Re: OpenBSD -current on T495

Could you please provide a dmesg output? The info you gave is not very helpful without it. -- Tony GPG-FP: 49CC8250 CDCF2183 6209C1AE 625677C1 F7783D5F Threema: DN8PJX4Z > On 9. Nov 2019, at 12:08, Thomas de Grivel wrote: > > Everything works except wifi, suspend/resume a

Re: Question regarding wi-fi card support

in ieee80211(9) before those features can be supported. just so you know I stumbled upon this when I installed OpenBSD on a few thinkpads with those chips built-in and was wondering why I couldn’t connect to my 2nd home network -- Tony GPG-FP: 49CC8250 CDCF2183 6209C1AE 625677C1 F7783D5F Threema

Re: Apache 2.4 not running php OpenBSD 6.4

is but you don’t seem to even know that this would be the first start to solving problems.. -- Tony GPG-FP: 49CC8250 CDCF2183 6209C1AE 625677C1 F7783D5F Threema: DN8PJX4Z > On 11. Jul 2019, at 08:40, mansoor wrote: > > Hi, > I hope you guys are doing great. > > I am using O

Re: Packet loss with latest snapshot

On Mon, 4 Mar 2019, 13:29 David Gwynne, wrote: > On Mon, Mar 04, 2019 at 10:36:23AM +0100, Tony Sarendal wrote: > > On Mon, 4 Mar 2019, 09:43 Tony Sarendal, wrote: > > > > > > > > > > > Den m??n 4 mars 2019 kl 09:26 skrev Tony Sarendal : > > >

Re: Packet loss with latest snapshot

On Mon, 4 Mar 2019, 09:43 Tony Sarendal, wrote: > > > Den mån 4 mars 2019 kl 09:26 skrev Tony Sarendal : > >> Den sön 3 mars 2019 kl 21:35 skrev Theo de Raadt : >> >>> Tony, >>> >>> Are you out of your mind? You didn't provide even a rough hi

Re: Packet loss with latest snapshot

Den mån 4 mars 2019 kl 09:26 skrev Tony Sarendal : > Den sön 3 mars 2019 kl 21:35 skrev Theo de Raadt : > >> Tony, >> >> Are you out of your mind? You didn't provide even a rough hint about >> what your firewall configuration looks like. You recognize that's >&

Re: Packet loss with latest snapshot

Den sön 3 mars 2019 kl 21:35 skrev Theo de Raadt : > Tony, > > Are you out of your mind? You didn't provide even a rough hint about > what your firewall configuration looks like. You recognize that's > pathetic, right? > > > Earlier in the week I could run parallel pi

Packet loss with latest snapshot

Earlier in the week I could run parallel ping-pong tests through my test firewalls at 300kpps without any packet loss. I updated to the latest snapshot today and start to see packet loss at around 80kpps. /T OpenBSD 6.5-beta (GENERIC.MP) #764: Sun Mar 3 10:24:08 MST 2019

Re: Substitute mandoc for tlb command

> On 8. Feb 2019, at 16:22, Артур Истомин wrote: > > I need t command to accomplish example from "The AWK Programming Language" > book. > Is it possible somehow substitute it with mandoc? > > Thanks! > you are funny -- Tony GPG-FP: 49CC8250 CDCF2183

40G ixl nics

L710 QSFP+" rev 0x02: port 1, FW 5.0.40043 API 1.5, msi, address 0c:c4:7a:5e:f9:c9 ixl1: unable to query phy types NIC: https://www.supermicro.com/manuals/other/datasheet-AOC-S40G-i1Q_i2Q.pdf Any ideas ? Regards Tony OpenBSD 6.4-current (GENERIC.MP) #658: Fri Feb 1 02:25:34 MST 2019 dera.

