Re: Software caused connection abort (53) squid 4.6 on OpenBSD 6.5
I have applied that diff to my system and will post once I know the results. Thank you. On Thu, May 23, 2019 at 11:41 AM Kasak wrote: > Have you seen this https://github.com/squid-cache/squid/pull/404 ? > > 23 мая 2019 г., в 18:12, Marcus MERIGHI написал(а): > > Hello, > > same here. > > I guess bugs@ or ports@ would be better. > > w...@wootsie.com (w...@wootsie.com), 2019.05.23 (Thu) 14:36 (CEST): > > I have been running into a repeatable error reported by squid 4.6 from > > packages once the system has been under a steady load for ~12 hours. > > > I would not call it repeatable because I can't repeat it at will. > I did not notice the 12 hours interval. But I have by far less users > behind squid. > > Example squid cache.log entry: > > 2019/05/22 15:03:41 kid1| oldAccept FD 18, 0.0.0.0 [ job2]: (53) Software > > caused connection abort > > > 2019/05/23 11:51:43 kid1| oldAccept FD 18, 0.0.0.0 [ job4]: (53) > Software caused connection abort > > I see this on one machine with windows clients (max. 4) behind it. > I do not see this on another machine with an OpenBSD client (just 1) > behind it. > > Both are pcengines APUs, but different versions. dmesgs below. > > Both setups are up for years, the problem on one of the machines showed > right after upgrading last week. > > Marcus > > the machine that does *not* show the symptom: > > OpenBSD 6.5 (GENERIC.MP) #0: Wed Apr 24 23:38:54 CEST 2019 >r...@syspatch-65-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/ > GENERIC.MP > real mem = 4246003712 (4049MB) > avail mem = 4107694080 (3917MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdf16d820 (7 entries) > bios0: vendor coreboot version "4.0" date 09/08/2014 > bios0: PC Engines APU > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP SPCR HPET APIC HEST SSDT SSDT SSDT > acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) > PBR7(S4) PE20(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) > UOH3(S3) UOH4(S3) UOH5(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpihpet0 at acpi0: 14318180 Hz > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD G-T40E Processor, 1000.14 MHz, 14-02-00 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: 8 4MB entries fully associative > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully > associative > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 200MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD G-T40E Processor, 1000.00 MHz, 14-02-00 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu1: 8 4MB entries fully associative > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully > associative > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec0, version 21, 24 pins > acpiprt0 at acpi0: bus -1 (AGPB) > acpiprt1 at acpi0: bus -1 (HDMI) > acpiprt2 at acpi0: bus 1 (PBR4) > acpiprt3 at acpi0: bus 2 (PBR5) > acpiprt4 at acpi0: bus 3 (PBR6) > acpiprt5 at acpi0: bus -1 (PBR7) > acpiprt6 at acpi0: bus 5 (PE20) > acpiprt7 at acpi0: bus -1 (PE21) > acpiprt8 at acpi0: bus -1 (PE22) > acpiprt9 at acpi0: bus -1 (PE23) > acpiprt10 at acpi0: bus 0 (PCI0) > acpiprt11 at acpi0: bus 4 (PIBR) > acpicpu0 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS > acpicpu1 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS > acpipci0 at acpi0 PCI0: 0x 0x0011 0x0001 > acpicmos0 at acpi0 > acpibtn0 at acpi0: PWRB > cpu0: 1000 MHz: speeds: 1000 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 > ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > (0x2c00), msi, address 00:0d:b9:3f:78:18 > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > (0x2c00), msi, address 00:0d:b9:3f:78:19 > rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi > pci3 at ppb2 bus 3 > re2 at pci3 dev 0
Re: Software caused connection abort (53) squid 4.6 on OpenBSD 6.5
Have you seen this https://github.com/squid-cache/squid/pull/404 ? > 23 мая 2019 г., в 18:12, Marcus MERIGHI написал(а): > > Hello, > > same here. > > I guess bugs@ or ports@ would be better. > > w...@wootsie.com (w...@wootsie.com), 2019.05.23 (Thu) 14:36 (CEST): >> I have been running into a repeatable error reported by squid 4.6 from >> packages once the system has been under a steady load for ~12 hours. > > I would not call it repeatable because I can't repeat it at will. > I did not notice the 12 hours interval. But I have by far less users > behind squid. > >> Example squid cache.log entry: >> 2019/05/22 15:03:41 kid1| oldAccept FD 18, 0.0.0.0 [ job2]: (53) Software >> caused connection abort > > 2019/05/23 11:51:43 kid1| oldAccept FD 18, 0.0.0.0 [ job4]: (53) > Software caused connection abort > > I see this on one machine with windows clients (max. 4) behind it. > I do not see this on another machine with an OpenBSD client (just 1) > behind it. > > Both are pcengines APUs, but different versions. dmesgs below. > > Both setups are up for years, the problem on one of the machines showed > right after upgrading last week. > > Marcus > > the machine that does *not* show the symptom: > > OpenBSD 6.5 (GENERIC.MP) #0: Wed Apr 24 23:38:54 CEST 2019 > > r...