Re: Attempting to use Brother DCP-L2510D printer on BSD

2021-02-25 Thread Predrag Punosevac
# Message will be discarded unless file is saved From: Predrag Punosevac # To:, Cc: and Bcc: support a ?single modifier: To?: exa, To: misc@openbsd.org Cc: jor...@geoghegan.ca Subject: Re: Attempting to use Brother DCP-L2510D printer on BSD On 2/24/21 9:43 AM, Sylvain S wrote: > Hello, >

Re: Help with ssh(1) between OpenBSD and iSH/Alpine on iOS

2021-02-06 Thread Predrag Punosevac
Erling Westenvik wrote: > Hi, > Last year I discovered the iSH app, "The Linux shell for iOS" > (https:/ish.app), "a project to get a Linux shell environment running > locally on your iOS device, using a usermode x86 emulator". It's an > Alpine Linux distribution with the Almquist shell (ash)

Re: Cisco AnyConnect Secure Mobility Client Alternatives with MFA?

2021-01-31 Thread Predrag Punosevac
> On Sun, 2021-01-31 at 21:41 +0300, somebody from mother Russia wrote: > > Hello, > > Our employer decided that AnyConnect Secure Mobility Client with > > multifactor Azure authentication is the only secure option to connect > > to > > work. No alternatives, no discussions. > > There are

Re: Enhancing Privacy in 2020 attached screenshot

2020-12-21 Thread Predrag Punosevac
Arib Mason wrote: > On Sat, Dec 19, 2020 at 2:01 PM Ashlen wrote: > > > > On 20/12/16 22:55, pipus wrote: > > > haha Stuart. > > > Always there to make a low IQ entrance :) > > Ever hear of Dunning-Kruger, pipus? > > > >

Re: OpenBSD as a NAS

2020-12-03 Thread Predrag Punosevac
Ashton Fagg wrote: > Hi all, > > I'm currently in the process of provisioning a new NAS for home. It's > replacing an older Synology unit that ticks me off in so many ways. > > I am looking to hear other's experiences with using OpenBSD as a NAS - > specifically in terms of reliability, and for

Re: Advice on using intrusion detection

2020-11-21 Thread Predrag Punosevac
On 2020-11-20 17:15, Erik Lauritsen wrote: > Is it recommended to run some kind of intrusion detection on an > OpenBSD router/firewall? > What do you mean by "some kind of intrusion detection" (IDS). At the risk of sounding patronizing I would start by clarifying terminology. I got confused by

Re: A new race condition in OpenVPN and Unbound services

2020-11-21 Thread Predrag Punosevac
Thanks to everyone replaying to this thread. I carefully re-reading as kindly pointed out by Stefan. I ended up implementing this paragraph Using an /etc/hostname.* file without persist-tun - OpenVPN normally re-creates the tun/tap interface at

A new race condition in OpenVPN and Unbound services

2020-11-20 Thread Predrag Punosevac
Hi Misc, Has anybody else noticed a new race condition causing Unbound to fail due to the fact that OpenVPN interface is not available. Since a few releases ago I have this in my rc.conf.local to start openvpn server and unbound openvpn_flags=--config /etc/openvpn/server.conf

Re: Sound/audio onFirefox on 6.8

2020-10-24 Thread Predrag Punosevac
Mihai Popescu wrote: > > ATI Radeon HD 5470 Audio > > That should be the HDMI audio from the video card and as far as i know > there is no support in OpenBSD for HDMI audio output. > There lines from dmesg you need are: > > azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic

Re: Sound/audio onFirefox on 6.8

2020-10-24 Thread Predrag Punosevac
Duncan Patton a Campbell wrote: > doesn't work. Works fine elsewhere. Granted this is also > a ten year old board. > > following is dmesg. Any ideas are apreciated. > > Thanks, > > Dhu According to your dmesg your audio device is ATI Radeon HD 4200 HD Audio I am using ATI Radeon HD

Re: Digikam no longer finding cameras on 6.8.

