Re: Sun Fire X4100M2 and ILOM serial console

[Landry Breuil]

On Fri, Oct 3, 2008 at 3:09 AM, Albert Chin
[EMAIL PROTECTED] wrote:
 Anyone with an X4100M2 have the serial console working for logins? I
 have OpenBSD-current running and the BIOS remote access console
 configured as follows:
  * Remote Access  [Enabled]*
  * *
  * Serial port number [COM1]   *
  *  Base Address, IRQ [3F8h, 4]*
  * Serial Port Mode   [09600 8,n,1]*
  * Flow Control   [None]   *
  * Redirection After BIOS POST[Always] *

Disable this one. This helped me on a v20z, i got the full boot log on
the serial processor.

Landry

Sun Fire X4100M2 and ILOM serial console

[Albert Chin]

Anyone with an X4100M2 have the serial console working for logins? I
have OpenBSD-current running and the BIOS remote access console
configured as follows:
  * Remote Access  [Enabled]*
  * *
  * Serial port number [COM1]   *
  *  Base Address, IRQ [3F8h, 4]*
  * Serial Port Mode   [09600 8,n,1]*
  * Flow Control   [None]   *
  * Redirection After BIOS POST[Always] *
  * Terminal Type  [VT100]  *
  * VT-UTF8 Combo Key Support  [Enabled]*
  * Sredir Memory Display Delay[No Delay]   *

When the boot loader appears, set tty com0 doesn't cause anything to
happen from the ILOM console. And, while getty runs on tty00, no login
prompt appears on the ILOM console.

-- 
albert chin ([EMAIL PROTECTED])