On Thu, Jul 09, 2015 at 04:36:33PM -0700, Seth wrote:
I'm trying to use the following statement in /etc/dhclient.conf
supersede domain-name-servers [127.0.0.1]:40;
don't wrap the ip address in square [] brackets.
should clear it up
--ryan
But when the machine boots and the network
I see, now, how my post was misinterpreted.
2015/07/09 9:26 Joel Rees joel.r...@gmail.com:
Hmm. Should have looked at the contributions page before I posted. I
was reading Gold and thinking Iridium.
A corporate contribution of between 25,000 and 50,000 (the Gold level
that Microsoft
I've also tried a fresh install of i386 5.8 snapshot to be sure there's
no leftover something that causes these issues, the situation is the
same.
Works on current amd64.
With different files I can get couple of seconds of playback and then it
crashes again.
Hello misc,
I'm trying to recompile mplayer with debug support to provide useful
backtrace, but this is slow netbook so it takes time. (/rest filesystem
full is message from one compile run in dmesg)
trying to get further ...
after countless cpu cycles on my little Atom and running out of
Check out this on fossforce...
http://fossforce.com/2015/07/microsoft-writes-check-free-oscon-passes/#more-1253135
I thought this online blog was only interestedin linux, but apparently its
focus is much larger.
On Fri, 10 Jul 2015, Joel Rees wrote:
I see, now, how my post was
I'm having a bit of trouble with audio on my 5.7 box (Thinkpad T430.)
Audio is just a bit too quiet to be comfortable even when I have
everything maxed out. I had a similar problem on Linux and I was able to
create a boost device to feed audio through before it went to the
speakers, could I do
-rw-r--r-- 1 root wheel
On Fri, Jul 10, 2015 at 4:00 PM, Jan Vlach ja...@volny.cz wrote:
Hi,
what's the output of
ls -l /etc/ospfd.conf
Jan
On Fri, Jul 10, 2015 at 03:54:50PM +0430, Reza Kakhki wrote:
Yesterday i tried to enable OSPF routing on OpenBSD 5.7 . so i created
Hi,
what's the output of
ls -l /etc/ospfd.conf
Jan
On Fri, Jul 10, 2015 at 03:54:50PM +0430, Reza Kakhki wrote:
Yesterday i tried to enable OSPF routing on OpenBSD 5.7 . so i created
/etc/ospfd.conf and added this codes to it ( just for test )
routet-id 127.0.0.1
-- this looks like
-Original Message-
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of Edgar
Pettijohn
Sent: Friday, July 10, 2015 7:32 PM
To: misc@openbsd.org
Subject: Re: httpd stops accepting connections after a few hours on current
On 07/08/15 22:04, Theodore Wynnychenko wrote:
On 07/08/15 22:04, Theodore Wynnychenko wrote:
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of Edgar
Pettijohn
Sent: Wednesday, July 08, 2015 8:52 PM
To: misc@openbsd.org
Subject: Re: httpd stops accepting connections after a few hours on current
On 07/08/15 12:15,
On 07/10/15 19:32, Edgar Pettijohn wrote:
On 07/08/15 22:04, Theodore Wynnychenko wrote:
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On
Behalf Of Edgar
Pettijohn
Sent: Wednesday, July 08, 2015 8:52 PM
To: misc@openbsd.org
Subject: Re: httpd stops accepting connections after a
Hi,
I have a l2tp/IPsec VPN working on OpenBSD 5.6 with npppd. I have a
couple of questions about npppd
1) How come it's not possible to the address assigned to a CARP
interface on the OpenBSD host
Here's what's logged when I try to connect using the IP address
assigned to the CARP interface (if
Yesterday i tried to enable OSPF routing on OpenBSD 5.7 . so i created
/etc/ospfd.conf and added this codes to it ( just for test )
routet-id 127.0.0.1
area 0.0.0.0 {
interface em0
}
but after type /etc/rc.d/ospfd -fd start i got this logs in terminal
doing _rc_parse_conf
doing _rc_quirks
Hello,
On Tue, 09 Jun 2015, Theo de Raadt wrote:
entry point at 0x1000160 [7205c766, 3404, 24448b12, 1080a304]
== At this point the system reboots. No further messages.
