Re: like the faq 14.16.1, partition is not in my disklabel ... need help anyway
Disk: wd0 geometry: 12921/240/63 [195365520 Sectors] Offset: 0 Signature: 0xAA55 Starting Ending LBA Info: #: idC H S -C H S [ start: size ] *0: 070 1 1 - 6800 239 63 [ 63: 102831057 ] HPFS/QNX/AUX 1: 12 12270 0 1 - 12920 239 63 [ 185522400: 9843120 ] Compaq Diag. 2: A6 6801 0 1 - 12269 239 63 [ 102831120:82691280 ] OpenBSD 3: 000 0 0 -0 0 0 [ 0: 0 ] unused Yup, for NTFS you'll have to add an entry like this: --> l: 102831057 63 NTFS Then you should be able to mount it: --> mount -t ntfs -o ro /dev/wd0l /path/to/mount Mount read-only coz read-write is still experimental. If you want read-write, my understanding is that you must enable that option in the kernel and recompile. Then you can remove the "-o ro" above and mount read-write. The Compaq Diag partition must be FAT32 I assume. If yes, you can add an entry like this: --> m: 9843120 185522400 MSDOS Then mount: --> mount -o ro /dev/wd0m /path/to/mount If its not FAT32, then u'll get some error messages I guess. (The reason I mount read-only above is as a precaution in case the file system isn't FAT32 and we dont want it getting corrupted. Not sure if that's necessary, I just do things that way. Once you are sure its FAT32, you can omit to "-o ro"). Hope that helps. Rakhesh -- NetBSD/i386 3.0 + pkgsrc-current | OpenBSD/i386 3.9 http://search.gmane.org/?query=&group=gmane.os.netbsd.* (netbsd archives) http://search.gmane.org/?query=&group=gmane.os.openbsd.* (openbsd archives) http://man.netbsd.org/ | http://www.openbsd.org/cgi-bin/man.cgi (manpages)
Re: like the faq 14.16.1, partition is not in my disklabel ... need help anyway
Joachim Schipper wrote: On Thu, Jun 08, 2006 at 08:31:59PM +, Didier Wiroth wrote: Hello, My ntfs amd comaq diag. partition is not in the disklabel. I presume this means you deleted them, and now want 'em back. As they appear to have been there before the OpenBSD install, I'd have expected them to be in your disklabel. Wait a minute...how'd you get the compaq partition THERE??? (ok, that's way OT). Unfortunately I don't know how to add correctly in the disklabel. I've read the faq 14.16.1 but it only shows a modification. Here is my fdisk output, which shows id 0 the ntfs partition: Disk: wd0 geometry: 12921/240/63 [195365520 Sectors] Offset: 0 Signature: 0xAA55 Starting Ending LBA Info: #: idC H S -C H S [ start: size ] *0: 070 1 1 - 6800 239 63 [ 63: 102831057 ] HPFS/QNX/AUX 1: 12 12270 0 1 - 12920 239 63 [ 185522400: 9843120 ] Compaq Diag. 2: A6 6801 0 1 - 12269 239 63 [ 102831120:82691280 ] OpenBSD 3: 000 0 0 -0 0 0 [ 0: 0 ] unused Here is current my disklabel: 16 partitions: # sizeoffset fstype [fsize bsize cpg] a: 2097648 102831120 4.2BSD 2048 16384 328 # Cyl 102015 -104095 b: 1024128 104928768swap # Cyl 104096 -105111 c: 195371568 0 unused 0 0 # Cyl 0 -193820 d: 4194288 105952896 4.2BSD 2048 16384 328 # Cyl 105112 -109272 e: 1024128 110147184 4.2BSD 2048 16384 328 # Cyl 109273 -110288 f: 4194288 71312 4.2BSD 2048 16384 328 # Cyl 110289 -114449 g: 10486224 115365600 4.2BSD 2048 16384 328 # Cyl 114450 -124852 h: 4194288 125851824 4.2BSD 2048 16384 328 # Cyl 124853 -129013 i: 2097648 130046112 4.2BSD 2048 16384 328 # Cyl 129014 -131094 j: 3072384 132143760 4.2BSD 2048 16384 328 # Cyl 131095 -134142 k: 50306256 135216144 4.2BSD 2048 16384 328 # Cyl 134143 -184049 What do I have to add to disklabel to be able to access the ntfs and the compaq diag partition? For ntfs something like: l: 102831057 63 unknown # Cyl ??? I would really appreciate some help. with what? You got it right there! Do disklabel -E, you won't have to worry about the cyl part. :) You probably want type to be "ntfs". Thank you very much ! Some noteworthy points: 1. Looks like you ran out of space in the disklabel (or in the device namespace, or whatever): don't define this many disklabel slices if you want to see the other partitions (which are typically numbered from i). [I'm not 100% sure I'm correct here; please flame me, with the correct answer if possible, if this is not the case.] Grabbing the marshmallows and a stick here... Yes, non-OpenBSD partitions which are recognized at install time are typically listed as partitions "i" and up, but there is NOTHING sacred about this. "a", "b" and "c" are sacred..don't misuse them. "d" through "p" can be used however you wish. Make "d" DOS. Make "p" your /usr partition. Whatever. consider yourself flamed. :) 2. NTFS is not supported in GENERIC. This usually means the implementation isn't really ready for prime time yet; you could build a custom kernel, if you know what you are doing and have read most, if not all, of FAQ 5.*. right. "man -k ntfs" 3. I don't know what you want to do with the Compaq diag partition, but it might not be too useful. agreed. If you aren't planning on USING a partition, don't bother putting it in disklabel. On the other hand, might be fun to find what is in that compaq partition. (no idea why, but I've never looked closely. Just a mislabeled msdos partiton, as I recall). Nick.
Re: like the faq 14.16.1, partition is not in my disklabel ... need help anyway
Joachim Schipper wrote: > > On Thu, Jun 08, 2006 at 08:31:59PM +, Didier Wiroth wrote: > > Hello, > > My ntfs amd comaq diag. partition is not in the disklabel. > > Unfortunately I don't know how to add correctly in the disklabel. > > I've read the faq 14.16.1 but it only shows a modification. > > > > Here is my fdisk output, which shows id 0 the ntfs partition: > > > > Disk: wd0 geometry: 12921/240/63 [195365520 Sectors] > > Offset: 0 Signature: 0xAA55 > > Starting Ending LBA Info: > > #: idC H S -C H S [ start: size ] > > > > *0: 070 1 1 - 6800 239 63 [ 63: 102831057 ] > HPFS/QNX/AUX > > 1: 12 12270 0 1 - 12920 239 63 [ 185522400: 9843120 ] > Compaq Diag. > > 2: A6 6801 0 1 - 12269 239 63 [ 102831120:82691280 ] OpenBSD > > 3: 000 0 0 -0 0 0 [ 0: 0 ] unused > > > > Here is current my disklabel: > > 16 partitions: > > # sizeoffset fstype [fsize bsize cpg] > > a: 2097648 102831120 4.2BSD 2048 16384 328 # > Cyl 102015 -104095 > > b: 1024128 104928768swap # > Cyl 104096 -105111 > > c: 195371568 0 unused 0 0 # > Cyl 0 -193820 > > d: 4194288 105952896 4.2BSD 2048 16384 328 # > Cyl 105112 -109272 > > e: 1024128 110147184 4.2BSD 2048 16384 328 # > Cyl 109273 -110288 > > f: 4194288 71312 4.2BSD 2048 16384 328 # > Cyl 110289 -114449 > > g: 10486224 115365600 4.2BSD 2048 16384 328 # > Cyl 114450 -124852 > > h: 4194288 125851824 4.2BSD 2048 16384 328 # > Cyl 124853 -129013 > > i: 2097648 130046112 4.2BSD 2048 16384 328 # > Cyl 129014 -131094 > > j: 3072384 132143760 4.2BSD 2048 16384 328 # > Cyl 131095 -134142 > > k: 50306256 135216144 4.2BSD 2048 16384 328 # > Cyl 134143 -184049 > > > > > > What do I have to add to disklabel to be able to access the > ntfs and the compaq diag partition? > > > > For ntfs something like: > > l: 102831057 63 unknown # Cyl ??? > > > > I would really appreciate some help. > > > > Thank you very much ! > > Some noteworthy points: > 1. Looks like you ran out of space in the disklabel (or in the > device namespace, or whatever): don't define this many disklabel slices > if you want to see the other partitions (which are typically numbered > from i). [I'm not 100% sure I'm correct here; please flame me, with the > correct answer if possible, if this is not the case.] 16 partitions. That's a through p inclusive. (also referred to as 15 partitions (excluding c)) > 2. NTFS is not supported in GENERIC. This usually means the > implementation isn't really ready for prime time yet; you could build a > custom kernel, if you know what you are doing and have read most, if not > all, of FAQ 5.*. There are screweys, particularly on writitng. I think Windows gets burned occasionally. > 3. I don't know what you want to do with the Compaq diag > partition, but it might not be too useful. I think it's an msdos partition Called something different to keep Windows out of it. Flames invited if I guessed wrong. > > Joachim
Re: like the faq 14.16.1, partition is not in my disklabel ... need help anyway
