Le vendredi 21 dC)cembre 2007 C 13:20 +, Stuart Henderson a C)crit :
> On 2007/12/21 14:08, Mathieu Stumpf wrote:
> > OpenBSD/amd64 won't boot on my acer aspire 1500.
>
> Does i386 boot? If so, send a dmesg.
>
Ok, i386 boot, at least the install CD boot. Once installed OpenBSD
freeze while booting. Here are the two last line it display :
biomask ef75 netmask ef75 ttymask fff7
mtrr : Pentium Pro MTRR support
Maybe there is a problem with my memory. Would it be dangerous to
disable mtrr[1]? I wouldn't like to burn the only computer I own. ;P
Here is the full dmseg, when booting from the install CD. sd0 is an usb
key I used to record dmesg output.
OpenBSD 4.2-current (RAMDISK_CD) #583: Tue Dec 18 19:00:57 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Athlon(tm) 64 Processor 3200+ ("AuthenticAMD" 686-class,
1024KB L2 cache) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
real mem = 535326720 (510MB)
avail mem = 511590400 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/11/04, BIOS32 rev. 0 @ 0xfd470,
SMBIOS rev. 2.3 @ 0xd8010 (42 entries)
bios0: vendor Phoenix version "V1.06" date 02/11/2004
bios0: Acer Aspire 1500
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd470/0xb90
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc30/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev
0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc/0xf000 0xcf000/0x1000 0xd/0x1800
0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Broadcom BCM4306" rev 0x03 at pci0 dev 10 function 0 not configured
cbb0 at pci0 dev 11 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 10
cbb1 at pci0 dev 11 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 10
"Ricoh 5C552 Firewire" rev 0x02 at pci0 dev 11 function 2 not configured
bge0 at pci0 dev 12 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3
(0x3003): irq 9, address 00:0a:e4:4e:f6:94
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 9
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 11
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"VIA VT8233 AC97" rev 0x50 at pci0 dev 17 function 5 not configured
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x40
pcmcia1 at cardslot1
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fff5 netmask fff5 ttymask fff7
rd0: fixed, 3800 blocks
umass0 at uhub0 port 5 configuration 1 interface 0 "vendor 0x0930 USB
Flash Memory" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <, USB Flash Memory, 5.00> SCSI0 0/direct
removable
sd0: 3935MB, 501 cyl, 255 head, 63 sec, 512 byte
