Re: OpenBSD on first gen Asus eeePCs
On Sat, Sep 19, 2009 at 9:07 PM, frantisek holop min...@obiit.org wrote: hmm, on Sat, Sep 19, 2009 at 03:38:06PM +0400, Alexander Polakov said that Try setting OS Installation in BIOS Setup to Finished. has been like that all the time. Yes, mine too. Still same problem.
Re: OpenBSD on first gen Asus eeePCs
2009/9/18, frantisek holop min...@obiit.org: hmm, on Thu, Sep 17, 2009 at 04:20:09PM -0400, Brad Tilley said that drives so I lay them out manually, but other than that, everything works OK (except the built-in wireless). I'm considering an Acer does the built in usb emulated sd card reader works? i can read anything from it, but writing anything big ( 100MB) freezes first the process doing the writing, then the io subsystem, and eventually the whole system. Try setting OS Installation in BIOS Setup to Finished.
Re: OpenBSD on first gen Asus eeePCs
hmm, on Sat, Sep 19, 2009 at 03:38:06PM +0400, Alexander Polakov said that Try setting OS Installation in BIOS Setup to Finished. has been like that all the time. -f -- nothing is fool-proof to a sufficiently talented fool.
Re: OpenBSD on first gen Asus eeePCs
Brad Tilley wrote: On Thu, Sep 17, 2009 at 8:58 PM, frantisek holop min...@obiit.org wrote: does the built in usb emulated sd card reader works? i can read anything from it, but writing anything big ( 100MB) freezes first the process doing the writing, then the io subsystem, and eventually the whole system. I tested this evening on i386 -current as of 9-14-2009. # dd if=/dev/zero of=big.bin count=750 bs=1m 750+0 records in 750+0 records out 786432000 bytes transferred in 46.633 secs (16864064 bytes/sec) I then tried to copy the 750 MB file to a 2 GB SD card that had a msdos (fat) file system. The eeePC froze-up rather hard, but was still sort-of usable. I would be glad to debug more should an OS developer show me how/what to do. Here is some output I could copy before the system went totally unresponsive... about 5 mins passed before the ath msgs appeared on console: # cp big.bin /mnt ath0 detached ath0 at pci3 dev 0 function 0 Atheros AR5424 rev 0x01: apic 1 int 18 (irq 10) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:xx:xx:xx Rebooted (pressed and held power button) and tried the same thing with an older 32 MB SD card (also formatted msdos), dd'ed a 28 MB file and attempted to copy it. Same thing happened. So just for fun, I formatted newfs on both SD cards and tried the copies again. Both worked fine with ffs file systems. This is not the most accurate test, but it seems that it may to be msdos file system related. Were your SD cards formatted fat? Have you had the issue on a ffs formatted card? Brad It doesn't seem like just an msdos issue to me. I can reproduce the described behavior (without the ath detachment) on my eee pc 900 with an msdos and an ffs sd card. When it freezes while writing, there is a file created with a size of 0 bytes. Sometimes the write succeeds. But an ls on the mount point freezes with a D+ state. Building a kernel with MSDOSFS_DEBUG showed nothing so far. Dawe
Re: OpenBSD on first gen Asus eeePCs
On Fri, Sep 18, 2009 at 9:30 PM, Dawe dawed...@gmx.de wrote: It doesn't seem like just an msdos issue to me. I made my 701 model lock-up while using a ffs formatted SD card, but not by coping files ( I tried that a few dozen times w/o issue). I directed the output of dd to a file on the SD card and that did the trick. Brad
OpenBSD on first gen Asus eeePCs
Hey Misc, I'm running -current on a first gen Asus eeePC (701 series). It has the small 4GB drive, so I use an additional 4GB USB flash drive mounted as /usr in order to have room to do stuff. Works OK, just wondering if anyone else runs OpenBSD like this on these laptops. The new disk setup sizing algorithm doesn't work well on these small drives so I lay them out manually, but other than that, everything works OK (except the built-in wireless). I'm considering an Acer Aspire One as an upgrade to the old eeePC, can anyone recommend those? Brad
Re: OpenBSD on first gen Asus eeePCs