On Thu, Jun 08, 2006 at 08:31:59PM +, Didier Wiroth wrote: > Hello, > My ntfs amd comaq diag. partition is not in the disklabel. > Unfortunately I don't know how to add correctly in the disklabel. > I've read the faq 14.16.1 but it only shows a modification. > > Here is my fdisk output, which shows id 0 the ntfs partition: > > Disk: wd0 geometry: 12921/240/63 [195365520 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: idC H S -C H S [ start: size ] > > *0: 070 1 1 - 6800 239 63 [ 63: 102831057 ] HPFS/QNX/AUX > 1: 12 12270 0 1 - 12920 239 63 [ 185522400: 9843120 ] Compaq Diag. > 2: A6 6801 0 1 - 12269 239 63 [ 102831120:82691280 ] OpenBSD > 3: 000 0 0 -0 0 0 [ 0: 0 ] unused > > Here is current my disklabel: > 16 partitions: > # sizeoffset fstype [fsize bsize cpg] > a: 2097648 102831120 4.2BSD 2048 16384 328 # Cyl 102015 > -104095 > b: 1024128 104928768swap # Cyl 104096 > -105111 > c: 195371568 0 unused 0 0 # Cyl 0 -193820 > d: 4194288 105952896 4.2BSD 2048 16384 328 # Cyl 105112 > -109272 > e: 1024128 110147184 4.2BSD 2048 16384 328 # Cyl 109273 > -110288 > f: 4194288 71312 4.2BSD 2048 16384 328 # Cyl 110289 > -114449 > g: 10486224 115365600 4.2BSD 2048 16384 328 # Cyl 114450 > -124852 > h: 4194288 125851824 4.2BSD 2048 16384 328 # Cyl 124853 > -129013 > i: 2097648 130046112 4.2BSD 2048 16384 328 # Cyl 129014 > -131094 > j: 3072384 132143760 4.2BSD 2048 16384 328 # Cyl 131095 > -134142 > k: 50306256 135216144 4.2BSD 2048 16384 328 # Cyl 134143 > -184049 > > > What do I have to add to disklabel to be able to access the ntfs and the > compaq diag partition? > > For ntfs something like: > l: 102831057 63 unknown # Cyl ??? > > I would really appreciate some help. > > Thank you very much ! Some noteworthy points: 1. Looks like you ran out of space in the disklabel (or in the device namespace, or whatever): don't define this many disklabel slices if you want to see the other partitions (which are typically numbered from i). [I'm not 100% sure I'm correct here; please flame me, with the correct answer if possible, if this is not the case.] 2. NTFS is not supported in GENERIC. This usually means the implementation isn't really ready for prime time yet; you could build a custom kernel, if you know what you are doing and have read most, if not all, of FAQ 5.*. 3. I don't know what you want to do with the Compaq diag partition, but it might not be too useful. Joachim
like the faq 14.16.1, partition is not in my disklabel ... need help anyway
Hello, My ntfs amd comaq diag. partition is not in the disklabel. Unfortunately I don't know how to add correctly in the disklabel. I've read the faq 14.16.1 but it only shows a modification. Here is my fdisk output, which shows id 0 the ntfs partition: Disk: wd0 geometry: 12921/240/63 [195365520 Sectors] Offset: 0 Signature: 0xAA55 Starting Ending LBA Info: #: idC H S -C H S [ start: size ] *0: 070 1 1 - 6800 239 63 [ 63: 102831057 ] HPFS/QNX/AUX 1: 12 12270 0 1 - 12920 239 63 [ 185522400: 9843120 ] Compaq Diag. 2: A6 6801 0 1 - 12269 239 63 [ 102831120:82691280 ] OpenBSD 3: 000 0 0 -0 0 0 [ 0: 0 ] unused Here is current my disklabel: 16 partitions: # sizeoffset fstype [fsize bsize cpg] a: 2097648 102831120 4.2BSD 2048 16384 328 # Cyl 102015 -104095 b: 1024128 104928768swap # Cyl 104096 -105111 c: 195371568 0 unused 0 0 # Cyl 0 -193820 d: 4194288 105952896 4.2BSD 2048 16384 328 # Cyl 105112 -109272 e: 1024128 110147184 4.2BSD 2048 16384 328 # Cyl 109273 -110288 f: 4194288 71312 4.2BSD 2048 16384 328 # Cyl 110289 -114449 g: 10486224 115365600 4.2BSD 2048 16384 328 # Cyl 114450 -124852 h: 4194288 125851824 4.2BSD 2048 16384 328 # Cyl 124853 -129013 i: 2097648 130046112 4.2BSD 2048 16384 328 # Cyl 129014 -131094 j: 3072384 132143760 4.2BSD 2048 16384 328 # Cyl 131095 -134142 k: 50306256 135216144 4.2BSD 2048 16384 328 # Cyl 134143 -184049 What do I have to add to disklabel to be able to access the ntfs and the compaq diag partition? For ntfs something like: l: 102831057 63 unknown # Cyl ??? I would really appreciate some help. Thank you very much ! Kind regards Didier