Try in command promot
Machine gop 3
Boot
чт, 22 авг. 2019 г., 13:05 Jona Joachim :
> Hi,
>
> I've been trying to install OpenBSD on this HP EliteBook Folio 1040 G2
> in EFI mode for some time now but I'm always presented with a corrupt
> console.
>
> I took a picture which you can find here:
>
How did you run the command? As your user or with doas/or as root?
I have seen problems with permissions with pkg_check as my user can not read
all the directories that pkg_check are trying to read.
/Isak
>
> From: Jordon
> Sent: Thu Aug 22 14:40:28
Thanks - that fixed it. I figured there was some cleanup or maintenance that
needed to be done - i just didn't know how to do it. In running pkg_check, i
did get a lot of these:
--- .libs9-partial-gcc-libs-8.3.0p1.1 ---
lib should exist
lib is not a directory
Thanks - that fixed it. I figured there was some cleanup or maintenance that
needed to be done - i just didn't know how to do it. In running pkg_check, i
did get a lot of these:
--- .libs9-partial-gcc-libs-8.3.0p1.1 ---
lib should exist
lib is not a directory
Hi,
I have the following machine with two interfaces like this:
root@fw:~ # cat /etc/hostname.vlan10
vlan 10 vlandev vio0
inet 10.0.0.1 255.255.255.0 NONE
up
root@fw:~ # cat /etc/hostname.vlan23
vlan 23 vlandev vio0
inet 172.30.133.83 255.255.255.240 NONE
!route add 10.0.0.10/32 172.30.133.84
Peter J. Philipp wrote:
> Hi,
>
> On the NANOG list there is a thread about something synflooding:
> https://mailman.nanog.org/pipermail/nanog/2019-August/102713.html
>
> Most of my hosts are synflooded, and I was wondering why my OpenBSD
> hosts don't show any SYN_RECV states in a netstat
On 2019-08-21, Jordon wrote:
> A few years ago I attempted to make a port of obs-studio for openbsd.
> With help from this mailing list, I got something that ran but
> wasn\xe2\x80\x99t
> particularly useful, as audio and video sources were not there.
erm, audio and video sources did work,
Hi,
I might be missing something right here
I have the output of "route show" attached, because I cannot paste it in
here in a formatted form.
This is super annoying.
Just wanna get the damn thing running.
Regards,
Stephan
On 8/19/19 10:33 AM, Bastien Durel wrote:
> Le dimanche 18
Hello,
xenodm is having issues while starting a dwm session,
I'm using a Thinkpad x220, OpenBSD 6.5
dmesg
OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13 14:48:43 MDT 2019
dera...@amd64.openbsd.org
:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4156157952 (3963MB)
avail mem = 4020576256
Are you using a modified xorg.conf.d, and mind showing your xsession?
On Thu, Aug 22, 2019 at 2:58 PM kaletaa wrote:
> Hello,
> xenodm is having issues while starting a dwm session,
> I'm using a Thinkpad x220, OpenBSD 6.5
>
> dmesg
>
>
> OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13
Yeah, back before Skylake was supported. I did get a pre-Skylake system
(broadwell, i think) that is the openbsd system i am using now. I did get it
performing ok, but it was lacking some features. I think it was audio/video
sources but i could be wrong. That was a couple years ago! :)
Hi,
Wonder if anyone would know the answer for this.
I try to figure out what is the entry needed in the snmpd.conf for the
specific display that would show in mrtg when the scan is done.
In short the display as
Max Speed: 1000.0 Mbits/s
to be display as for example
Max Speed:
Radek
I’ve found that fast networking is actually CPU & memory intensive.
Pentium 4 and Xeon's are increasingly a necessity for stable firewalls in my
opinion.
Keep in mind OpenBSD is a monolithic kernel & isn’t a one to one ratio with a
commercial router.
What are your context switches &
I do the package upgrades as root (‘su -‘) and I’m pretty sure I was doing the
pkg_check commands in the same terminal this morning.
> On Aug 22, 2019, at 11:00, Isak Holmstroem wrote:
>
> How did you run the command? As your user or with doas/or as root?
>
> I have seen problems with
14 matches
Mail list logo