Hi, I'm using a MSI Wind U100, and so far I'm happy with it. Everything works (wireless, bluetooth etc.), except for the built-in webcam (or maybe that's just me... any hints are welcome). The Aspire One has an Atheros wireless cards; afaik there were problems with this driver - I don't know if it works reliable yet. Apart from the hardware compatibility I would also look at the keyboard size - some (a lot?) of the netbooks have very small keys and it's really a hassle to type on them. Robert (ignore the Belkin devices; they're from my KVM) OpenBSD 4.5 (GENERIC.MP) #108: Sat Feb 28 14:58:58 MST 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (GenuineIntel 686-class) 1.61 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR real mem = 2136244224 (2037MB) avail mem = 2057338880 (1962MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/14/08, SMBIOS rev. 2.4 @ 0x7f607010 (45 entries) bios0: vendor American Megatrends Inc. version 4.6.3 date 05/21/2009 bios0: MICRO-STAR INTERNATIONAL CO., LTD U90/U100 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC MCFG SLIC SSDT SSDT SSDT acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S1) USB1(S1) USB2(S1) USB3(S1) EHCI(S1) MC97(S4) P0P1(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (GenuineIntel 686-class) 1.61 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 1 (P0P4) acpiprt3 at acpi0: bus 2 (P0P5) acpiprt4 at acpi0: bus -1 (P0P6) acpiprt5 at acpi0: bus -1 (P0P7) acpiprt6 at acpi0: bus -1 (P0P8) acpiprt7 at acpi0: bus -1 (P0P9) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpitz0 at acpi0: critical temperature 100 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT1 model serial type LION oem acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: PWRB acpibtn2 at acpi0: SLPB acpivideo at acpi0 not configured bios0: ROM list: 0xc/0xea00! 0xcf000/0x1000 cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c1e06000c1e cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1600 MHz (1180 mV): speeds: 1600, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 82945GME Host rev 0x03 vga1 at pci0 dev 2 function 0 Intel 82945GME Video rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xc000, size 0x1000 inteldrm0 at vga1: apic 2 int 16 (irq 11) drm0 at inteldrm0 Intel 82945GM Video rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x02: apic 2 int 16 (irq 11) azalia0: codecs: Realtek ALC888 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x02: apic 2 int 16 (irq 11) pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 Realtek 8101E rev 0x02: RTL8102E (0x3480), apic 2 int 16 (irq 11), address 00:21:85:e1:26:6e rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb1 at pci0 dev 28 function 1 Intel 82801GB PCIE rev 0x02: apic 2 int 17 (irq 10) pci2 at ppb1 bus 2 ral0 at pci2 dev 0 function 0 Ralink RT2790 rev 0x00: apic 2 int 17 (irq 10), address 00:21:85:bc:7d:56 ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R) uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x02: apic 2 int 23 (irq 5) uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x02: apic 2 int 19 (irq 3) uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x02: apic 2 int 18 (irq 7) uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x02: apic 2 int 16 (irq 11) ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x02: apic 2 int 23 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xe2 pci3 at ppb2 bus 3 ichpcib0 at pci0 dev 31 function 0 Intel 82801GBM LPC rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 Intel 82801GBM SATA rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: WDC WD1600BEVT-22ZCT0 wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 Intel 82801GB SMBus rev 0x02: apic 2 int 19 (irq 3) iic0 at ichiic0 spdmem0
Re: OpenBSD on first gen Asus eeePCs
Yup I like them. - WiFi is same as eeePC (Atheros 5424) so I swpped it out with an Intel wpi - JMicron mukti card reader not supported - Intel drm :) - bsd.mp (Intel Atom supports hyper threading) - built-in camera appears to work but I've never used it. OpenBSD 4.5 (GENERIC.MP) #108: Sat Feb 28 14:58:58 MST 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80clock_battery cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR real mem = 1060163584 (1011MB) avail mem = 1016795136 (969MB) RTC BIOS diagnostic error 80clock_battery mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/09/08, SMBIOS rev. 2.4 @ 0xe8e70 (32 entries) bios0: vendor Acer version v0.3114 date 05/09/2008 bios0: Acer AOA150 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR ioapic0 at mainbus0: apid 4 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 5 (P32_) acpiprt2 at acpi0: bus 1 (EXP1) acpiprt3 at acpi0: bus 2 (EXP2) acpiprt4 at acpi0: bus 3 (EXP3) acpiprt5 at acpi0: bus 4 (EXP4) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpibat0 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpivideo at acpi0 not configured bios0: ROM list: 0xc/0xec00! 