Your kernel is probably too large. A limitation in the bootblocks.
Do you mean the kernel with the
Quoting Otto Moerbeek o...@drijf.net:
On Fri, Jul 10, 2015 at 04:04:04PM +, Vijay Sankar wrote:
My objective for this weekend was to follow the new dpb and build ports
without using sudo. So I was hoping to upgrade to the latest snapshot on a
system that I use for tests.
The test system
On 07/10/15 13:15, Jan Stary wrote:
Please show the output of mixerctl -av
This is hardly 'maxed out'.
Same for the other settings.
Sorry about that, I'd asked in IRC about it and was given a few devices
to try, and they didn't work. I know for sure that a couple got reset at
least (I
On Fri, Jul 10, 2015 at 04:04:04PM +, Vijay Sankar wrote:
My objective for this weekend was to follow the new dpb and build ports
without using sudo. So I was hoping to upgrade to the latest snapshot on a
system that I use for tests.
The test system has a 2TB drive and it had two 300GB
On Jul 10 06:01:17, t...@parlementum.net wrote:
I'm having a bit of trouble with audio on my 5.7 box (Thinkpad T430.) Audio
is just a bit too quiet to be comfortable even when I have everything maxed
out. I had a similar problem on Linux and I was able to create a boost
device to feed audio
My objective for this weekend was to follow the new dpb and build
ports without using sudo. So I was hoping to upgrade to the latest
snapshot on a system that I use for tests.
The test system has a 2TB drive and it had two 300GB partitions in it
for ports and vm; and a 120GB SSD for the OS
Make the config not world readable/writeable.
Den 10 jul 2015 13:27 skrev Reza Kakhki rezakakhki...@gmail.com:
Yesterday i tried to enable OSPF routing on OpenBSD 5.7 . so i created
/etc/ospfd.conf and added this codes to it ( just for test )
routet-id 127.0.0.1
area 0.0.0.0 {
Hello,
I have a gateway machine OpenBSD 5.5 that won't not initiate connection
to peer. The one way to establish VPN tunnel is if peer ping IP in my
subnet.
in pf.conf
IpsecClients={ 173.16.2.20/32, 139.19.10.51/32 }
IpsecHosts={ 192.16.38.24/27 }
# IPSec VPN tunnel
pass in on $OUTSIDE
good advice.
thanks Michael.
tail /var/log/maillog is
Jul 11 15:20:52 aoiyuma postfix/smtpd[9635]: warning: smtputf8_enable is
true, but EAI support is not
compiled in
Jul 11 15:20:52 aoiyuma postfix/proxymap[20250]: warning: smtputf8_enable
is true, but EAI support is not
compiled in
Jul 11
On 2015-07-10 16:53, Tuyosi Takesima wrote:
Hi ,all .
i can send and recieve mail by using mail server on rental server .
namely send to tuy...@openbsd.link
recieve from tuy...@openbsd.link
but now state , i cannot send mail to x...@gmail.com becase of relay
host
what
On Sat, Jul 11, 2015 at 05:53:42AM +0900, Tuyosi Takesima wrote:
i can send and recieve mail by using mail server on rental server .
namely send to tuy...@openbsd.link
recieve from tuy...@openbsd.link
but now state , i cannot send mail to x...@gmail.com becase of
Hi ,all .
i can send and recieve mail by using mail server on rental server .
namely send to tuy...@openbsd.link
recieve from tuy...@openbsd.link
but now state , i cannot send mail to x...@gmail.com becase of relay host
what should i do next ?
my /etc/postfix/main.cf
thanks trondd .
http://mxtoolbox.com/diagnostic.aspx says
smtp:mail.openbsd.link Monitor This
Unable to connect after 15 seconds.
TestResult
SMTP ConnectFailed To ConnectMore Info
Session Transcript:
Connecting to 157.7.244.194
7/10/2015
26 matches
Mail list logo