Re: OpenBSD & OpenBGPD router replacement

You will likely run out of CPU before bandwidth. Even on nice hardware I have yet to exceed 1Mpps with OpenBSD. /T Den ons 19 dec. 2018 kl 03:12 skrev Max Clark : > Tom, > > The presentation was very interesting and it's given me a lot of food for > thought for another project. Fortunately for

Re: daily cron not starting

ound/etc/root.hints https://FTP.INTERNIC.NET/domain/named.cache && rcctl restart unbound @reboot echo "Reboot $(date)" On 11/13/2018 07:07 AM, Bruno Flueckiger wrote: > Is the cron(8) daemon running? yes > On Tue, 13 Nov 2018 at 05:49, Tony Bos

daily cron not starting

Hi misc@, the daily cron is not running anymore although I can execute '/bin/sh /etc/daily' by hand just fine. I don't see anything in the logs and I don't have any clue what else to check. Do you guys have any idea? -- Tony GPG-FP: 49CC8250 CDCF2183 6209C1AE 625677C1 F7783D5F Threema

Re: Reduced network performance since installing 6.4

Hola, Unrelated to wifi, I have seen a dramatic drop in forwarding performance in 6.4 and later. I run some basic performance tests to verify the releases before we deploy them. For the same test on the same hardware I have this: Release, pps snapshot, 340k 6.4, 340k 6.3, 450k 6.2, 430k 6.1,

Re: httpd rewiterules like apache

mann > Königsbrücker Str. 70, 01099 Dresden > > http://www.ghweb.de > fon: +49 351 8107220 fax: +49 351 8107227 > > Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before you > print it, think about your responsibility and commitment to the ENVIRONMENT

35C3 - Chaos Communication Congress 2018

up where I could take part? Any information or direct contact via email would be really appreciated. -- Tony GPG-FP: 49CC8250 CDCF2183 6209C1AE 625677C1 F7783D5F Threema: DN8PJX4Z

sympa and opensmtpd/httpd

Hi, has anyone running sympa with opensmtpd and httpd? I can not figure out how to configure slowcgi correctly in /etc/httpd.conf and if anybody is using this already, I'd really appreciate any hint or config-insight :) thanks Tony -- GPG-KEY: 0x5C5C239D81121B35 GPG-FP: 49CC8250 CDCF2183

Re: Monitoring system

I am using Icinga2 on all our machines - you'll find it in packages and the newest version you'll get with OpenBSD 6.4 On 10/05/18 05:09, Tom Smyth wrote: > Both of of the ones I emailed to you are in ports > > also there is pmmact by the Legend paulo Lucende > that can aggregate and convert

Re: Integration between CARP and BGPD ?

Or re-write next-hop to the carp address, so carp actually decides the master firewall. /T Den tors 13 sep. 2018 kl 00:20 skrev Tim Jones < b631093f-779b-4d67-9ffe-5f6d5b1d3...@protonmail.ch>: > > On Wednesday, 12 September 2018 20:49, Stuart Henderson < > s...@spacehopper.org> wrote: > > > On

Re: Vultr hosting of OpenBSD

openbsd current laptop involves sometimes using alpine linux on vmm an using > docker on that to spin up different things I want to check out. > > Ken > I am running a few instances at vultr - no problems at all with the images they have. -- Tony GPG-FP: 913BBD25 8DA503C7 BAE0C0B6 8995E906 4FBAD580 Threema: DN8PJX4Z

Re: Python flask socket with httpd problems

> > i also tried to have the python script manually create a > fast-cgi socket with the python library flup > ("https://pypi.python.org/pypi/flup/1.0.2;) > > > > Have anyone gotten a python flask application to work with httpd > as a reverse proxy with a fast-cgi

Re: stuck on spamd

pass in on egress inet proto tcp from any to (egress) port { 80 443 } > > pass inet proto tcp from { self, $localnet } > > pass quick inet proto tcp to port $tcp_services keep state > pass quick inet proto tcp to port $mail_services keep state > > pass quick inet proto udp

Re: Can SSH report successful connections to pf?

you be more specific here? -- Tony GPG-FP: 913BBD25 8DA503C7 BAE0C0B6 8995E906 4FBAD580 signature.asc Description: OpenPGP digital signature

Re: mail sign/encrypt

on what machine you're running on or if you want to go for CLI only just my 2 cents -- Tony GPG-FP: 913BBD25 8DA503C7 BAE0C0B6 8995E906 4FBAD580 signature.asc Description: OpenPGP digital signature

Re: pkg using "6.3" instead of "snapshots"

> It's the point in time where -current is in release mode (after being > -beta for a while) to prepare for the next release. Ahh there we go, I guess I just missed that timeframe last time. Thanks for explaining -- Tony GPG-FP: 913BBD25 8DA503C7 BAE0C0B6 8995E906 4FBAD580 signatu

Re: pkg using "6.3" instead of "snapshots"

I have to add that I know I would use -Dsnap as a flag. It's just that I didn't need to in the past. That's why I was wondering if something has changed here On 03/24/18 08:21, Tony Boston wrote: > Hello list, > > am using -current on my x230 for a while now which was working okay >

pkg using "6.3" instead of "snapshots"

t;6.3" when I try to update packages or install new ones. Is there a switch I have to set? I didn't need to do anything like that before. Cheers -- Tony GPG-FP: 913BBD25 8DA503C7 BAE0C0B6 8995E906 4FBAD580 signature.asc Description: OpenPGP digital signature

Re: testing cabling and NIC hardware with one machine

Configure the interfaces into separate rdomains. /T 2017-10-25 21:17 GMT+02:00 Christopher Paul : > Hi Misc, > > I have been tasked with setting up a benchmark platform to test NICs and > network cables. I'd like to do this on one PC. So I want to send packets of >

ftp.eu.openbsd.org

Not looking so good. tonsar@jump0.swe1$ ftp ftp.eu.openbsd.org Trying 193.156.26.18... Connected to ftp.eu.openbsd.org (193.156.26.18). 220 jj-prod-obsdmirror.inet6.se FTP server ready. Name (ftp.eu.openbsd.org:tonsar): ftp 331 Guest login ok, send your email address as password. Password: 230

Re: sendsyslog error 55

one syslog message per >mail body line, and I saw the "error 55" messages when large mails >arrived. After only this change, I don't see them anymore. Sorry it >took >so long to trace. > >Daniel Hey there Daniel, thanks for your response. Really appreciated. I'll check that with my boxes -- Tony

Re: fd0 at fdc0 drive 0: density unknown

> The old behavior was that the kernel would wait after the "fdc0 ..." line > until fd0 attaches. Now it does the waiting in the background and continues > booting. I agree that it's a bit ugly, but it makes booting about 5 seconds > faster. It's not just a bit ugly... It's horrible. It has to

Re: sendsyslog error 55

> > Are you using the standard syslogd? > yup -- Tony signature.asc Description: OpenPGP digital signature

Re: sendsyslog error 55

Am 12.08.2017 um 08:37 schrieb Mike Burns: > On 2017-08-12 07.58.01 +0200, Tony Boston wrote: >> Aug 12 07:49:03 srv01 sendsyslog: dropped 2 messages, error 55 >> >> 1. how can I figure out what is generating all those messages and fix it >> (thats what logs are for) >

sendsyslog error 55

figure out what is generating all those messages and fix it (thats what logs are for) 2. Is there a built in function to somehow get warned about those errors right away or would one just check syslog on a regular basis Thanks -- Tony signature.asc Description: OpenPGP digital signature

Re: maximum number of interfaces

Back in 2007 I tested with 4k VLAN interfaces, it wasn't fast, but it worked. /T 2017-04-03 5:46 GMT+02:00 Nick Holland : > On 04/02/17 22:08, Edgar Pettijohn wrote: > > Is there a maximum number of network interfaces that can be configured? > > I looked around in

USB and Intel Bay Trail

Hola, I got a pair of mini-pc's to play with for the summer vacation, small fanless thingies with 4xGE and wifi. http://www.qotom.net/goods-129-QOTOM-Q190G4+4+LAN+Mini+PC.html When testing with the latest snapshot USB wont play. Any ideas ? Regards Tony # dmesg OpenBSD 6.0-beta (GENERIC.MP

lots of states (5.8)