2020-10-24 Thread Predrag Punosevac
Mario St-Gelais wrote: > Anyone experiencing similar experience? Since I moved to 6.8, my > cameras, Canon 7D and 5D are no longer found by Digikam. Is there > something that changes? > > > 17:00 marst@hotrod:~$ dmesg|grep Canon > ugen2 at uhub0 port 6 "Canon Inc. Canon Digital Camera" rev

UNIX printing demystified

2020-10-20 Thread Predrag Punosevac
ike you could contribute to UNIX printing. Why not hack on the LPD itself. At some point Eric Faurot was working on the new lpd server for OpenBSD https://undeadly.org/cgi?action=article;sid=20180509184829 Why don't go step further and implement IPP protocol inside LPD? Who need CUPS? Most Kind Regards, Predrag Punosevac

Re: Input Filter and LPD

2020-10-19 Thread Predrag Punosevac
Ian Darwin wrote: > > Just for the Internet Archive. This is fixed in 6.8 release. Printing > > works as expected. CUPS is not needed around here. > > Not to complain, but curious: can you send any combination of plain text, > postscript and PDF via lpd? If so, what input filter(s) are you

Re: Input Filter and LPD

2020-10-19 Thread Predrag Punosevac
punoseva...@gmail.com (Predrag Punosevac), 2020.06.08 (Mon) 23:57 (CEST): > It seems that there is another change on 6.7 perhaps among packages > which broke printing for me. I am using built in LPD to print onto the > network connected Brother HL-5250DN. I am getting row PostScri

Re: Does DNS need TCP?

2020-09-20 Thread Predrag Punosevac
Nicolai wrote : > On Sun, Sep 20, 2020 at 12:43:41AM -0400, Predrag Punosevac wrote: > > > For number of years I had in my /var/unbound/etc/unbound.conf line > > > > do-tcp: no > > > To make things worse I was blocking port TCP port 53. > > Just curi

Is altroot a sysupgrade foe?

2020-09-19 Thread Predrag Punosevac
r the OS. Most Kind Regards, Predrag Punosevac

Does DNS need TCP?

2020-09-19 Thread Predrag Punosevac
to the documentation which I can use to educate myself. Most Kind Regards, Predrag Punosevac

Re: Troubleshooting rsync

2020-09-05 Thread Predrag Punosevac
Greg Thomas wrote: > Hey all, I'm trying to use WSL on Windows 10 to backup to my OpenBSD server > running 6.7 release. It looks like Debian on WSL is using rsync version > 3.1.2. I tried both the rsync package and openrsync on OpenBSD with the > same results.Basically rsync never exits

How to split install.wim

2020-09-01 Thread Predrag Punosevac
Hi All, I am using my desktop predrag@oko$ uname -a OpenBSD oko.int.bagdala2.net 6.7 GENERIC.MP#5 amd64 to create a bootable Windows 10 USB flash drive. It is a paid job although I would not be surprised that my consent to do it, is consistent with the early signs of dementia. I just wasted a

Re: 019_libssl.patch regression

2020-08-12 Thread Predrag Punosevac
Theo Buehler wrote: > On Tue, Aug 11, 2020 at 05:26:22PM -0400, Predrag Punosevac wrote: > > This is a regression report for 019_libssl.patch > > After applying libssl binary patch to 6.7 release s-nail-14.9.19 can no > > longer close STARTTLS IPMI session with Gmail serve

Re: Adding more syspatch platform.

2020-08-11 Thread Predrag Punosevac
Theo de Raadt wrote: > > No, it is a question of which additional platform, you avoided that > didn't you > octeon is the only one I can think of. arm64 binary patches are available for few releases already. The binary patches might be the least of the troubles on that platform.

019_libssl.patch regression

2020-08-11 Thread Predrag Punosevac
This is a regression report for 019_libssl.patch predrag@oko$ uname -a OpenBSD oko.int.bagdala2.net 6.7 GENERIC.MP#5 amd64 predrag@oko$ syspatch -l 001_wscons 002_rpki 003_ssh 004_libssl 005_unbound 006_smtpd_sockaddr 007_perl 008_hid 009_asr 010_x509 011_shmget 012_tty 013_tty 014_iked 015_rpki

Re: Julia on OpenBSD?

2020-08-08 Thread Predrag Punosevac
> On July 13 2018 Predrag Punosevac wrote: > > > Hello, > > > > has anyone any experience with running Julia (language) > > on OpenBSD? How difficult was it to set it up? (It isn't > > in the Ports.) > > > > > > As somebody already pointed o

Re: ssh X forwarding and google-chrome

2020-07-02 Thread Predrag Punosevac
Gregory Edigarov wrote: > Hello, everybody > > does anybody know if there is any tricks? > > In my office pc (currently linux) I have google-chrome installed, and I > absolutely need to access it from home. > > "ssh -Y google-chrome" just shows an empty and blank window, > no menu, no

Re: Input Filter and LPD

2020-06-09 Thread Predrag Punosevac
Marcus MERIGHI wrote: > punoseva...@gmail.com (Predrag Punosevac), 2020.06.08 (Mon) 23:57 (CEST): > > It seems that there is another change on 6.7 perhaps among packages > > which broke printing for me. I am using built in LPD to print onto the > > network connected Br

Re: sane-backends permission problems

2020-06-09 Thread Predrag Punosevac
Maurice McCarthy wrote: > Add your user to the operator group. > Regards Hi Maurice, My user is already in the operator group and for that matter in wheel group. However, your email made me poke little bit more into this issue. These are the changes that coused the "problem" for me personally.

