Just in case this would help out any developers here is my
newest system with the latest snapshot installed on it.
OpenBSD 4.1-current (GENERIC.MP) #117: Sat Jun 2 16:08:36 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2145939456 (2046MB)
avail mem = 2059698176 (1964MB)
User Kernel Config
UKC> enable acpi
395 acpi0 already enabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/20/06, BIOS32 rev. 0 @ 0xf1dd0,
SMBIOS rev. 2.4 @ 0xf0000 (77 entries)
bios0: ASUSTeK Computer INC. StrikerExtreme
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8b4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd760/336 (19 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 19 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 7 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #8 is the last bus
bios0: ROM list: 0xc0000/0xc400 0xd0000/0x4000!
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 267 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA C55 Host" rev 0xa2
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 2 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 3 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 4 not configured
"NVIDIA C55 Memory" rev 0xa2 at pci0 dev 0 function 5 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 6 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 7 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 0 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 2 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 3 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 4 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 5 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 6 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 0 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 2 not configured
ppb0 at pci0 dev 3 function 0 "NVIDIA C55 PCIE" rev 0xa1
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"NVIDIA MCP55 Memory" rev 0xa1 at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0 "NVIDIA MCP55 ISA" rev 0xa2
nviic0 at pci0 dev 10 function 1 "NVIDIA MCP55 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
lm1 at iic1 addr 0x2d: W83791D
adt0 at iic1 addr 0x2e: adt7475 rev 0x69
"NVIDIA MCP55 Memory" rev 0xa2 at pci0 dev 10 function 2 not configured
ohci0 at pci0 dev 11 function 0 "NVIDIA MCP55 USB" rev 0xa1: apic 4 int 5
(irq 5), version 1.0, legacy support
ehci0 at pci0 dev 11 function 1 "NVIDIA MCP55 USB" rev 0xa2: apic 4 int 10
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
pciide0 at pci0 dev 13 function 0 "NVIDIA MCP55 IDE" rev 0xa1: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW AW-Q170A, 1.70> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <SONY, CD-RW CRX230EE, 2YS8> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 14 function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide1: using apic 4 int 10 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD1600JS-00NCB1>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <WDC WD1600JS-00NCB1>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 14 function 1 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide2: using apic 4 int 11 (irq 11) for native-PCI interrupt
wd2 at pciide2 channel 0 drive 0: <WDC WD1600JS-00NCB1>
wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd2(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide3 at pci0 dev 14 function 2 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide3: using apic 4 int 5 (irq 5) for native-PCI interrupt
ppb1 at pci0 dev 15 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
"VIA VT6306 FireWire" rev 0xc0 at pci2 dev 11 function 0 not configured
azalia0 at pci0 dev 15 function 1 "NVIDIA MCP55 HD Audio" rev 0xa2: apic 4
int 10 (irq 10)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x11d4/0x198b (rev. 2.0), HDA version 1.0
audio0 at azalia0
nfe0 at pci0 dev 17 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 4 int 7
(irq 7), address 00:1a:92:46:e0:44
eephy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
nfe1 at pci0 dev 18 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 4 int 5
(irq 5), address 00:1a:92:46:ed:f7
eephy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
ppb2 at pci0 dev 19 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci3 at ppb2 bus 3