Hola amigos, I'm doing some testing in the lab at the moment and just though I'd share. pf0.swe69# pfctl -si | grep current current entries 50239413 pf0.swe69# vmstat -m | tail -n 1 In use 22035659K, total allocated 5678936K; utilization 388.0% pf0.swe69# 4 tcpbench sessions

Re: bgpd network connected

2016-03-08 15:38 GMT+01:00 Matt Schwartz <matt.schwart...@gmail.com>: > I did not even know it was broken? > > On Mar 8, 2016 1:26 AM, "Tony Sarendal" wrote: > > > > Is there any chance of getting "network inet connected" fixed to 5.9 ? > > >

bgpd network connected

Is there any chance of getting "network inet connected" fixed to 5.9 ? Regards Tony

Re: openbgpd puts wrong nexthop in FIB

2016-01-21 11:16 GMT+01:00 Stuart Henderson <s...@spacehopper.org>: > On 2016-01-20, Tony Sarendal <t...@polarcap.org> wrote: > > network inet connected is broken in 5.6, 5.8 and -current. > > Restarting bgpd is required when making interface changes. > > Ah,

Re: openbgpd puts wrong nexthop in FIB

network inet connected is broken in 5.6, 5.8 and -current. Restarting bgpd is required when making interface changes. /T 2016-01-20 20:36 GMT+01:00 Denis Fondras : > Hello, > > I'm using -current as a BGP router and "sometimes" it won't put the right > nexthop in FIB. The

5.8 bgpd, network connected behaves like 5.6

"network inet connected" does not pick up new vlan interfaces, same problem as 5.6. bmr0.esp1# ifconfig vlan69 create bmr0.esp1# ifconfig vlan69 vlandev trunk0 vlan 69 up bmr0.esp1# ifconfig vlan69 1.1.1.1/30 bmr0.esp1# bgpctl show rib 1.1.1.1 flags: * = Valid, > = Selected, I = via IBGP, A =

Re: 5.8 bgpd, network connected behaves like 5.6

2015-12-17 10:29 GMT+01:00 Peter Hessler : > 1) does "bgpctl reload" detect it? > > 2) does -current work as you expect? > > > 1. bgpctl reload does not make any difference. 2. A quick test on my -current workstation (not the same hardware, no trunk) also fails to work.

Re: Donation request for Network SMP development

How is this going ? /T On Fri, Mar 20, 2015 at 8:57 PM, Martin Pieuchot m...@openbsd.org wrote: If you've been following my contributions to OpenBSD's kernel, you already know that in the past years I've been working on the Network Stack [1] to make it more SMP friendly [2]. All the

bgpd.conf macros on 5.5 and up

} ugly = { 127.0.0.1/8, 169.254.0.0/16 } bgpd.conf-2:6: syntax error tonsar@obc1$ Regards Tony

Re: 5.6 arrived

Harald Dunkel wrote Hopefully you agree that the file name snapshots/amd64/install56.iso is misleading? Looking at the file name I had assumed/hoped there is some kind of upgrade path from the install56.iso snapshot to the 5.6 release. Who is being misled? (from an outsider) The overriding

Re: openbsdstore: enable javascript and buy something or gtfo

Matti Karnaattu wrote snip How I can have you to be more relaxed? With beer? Just what I need. Life support on drunk programs writ by drunk programmers. Please. You are a threat to my continued existence.