Re: sane-backends permission problems

2020-06-08 Thread Predrag Punosevac
Predrag Punosevac wrote: > Hi Misc, > > I am trying for the first time to scan a document on > > predrag@oko$ uname -a > OpenBSD oko.int.bagdala2.net 6.7 GENERIC.MP#2 amd64 > > Can somebody familiar with the changes in permissions between releases > and 6.6 and 6.

Input Filter and LPD

2020-06-08 Thread Predrag Punosevac
It seems that there is another change on 6.7 perhaps among packages which broke printing for me. I am using built in LPD to print onto the network connected Brother HL-5250DN. I am getting row PostScript output on the printer instead of the document. This is the relevant printcap entry

sane-backends permission problems

2020-06-08 Thread Predrag Punosevac
Hi Misc, I am trying for the first time to scan a document on predrag@oko$ uname -a OpenBSD oko.int.bagdala2.net 6.7 GENERIC.MP#2 amd64 Can somebody familiar with the changes in permissions between releases and 6.6 and 6.7 help me out how to enable scanning for a non root user This is what I am

OpenSMTP relaying to multiple mail servers

2020-06-06 Thread Predrag Punosevac
Hi Misc, I have a very noob question. Is it possible to configure OpenSMTP to use multiple relay servers? I would like to be able to do the following. mail -r someb...@gmail.com miscATopenbsd should relay through smtp.gmail.com mail -r someb...@hotmail.com miscATopenbsd should relay through

Re: Ansible network_cli module broke

2020-05-20 Thread Predrag Punosevac
John Doe wrote: > Installed the ansible pkg via pkg_add. I cannot get the ansible > network_cli > module to work in OpenBSD. Tried in version 6.6 and also 6.7 and both > hang > at "using connection plugin network_cli". It never times out, hangs here > forever. > > I copied my ansible

Re: openvpn setup tutorial

2020-05-20 Thread Predrag Punosevac
man Chan wrote: > Hello, > After a couple of days surfing the internet to get some notes to setup > the openvpn, I got lost as I don't know how to start the job. Can > anyone show me some pointer to study openvpn and setup step by step ? > What is an OpenBSD specific question/problem you are

Re: collectd graphs

2020-05-19 Thread Predrag Punosevac
Levai, Daniel wrote: > Hi everyone! > > I noticed facette became broken in 6.7. Do you guys use any neat tool to > graph collectd RRDs? Preferably in ports or at most something > git-pullable but with no outside deps (relative to base or ports). > > Thanks for the input! > > Dani Hi Dani,

Re: yubikey: user failed: password too short.

2020-02-16 Thread Predrag Punosevac
Just for the Internet archive. After using Quick option yubikey-personalization-gui and writing configuration into slot 2 I was able to use yubikey to log into 6.6 stable. I think that my problem was flaky USB slot and making sure pressing capacitive 'button' on the Yubikey correct length of time.

Smartphone Alternatives

2020-02-16 Thread Predrag Punosevac
the choice of mobile device for basic phone calls and texting. It would be painful to carry around a small laptop for web browsing, maps, and few other useful things but it looks like I am heading there. Thanks for your help. Predrag Punosevac

yubikey: user failed: password too short.

2020-02-15 Thread Predrag Punosevac
. No avail. Then I realized that 010: SECURITY FIX: December 4, 2019 All architectures libc's authentication layer performed insufficient username validation. Is it possible to use yubikey for console authentication or does above patch disables it completely? Most Kind Regards, Predrag

Re: strange dmesg

2020-02-08 Thread Predrag Punosevac
Justin Noor wrote: > I have the same output on a Protecli firewall device (it's not in > production yet) running 6.6 stable, and have yet to figure out what it > is. > I'm planning to spend some time on it next week. It's a brand new device > and there were no errors during installation. > >

Re: OpenBSD's extremely poor network/disk performance

2020-01-09 Thread Predrag Punosevac
On Thu, Jan 9, 2020 at 3:25 PM Hamd wrote: > Joe, are you a joke? Please stop insulting me, this is not > my/your_personal_fancy_forum. > > This will be my last post here in misc. > > Default setups, no config. changes. > Just patches installed. > Same hardware. > > FreeBSD: > freebsd@test:~ #

