dell M6500 Precision workstation with an Nvidia FX 3800M. > > I would like to wipe it and install OBSD. I can get a Firepro M7820 > for it.?? If I do, will any of the OBSD drivers work or will I > be stuck with fb

Re: AMD Pro A10/A12 Radeon R7 Support

2018-01-22 Thread Jonathan Gray
On Mon, Jan 22, 2018 at 07:06:32PM -0800, Bryan Vyhmeister wrote: > On Tue, Jan 23, 2018 at 11:57:35AM +1100, Jonathan Gray wrote: > > On Mon, Jan 22, 2018 at 10:43:03AM -0800, Bryan Vyhmeister wrote: > > > I have been looking at the new Lenovo ThinkPad A275 which is much like &

Re: AMD Pro A10/A12 Radeon R7 Support

2018-01-22 Thread Jonathan Gray
On Mon, Jan 22, 2018 at 10:43:03AM -0800, Bryan Vyhmeister wrote: > I have been looking at the new Lenovo ThinkPad A275 which is much like > the X260/X270 but with AMD Pro A10 or A12 chip and graphics. I am > interested in looking at something other than Intel for the first time > in more than a

Re: no sound by "Intel 6321ESB HD Audio"

2017-12-03 Thread Jonathan Gray
On Mon, Dec 04, 2017 at 01:37:53PM +0900, Tuyosi T wrote: > i install openbsd 6.2 into mac pro 2006 . > (boot by fedora's grub ) > > but i cannot hear sound . > > $ dmesg | grep audio > audio0 at azalia0 > > $ dmesg | grep azalia > azalia0 at pci0 dev 27 function 0 "Intel 6321ESB HD Audio" rev

Re: Radeon discrete graphics issues

2017-11-19 Thread Jonathan Gray
Instruction set. > > Hopefully it's something that will be supported in the not too distant > future.Until then, it's back in my box. > > Thanks all. > > On 19 November 2017 at 01:34, Jonathan Gray <j...@jsg.id.au> wrote: > > > The userland driver th

Re: Radeon discrete graphics issues

2017-11-18 Thread Jonathan Gray
, Timothy Legge wrote: > I copy/pasted "OLAND Radeon HD 8000 series" from the radeon(4) > <https://man.openbsd.org/radeon> man page under the section header > "Supported Hardware". Maybe I'm missing something. > > On 19 November 2017 at 01:08, Jonathan G

Re: Radeon discrete graphics issues

2017-11-18 Thread Jonathan Gray
On Sat, Nov 18, 2017 at 07:43:03PM +, Timothy Legge wrote: > @Maurice, Don't worry about teaching me to suck eggs, I'd rather cover all > the bases :) > > I've run "fw_update -a" to ensure that the drivers are installed and where > they need to be. (Bit overkill I know, but I'd rather be

Re: RPI3 fails to relink kernel

2017-10-17 Thread Jonathan Gray
On Tue, Oct 17, 2017 at 04:48:19PM -0700, Carlos Cardenas wrote: > Howdy. > > I found a working USB (Sandisk Cruzer Fit 8GB) to install 6.2 on a RPI3. > > Install went fine and so was first boot, then I noticed that relinking > the kernel failed. > > Below is my dmesg and error log. > > I

Re: X710 10Gb card not configured

2017-09-27 Thread Jonathan Gray
On Wed, Sep 27, 2017 at 03:53:26AM -0700, James A. Peltier wrote: > - On 26 Sep, 2017, at 20:25, Jonathan Gray j...@jsg.id.au wrote: > > | On Tue, Sep 26, 2017 at 05:35:40PM -0700, James A. Peltier wrote: > |> Hi Misc, > |> > |> I am running the latest Open

Re: X710 10Gb card not configured

2017-09-26 Thread Jonathan Gray
On Tue, Sep 26, 2017 at 05:35:40PM -0700, James A. Peltier wrote: > Hi Misc, > > I am running the latest OpenBSD snapshot and it appears that the 10Gb cards > that we have in the unit aren't recognized or configured properly. I had a > look at pcidevs and pcidevs.h files in src/dev/pci and it

Re: TouchPad on Asus UX390

2017-08-27 Thread Jonathan Gray
On Sun, Aug 27, 2017 at 03:04:58PM +0200, Remi Locherer wrote: > Hi, > > recently I bought a Asus UX390. It's very small and light notebook > (less than 1 kg!). OpenBSD runs fine on it. Only its touchpad is not > supported. > > In the dmesg this is shown (full dmesg at the bottom): > "ELAN1301"

Re: Pinebook (if anyones up for it)

2017-08-20 Thread Jonathan Gray
On Mon, Aug 21, 2017 at 12:17:20AM +1000, Jonathan Gray wrote: > On Tue, Aug 15, 2017 at 09:48:14AM -0400, Patrick Wildt wrote: > > On Mon, Aug 14, 2017 at 10:08:13PM +0300, valerij zaporogeci wrote: > > > 2017-08-14 10:21 GMT+03:00, Alex Naumov <alexander_nau...@opensus