4k graphics and openbsd

black. What I want is a stable work environment where I can reboot my workstation every 6 months or so. This with a 4k screen. Doable ? Cheers /Tony

Re: 4k graphics and openbsd

On Fri, Sep 19, 2014 at 6:07 PM, Jonathan Gray j...@jsg.id.au wrote: On Fri, Sep 19, 2014 at 02:22:49PM +0200, Tony Sarendal wrote: Good afternoon, Friday question: Does anyone have recommendation on graphics hardware to use for 4k screens and OpenBSD ? I'm thinking about

Re: packets logged by pf without log rule

this in the live firewalls. Happens on 5.4 and 5.5, if memory serves me right I saw it on 5.3's also. Assistance with understanding this would be appreciated. I will use free time slots to look at the code, but due to limited knowledge and skills it is quite time consuming. Regards Tony

packets logged by pf without log rule

239.192.104.1 (DF) [tos 0xc0] [ttl 1] Regards Tony OpenBSD 5.6-current (GENERIC.MP) #0: Wed Sep 10 13:39:02 CEST 2014 r...@obc3.rad.unibet.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8545173504 (8149MB) avail mem = 8308969472 (7924MB) mpath0 at root scsibus0 at mpath0: 256 targets

Re: bgpctl show advertisements?

bgpctl show rib nei neighbor out On Mon, Sep 15, 2014 at 3:55 AM, Adam Thompson athom...@athompso.net wrote: Is there any functionality in bgpctl(8) that will show me precisely what I'm advertising to a neighbor? If not, is there any easier way - assuming I don't have access to my

Re: pfsync and trunk

On Sat, Sep 13, 2014 at 10:17 AM, Henning Brauer hb-open...@ml.bsws.de wrote: * Tony Sarendal t...@polarcap.org [2014-09-03 06:48]: The initial request disappearing and the firewalls staying demoted forever are independent issues. sure about that? the demotion counter for the interface

Re: pfsync and trunk

he's clearly indicating currently supported OpenBSD versions 5.4 and 5.5 near the bottom...) On 30 Aug 2014 at 14:22, Chuck Burns wrote: On Saturday, August 30, 2014 8:27:24 AM Tony Sarendal wrote: Good morning, I'm having issues with pfsync on trunk interfaces, although I suspect

Re: pfsync and trunk

, Tony Sarendal t...@polarcap.org wrote: As Chuck pointed out this has nothing to do with pfsense or freebsd. While I dig deeper I'm running with the following config to get around the problem: pf1.swe1# cat /etc/hostname.pfsync0 ! sleep 10 ! ifconfig $1 syncdev vlan44 syncpeer 10.240.252.77

pfsync and trunk

, failover and lacp trunk(4). Regards Tony

Re: Does OpenBGPd suffer collateral damage with this?

What a horrible article. I thought the kebab I just had for lunch ruined my day, reading that was worse. On Mon, Aug 18, 2014 at 2:27 AM, Rod Whitworth glis...@witworx.com wrote: http://www.smh.com.au/technology/technology-news/how-flakey-is-the-inter net-20140816-104t8p.html I would love

Re: Does OpenBGPd suffer collateral damage with this?

wrote: -Ursprüngliche Nachricht- Von: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] Im Auftrag von Tony Sarendal Gesendet: Montag, 18. August 2014 12:55 An: misc Betreff: Re: Does OpenBGPd suffer collateral damage with this? What a horrible article. I thought

Re: unlink utility

Ted Unangst wrote Sometimes I think refusing to implement stupid standards is the only way to fight back. Thank you. For such as this I lurk on this list, not for help with OpenBSD, but for help with everything else. Something OpenBSD does get right. Good Stuff is not made from more of Bad

Re: OPENBSD FUNDING SOLUTION -- COME AND PARTICIPATE

On 20 Jan 2014 06:16, noah pugsley noah.pugs...@gmail.com wrote: Just saw this on slashdot: http://www.thedrinkingrecord.com/2014/01/19/romanian-billionaire-saves-openbsd/ Any idea if it's true? Treat as rumour, unconfirmed. I'm seeing a lot of people going off half-cocked in this, which is

Re: Security

Harry Callahan: A man's GOT to know his limitations. -Original Message- From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of agrquinonez Sent: Friday, January 10, 2014 10:20 AM To: misc@openbsd.org Subject: Re: Security On 01/10/2014 04:44 AM, Nick Holland wrote:

Re: OpenBSD for mobile

On 26 Nov 2013 19:05, Alexander Hall alexan...@beard.se wrote: On 11/26/13 17:08, openda...@hushmail.com wrote: Hi, Are there any plans to make somelike like http://www.ubuntu.com/phonefor OpenBSD? Not that I know of, and I can't imagine the platforms being open enough. Yes, that's it.

