Hi folks,
Since i upgraded our firewall to 4.1, i have severe problems with the
Marvell 88E1011 Gigabit interface. netstat shows thousands of ierrs
after 15 minutes of uptime. No Problems with 4.0. Is this a known issue?
I found only one relevant posting
http://archives.neohapsis.com/archives/openbsd/2007-06/0744.html but
this guy reported "no carrier".
Any ideas?
# ifconfig sk0
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0c:6e:d8:b0:d8
media: Ethernet 100baseTX full-duplex
status: active
inet6 fe80::20c:6eff:fed8:b0d8%sk0 prefixlen 64 scopeid 0x1
I noticed that the full-duplex light on the switch is flashing, but
trying to swith sk0 ti half-duplex only resulted in:
# ifconfig sk0 mediaopt half-duplex
ifconfig: SIOCSIFMEDIA: Invalid argument
But then again, automatic media selection worked without problems on 4.0.
# uptime
4:59PM up 7 mins, 1 user, load averages: 1.45, 0.92, 0.44
# netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts
Oerrs Colls
lo0 33224 <Link> 254 0 254
0 0
lo0 33224 127/8 127.0.0.1 254 0 254
0 0
lo0 33224 ::1/128 ::1 254 0 254
0 0
lo0 33224 fe80::%lo0/ fe80::1%lo0 254 0 254
0 0
sk0 1500 <Link> 00:0c:6e:d8:b0:d8 214243 2540 204093
0 0
sk0 1500 fe80::%sk0/ fe80::20c:6eff:fe 214243 2540 204093
0 0
xl0 1500 <Link> 00:04:76:a0:43:bd 26904 0 14979
0 0
xl0 1500 fe80::%xl0/ fe80::204:76ff:fe 26904 0 14979
0 0
xl0 1500 192.168.34/ 192.168.34.100 26904 0 14979
0 0
pflog0* 33224 <Link> 0 0 5558
0 0
enc0* 1536 <Link> 0 0 0
0 0
vlan0 1500 <Link> 00:0c:6e:d8:b0:d8 98660 0 98595
0 0
vlan0 1500 fe80::%vlan fe80::20c:6eff:fe 98660 0 98595
0 0
vlan0 1500 134.102.176 134.102.176.250 98660 0 98595
0 0
vlan1 1500 <Link> 00:0c:6e:d8:b0:d8 79384 0 83536
0 0
vlan1 1500 fe80::%vlan fe80::20c:6eff:fe 79384 0 83536
0 0
vlan1 1500 134.102.186 134.102.186.20 79384 0 83536
0 0
vlan2 1500 <Link> 00:0c:6e:d8:b0:d8 8303 0 26
0 0
vlan2 1500 fe80::%vlan fe80::20c:6eff:fe 8303 0 26
0 0
vlan2 1500 172.21/16 172.21.1.8 8303 0 26
0 0
vlan3 1500 <Link> 00:0c:6e:d8:b0:d8 27716 0 21810
0 0
vlan3 1500 fe80::%vlan fe80::20c:6eff:fe 27716 0 21810
0 0
vlan3 1500 192.168.33/ 192.168.33.250 27716 0 21810
0 0
vlan5 1500 <Link> 00:0c:6e:d8:b0:d8 186 0 135
0 0
vlan5 1500 fe80::%vlan fe80::20c:6eff:fe 186 0 135
0 0
vlan5 1500 192.168.32/ 192.168.32.250 186 0 135
0 0
tun0 1500 <Link> 0 0 0
0 0
tun0 1500 10.8.0.1/32 10.8.0.1 0 0 0
0 0
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.60GHz ("GenuineIntel" 686-class) 2.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1072459776 (1047324K)
avail mem = 971186176 (948424K)
using 4278 buffers containing 53747712 bytes (52488K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/12/03, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf04a0 (68 entries)
bios0: ASUSTeK Computer Inc. P4P800
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5100/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82865G/PE/P CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage 128 Pro TF" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci2 at ppb1 bus 2
skc0 at pci2 dev 5 function 0 "3Com 3c940" rev 0x12, Yukon (0x1): irq 11
sk0 at skc0 port A, address 00:0c:6e:d8:b0:d8
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
xl0 at pci2 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 11,
address 00:04:76:a0:43:bd
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <DMA FD>
wd0: 1-sector PIO, LBA, 495MB, 1014048 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq
11, ICH5 AC97
ac97: codec id 0x41445375 (Analog Devices AD1985)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
PXE boot MAC address 00:04:76:a0:43:bd, interface xl0
nfs_boot: using interface xl0, with revarp & bootparams
nfs_boot: client_addr=192.168.34.100
nfs_boot: server_addr=192.168.34.1 hostname=frw1
root on 192.168.34.1:/data/root/frw1
nfs_boot: mountd swap, error=13
WARNING: no swap
swapmount: no device
--
Heinrich Rebehn
University of Bremen
Physics / Electrical and Electronics Engineering
- Department of Telecommunications -
Phone : +49/421/218-4664
Fax : -3341
