Re: iwi(4) fatal firmware error

2018-04-06 Thread Ax0n
On Thu, Apr 5, 2018 at 3:37 AM, Stefan Sperling  wrote:
>
> Is this a purely cosmetic issue or does it actually prevent your
> wifi connection from working?
>
> These looks like potentially harmless errors which happen during
> association.
> Does the driver recover from these errors automatically? It should be able
> to.
>
> As to why the firmware reports such errors: We have no idea. It's a black
> box.
>

As far as I can tell, it recovers. Lately, it's been doing it at odd hours
when I'm
not actually using it, but I've never come back to it being disconnected or
anything like that. I had it next to me streaming music with Pianobar for a
few hours yesterday without any hiccups. I'll just ignore these. Thanks,
stsp!


Re: iwi(4) fatal firmware error

2018-04-05 Thread Stefan Sperling
On Wed, Apr 04, 2018 at 12:20:03PM -0500, Ax0n wrote:
> I have a Motorola ML900 which seems to be running OpenBSD with X and
> WindowMaker just fine. Every few hours it gets a group of errors within the
> span of a few seconds (about 1 second between them in /var/log/messages)
> 
> Apr  4 04:30:01 luggy /bsd: iwi0: fatal firmware error
> Apr  4 05:17:37 luggy /bsd: iwi0: fatal firmware error
> Apr  4 05:17:39 luggy /bsd: iwi0: unknown authentication state 1
> Apr  4 05:17:40 luggy /bsd: iwi0: reused group key update received from
> 60:38:e0:89:9b:dc
> Apr  4 06:51:05 luggy /bsd: iwi0: fatal firmware error
> Apr  4 06:51:06 luggy /bsd: iwi0: unknown authentication state 1
> Apr  4 06:51:07 luggy /bsd: iwi0: reused group key update received from
> 60:38:e0:89:9b:dc
> Apr  4 10:11:48 luggy /bsd: iwi0: fatal firmware error
> Apr  4 10:11:51 luggy /bsd: iwi0: unknown authentication state 1
> Apr  4 10:11:52 luggy /bsd: iwi0: reused group key update received from
> 60:38:e0:89:9b:dc
> 
> I was seeing this same behavior with 6.2-STABLE, which I just installed a
> few weeks ago.
> 
> Full dmesg (before any of the above errors) is below.

Is this a purely cosmetic issue or does it actually prevent your
wifi connection from working?

These looks like potentially harmless errors which happen during association.
Does the driver recover from these errors automatically? It should be able to.

As to why the firmware reports such errors: We have no idea. It's a black box.



iwi(4) fatal firmware error

2018-04-04 Thread Ax0n
I have a Motorola ML900 which seems to be running OpenBSD with X and
WindowMaker just fine. Every few hours it gets a group of errors within the
span of a few seconds (about 1 second between them in /var/log/messages)

Apr  4 04:30:01 luggy /bsd: iwi0: fatal firmware error
Apr  4 05:17:37 luggy /bsd: iwi0: fatal firmware error
Apr  4 05:17:39 luggy /bsd: iwi0: unknown authentication state 1
Apr  4 05:17:40 luggy /bsd: iwi0: reused group key update received from
60:38:e0:89:9b:dc
Apr  4 06:51:05 luggy /bsd: iwi0: fatal firmware error
Apr  4 06:51:06 luggy /bsd: iwi0: unknown authentication state 1
Apr  4 06:51:07 luggy /bsd: iwi0: reused group key update received from
60:38:e0:89:9b:dc
Apr  4 10:11:48 luggy /bsd: iwi0: fatal firmware error
Apr  4 10:11:51 luggy /bsd: iwi0: unknown authentication state 1
Apr  4 10:11:52 luggy /bsd: iwi0: reused group key update received from
60:38:e0:89:9b:dc

I was seeing this same behavior with 6.2-STABLE, which I just installed a
few weeks ago.

Full dmesg (before any of the above errors) is below.

OpenBSD 6.3 (GENERIC) #490: Sat Mar 24 14:31:33 MDT 2018
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.70GHz ("GenuineIntel"
686-class) 1.70 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,xTPR,PERF
real mem  = 1073168384 (1023MB)
avail mem = 1039679488 (991MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 02/23/01, BIOS32 rev. 0 @ 0xe9b30, SMBIOS rev. 2.3
@ 0xecc1a (38 entries)
bios0: vendor Insyde Software version "Version R0.16" date 02/23/2001
bios0: MOTOROLA ML900
acpi0 at bios0: rev 0
acpi0: APIC checksum error
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC BOOT
acpi0: wakeup devices SLPB(S3) LAN0(S3) USB3(S3) USB4(S3) USB5(S3) COM1(S4)
COM4(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins
, remapped to apid 1
acpiprt0 at acpi0: bus 1 (PCI1)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), FVS, 1700, 1200 MHz
acpitz0 at acpi0: critical temperature is 100 degC
acpibat0 at acpi0: BAT0 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc/0xe000 0xe4000/0x1800 0xe6000/0x1000!
0xeb000/0x5000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xa000, size 0x400
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M9" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 1 int 16
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
bktr0 at pci2 dev 3 function 0 "Brooktree BT878" rev 0x11: apic 1 int 23
bktr0: Warning - card vendor 0x (model 0x) unknown.
bktr0: Pinnacle/Miro TV,  tuner.
"Brooktree BT878 Audio" rev 0x11 at pci2 dev 3 function 1 not configured
uhci0 at pci2 dev 5 function 0 "VIA VT83C572 USB" rev 0x50: apic 1 int 16
uhci1 at pci2 dev 5 function 1 "VIA VT83C572 USB" rev 0x50: apic 1 int 17
ehci0 at pci2 dev 5 function 2 "VIA VT6202 USB" rev 0x51: apic 1 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "VIA EHCI root hub" rev 2.00/1.00
addr 1
iwi0 at pci2 dev 6 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1
int 19, address 00:15:00:0d:b5:d6
cbb0 at pci2 dev 7 function 0 "TI PCI4451 CardBus" rev 0x00: apic 1 int 16,
CardBus support disabled
cbb1 at pci2 dev 7 function 1 "TI PCI4451 CardBus" rev 0x00: apic 1 int 16,
CardBus support disabled
"TI PCI4451 FireWire" rev 0x00 at pci2 dev 7 function 2 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: apic 1
int 20, address 00:40:d0:6e:75:a0
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
puc0 at pci2 dev 9 function 0 "Oxford OX16PCI952" rev 0x00: ports: 2 com
com4 at puc0 port 0 apic 1 int 20: st16650, 32 byte fifo
com4: probed fifo depth: 16 bytes
com5 at puc0 port 1 apic 1 int 20: st16650, 32 byte fifo
com5: probed fifo depth: 16 bytes
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00
addr 1
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0