For Google+ users: BSD community

If you're using Google+, this community brings together all BSD systems and BSD projects such as pf, OpenSSH and ZFS. I started it so I could keep in touch with what's going on in other BSDs while I happily use OpenBSD, and that's pretty much how it works out. It's spam-free and 100% on topic,

Re: For Google+ users: BSD community

Join both! Breen Ouellette's community is best for a focus on OpenBSD.

Re: cvsync, rsync

INSUFFICIENT DATA -Original Message- From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of hru...@gmail.com Sent: Tuesday, September 17, 2013 10:28 AM To: misc@openbsd.org Subject: Re: cvsync, rsync Marc Espie es...@nerim.net wrote: You have strings A and B, and

Re: php sending mail via sendmail

..250-ETRN..250-DELIVERBY..250HELP.. --- On Thu, Sep 5, 2013 at 2:18 PM, Stuart Henderson s...@spacehopper.orgwrote: On 2013-09-02, Tony Berth tonybe...@googlemail.com wrote: well the script does talk to google mail correctly so somehow it should work. If the script is talking to google

php sending mail via sendmail

Dear group, when trying different php based open source packages on a chrooted 5.2 box, I was faced with the problem not being able to send email from their php script. All the times I get following entry in the maillog: w...@example.com [x.x.x.x] did not issue MAIL/EXPN/VRFY/ETRN during

Re: php sending mail via sendmail

did install both. Now, what are the settings in order to make them work? Found following for femail: http://rilk.com/en/doc/node/48 but these changes didn't have any effect. I still get the same error. Thanks On Mon, Sep 2, 2013 at 9:11 PM, Stefan Sperling s...@openbsd.org wrote: On Mon,

Re: php sending mail via sendmail

, what about the pear-Mail package? Is there something I should adapt? Thanks for your help On Mon, Sep 2, 2013 at 11:58 PM, Stefan Sperling s...@openbsd.org wrote: On Mon, Sep 02, 2013 at 09:23:46PM +0200, Tony Berth wrote: did install both. Now, what are the settings in order to make them

Re: php sending mail via sendmail

. But others like statusnet are doing the same too. I have to say that vtiger crm is working fine though! Thanks On Tue, Sep 3, 2013 at 1:22 AM, Stefan Sperling s...@openbsd.org wrote: On Tue, Sep 03, 2013 at 12:19:14AM +0200, Tony Berth wrote: I already have these settings implemented but I still get

Re: Two primary OBSD partitions on a HDD

josef.win...@email.de wrote I read fdisk(8) carefully (At least I think so), but I repeatedly failed to install two OBSDS on two primary partitions of a HDD. The idea was to realize a multiboot by toogleing the boot-flag to the primary partition of the particular OBSD system I want to boot.

Re: VirtualBox+chive+mysql

On Wed, Aug 14, 2013 at 4:48 PM, Bruno Flueckiger inform...@gmx.net wrote: On 14.08.2013 14:21, Tony Berth wrote: Dear group, I have following configuration: - latest Ubuntu amd64 server - VirtualBox running on the above Ubuntu server - openbsd 5.3 (amd64) with mysql and chive installed

VirtualBox+chive+mysql

Dear group, I have following configuration: - latest Ubuntu amd64 server - VirtualBox running on the above Ubuntu server - openbsd 5.3 (amd64) with mysql and chive installed and running inside VirtualBox when I try to connect to the openbsd mysql server from mysql workbench installed in Ubuntu,

yacy on openbsd

Dear group, is anyone running yacy on a openbsd box? I tested the latest one yacy on a 5.3 amd64 but didn't succeed. The only resource I found was: http://ventejuy.es/cgi-bin/post?p=11051522005289 (in Spanish!) but was unable to connect to localhost:8090 Thanks