ppb3 at pci0 dev 20 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci4 at ppb3 bus 4
ppb4 at pci0 dev 21 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci5 at ppb4 bus 5
ppb5 at pci0 dev 22 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci6 at ppb5 bus 6
sili0 at pci6 dev 0 function 0 "CMD Technology SiI3132 SATA" rev 0x01: apic
4 int 7 (irq 7)
scsibus2 at sili0: 2 targets
ppb6 at pci0 dev 23 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci7 at ppb6 bus 7
ppb7 at pci0 dev 24 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci8 at ppb7 bus 8
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
apm0: disconnected
umass0 at uhub0 port 5 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.26, addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets
sd0 at scsibus3 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct
removable
sd0: drive offline
sd1 at scsibus3 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct
removable
sd1: drive offline
sd2 at scsibus3 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct
removable
sd2: drive offline
sd3 at scsibus3 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct
removable
sd3: drive offline
uhub2 at uhub1 port 1
uhub2: Logitech Logitech G15 Keyboard, rev 1.10/1.03, addr 2
uhub2: 4 ports with 2 removable, bus powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech Logitech Gaming Keyboard, rev 2.00/1.70, addr 3, iclass
3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: Logitech Logitech Gaming Keyboard, rev 2.00/1.70, addr 3, iclass
3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=1, output=20, feature=1
uhidev2 at uhub2 port 4 configuration 1 interface 0
uhidev2: G15 Keyboard G15 Keyboard, rev 2.00/1.03, addr 4, iclass 3/0
uhidev2: 3 report ids
uhid3 at uhidev2 reportid 1: input=8, output=0, feature=0
uhid4 at uhidev2 reportid 2: input=8, output=18, feature=3
uhid5 at uhidev2 reportid 3: input=0, output=991, feature=0
uhidev3 at uhub1 port 4 configuration 1 interface 0
uhidev3: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 5, iclass 3/1
ums0 at uhidev3: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
softraid0 at root
sd0(umass0:1:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
COMMAND INFO: 0xaa5540
ASC/ASCQ: Medium Not Present
sd1(umass0:1:1): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
COMMAND INFO: 0xaa5540
ASC/ASCQ: Medium Not Present
sd2(umass0:1:2): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
COMMAND INFO: 0xaa5540
ASC/ASCQ: Medium Not Present
sd3(umass0:1:3): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
COMMAND INFO: 0xaa5540
ASC/ASCQ: Medium Not Present
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd2 matches BIOS drive 0x82
root on wd2a swap on wd2b dump on wd2b
# sysctl hw
hw.machine=i386
hw.model=Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class)
hw.ncpu=2
hw.byteorder=1234
hw.physmem=2145939456
hw.usermem=2145931264
hw.pagesize=4096
hw.disknames=cd0,cd1,wd0,wd1,wd2,fd0,sd0,sd1,sd2,sd3
hw.diskcount=10
hw.sensors.cpu0.temp0=51.00 degC
hw.sensors.lm1.temp0=-48.00 degC
hw.sensors.lm1.volt0=1.49 VDC (VCore)
hw.sensors.lm1.volt1=1.50 VDC (VINR0)
hw.sensors.lm1.volt2=1.25 VDC (+3.3V)
hw.sensors.lm1.volt3=5.03 VDC (+5V)
hw.sensors.lm1.volt4=3.53 VDC (+12V)
hw.sensors.lm1.volt5=-9.57 VDC (-12V)
hw.sensors.lm1.volt6=-3.24 VDC (-5V)
hw.sensors.lm1.volt7=4.39 VDC (5VSB)
hw.sensors.lm1.volt8=3.18 VDC (VBAT)
hw.sensors.lm1.volt9=1.87 VDC (VINR1)
hw.sensors.adt0.temp0=0.00 degC (Remote)
hw.sensors.adt0.temp1=106.00 degC (Internal)
hw.sensors.adt0.temp2=0.00 degC (Remote)
hw.sensors.adt0.volt0=0.00 VDC (Vccp)
hw.sensors.adt0.volt1=3.32 VDC (Vcc)
hw.sensors.it0.temp0=21.00 degC
hw.sensors.it0.temp1=38.00 degC
hw.sensors.it0.temp2=201.00 degC
hw.sensors.it0.fan0=15340 RPM
hw.sensors.it0.volt0=2.27 VDC (VCORE_A)
hw.sensors.it0.volt1=2.91 VDC (VCORE_B)
hw.sensors.it0.volt2=0.05 VDC (+3.3V)
hw.sensors.it0.volt3=4.97 VDC (+5V)
hw.sensors.it0.volt4=11.84 VDC (+12V)
hw.sensors.it0.volt5=-8.45 VDC (Unused)
hw.sensors.it0.volt6=-16.50 VDC (-12V)
hw.sensors.it0.volt7=4.89 VDC (+5VSB)
hw.sensors.it0.volt8=3.02 VDC (VBAT)
hw.cpuspeed=2139
hw.vendor=ASUSTeK Computer INC.
hw.product=StrikerExtreme
hw.uuid=ac11b817-79a8-db11-9b6b-6140488b35a5
#