Re: Ubiquiti EdgeRouter 4 U-Boot md5sum

2019-12-24 Thread Predrag Punosevac
Predrag Punosevac wrote: > Just want to document in the case people are searching for this. OpenBSD > 6.6 has no problems booting of the USB and running on Ubiquiti > EdgeRouter 4 (tested only USB installation as I didn't want to nuke 4GB > eMMC flash storage). However, in spi

Ubiquiti EdgeRouter 4 U-Boot md5sum

2019-12-23 Thread Predrag Punosevac
Just want to document in the case people are searching for this. OpenBSD 6.6 has no problems booting of the USB and running on Ubiquiti EdgeRouter 4 (tested only USB installation as I didn't want to nuke 4GB eMMC flash storage). However, in spite of having check_md5sum=no option in U-Boot env,

Re: Following patch or stable branch on Octeon

2019-12-21 Thread Predrag Punosevac
On 2019-12-21, Stuart Henderson wrote: > On 2019-12-21, Predrag Punosevac wrote: > > I run bunch of EdgeRouter Lite in production and I just scored > > EdgeRouter 4. I was wondering what people do to keep their ER machines > > patched or even possibly following stabl

Following patch or stable branch on Octeon

2019-12-20 Thread Predrag Punosevac
Hi Misc, I run bunch of EdgeRouter Lite in production and I just scored EdgeRouter 4. I was wondering what people do to keep their ER machines patched or even possibly following stable? Shamefully I have to admit that up until now I just run release on ER Lite as it is only used as a simple

Re: Home NAS

2019-11-17 Thread Predrag Punosevac
Milun Rajkovic wrote: > Pardon my ignorance and lack of deeper knowledge regarding the matter, > but since when is XFS not even considered for such uses? > Since 2005 if you are Solaris guy. Since 2008 if you are ZFS on FreeBSD or Hammer 1 DragonFly guy. XFS is indeed the most stable and

Re: Home NAS

2019-11-17 Thread Predrag Punosevac
Patrick Marchand wrote: > Hello, > > On 11/15, Predrag Punosevac wrote: > > Patrick Marchand wrote: > > > I'll be playing around with DragonflyBSD Hammer2 (and multiple offsite > > > backups) for a home NAS over the next few weeks. I'll probably do a > &

Re: Home NAS

2019-11-16 Thread Predrag Punosevac
Paolo Aglialoro wrote: > A fundamental element missing from the 1st mail is on which hardware should > run your software-defined NAS and for which use. > > I exclude you are talking about several nodes, on which you can run Ceph or > GlusterFS filesystems. > "Ceph & Gluster are WILDLY

Re: Home NAS

2019-11-15 Thread Predrag Punosevac
j/usr/objnullrw 0 0 /pfs/var.crash /var/crash nullrw 0 0 /pfs/var.tmp/var/tmpnullrw 0 0 proc/proc procfs rw 0 0 # Added by Predrag Punosevac /dev/serno/

Re: Is there an easier way to browse ports?

2019-11-07 Thread Predrag Punosevac
On Thu, Nov 07, 2019 at 08:03:54AM -0600, Adam Thompson wrote: > Oh, ok... Do you recall an example offhand? (I haven't noticed systemic > problems with either, but then I'm hardly a ports expert!) > Thanks, > -Adam Hi Adam, Here is a quick example for you

Re: Tools for writers

2019-11-02 Thread Predrag Punosevac
On 2019-11-02 11:00, Oliver Leaver-Smith wrote: > Hello, > > What tools do people find useful for writing on OpenBSD? By writing I > mean long form such as novels and technical books, including plot and > character development, outlining, and formatting for publishing (not all > the same

Re: LDAP tls: handshake failure

2019-11-01 Thread Predrag Punosevac
Martijn van Duren wrote: > On 10/24/19 2:25 PM, Claudio Jeker wrote: > > > > OK claudio@ > > > I'll commit this soon-ish based on claudio's OK, but if at all > possible I would like to ask the people affected by this to test this > and see if this solves their problem. I did this on the pair

Re: LDAP tls: handshake failure

2019-10-23 Thread Predrag Punosevac
Kapetanakis Giannis wrote: > On 23/10/2019 19:14, Predrag Punosevac wrote: > > Hi Misc, > > > > I just upgraded a LDAP server from 6.5 to 6.6 running authorization and > > authentication services for a 100 some member university research group. > > It appears TLS