Re: goaccess 0.5

, 'configure' gives the same error. Should I send you the config.log too? Thanks On Wed, Jul 10, 2013 at 1:31 AM, Juan Francisco Cantero Hurtado i...@juanfra.info wrote: On Wed, Jul 10, 2013 at 12:01:11AM +0300, Tony Berth wrote: is anyone using goaccess 0.5 with 5.2 or 5.3? When running

goaccess 0.5

is anyone using goaccess 0.5 with 5.2 or 5.3? When running './configure' I get: checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no

Re: softraid: adding volumes, CPU requirements, RAID5

It works. Translation: It has worked (mostly) for me. (A few times) (Seems like Theo has a good quote about gcc) Boris Goldberg wrote: Hello guys, Thursday, July 4, 2013, 12:40:50 PM, Nick Holland wrote: If the softraid is so raw yet, why the old good RAIDFrame was removed starting the

routes stuck in bgpd after ifconfig destroy

Tested on 5.2 and current. routes get stuck in bgpd after ifconfig destroy. titan# cat /etc/bgpd.conf AS 65001 router-id 10.1.1.1 network inet connected network inet static titan# bgpctl show rib flags: * = Valid, = Selected, I = via IBGP, A = Announced, S = Stale origin: i = IGP, e = EGP, ?

max RAM

Dear group, what is the max RAM the current release can support? Thanks Tony

Re: max RAM

on a amd64 server. I don't know if the 4GB limit is still in place. Thanks Tony On Sat, Jun 15, 2013 at 8:07 PM, Zé Loff zel...@zeloff.org wrote: On your Zaurus or on your old mac or on your 386 or on your amd64 server or on your VAX or on your sparc64 or...? On 15/06/2013, at 18:37

Re: max RAM [solved]

Thanks On Sat, Jun 15, 2013 at 9:02 PM, Stuart Henderson s...@spacehopper.orgwrote: On 2013-06-15, Tony Berth tonybe...@googlemail.com wrote: on a amd64 server. I don't know if the 4GB limit is still in place. 4.9 is the last release which was limited to 4GB on amd64. http

remote management

Dear Group, I would like to know what kind of environment you use for remote management of one or more openbsd servers. Which KVM over IP solution would you recomend. Thanks Tony

Re: remote management

thanks for the prompt replies. Any recommendation for IPMI cards and KVM over IP switches that work well with openbsd? Tony On Tue, May 14, 2013 at 12:07 AM, Nick Holland n...@holland-consulting.netwrote: On 05/13/2013 03:24 PM, Tony Berth wrote: Dear Group, I would like to know what kind

Re: sendmail config [solved]

Thanks for all the prompt replies. The MUA is indeed the place to do the modifications. Just for the records, in SqurrelMail I had to modify the file 'class/deliver/Deliver.class.php' Tony On Fri, Apr 12, 2013 at 11:06 AM, James Griffin j...@kontrol.kode5.netwrote: Fri 12.Apr

Re: sendmail config

I want to display the IP of the mail server only, as client IPs isn't a relevant info for the 'outside world'. The same applies to the 'User-Agent' field. Concerning the 'References', It was just an idea but still I want to have that option regardless how I could ever use it. Thanks Tony

Re: sendmail config

good point indeed. I tried with conf.pl but didn't have any effect. For example, I turned version info off but still, sendmail propagates the complete info. Thanks Tony On Fri, Apr 12, 2013 at 9:36 AM, Ted Unangst t...@tedunangst.com wrote: On Fri, Apr 12, 2013 at 09:27, Tony Berth wrote

sendmail config

db43aa23cdc95bb7218fa33c8aa18efa.squir...@new.host.name [from the above I would like to strip the history of the refes] *User-Agent:* SquirrelMail/1.4.22 [from the above I would like to remove the MUA] Thanks Tony

Re: PRIMERGY RX200 S2 installation problems

now I got the installation log of current trying the amd64 distro: - CD-ROM: 9F Loading /5.2/AMD64/CDBOOT probing: pc0 mem[620K 2046M a20=on] disk: hd0+* cd0 OpenBSD/amd64 CDBOOT 3.19 boot booting cd0a:/5.2/amd64/bsd.rd: 3046708 8]=0xb8eb78 entry point at 0x1001e0 [7205c766,

Re: PRIMERGY RX200 S2 installation problems

, 2012 at 2:25 PM, Nick Holland n...@holland-consulting.netwrote: On 11/29/12 06:42, Tony Berth wrote: Thanks Both i386 and amd64 fail! But, are that many differences between stable and current? You caught us, nothing has changed in OpenBSD since 1995, we just drink beer and increment

Re: PRIMERGY RX200 S2 installation problems

it is the current one (2012-12-02) Thanks On Mon, Dec 3, 2012 at 6:52 PM, Kenneth R Westerback kwesterb...@rogers.com wrote: On Mon, Dec 03, 2012 at 06:08:34PM +0200, Tony Berth wrote: here is the installation dmesg when trying to install the 5.2 i386 snapshot: And the installation dmesg

Re: PRIMERGY RX200 S2 installation problems

indeed. Looks like the mixed it up. As long as I get the 'current' log I'll send it to the list. Thanks On Mon, Dec 3, 2012 at 6:23 PM, Sebastian Reitenbach sebas...@l00-bugdead-prods.de wrote: Am Montag, 03. Dezember 2012 17:57 CET, Tony Berth tonybe...@googlemail.com schrieb

Re: PRIMERGY RX200 S2 installation problems

tomas.bod...@gmail.comwrote: On Wed, Nov 28, 2012 at 6:55 PM, Tony Berth tonybe...@googlemail.com wrote: Dear group, I was trying to install OBSD 5.2 on a Fujitsu-Siemens PRIMERGY RX200 S2 (dual CPU) and I get following errors: By any chance ability to try current

Re: PRIMERGY RX200 S2 installation problems

Thanks Both i386 and amd64 fail! But, are that many differences between stable and current? On Thu, Nov 29, 2012 at 11:20 AM, Michał Markowski markows...@gmail.comwrote: 2012/11/29 Tony Berth tonybe...@googlemail.com: s a fresh install! I couldn't find a CD image for current or did I

PRIMERGY RX200 S2 installation problems

was used during the boot process. Meaning that the smp mode is not used? Thanks Tony

Re: Unified BSD?

from all worlds? Tony http://soundcloud.com/abletony84

phpMyAdmin

Dear group, I'm trying to run phpMyAdmin on a 5.1 box (i386) with MySQL 5.1.60 installed from the OpenBSD packages. When I try to login I get: #2002 Cannot log in to the MySQL server Please note that the same mysql user is able to login remotely via the MySQL GUI workbench! Now, I came across

Re: phpMyAdmin

On Thu, Oct 25, 2012 at 10:40 PM, Richard Toohey richardtoo...@paradise.net.nz wrote: On 10/26/12 09:35, Tony Berth wrote: Dear group, I'm trying to run phpMyAdmin on a 5.1 box (i386) with MySQL 5.1.60 installed from the OpenBSD packages. When I try to login I get: #2002 Cannot log

Re: !!!!

Eric Furman wrote: A very simple addition to the FAQ would not be a problem. WOW! This question seems to be asked a lot! A simple addition to the FAQ does not seem to be a problem, Nick. Yes, I know , a very stupid question asked many times. A simplele FUCJ IR Perhaps because it is a FAQ not a

Re: More sensible and consistent rc.conf.local

Mikkel Bang wrote: I'm just thinking that from a layman's perspective named_flags= doesn't make as much sense as named=YES if all you want to do is start named. The way it is right now seems more like monkey patching from the days before OpenBSD became popular. I acknowledge the whole it's been

OpenBSD on GitHub

of pull requests, mostly on the documentation side though. Tony

  1   2   3   4   5   6   7   >