Re: vmm error mesg since upgrade to 6.9

2021-05-04 Thread Mischa
On 4 May at 15:44, Dave Voutila wrote: > > Dave Voutila writes: > > > > I've managed to reproduce it on my end using vmd(8) from 6.9 and a > > config similar to what you and Holger are using. I have a few hunches > > and looking into it. > > > > An errata for 6.9 was released addressing the

Re: vmm error mesg since upgrade to 6.9

2021-05-04 Thread Dave Voutila
Dave Voutila writes: > > I've managed to reproduce it on my end using vmd(8) from 6.9 and a > config similar to what you and Holger are using. I have a few hunches > and looking into it. > An errata for 6.9 was released addressing the underlying issue. As this is specific to vmd(8), this only

Re: vmm error mesg since upgrade to 6.9

2021-05-02 Thread Mischa Peters
> On 2 May 2021, at 14:56, Dave Voutila wrote: > >  > Mischa Peters writes: > On 2 May 2021, at 14:25, Dave Voutila wrote: >>> >>>  >>> Mischa writes: >>> Interestingly I am seeing the same on my 6.9 hosts, except the host running -current. >>> >>> Hmm. -current

Re: vmm error mesg since upgrade to 6.9

2021-05-02 Thread Dave Voutila
Mischa Peters writes: >> On 2 May 2021, at 14:25, Dave Voutila wrote: >> >>  >> Mischa writes: >> >>> >>> Interestingly I am seeing the same on my 6.9 hosts, except the host running >>> -current. >> >> Hmm. -current has some small changes to virtio emulation, specifically >> fixing some bad

Re: vmm error mesg since upgrade to 6.9

2021-05-02 Thread Mischa Peters
> On 2 May 2021, at 14:25, Dave Voutila wrote: > >  > Mischa writes: > >> >> Interestingly I am seeing the same on my 6.9 hosts, except the host running >> -current. > > Hmm. -current has some small changes to virtio emulation, specifically > fixing some bad casts I found [1]. That might

Re: vmm error mesg since upgrade to 6.9

2021-05-02 Thread Dave Voutila
Mischa writes: > > Interestingly I am seeing the same on my 6.9 hosts, except the host running > -current. Hmm. -current has some small changes to virtio emulation, specifically fixing some bad casts I found [1]. That might explain the difference with -current. > The hosts are similar in

Re: vmm error mesg since upgrade to 6.9

2021-05-02 Thread Holger Glaess
hi on host /etc 3>cat hostname.bridge1 rdomain 10 group vpn add vether1 #add em1 up /etc 4>cat vm.conf switch "vswitch1" {     interface bridge1     rdomain 10     enable     } vm "vpngw" {     owner _vmd     disk "/home/vmd/disk0.qcow2"     interface {   

Re: vmm error mesg since upgrade to 6.9

2021-05-02 Thread Mischa
On 2 May at 13:04, Dave Voutila wrote: > Holger Glaess writes: > > > hi > > > > > > i did the upgrade von 6.8 to 6.9 . > > > > > > after reboot i get in my messages log > > > > > > vmd[56]: vionet_enq_rx: descriptor too small for packet data > > > > > > i run only one vm on my box, this is also

Re: vmm error mesg since upgrade to 6.9

2021-05-02 Thread Dave Voutila
Holger Glaess writes: > hi > > > i did the upgrade von 6.8 to 6.9 . > > > after reboot i get in my messages log > > > vmd[56]: vionet_enq_rx: descriptor too small for packet data > > > i run only one vm on my box, this is also upgraded to 6.9. > > > how can i fix this ? > > Can you share some

vmm error mesg since upgrade to 6.9

2021-05-02 Thread Holger Glaess
hi i did the upgrade von 6.8 to 6.9 . after reboot i get in my messages log vmd[56]: vionet_enq_rx: descriptor too small for packet data i run only one vm on my box, this is also upgraded to 6.9. how can i fix this ? Holger