LDAP tls: handshake failure

2019-10-23 Thread Predrag Punosevac
N 3.3 I didn't change DNS settings and I even have titan# more /etc/hosts 127.0.0.1 localhost ::1 localhost 192.168.6.1 titan.int.autonlab.org titan I would appreciate any clues. Cheers, Predrag Punosevac

Re: experience with supermicro based Network Devices for 1Gb/s Ipsec throughput

2019-10-01 Thread Predrag Punosevac
On 2019-10-01, Lyndon Nerenberg wrote: > Hello All, > > doing a project for a large client and I would like to know if anyone > has > any issues running. > supermicro with SOC CPUS models > SYS-5019A-FTN4 > SYS-5018A-FTN4 As reported previosly by others make sure you have a good warranty as

Re: wrong memory stats with collectd

2019-09-25 Thread Predrag Punosevac
Hi, I think I can confirm what you see on the bare metal system running 6.5 with 16GB of RAM. I use Observium to display statistics from all my servers including dozen or so OpenBSD servers. I see that the numbers recovered by SNMP walk from OpenBSD servers are consistent with vmstat numbers.

Re: Kerberos SSH routing tables problem

2019-09-05 Thread Predrag Punosevac
On 2019-08-02, Stuart Henderson wrote: > On 2019-07-29, Predrag Punosevac wrote: > > Hi Misc, > > > > I am using Edgerouter lite as a firewall/DNS cashing resolver for one of > > our remote location > > > > ubnt1# uname -mrsv > > OpenBSD 6.5 GE

Kerberos SSH routing tables problem

2019-07-29 Thread Predrag Punosevac
t. Could somebody give me a head start how to go about further trouble shooting and fixing the problem? Obviously flashing states is not very convenient. Most Kind Regards, Predrag Punosevac

SSH config file rdist

2019-07-25 Thread Predrag Punosevac
calling ssh. I don't see anything in log files. Is there anything I can do short of reading rdist code to understand how to force rdist to read a ssh config file. I am guessing I could play with /etc/ssh/* files on the local and destination hosts. Most Kind Regards, Predrag Punosevac

syspatch Octeon and arm64 alternatives

2019-07-17 Thread Predrag Punosevac
Hi Misc, Are there any plans to build syspathes for Octeon platform in the future? Octeon platform has matured nicely since the introduction in 2013 and is becoming my goto platform for SOHO environments. Apart of the lack of hardware clocks the main nuisance is the lack of binary patches. I

Hackathon Report: Eric Faurot on e-mail and printing

2019-07-17 Thread Predrag Punosevac
Regards, Predrag Punosevac

Re: OpenBSD runs only in RAM from a USB Flash Drive

2019-05-30 Thread Predrag Punosevac
> 30 May, 2019 > > Greetings OpenBSD aficionados, > > As a newbie to OpenBSD, I am delighted to have the chance to interact > with the OpenBSD Mailing Lists community. > Since I am about to install OpenBSD 6.5 (amd64) on a USB Flash Drive for > > the first time, I was wondering if anyone has a

Re: ix0: CRITICAL: EXTERNAL PHY OVER TEMP!!

2019-05-15 Thread Predrag Punosevac
Stuart Henderson wrote: > On 2019-05-15, Predrag Punosevac wrote: > > Hi, > > > > I am having an issue with a single 10 Gigabit interface on one of > Intel > > Xeon D-1541 network servers. Namely after the reboot the interface > > appears to be down eve

ix0: CRITICAL: EXTERNAL PHY OVER TEMP!!

2019-05-14 Thread Predrag Punosevac
Hi, I am having an issue with a single 10 Gigabit interface on one of Intel Xeon D-1541 network servers. Namely after the reboot the interface appears to be down even with a static route phobos# ifconfig ix0 ix0: flags=8843 mtu 1500 lladdr ac:1f:6b:19:f7:72 index 1 priority 0

Re: Upgrade procedure (6.4 -> 6.5)

2019-05-03 Thread Predrag Punosevac
Strahil Nikolov wrote: > > On May 3, 2019 10:49:55 PM GMT+03:00, Nick Holland > \ > wrote: > > On 5/2/19 1:52 AM, Consus wrote: > > > Hi, > > > > > > I've upgraded my systems from 6.4 to 6.5 without a glitch, but I see > > > that /etc/networks and some other files (like malloc.conf.5) are > >

Re: [6.5] Cups + Gutenprint: file rastertogutenprint not found

2019-04-28 Thread Predrag Punosevac
Stephane HUC wrote: > > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA512 > > Hi, (just FYI) > > After upgrading OpenBSD from 6.4 to 6.5, I had this problem to print. > The Webadmin of Cups informs me with this message: > > "/usr/local/libexec/cups/filter/rastertogutenprint.5.2 not found!" >

Re: Laser printer setup help (and/or recommendation)

2019-04-15 Thread Predrag Punosevac
> Moises Simon wrote: > > Hi, I need some help to setup or buy new printer. > > I have been trying to make a Brother DCP-L2530DW working on OpenBSD. > A quick look into "Open" Printing https://www.openprinting.org/printers doesn't show any info on the device you have. However, DCP-L2540DW,

Re: Are there open source firewall distributions which are built on top of OpenBSD?