0xcf000/0x1000 cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c2406000c24 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1600 MHz (1276 mV): speeds: 1600, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 82945GME Host rev 0x03 vga1 at pci0 dev 2 function 0 Intel 82945GME Video rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x4000, size 0x1000 inteldrm0 at vga1: apic 4 int 16 (irq 11) drm0 at inteldrm0 Intel 82945GM Video rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x02: apic 4 int 16 (irq 11) azalia0: codecs: Realtek ALC268 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x02: apic 4 int 16 (irq 255) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 Intel 82801GB PCIE rev 0x02: apic 4 int 17 (irq 255) pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 Realtek 8101E rev 0x02: RTL8102EL (0x2480), apic 4 int 17 (irq 11), address 00:1e:68:d5:61:e0 rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb2 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x02: apic 4 int 18 (irq 255) pci3 at ppb2 bus 3 wpi0 at pci3 dev 0 function 0 Intel PRO/Wireless 3945ABG rev 0x02: apic 4 int 18 (irq 11), RoW, address 00:18:de:15:1a:36 ppb3 at pci0 dev 28 function 3 Intel 82801GB PCIE rev 0x02: apic 4 int 19 (irq 255) pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x02: apic 4 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x02: apic 4 int 17 (irq 11) uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x02: apic 4 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x02: apic 4 int 19 (irq 11) ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x02: apic 4 int 16 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xe2 pci5 at ppb4 bus 5 ichpcib0 at pci0 dev 31 function 0 Intel 82801GBM LPC rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 Intel 82801GBM SATA rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: ST9120817AS wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 Intel 82801GB SMBus rev 0x02: apic 4 int 17 (irq 11) iic0 at ichiic0 spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 Intel UHCI root
Re: OpenBSD on first gen Asus eeePCs
graeme wrote: Yup I like them. - WiFi is same as eeePC (Atheros 5424) so I swpped it out with an Intel wpi - JMicron mukti card reader not supported actually, I think we (for a they sort of we) figured out the issue was ACPI related, the power to the thing is turned off by the BIOS if there is no card in the reader. If you have a card in the reader at boot, it stays on. So..for SOME definitions of usable, it is usable. :) (I can't recall if having one flash card in activates both or not, or if having one in place at boot allows the removal and reinsertion, I *believe* I have tested both, but I won't swear to it). In my case, I stuck an 8G SD flash card in the thing, and use it to back up my work using rsync's --link-dest option to the flash device, and work off the hard disk. Every time I boot the thing, it does a backup to flash to save the current version of what I'm about to mess up. :) - Intel drm :) - bsd.mp (Intel Atom supports hyper threading) - built-in camera appears to work but I've never used it. it works. ok, it works. now what do I do with a camera on my laptop? I know, I'll ignore it! Anyway, I've got one of the first generation Acer Aspire One machines, bought it the day the six-cell battery version became available at my local store, had it for almost a year now. I love it. Yes, I paid far more than most people are paying for them no (I deserved it, http://nickh.org/warstories/priest.html), no regrets. Heck, I once paid $400 for a 1200bps modem. It happens in this business, don't whine. I was very excited about the eeePC, but when I put my hands on it, the keyboard was just too small for me. The first generation AAO was usable for me...and yes, most of what I do with it is typing (most of the FAQ updates for about the last year, and a lot you haven't seen yet have been worked on on my AAO. I credit the thing with improving my productivity significantly!). The lack of wireless hasn't hurt me much at all, I usually use it when I semi-want to be disconnected. The bigger keyboard on the current generation AAO is interesting, but not enough to upgrade at this point. My favorite feature is the battery -- runs OpenBSD for something like five hours on a full charge, so I don't normally carry the power pack with me. Also..the power socket on the AAO and its voltage requirements and polarity are compatible (more or less) with a lot of other older systems, so I've got something like five or six power packs for it (including an auto adapter) for a total investment of around $50. I have a couple power packs at home, one at my girlfriend's house, one at work. So, all I carry with me is the computer and a USB wireless interface