@syspatch-65-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4246003712 (4049MB) > avail mem = 4107694080 (3917MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdf16d820 (7 entries) > bios0: vendor coreboot version "4.0" date 09/08/2014 > bios0: PC Engines APU > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP SPCR HPET APIC HEST SSDT SSDT SSDT > acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) > PE20(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) UOH3(S3) > UOH4(S3) UOH5(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpihpet0 at acpi0: 14318180 Hz > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD G-T40E Processor, 1000.14 MHz, 14-02-00 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: 8 4MB entries fully associative > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 200MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD G-T40E Processor, 1000.00 MHz, 14-02-00 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu1: 8 4MB entries fully associative > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec0, version 21, 24 pins > acpiprt0 at acpi0: bus -1 (AGPB) > acpiprt1 at acpi0: bus -1 (HDMI) > acpiprt2 at acpi0: bus 1 (PBR4) > acpiprt3 at acpi0: bus 2 (PBR5) > acpiprt4 at acpi0: bus 3 (PBR6) > acpiprt5 at acpi0: bus -1 (PBR7) > acpiprt6 at acpi0: bus 5 (PE20) > acpiprt7 at acpi0: bus -1 (PE21) > acpiprt8 at acpi0: bus -1 (PE22) > acpiprt9 at acpi0: bus -1 (PE23) > acpiprt10 at acpi0: bus 0 (PCI0) > acpiprt11 at acpi0: bus 4 (PIBR) > acpicpu0 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS > acpicpu1 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS > acpipci0 at acpi0 PCI0: 0x 0x0011 0x0001 > acpicmos0 at acpi0 > acpibtn0 at acpi0: PWRB > cpu0: 1000 MHz: speeds: 1000 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 > ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > (0x2c00), msi, address 00:0d:b9:3f:78:18 > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > (0x2c00), msi, address 00:0d:b9:3f:78:19 > rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi > pci3 at ppb2 bus 3 > re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > (0x2c00), msi, address 00:0d:b9:3f:78:1a > rgephy2 at re2 phy 7:
Re: Software caused connection abort (53) squid 4.6 on OpenBSD 6.5
Hello, same here. I guess bugs@ or ports@ would be better. w...@wootsie.com (w...@wootsie.com), 2019.05.23 (Thu) 14:36 (CEST): > I have been running into a repeatable error reported by squid 4.6 from > packages once the system has been under a steady load for ~12 hours. I would not call it repeatable because I can't repeat it at will. I did not notice the 12 hours interval. But I have by far less users behind squid. > Example squid cache.log entry: > 2019/05/22 15:03:41 kid1| oldAccept FD 18, 0.0.0.0 [ job2]: (53) Software > caused connection abort 2019/05/23 11:51:43 kid1| oldAccept FD 18, 0.0.0.0 [ job4]: (53) Software caused connection abort I see this on one machine with windows clients (max. 4) behind it. I do not see this on another machine with an OpenBSD client (just 1) behind it. Both are pcengines APUs, but different versions. dmesgs below. Both setups are up for years, the problem on one of the machines showed right after upgrading last week. Marcus the machine that does *not* show the symptom: OpenBSD 6.5 (GENERIC.MP) #0: Wed Apr 24 23:38:54 CEST 2019 r...@syspatch-65-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4246003712 (4049MB) avail mem = 4107694080 (3917MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdf16d820 (7 entries) bios0: vendor coreboot version "4.0" date 09/08/2014 bios0: PC Engines APU acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SPCR HPET APIC HEST SSDT SSDT SSDT acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PE20(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD G-T40E Processor, 1000.14 MHz, 14-02-00 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 200MHz cpu0: mwait min=64, max=64, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD G-T40E Processor, 1000.00 MHz, 14-02-00 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec0, version 21, 24 pins acpiprt0 at acpi0: bus -1 (AGPB) acpiprt1 at acpi0: bus -1 (HDMI) acpiprt2 at acpi0: bus 1 (PBR4) acpiprt3 at acpi0: bus 2 (PBR5) acpiprt4 at acpi0: bus 3 (PBR6) acpiprt5 at acpi0: bus -1 (PBR7) acpiprt6 at acpi0: bus 5 (PE20) acpiprt7 at acpi0: bus -1 (PE21) acpiprt8 at acpi0: bus -1 (PE22) acpiprt9 at acpi0: bus -1 (PE23) acpiprt10 at acpi0: bus 0 (PCI0) acpiprt11 at acpi0: bus 4 (PIBR) acpicpu0 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS acpicpu1 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS acpipci0 at acpi0 PCI0: 0x 0x0011 0x0001 acpicmos0 at acpi0 acpibtn0 at acpi0: PWRB cpu0: 1000 MHz: speeds: 1000 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), msi, address 00:0d:b9:3f:78:18 rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi pci2 at ppb1 bus 2 re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), msi, address 00:0d:b9:3f:78:19 rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi pci3 at ppb2 bus 3 re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), msi, address 00:0d:b9:3f:78:1a rgephy2 at re2 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI 1.2 ahci0: port 0: 3.0Gb/s ahci0: port 1: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: SCSI3 0/direct fixed naa.5e83a977c035d166 sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin sd1 at scsibus1 targ 1 lun
Re: Software caused connection abort (53) squid 4.6 on OpenBSD 6.5
On Thu, May 23, 2019 at 5:37 AM wrote: > I have been running into a repeatable error reported by squid 4.6 from > packages once the system has been under a steady load for ~12 hours. > I have also experienced this, though in my case the issue appeared to be isolated to a single site (which started working correctly after restarting). I'm considering downgrading squid locally to the version that shipped with 6.4 in order to work around the issue. Jeremy
Software caused connection abort (53) squid 4.6 on OpenBSD 6.5
Hello, I have been running into a repeatable error reported by squid 4.6 from packages once the system has been under a steady load for ~12 hours. Example squid cache.log entry: 2019/05/22 15:03:41 kid1| oldAccept FD 18, 0.0.0.0 [ job2]: (53) Software caused connection abort The file descriptor given is always squid's main listening socket: 18 Socket0 00 0.0.0.0:3128 HTTP Socket Approx 120 clients using this system as their proxy. Once this error hits, then web clients fail and squid needs to be restarted to restore operation. At first I had an LACP based trunk with the system's two em interfaces, which I thought might be causing the issue (my first time using trunk). So I switched to using the single bge interface but the errors still occur. Can anyone suggest what I should be looking at to find the cause? Thank you. # netstat -in NameMtu Network Address Ipkts IfailOpkts Ofail Colls lo0 32768 66 0 66 0 0 lo0 32768 ::1/128 ::1 66 0 66 0 0 lo0 32768 fe80::%lo0/ fe80::1%lo0 66 0 66 0 0 lo0 32768 127/8 127.0.0.1 66 0 66 0 0 bge01500d4:ae:52:c1:07:f2 32563772 0 34912639 0 0 bge01500 172.16.1/24 172.16.1.16 32563772 0 34912639 0 0 em0*150000:1b:21:5e:06:410 00 0 0 em1*150000:1b:21:5e:06:850 00 0 0 enc0* 00 00 0 0 pflog0 331360 00 0 0 # netstat -m 820 mbufs in use: 408 mbufs allocated to data 396 mbufs allocated to packet headers 16 mbufs allocated to socket names and addresses 398/1328 mbuf 2048 byte clusters in use (current/peak) 0/60 mbuf 2112 byte clusters in use (current/peak) 0/200 mbuf 4096 byte clusters in use (current/peak) 0/144 mbuf 8192 byte clusters in use (current/peak) 0/42 mbuf 9216 byte clusters in use (current/peak) 0/60 mbuf 12288 byte clusters in use (current/peak) 0/48 mbuf 16384 byte clusters in use (current/peak) 0/8 mbuf 65536 byte clusters in use (current/peak) 6452/7796/524288 Kbytes allocated to network (current/peak/max) 0 requests for memory denied 0 requests for memory delayed 0 calls to protocol drain routines OpenBSD 6.5 (GENERIC.MP) #0: Wed Apr 24 23:38:54 CEST 2019 r...@syspatch-65-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/ GENERIC.MP real mem = 12865998848 (12269MB) avail mem = 12466450432 (11888MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0450 (77 entries) bios0: vendor Dell Inc. version "A16" date 07/06/2012 bios0: Dell Inc. Precision WorkStation T3500 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET TCPA DMAR SLIC SSDT acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI1(S5) PCI2(S5) PCI3(S5) PCI4(S5) PCI5(S5) PCI6(S5) KBD_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU W3565 @ 3.20GHz, .80 MHz, 06-1a-05 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Xeon(R) CPU W3565 @ 3.20GHz, .28 MHz, 06-1a-05 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Xeon(R) CPU W3565 @ 3.20GHz, .28 MHz, 06-1a-05 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Xeon(R) CPU W3565 @ 3.20GHz, .28 MHz, 06-1a-05 cpu3:
