Hello misc@,
I have the strangest motherboard here in front of me. With the latest
amd64 snapshot it halts at the reboot command, and regularly goes to
S3 while booting (right after kernel finishes its output).
If I change "ACPI suspend state" to S1 in BIOS, system loads, the kernel
keeps writing "acpi0: PM1 stuck (en 0xfcff st 0xfcff), clearing" and
system goes immediately to shutdown (-> /etc/rc.shutdown)
When "ACPI suspend state" is S3 and systems goes to S3 while booting,
after I press the power button, it comes to life and my monitor shows
"out of range" until X is started.
Sometimes it doesn't and just keeps going to sleep when I wake it up.
I also had to disable AHCI, because bsd.rd wasn't able to boot (even
i386) and showed this (from what I was able to transcribe):
======
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: apic 2 int 19
(irq 10), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Maxtor 6Y080M0, YAR5> SCSI3 0/direct fixed
sd0: 78167MB, 512 bytes/sec, 160086528 sec total
... (smbus, uhci, kbd)
ahci0: stopping the port, softreset slot 2 was still active.
ahci0: stopping the port, softreset slot 3 was still active.
ahci0: stopping the port, softreset slot 4 was still active.
ahci0: stopping the port, softreset slot 5 was still active.
ahci0: stopping the port, softreset slot 6 was still active.
ahci0: stopping the port, softreset slot 8 was still active.
ahci0: stopping the port, softreset slot 9 was still active.
ahci0: stopping the port, softreset slot 10 was still active.
ahci0: stopping the port, softreset slot 11 was still active.
ahci0: stopping the port, softreset slot 12 was still active.
======
When I disabled ACPI in ukc, I got a protfault at the beginning:
======
...
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x8000000
inteldrm0 at vga1kernel: protection fault trap, code=0
Stopped at intr_find_mpmapping+0x28: cmpl %esi,0x10(%rax)
intr_find_mpmapping() at intr_find_mpmapping+0x28
pci_intr_map() at pci_intr_map+0xc0
inteldrm_attach() at inteldrm_attach+0xb5
config_attach() at config_attach+0x150
config_attach() at config_attach+0x150
pci_probe_device() at pci_probe_device+0x3bb
pci_enumerate_bus() at pci_enumerate_bus+0xe9
config_attach() at config_attach+0x150
mainbus_attach() at mainbus_attach+0x153
config_attach() at config_attach+0x150
end trace frame: 0xffffffff80e24e90, count: 0
ddb{0}> sh reg
ds 0x10
es 0x10
fs 0
gs 0
rdi 0
rsi 0x8
rbp 0xffffffff80e24a40
rbx 0xffffffff80e24c30
rdx 0xffff800000103fb0
rcx 0xffff80000011b090
rax 0x544e4735343944
r8 0xffffffff80e24a5c
r9 0
r10 0xffffffff80e4e000
r11 1
r12 0xffff80000011b08c
r13 1
r14 0xb
r15 0xb
rip 0xffffffff8042f988 (intr_find_mpmapping+0x28)
cs 0x8
rflags 0x10206
rsp 0xffffffff80e24a40
ss 0x10
ddb{0}> ps
* 0 -1 0 0 7 0x80200 swapper
======
Here in ddb "boot reboot" worked of course.
zzz -S and zzz -z do pretty much the same thing, including "out of
range" bug, which can be fixed by switching to X back and forth.
I'm able to test patches, but I don't have a clue what the hell is
going on. No ACPI sensors were found. What does "acpi0: PM1 stuck"
mean?
Thanks in advance.
--
Martin Pelikan
OpenBSD 4.8-current (GENERIC.MP) #759: Sun Jan 9 20:02:53 MST 2011
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2135785472 (2036MB)
avail mem = 2064916480 (1969MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe4cf0 (34 entries)
bios0: vendor Intel Corp. version "NT94510J.86A.4131.2009.1122.2232" date
11/22/2009
bios0: Intel Corporation D945GNT
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT TCPA
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) PEX0(S4) PEX1(S4)
PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3)
EHCI(S3) AC9M(S4) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 3000.30 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 2999.90 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus 2 (PEX2)
acpiprt5 at acpi0: bus 3 (PEX3)
acpiprt6 at acpi0: bus 4 (PEX4)
acpiprt7 at acpi0: bus 5 (PEX5)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: SLPB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x8000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17
(irq 255)
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 2 int
16 (irq 11), address 00:16:76:69:d4:34
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 18
(irq 255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 2 int 19
(irq 255)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17 (irq
255)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16 (irq
255)
pci5 at ppb4 bus 5
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 9)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
(irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci6 at ppb5 bus 6
xl0 at pci6 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: apic 2 int 21
(irq 9), address 00:04:75:cf:d5:07
exphy0 at xl0 phy 24: 3Com internal media interface
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080M0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: couldn't map channel 1 cmd regs
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
(irq 10)
iic0 at ichiic0
iic0: addr 0x2e 20=78 21=67 22=c1 23=c7 24=c0 25=3f 26=28 27=1a 28=af 29=0d
2a=ff 2b=ff 2c=ff 2d=ff 2e=ff 2f=ff 30=99 31=4c 32=4c 3e=01 3f=69 40=05 41=03
45=ff 47=ff 49=ff 4b=ff 4d=ff 4e=81 4f=7f 50=81 51=7f 52=81 53=7f 54=ff 55=ff
56=ff 57=ff 58=ff 59=ff 5a=ff 5b=ff 5c=02 5d=22 5e=22 5f=7a 60=8a 61=80 62=e8
63=88 64=33 65=4c 66=4c 67=38 68=2d 69=2d 6a=45 6b=41 6c=41 6d=24 6e=40 70=3d
71=28 72=1a 73=d8 75=07 7b=40 7c=24 7d=29 7e=6e 7f=57 words 00=00ff 01=00ff
02=00ff 03=00ff 04=00ff 05=00ff 06=00ff 07=00ff
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
acpi0: PM1 stuck (en 0xfcff st 0xfcff), clearing
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
Process (pid 1) got signal 31
Domain /dev/pci0:
0:0:0: Intel 82945G Host
0x0000: Vendor ID: 8086 Product ID: 2770
0x0004: Command: 0006 Status ID: 2090
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:2:0: Intel 82945G Video
0x0000: Vendor ID: 8086 Product ID: 2772
0x0004: Command: 0007 Status ID: 0090
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0x88200000/0x00080000
0x0014: BAR io addr: 0x000030c0/0x0008
0x0018: BAR mem prefetchable 32bit addr: 0x80000000/0x08000000
0x001c: BAR mem 32bit addr: 0x88280000/0x00020000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
0x00d0: Capability 0x01: Power Management
0:28:0: Intel 82801GB PCIE
0x0000: Vendor ID: 8086 Product ID: 27d0
0x0004: Command: 0007 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1
Secondary Latency Timer: 00
0x001c: I/O Base: 20 I/O Limit: 20 Secondary Status: 0000
0x0020: Memory Base: 8810 Memory Limit: 8810
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: fff1
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: ff Bridge Control: 0004
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x1 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:28:2: Intel 82801GB PCIE
0x0000: Vendor ID: 8086 Product ID: 27d4
0x0004: Command: 0007 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: 8830 Memory Limit: 8830
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: fff1
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 03 Line: ff Bridge Control: 0004
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:28:3: Intel 82801GB PCIE
0x0000: Vendor ID: 8086 Product ID: 27d6
0x0004: Command: 0007 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: 8840 Memory Limit: 8840
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: fff1
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 04 Line: ff Bridge Control: 0004
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:28:4: Intel 82801G PCIE
0x0000: Vendor ID: 8086 Product ID: 27e0
0x0004: Command: 0007 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 4 Subordinate Bus: 4
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: 8850 Memory Limit: 8850
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: fff1
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: ff Bridge Control: 0004
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:28:5: Intel 82801G PCIE
