fwd misc@
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: Kapfhammer, Stefan <sk...@skapf.de>
Gesendet: Montag, 19. September 2016 22:33
An: Edgar Pettijohn
Betreff: AW: cuaU0 problems
I am a bit astonished, that it works
without "-d" for you. Without it
would wait for a carrier to be detected.
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: Edgar Pettijohn
Gesendet: Montag, 19. September 2016 22:01
An: misc@openbsd.org
Betreff: Re: cuaU0 problems
On 16-09-19 19:56:31, Kapfhammer, Stefan wrote:
> Hello Edgar,
>
> I have no Soekris, but Apu2 is also connected
> with a serial cable.
>
> When cable is plugged in the controlling pc
> before booting, it is to be found as /dev/cuaU???0.
>
> When I plug it in after the boot completed, it is to be
> found as /dev/cuaU3. (0/1/2 is normally int. 3G modem)
>
> Hope this helps debugging. Feedback would be fine.
Thanks for the reply. It has always worked with:
# cu -l cuaU0
when it stopped working I tried cuaU{1,2} with same result.
I suppose I may as well provide some dmesg porn.
>
>
> Freundliche Gr????e / Regards
> -stefan kapfhammer
> Originalnachricht
> Von: Edgar Pettijohn
> Gesendet: Montag, 19. September 2016 20:52
> An: misc@openbsd.org
> Betreff: cuaU0 problems
>
>
> I use a usb serial cable to talk to my soekris router. That works with
> 6.0 release but not current. I was hoping to find commits related to it
> and roll back to find what broke it, but I'm not sure where to look.
>
> Any help is appreciated.
>
> Thanks,
> --
> Edgar Pettijohn
--
Edgar Pettijohn
OpenBSD 6.0-current (GENERIC.MP) #2139: Sun Sep 18 23:16:59 MDT 2016
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel" 686-class) 798
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,D
S-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,D
EADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
real mem = 3662811136 (3493MB)
avail mem = 3580022784 (3414MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 03/26/12, BIOS32 rev. 0 @ 0xfc200, SMBIOS rev. 2.6 @
0xdae9c000 (64 entries)
bios0: vendor LENOVO version "83ET69WW (1.39 )" date 03/26/2012
bios0: LENOVO 42368J2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT
SSDT UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EHC1(S3) EHC2(S3)
HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel" 686-class) 2.50
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,D
S-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,D
EADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel" 686-class) 2.50
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,D
S-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,D
EADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel" 686-class) 2.50
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,D
S-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,D
EADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpicpu0 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1 halt),
PSS
acpicpu1 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1 halt),
PSS
acpicpu2 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1 halt),
PSS
acpicpu3 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1 halt),
PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 98 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"LEN0015" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "42T4751" serial 1690 type LION oem "SANYO"
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
acpithinkpad0: volume: 0x0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
bios0: ROM list: 0xc0000/0x10000!
cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2200, 2000, 1800, 1600,
1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1600x900
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
00:21:cc:bc:f0:47
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 16
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 17
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: msi,
MIMO 3T3R, MoW, address 24:77:03:5f:12:38
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 19
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 16
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x08: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS72323, EC2Z> SCSI3 0/direct
fixed naa.5000cca6d4cb8073
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int
18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
uhub2: device problem, disabling port 1
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/7.52 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
uhub3: device problem, disabling port 5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (5da61fb7942e784d.a) swap on sd0b dump on sd0b
uhub2: device problem, disabling port 1
umass0 at uhub2 port 1 configuration 1 interface 0 "PNY Technologies USB 2.0
FD" rev 2.00/1.0b addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <PNY, USB 2.0 FD, 8.00> SCSI2 0/direct removable
serial.154b0099270000002079
sd1: 15259MB, 512 bytes/sector, 31250432 sectors
