Re: 6.6 on t400

I had some similar troubles with my T400 when installing 6.6 a couple of months back. I had to ensure that I was using integrated graphics, and it worked fine. So you could try altering the bios graphics setting (under Config/Display) to "Integrated Graphics". Also ensure you have run fw_update.

Re: IPsec and MTU / fragmentation

If a client and a server set up a new conversation over tcp. They both have an MTU of 1500 and DF=1 How will you fragment this, even being a L3 tunnel? /S On Tue, 11 Feb 2020 at 08:22, Janne Johansson wrote: > Den mån 10 feb. 2020 kl 20:53 skrev Simen Stavdal : > >> I think the more complete

Re: IPsec and MTU / fragmentation

Den tis 11 feb. 2020 kl 10:25 skrev Simen Stavdal : > tunnel will be able to fragment all incoming ip before sending it into the > ipsec, which will not fragment for you. > The clients will not have to change, nor any other protocol that sends ip > via the double-tunnel.> > > If a client and a

Re: aucat - join two mono files into stereo

> > There is a multi-channel bus. Inputs files (-i) are written to the bus > > and output files (-o) are read from the bus. Bus channels are numbered > > from 0 to the greatest channel of all files. The per-file -c option > > specifies which channels of the bus the file will provide or consume. >

Re: IPsec and MTU / fragmentation

On 2020-02-11, Simen Stavdal wrote: > tunnel will be able to fragment all incoming ip before sending it into the > ipsec, which will not fragment for you. > The clients will not have to change, nor any other protocol that sends ip > via the double-tunnel.> > > If a client and a server set up a

Re: Catastrophic

Yes the machine runs without X. I can scp a copy of my dmesg to a remote machine and go from there. Will be in touch soon. Thank you. On Sun, Feb 9, 2020 at 3:06 PM Stuart Longland wrote: > On 27/1/20 11:59 pm, Justin Noor wrote: > > I am unable to send any log files or anything. I had to send

Re: ssh: probable bug in ssh -current

> Sent: Monday, February 03, 2020 at 2:28 AM > From: "Damien Miller" > To: "Aham Brahmasmi" > Cc: Misc > Subject: Re: ssh: probable bug in ssh -current > > On Fri, 31 Jan 2020, Aham Brahmasmi wrote: > > > Bug: > > When the client connects to the server, they use the ed25519-cert to > >

bsd.rd 6.6 for Octeon?

I've tried downloading bsd.rd for octeon for both 6.6 and snapshots. However, when I actually boot from it, I seem to get 6.5 instead of 6.6 for both the boot message and the sets it looks for over HTTP. The file verifies with signify using the SHA256.sig file using the 6.6 key. I've tried

Re: bsd.rd 6.6 for Octeon?

I think you are using the old boot method, which boots bsd from msdos. The new method has a bootblock, which loads bsd from the filesystem. Meaning you didn't read the notes, and your setenv's are wrong. Lars Noodén wrote: > I've tried downloading bsd.rd for octeon for both 6.6 and

6.6 on t400

Hey all, I am trying to get openbsd on a t400 laptop The installation process works great but when it starts X the screen is just flickering and X is not working at all, is anyone running 6.6 on t400 and have any tips ? Thanks! Sincerely flipchan