2019-03-12 Thread Predrag Punosevac
Turritopsis Dohrnii Teo En Ming wrote on Tue, Mar 12, 2019 at 02:31:47PM +: > Are there open source firewall distributions which are built on top > of OpenBSD, https://securityrouter.org/wiki/Main_Page Once upon a time there was a ComixWall

demystifying trap

2019-01-12 Thread Predrag Punosevac
Could one of peple with some rudimental knowledge of kernel interals tell me what am I seeing here Jan 12 13:42:37 oko /bsd: trap [mmonit-bin]89524/427284 type 6: sp 122488ae75d0 not inside 7f7fffbf4000-7f7f4000 I was trying to run MMonit binaries on my desktop.

Re: SSH server immediately closes connection

2018-12-14 Thread Predrag Punosevac
On 12/14/18 00:27, wrote: > Hello, > I've got a PC running OpenBSD current. > After the latest upgrade I cannot ssh to it. > > When I run "ssh 10.26.5.70" > I get this: > "Connection to 10.26.5.70 closed by remote host. > Connection to 10.26.5.70 closed." > As an SSH

OT: OpenBSD NFS Performance

2018-11-17 Thread Predrag Punosevac
Jordan Geoghegan wrote: > On 11/17/18 10:53, Predrag Punosevac wrote: > > On Sat, Nov 17, 2018 at 01:35:05AM +0100, Willi Rauffer wrote: > > > >> Hello, > >> > >> we want to make one logical volume out of several physical volumes, > but there is no \

Re: Missing LVM (Logical Volume Manager)

2018-11-17 Thread Predrag Punosevac
On Sat, Nov 17, 2018 at 01:35:05AM +0100, Willi Rauffer wrote: > Hello, > > we want to make one logical volume out of several physical volumes, but there > is no \ > LVM (Logical Volume Manager) in OpenBSD! > Will there be a LVM in OpenBSD in the future? > > Thanks...Willi Rauffer,

Few ldapd questions

2018-11-08 Thread Predrag Punosevac
Hi Misc, I have been using ldapd for the past five years for centralized user authorization and authentication for a growing university research group. Secured connections are provided using STARTTLS even thought all queries are done on the private network. More recently I did some more reading

Re: unbound-checkconf "Killed" on openbsd 6.4 amd64 when loading large local cache

2018-10-24 Thread Predrag Punosevac
Tom Smyth wrote: > Hello all, > unbound-checkconf "Killed" when cheking a large local zone config file > rcctl start unbound fails because of the above command failing > > background > > we were migrating our dns filtering from one platform to openbsd > so we have a basic unbound configuration

Re: Cloud-Storage & OpenBSD

2018-09-02 Thread Predrag Punosevac
> On Sep 2, 2018, at 10:43 AM, Kurtis wrote: > > Hey all, > > I'm just wondering if anyone has any suggestions with any Online File > Backup Synchronization services? > > I used Dropbox for a long time but decided to drop it in favor of > pCloud. It's about time to do another annual

Re: Best way to serve files to Windows?

2018-07-25 Thread Predrag Punosevac
John Long writes: > Hi, > > I have minidlna working fine on OpenBSD. However this doens't help with > Roon media software since they don't have anything for OpenBSD, > unsurprisingly. Roon doesn't want to support dlna. > > I have my Windows foobar2000 appliance roped-off from my LAN because I >

Re: Julia on OpenBSD?