0x0000: Vendor ID: 8086 Product ID: 27e2
0x0004: Command: 0007 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 5 Subordinate Bus: 5
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: 8860 Memory Limit: 8860
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: fff1
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 02 Line: ff Bridge Control: 0004
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:29:0: Intel 82801GB USB
0x0000: Vendor ID: 8086 Product ID: 27c8
0x0004: Command: 0005 Status ID: 0280
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00003080/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 09 Min Gnt: 00 Max Lat: 00
0:29:1: Intel 82801GB USB
0x0000: Vendor ID: 8086 Product ID: 27c9
0x0004: Command: 0005 Status ID: 0280
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00003060/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
0:29:2: Intel 82801GB USB
0x0000: Vendor ID: 8086 Product ID: 27ca
0x0004: Command: 0005 Status ID: 0280
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00003040/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00
0:29:3: Intel 82801GB USB
0x0000: Vendor ID: 8086 Product ID: 27cb
0x0004: Command: 0005 Status ID: 0280
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00003020/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 04 Line: 0b Min Gnt: 00 Max Lat: 00
0:29:7: Intel 82801GB USB
0x0000: Vendor ID: 8086 Product ID: 27cc
0x0004: Command: 0006 Status ID: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0x882a0400/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 09 Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0058: Capability 0x0a: Debug Port
0:30:0: Intel 82801BA Hub-to-PCI
0x0000: Vendor ID: 8086 Product ID: 244e
0x0004: Command: 0007 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 01 Revision: e1
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 6 Subordinate Bus: 6
Secondary Latency Timer: 20
0x001c: I/O Base: 10 I/O Limit: 10 Secondary Status: 2280
0x0020: Memory Base: 8800 Memory Limit: 8800
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: fff1
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00 Line: ff Bridge Control: 0004
0x0050: Capability 0x0d: PCI-PCI
0:31:0: Intel 82801GB LPC
0x0000: Vendor ID: 8086 Product ID: 27b8
0x0004: Command: 0007 Status ID: 0210
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:31:2: Intel 82801GB SATA
0x0000: Vendor ID: 8086 Product ID: 27c0
0x0004: Command: 0007 Status ID: 02b0
0x0008: Class: 01 Subclass: 01 Interface: 8f Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR io addr: 0x000030b0/0x0008
0x0014: BAR io addr: 0x000030b8/0x0004
0x0018: BAR io addr: 0x00000400/0x0008
0x001c: BAR io addr: 0x00000000/0x0004
0x0020: BAR io addr: 0x000030a0/0x0010
0x0024: BAR mem 32bit addr: 0x882a0000/0x00000400
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
0:31:3: Intel 82801GB SMBus
0x0000: Vendor ID: 8086 Product ID: 27da
0x0004: Command: 0001 Status ID: 0280
0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00003000/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 544e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
1:0:0: Intel PRO/1000MT (82573E)
0x0000: Vendor ID: 8086 Product ID: 108b
0x0004: Command: 0007 Status ID: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 32bit addr: 0x88100000/0x00020000
0x0014: BAR empty (00000000)
0x0018: BAR io addr: 0x00002000/0x0020
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 3094
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
0x00e0: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x1 / x1
6:0:0: 3Com 3c905C 100Base-TX
0x0000: Vendor ID: 10b7 Product ID: 9200
0x0004: Command: 0017 Status ID: 0210
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 78
0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 10
0x0010: BAR io addr: 0x00001000/0x0080
0x0014: BAR mem 32bit addr: 0x88000000/0x00000080
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 10b7 Product ID: 1000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 09 Min Gnt: 0a Max Lat: 0a
0x00dc: Capability 0x01: Power Management
6:5:0: TI TSB43AB23 FireWire
0x0000: Vendor ID: 104c Product ID: 8024
0x0004: Command: 0000 Status ID: 0210
0x0008: Class: 0c Subclass: 00 Interface: 10 Revision: 00
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
pcidump: unable to read PCI_MAPREG 0x10: Operation not supported by device
0x0010: BAR empty (00000000)
pcidump: unable to read PCI_MAPREG 0x14: Operation not supported by device
0x0014: BAR empty (00000000)
pcidump: unable to read PCI_MAPREG 0x18: Operation not supported by device
0x0018: BAR empty (00000000)
pcidump: unable to read PCI_MAPREG 0x1c: Operation not supported by device
0x001c: BAR empty (00000000)
pcidump: unable to read PCI_MAPREG 0x20: Operation not supported by device
0x0020: BAR empty (00000000)
pcidump: unable to read PCI_MAPREG 0x24: Operation not supported by device
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 02 Max Lat: 04
0x0044: Capability 0x01: Power Management