Re: Pinebook (if anyones up for it)

2017-08-20 Thread Jonathan Gray
On Tue, Aug 15, 2017 at 09:48:14AM -0400, Patrick Wildt wrote: > On Mon, Aug 14, 2017 at 10:08:13PM +0300, valerij zaporogeci wrote: > > 2017-08-14 10:21 GMT+03:00, Alex Naumov : > > > Hello, > > > > > > there is one enthusiast, who wants to make it possible: > > >

Re: booting 6.1

2017-06-08 Thread Jonathan Gray
On Thu, Jun 08, 2017 at 03:10:33PM -0300, Friedrich Locke wrote: > Hi folks, > > i burnt and install61.iso cd and tried to boot uefi, but could not. > Does anybody know this amd64 6.1 install image support booting UEFI ? > > Thanks in advance The iso does not handle uefi at the moment. Write

Re: OpenBSD 6.1 ix Intel 82598EB issue

2017-04-24 Thread Jonathan Gray
On Mon, Apr 24, 2017 at 12:31:52PM +0200, Robert Blacquiere wrote: > > Hi, > > I have updated one of our machines from 6.0 to 6.1. > It has 2 dual 10 gb interfaces . One of them a Intel 82598EB based > dual card will not initialize any more. > > The other 10gig works and is based on Intel

Re: printf(3): extra parameters, %b token, and cpp antics

2017-04-23 Thread Jonathan Gray
On Sun, Apr 23, 2017 at 03:39:22AM -0400, Ian Sutton wrote: > I noticed some strange code in src/sys/arch/armv7/omap/ommmc.c > > This preprocessor define seems to map intr. state bit positions with > strings describing them: > > 149 #define MMCHS_STAT_FMT "\20" \ > 150 "\x09d_BADA" \ > 151

Re: OpenBSD 6.1-snapshot boot issues in bhyve

2017-04-04 Thread Jonathan Gray
On Wed, Apr 05, 2017 at 12:46:27PM +1000, Jason Tubnor wrote: > Hi, > > Just wondering if anyone else is seeing the same issue I am booting a > 6.1-snapshot in bhyve? In preparation for the 6.1 pending release, I have > tried to spin up 6.1-snap to iron out any issues in bhyve but I don't get >

Re: -current cvs update failure

2017-03-22 Thread Jonathan Gray
On Wed, Mar 22, 2017 at 07:20:54PM -0500, mitchell wodach wrote: > I am having trouble getting my src tree updated. When I try running > cvs the following output is produced: > $ cd /usr/src > $ cvs -q up -Pd > > cvs server: WARNING: Read-only repository access mode selected via `cvs -R'. >

Re: Raspberry Pi 3 booting from USB

2017-03-06 Thread Jonathan Gray
On Tue, Mar 07, 2017 at 06:58:25AM +0100, Otto Moerbeek wrote: > On Mon, Mar 06, 2017 at 05:58:36PM +1100, Jonathan Gray wrote: > > > On Mon, Mar 06, 2017 at 07:46:30AM +0100, Otto Moerbeek wrote: > > > On Sun, Mar 05, 2017 at 09:41:27AM -0500, Joe Gidi wrote: >

Re: Raspberry Pi 3 booting from USB

2017-03-05 Thread Jonathan Gray
On Mon, Mar 06, 2017 at 07:46:30AM +0100, Otto Moerbeek wrote: > On Sun, Mar 05, 2017 at 09:41:27AM -0500, Joe Gidi wrote: > > > I was stuck at that point for a while. Make sure you have everything you > > need > > to boot on the DOS partition of your USB drive; mine was missing u-boot.bin. > >

Re: Raspberry Pi 3 booting from USB

2017-03-05 Thread Jonathan Gray
s only recognizing 128 MB > >of > RAM until I switched to using the DTB and fixup.dat files from Raspbian. Seems > that those /boot/ files should be kept in sync. > > Thanks for all your work on this new platform! > > On March 5, 2017 3:36:16 AM EST, Jonathan Gray <j...@jsg.id.a

Re: Raspberry Pi 3 booting from USB

2017-03-05 Thread Jonathan Gray
On Sun, Mar 05, 2017 at 09:23:13AM +0100, Otto Moerbeek wrote: > On Sun, Mar 05, 2017 at 07:00:46PM +1100, Jonathan Gray wrote: > > > On Sun, Mar 05, 2017 at 08:37:30AM +0100, Otto Moerbeek wrote: > > > On Sat, Mar 04, 2017 at 06:40:57PM -0500, Joe Gidi wrote: > > >

  1   2   3   4   5   6   >