that I almost never use in a very small case. My girlfriend named it Suzy (Because it is small and cute!), which has become a running joke with a lot of people (including my GF, who accuses me of taking suzy more places than I take her). I'm waiting for ACPI suspend and resume to work, so I can (you know what is coming, right?) Wake Up Little Suzy (*rimshot*) (for those not familiar with 1950s US pop music may not get it, and you aren't missing that much, joke wasn't that good) The screen is really small, but holds two 80x25 xterms side-by-side. cwm works nicely with the small screen. Performance is sufficient for MOST of what I do with it, but Mozilla products beat the snot out of it (like they do everything else I've tried). The newer AAOs are a little bigger, looks like they put the extra size on the keyboard, that wouldn't hurt, but I do find I can type pretty well on the little thing (my hands are not at all small, my cycling gloves are at least XL (I think 2XL). I find the trackpad usable, not great, but beats the heck out of the trackpad on a much larger Dell D620, I do not use an external mouse on it. The default CTRL-G beep on the thing is Just Wrong...big beefy BP coming out of a tiny little computer (which I often use in places where beeps are not overly welcome), so I xset the thing down to a very tiny peep. :) I got the one with the 160G HD and the big battery, I'd recommend both, though the idea of a flash-only system with the big battery could also interest me. It runs OpenBSD very well. In fact, the wireless and wired networking barely work in Windows, until I found the trick of turning off the power management on the network devices. In OpenBSD, wired Just Worked. I wish it had a serial port (tough, I suspect nothing in the netbook format ever will), I wish it had the screen res of the HP2133 (1280x768), wish the northbridge chip didn't need a fan (apparently, that's the only fan in the thing...the CPU doesn't need one. *sigh*). The thing has, on maybe three occasions, given me an ERR M on boot, which is really nuts, powering it down and back up always fixes it. In no way take this as the Acer Aspire One is the greatest thing out there. I think it was the best I could get my hands on easily when I bought it (I'm
Re: OpenBSD on first gen Asus eeePCs
On Thu, 17 Sep 2009 19:08:32 -0400 Nick Holland n...@holland-consulting.net wrote: Anyway, I've got one of the first generation Acer Aspire One machines, bought it the day the six-cell battery version became available at my local store, had it for almost a year now. I love it. Yes, I paid far more than most people are paying for them no (I deserved it, http://nickh.org/warstories/priest.html), no regrets. Heck, I once paid $400 for a 1200bps modem. It happens in this business, don't whine. Don't feel bad for that. I once payed over 2k (*cry*) for something that ppl might call a netbook today, a Sony Vaio PCG-U101... It runs OpenBSD and does its delegated job just fine. Atleast the screen is 4:3, but so is the keyboard... - Robert
Re: OpenBSD on first gen Asus eeePCs
hmm, on Thu, Sep 17, 2009 at 04:20:09PM -0400, Brad Tilley said that drives so I lay them out manually, but other than that, everything works OK (except the built-in wireless). I'm considering an Acer does the built in usb emulated sd card reader works? i can read anything from it, but writing anything big ( 100MB) freezes first the process doing the writing, then the io subsystem, and eventually the whole system. i have asked on this list before if the eeepc 701 users see this, noone answered. so perhaps it's just my darling, it is not that impossible with these cheap components. there is no bug report, because apart from the freeze, i can't report anything, can't get a ddb, and i have no idea how i could go about reporting. i made a most usb verbose kernel but there were no messages about anything related.. a real pitty actually, in usb key vs sd card clearly an sd card would be a winner. but no point in buying 8/16G cards if i can use them only read only. well, i am waiting for an arm baby anyway.. -f -- some cures are worse than the disease.
Re: OpenBSD on first gen Asus eeePCs
On Thu, Sep 17, 2009 at 8:58 PM, frantisek holop min...@obiit.org wrote: does the built in usb emulated sd card reader works? i can read anything from it, but writing anything big ( 100MB) freezes first the process doing the writing, then the io subsystem, and eventually the whole system. I've have not noticed any issues, let me dig out my 2G SD card and try writing some large files to it. I'll let you know how it turns out.