2018-07-13 Thread Predrag Punosevac
On July 13 2018 Rudolf Sykora wrote: > Hello, > > has anyone any experience with running Julia (language) > on OpenBSD? How difficult was it to set it up? (It isn't > in the Ports.) > > As somebody already pointed out bcallah@ was looking more into it but last time I looked (1-2 years ago) it

Re: nvi and unicode

2018-07-13 Thread Predrag Punosevac
On July 13 2018 Thuban wrote: > > Default vi (nvi) in OpenBSD doesn't handle correctly most of UTF-8 > sings such as "", "?? " or so. One need to install > nvi package to do so. > Is it planned to replace the vi binary in the future? > Is there any reason I can't think to keep this vi

arm64 recommendation Pine64 or Rock64

2018-07-07 Thread Predrag Punosevac
Hi Misc, I am soliciting opinions about the arm64 board which I would like to buy for a project. I am debating between Pine64 Pine 64 which has Allwinner A64/H5 processor https://www.pine64.org/?product=pine-a64-lts or much newer model Pine64 Rock64 with Rockchip RK3328 processor

Automounting with amd

2018-06-26 Thread Predrag Punosevac
Hi misc, I have a question about amd daemon. I recently rebuilt the main file server for our university lab and decided to use separate ZFS datasets for user home directories. Our main file server runs 11.1-RELEASE-p11. That creates a bit of a problem as each home directory has to be a separate

Logging to Elasticsearch with syslog-ng

2018-05-31 Thread Predrag Punosevac
Hi Misc, I am revisiting the idea of storing log files in Elasticsearch DB for quick search, analytics, and visualization (Kibana). I would like to keep my current OpenBSD syslog-ng centralized logging server and just write logs into ElasticsearchDB instead of flat files. Looks like

ed viewing trailing spaces

2018-05-23 Thread Predrag Punosevac
Hi Misc, I just got Michael Lucas' Ed Mastery. While reading through the book I tried few things and I realized that viewing trailing spaces on OpenBSD 6.3 doesn't work the way described in man pages, Michael's book, and other OSs (I tired Red Hat 7.5, FreeBSD 11.1p10, DFBSD 5.2.1) Namely

New lpd server

2018-05-10 Thread Predrag Punosevac
Where can I learn more about the work on the new lpd server aside of reading the code? I learnt about it from the OpenBSD Journal https://undeadly.org/cgi?action=article;sid=20180509184829 Thank you! Predrag

CVE-2018-8897

2018-05-10 Thread Predrag Punosevac
Does this https://cve.mitre.org/cgi-bin/cvename.cgi?name=3DCVE-2018-8897 affect 6.3 stable? Best, Predrag

SMTP client added to -current

2018-05-10 Thread Predrag Punosevac
Recently I an interesting article on OpenBSD Journal https://undeadly.org/cgi?action=article;sid=20180427124425 I had a question which is not addressed by man pages https://man.openbsd.org/smtp.1 but I guess Eric and other developer familiar with code were busy hacking new cool things. I was

Re: 4-ports router under $150

2018-04-09 Thread Predrag Punosevac
On 04/07/18 14:59, Anatoli wrote: > Hi All! > > I'm looking for a modest 4-5 ports router under $150 that works well > with OpenBSD. I don't need WiFi, USB or console port, and the > throughput don't need to exceed 100Mbps. The ideal device would be > EdgeRouter X (compact, 5 ports, $50) but I

Re: is there foomatic-rip for lpd on openBSD 6.3?

2018-04-09 Thread Predrag Punosevac
On Mon, Apr 09, 2018 at 04:52:36PM +0200, Rudolf Sykora wrote: > > Hello, > > > > I want to print from openBSD 6.3. I tried to use lpd and found > > some information on the web about setting up /etc/printcap. Around here we actually read man pages and pkg-readmes predrag@oko$ uname -a OpenBSD

Re: Relinking unique kernel failed after syspatch

2018-03-19 Thread Predrag Punosevac
Leo Unglaub wrote: > Hello, > today I wanted to apply the latest patches on our servers. They all > worked fine, only on one server where i was missing some previous > patches as well it got an error from syspatch. > > > # syspatch > > > Get/Verify syspatch62-005_ahopts.tgz 100% \ > >

Re: pfstat and queueing

2018-02-15 Thread Predrag Punosevac
Stuart Henderson wrote: > It can already be monitored to some extent, base snmpd does already > support a number of things in OPENBSD-PF-MIB, but not queues yet. Any chance that you share with us how you plot the data you recover with snmpwalk from those MIBs. I would be most interested in

Re: acme-client No registration exists matching provided key

2018-02-01 Thread Predrag Punosevac
ordan Thank you so much for this prompt replay. I already signed certificate using certbot as we were hitting deadline. However, this is going to be very useful going forward with renewals. Best, Predrag > > > > > On 02/01/18 17:16, Predrag Punosevac wrote: > > Hi Misc

acme-client No registration exists matching provided key

2018-02-01 Thread Predrag Punosevac
Hi Misc, I have done this half dozen times in the past but I am having helluva time using acme-client to sign certificate for a domain. Any clues? Please see below machine, acme-client.conf and httpd.conf files # uname -a OpenBSD mcba.autonlab.org 6.2 GENERIC.MP#2 amd64 # more

Re: Flatbed scanner that works well with OpenBSD?

