Hi
have you tried the diff by yourself ?
i cant remember.
someone else was working on that at the same time bck then, if i
remember
correctly.
But it might still work.
If it does, report back, i might pick the topic up again.
I patched it yesterday night and it seems work. i have an
Hi Benno,
have you tried the diff by yourself ?
Thanks
Thomas
Am 2018-12-06 21:14, schrieb Sebastian Benoit:
Thomas Boernert(m...@tbits.net) on 2018.12.06 18:11:17 +0100:
Hi,
i found this old thread and i have the same problem. i need an active
timeout of the netflow data.
i found
Hi,
i found this old thread and i have the same problem. i need an active
timeout of the netflow data.
i found this patch
http://marc.info/?l=openbsd-misc=124661838923498=2
which i can set the "set timeout pflowexport 60" for example
Have anyone tried that ?
Sebastian Benoit wrote:
however
Hi,
an update:
it seems thats a memory pool problem.
on the same machine its running bgpd with 2 uplinks.
if i stop on the backup machine the bgpd and then start the snmpd, than
i have only ~ 4000 page faults.
i have 8 GB memory, my ulimit:
time(cpu-seconds)unlimited
file(blocks)
Hi List,
i've a default snmpd.conf. When i starting snmpd then the page fault
jumps to 38000:
procsmemory pagediskstraps
cpu
r b wavm fre flt re pi po fr sr sd0 sd1 int sys cs
us sy id
1 1 0 575124 60937927 0 0 0 0
Hi Robert,
i have the same problem:
ospfd[94311]: desync; scheduling fib reload
ospfd[94311]: reloading interface list and routing table
Have you a fix for your problem ?
i have my mbuf extended to 32768 with no success.
i have bgpd and ospfd on the same machine and ospfs loads the complete
Dear List,
with ipv4 it works fine:
bgpctl network add ipv4-address/32 community 1:0
but with ipv6 it won't work:
# bgpctl network add ipv6-address/128 community 1:0
request sent.
=> but no update will be send to the neighbor, checked with
tcpdump too, no packet will be send.
#
7 matches
Mail list logo
