Hi, i've got a problem with my hw.sensors output.
TEMP1 is not shown when calling sysctl hw.sensors. If I combine the command with 'openssl speed' it shows the temperature. That's on a snap from 12/02. The Machine is a Via EPIA M10000. Setting the flags for viasio as shown in the manpage doesn't change the behavior. Bad hardware? (new board, didn't run openbsd on it before, so i dont know if it ever worked.) /sable --- # sysctl hw.sensors hw.sensors.1=viasio0, UCH1, volts_dc, 3.31 V hw.sensors.2=viasio0, UCH2, volts_dc, 2.42 V hw.sensors.3=viasio0, UCH3, volts_dc, 2.37 V hw.sensors.4=viasio0, UCH4, volts_dc, 4.61 V hw.sensors.5=viasio0, UCH5, volts_dc, 12.20 V hw.sensors.6=viasio0, +3.3V, volts_dc, 3.23 V # openssl speed && sysctl hw.sensors [... openssl output ...] hw.sensors.0=viasio0, TEMP1, temp, 33.43 degC / 92.17 degF hw.sensors.1=viasio0, UCH1, volts_dc, 3.31 V hw.sensors.2=viasio0, UCH2, volts_dc, 2.38 V hw.sensors.3=viasio0, UCH3, volts_dc, 2.37 V hw.sensors.4=viasio0, UCH4, volts_dc, 4.58 V hw.sensors.5=viasio0, UCH5, volts_dc, 12.14 V hw.sensors.6=viasio0, +3.3V, volts_dc, 3.23 V # cat /var/run/dmesg.boot OpenBSD 3.9-beta (GENERIC) #601: Sun Feb 12 21:39:52 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA Nehemiah ("CentaurHauls" 686-class) 1 GHz cpu0: FPU,DE,PSE,TSC,MSR,MTRR,PGE,CMOV,MMX,FXSR,SSE cpu0: RNG real mem = 234397696 (228904K) avail mem = 206901248 (202052K) using 2886 buffers containing 11821056 bytes (11544K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(68) BIOS, date 12/11/03, BIOS32 rev. 0 @ 0xfb210 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf44 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/112 (5 entries) pcibios0: PCI Exclusive IRQs: 5 10 11 pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8235 ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xfa00 0xd0000/0x8000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at 0xe0000000, size 0x10000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "VIA VT6306 FireWire" rev 0x80 at pci0 dev 13 function 0 not configured uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00 iic0 at viapm0 pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4032GAX> wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10 ac97: codec id 0x49434552 (ICEnsemble VIA VT1616i) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D audio0 at auvia0 vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address 00:40:63:d4:12:12 ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI 0x004063, model 0x0032 isa0 at mainbus0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02: HM WDG: not activated npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo biomask ef65 netmask ef65 ttymask ffe7 pctr: user-level cycle counter enabled dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 -- Telefonieren Sie schon oder sparen Sie noch? NEU: GMX Phone_Flat http://www.gmx.net/de/go/telefonie