2018-01-19 Thread Predrag Punosevac
Bryan Linton writes: > Hello misc@ > > I'm currently looking to purchase a scanner that works well with OpenBSD. > > I'm aware of the list provided at: > > 0211038.pdf Desktop Documents Downloads Library Movies Music Pictures > Programs Videos

Re: syspatch not updating kernel

2017-12-13 Thread Predrag Punosevac
Steven Surdock wrote: > I just ran syspatch on a 6.2/i386 host and the kernel did not change as > it = > has on my other patched machines. It appears that > pub/OpenBSD/syspatch/6.2= > was updated on 12/10. > > root@rad03 [/root]# syspatch -l > 002_fktrace > 003_mpls > root@rad03 [/root]#

Re: Relinking to create unique kernel... failed!

2017-12-04 Thread Predrag Punosevac
Predrag Punosevac wrote: > > # uname -a > OpenBSD oko.bagdala2.net 6.2 GENERIC.MP#0 amd64 > > # syspatch > Get/Verify syspatch62-002_fktrace... 100% |*| 785 KB00:01 > > Installing patch 002_fktrace > Relinking to create unique kernel... fail

Relinking to create unique kernel... failed!

2017-12-04 Thread Predrag Punosevac
# uname -a OpenBSD oko.bagdala2.net 6.2 GENERIC.MP#0 amd64 # syspatch Get/Verify syspatch62-002_fktrace... 100% |*| 785 KB00:01 Installing patch 002_fktrace Relinking to create unique kernel... failed! Any hints where should I look for the reason relinking is failing?

motion detection video surveillance

2017-11-05 Thread Predrag Punosevac
Hi Misc, Is anybody willing to share her/his experience in building motion detection video surveillance system using OpenBSD? I see at least one interesting port http://openports.se/multimedia/motion but I am really curious about the type of video hardware people are using. Thank you all.

error: [drm:pid81687:intel_pipe_update_start]

2017-11-04 Thread Predrag Punosevac
I just notice on xconsole of my ThinkPad X201 error: [drm:pid81687:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A Has anybody else seen this on 6.2 stable? predrag@oko-mobile$ uname -a OpenBSD oko-mobile.bagdala2.net 6.2 GENERIC.MP#0 amd64 OpenBSD 6.2

Re: Apollo Lake kernel panic

2017-11-04 Thread Predrag Punosevac
I copied the bsd.mp kernel from a working machine. Here is the dmesg. I also disabled C states in BIOS and was able cleanly to halt machine OpenBSD 6.2 (GENERIC) #132: Tue Oct 3 21:18:21 MDT 2017 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 16799846400

Re: Apollo Lake kernel panic

2017-11-03 Thread Predrag Punosevac
I was able to boot machine which crashed with bsd.sp kernel. Please see message below. That kernel is non-patched kernel as I was running normally bsd.mp kernel. Also I forgot to say in my previous message that I didn't mess with C states (BIOS option). I was also using legacy (not pure UEFI boot)

Re: Apollo Lake kernel panic

2017-11-03 Thread Predrag Punosevac
Pedro Ramos wrote: > Please find attached the dmesg from ASRock J4205-ITX. > > > Best regards, > Pedro Ramos > > > ["asrock.j4205-itx.dmesg.gz" (application/x-gzip)] Unfortunatelly I got one of those few weeks ago and it is nothing but the trouble. The first one died but NewEgg sent me the

Re: atascsi_passthru_done, timeout

2017-10-20 Thread Predrag Punosevac
Predrag Punosevac wrote: > On Tue, Jun 27, 2017 at 2:19 PM, Jan Stary <h...@stare.cz> wrote: > > This is current/amd64 (dmesg below). > > After installing smartmontools and running > > /usr/local/sbin/smartctl -t short /dev/sd0c > > in rc.local I get a log

Re: atascsi_passthru_done, timeout

2017-10-18 Thread Predrag Punosevac
On Tue, Jun 27, 2017 at 2:19 PM, Jan Stary wrote: > This is current/amd64 (dmesg below). > After installing smartmontools and running > /usr/local/sbin/smartctl -t short /dev/sd0c > in rc.local I get a log of > > atascsi_passthru_done, timeout > > in /var/log/messages. Is this

Re: bioctl and S.M.A.R.T support for physical disks

2017-10-18 Thread Predrag Punosevac
smartctl -i /dev/sd0c works for me as well. I would like to thank all of you who helped on and off the list. Predrag

  1   2   3   4   5   >