Re: HP ProLiant DL320 v. Sun Fire V125

Hi, sorry for the late response, the mail just got marked as junk :( KM enabling acpi How exactly do you do it? Mine acpi-related lines are its already in the default kernel, not sure if its enabled by default. # config -ef /bsd.mp ... ukc enable acpi 414 acpi0 enabled KM enabling

Re: multipath routing with OpenBGPD

We use this filters like this match to $provider1Main set metric low match to $provider1Backup set metric middle match to $provider2Main set metric high cheers Kai On Sat, Nov 03, 2007 at 01:20:26PM +0100, Florian Fuessl wrote: Hi Gregory, we have multiple redundant FE upstream peerings

Re: HP ProLiant DL320 v. Sun Fire V125

Hi, We run quite fine here with 4.2-current from today on a DL320G5, after: enabling write cache in the HP Bios ! enabling amd64 bsd.mp enabling acpi enabling write cache for wd0 in the system with: # atactl wd0 writecacheenable Before we had horrible 2MByte write speed, now we have 67MByte.

Re: intel pro/1000 PT PF

Does this also apply to amd64 ? Thanks Kai Hello all, I just wanted to know if the network cards : - - intel pro/1000 PT quad port Works fine here with 4.1 :) - - intel pro/1000 PF (SX) quad port are surported by 4.1 I can found the 1000MT or 1000MF on the hardware page, but they are

sasyncd status ( 4.0 RELEASE )

Hi, Is sasyncd running reliable on isakmpd in Initiator mode (any special settings, like timeouts etc) ? Is sasyncd running reliable on isakmpd in Responder mode? (any special settings, like timeouts etc) ? Is isakmpd supposed to run 100% clean (no SA problems/tunnel timeouts) with

Re: Issue with carp int going to MASTER state on two boxes

Hi, can you run a tcpdump on your physical interface an see if you receive carp advertisements from the other box in the form of 09:53:25.278656 CARPv2-advertise 36: vhid=42 advbase=1 advskew=1 demote=0 (DF) [tos 0x10] and/or do you have firewalling which might block the carp traffic?

Re: isakmpd + carp + sasyncd failover problems

We are running productive already, hence an update to -current is too good at the moment. Please let me know if it brings some enhancements. I will setup another test scenario then. cheers Kai On Thu, Jan 18 2007 at 14:16, Kai Mosebach wrote: we are using 3 Soekris firewall pairs in our

isakmpd + carp + sasyncd failover problems

Hi guys, we are using 3 Soekris firewall pairs in our companies setup to provide failover IPSec connections between 3 sites using OpenBSD 4.0 RELEASE. The big picture looks like this : A - B (passive) A - C (passive) B - C (passive) By now its basically working fine, but with the IPSec