wg(4) listen on a specific interface / address

2020-10-27 Thread Pierre Emeriaud
Howdy misc@, I have a fairly complicated setup with lots of interfaces, a couple of rdomains etc. I'd like wireguard to listen only on an IP address, not all. But if my understanding of ifconfig(8) is correct, this doesn't seem possible currently: wgport port Set the UDP port that

Re: OpenBSD 6.8 release boot stuck on Intel NUC NUC7PJYH

2020-10-27 Thread Sven Wolf
Hi Fabian, the today posted patch from Marc Kettenis works on my system - https://marc.info/?l=openbsd-tech=160383074317608=2 For test purposes you can download my build BOOTX64.EFI from http://mailinglist.fusion-zone.net/BOOTX64.EFI Just replace it in your EFI partition. Please make a

Re: search contains unknown domain in resolv.conf

2020-10-27 Thread Andreas X
ignore domain-search; supersede domain-name mail.myserver.tld; supersede domain-search mail.myserver.tld; None of these lines have worked in dhclient.conf Anything else I could try? Thank you. 27 Ekim 2020 Salı tarihinde Otto Moerbeek yazdı: > On Tue, Oct 27, 2020 at 02:32:46PM +0300,

Re: snapshot boot fails with error "entry point at 0x1001000"

2020-10-27 Thread Sven Wolf
Hi Mark, on my Lenovo V130 the patch works. Now I'm able to boot the current kernel again, without the need to remove the radeon and amdgpu driver (https://marc.info/?l=openbsd-misc=159276382718317=2) Thanks and best regards, Sven On 10/27/20 1:40 PM, Mark Kettenis wrote: Hi Kastus,

OpenBSD 6.8 release boot stuck on Intel NUC NUC7PJYH

2020-10-27 Thread Fabian
Hello misc, I recently upgraded from OpenBSD 6.7 release to the new 6.8 release on an Intel NUC Kit NUC7PJYH mini server. That machine ran OpenBSD without problems since version 6.5 and has been running 6.7 release (including all sypatches) until a day or so. The machine boots via UEFI and the

Re: wg(4) listen on a specific interface / address

2020-10-27 Thread j...@snoopy.net.nz
Hi Pierre, The error may indicate that port 53 on 127.0.0.1 is already used by another service. This appears to be confirmed by your netstat example. This is probably a dns service. Hope this helps explain the error. Joe Original message From: Pierre Emeriaud Date: Wed, 28 Oct

Fwd: Re: man netstart(8) OpenBSD-6.8

2020-10-27 Thread Luke Call
>- message from pipus - >Date: Mon, 26 Oct 2020 08:29:41 + >From: pipus >To: Theo de Raadt >Cc: "misc@openbsd.org" >Subject: Re: man netstart(8) OpenBSD-6.8 > >I could explain process class priority configuration until my mind is numb but >in the end without seeing the

Re: wg(4) listen on a specific interface / address

2020-10-27 Thread Brian Brombacher
> On Oct 27, 2020, at 5:33 PM, Pierre Emeriaud > wrote: > > Howdy misc@, > > I have a fairly complicated setup with lots of interfaces, a couple of > rdomains etc. > > I'd like wireguard to listen only on an IP address, not all. But if my > understanding of ifconfig(8) is correct, this

Internal microphone not working

2020-10-27 Thread Ashton Fagg
I'm running a ThinkPad T14s. There's been some recent additions to the azalia driver to help make audio work a little better on this machine (it now works and seems to get configured correctly). However, I'm having problems getting my internal microphone to work. I compiled my kernel with

search contains unknown domain in resolv.conf

2020-10-27 Thread Andreas X
Greetings. On OpenBSD 6.8, I have unbound enabled in my server, (server gets its IP via DHCP from my server provider) In resolv.conf I have a "search your-server.de" line and I don't know what hostname is that. My own hostname is something different. That seems the older hostname during setup (I

Re: mailing list management software

2020-10-27 Thread Craig Skinner
Hi Gregory, On Thu, 22 Oct 2020 17:12:42 +0300 Gregory Edigarov wrote: > is there any mailing list software which naturally supports virtual > domains? I've found MLMMJ rather good for multiple non-canonical domains: http://MLMMJ.Org/ The configuration files are different for each domain.

Re: Sound/audio onFirefox on 6.8

2020-10-27 Thread Duncan Patton a Campbell
Ok, so I need to apologize for wasting time here... I was experimenting with an "automated upgrade" (driven from gprolog) that went haywire... too many pots and just one kook. So now I'm back to 6.7 and 6.6, variously ;^/ On a second(?third) run at it I got the sound working for firefox but a

Re: search contains unknown domain in resolv.conf

2020-10-27 Thread Otto Moerbeek
On Tue, Oct 27, 2020 at 02:32:46PM +0300, Andreas X wrote: > Greetings. On OpenBSD 6.8, I have unbound enabled in my server, (server > gets its IP via DHCP from my server provider) > In resolv.conf I have a "search your-server.de" line and I don't know what > hostname is that. > My own hostname

Should I download 'distfiles/by_cipher ' or 'rsysnc --exlude by_chipher' ?

2020-10-27 Thread Martin
Do I need 'distfiles/by_cipher' in mirrored repo? Or may I exclude 'rsysnc --exlude by_cipher' while mirroring repository without negative effects possible? Martin

Re: snapshot boot fails with error "entry point at 0x1001000"

2020-10-27 Thread Mark Kettenis
Hi Kastus, Please don't have technical discussions on misc@; some developers, like me, only read it sporadically. The tech@ list is a much better place. The problem with your approach is that you allocate memory at a fixed address, and we can't be sure that memory is available. We may have to

Re: mailing list management software

2020-10-27 Thread Ingo Schwarze
Hi, Craig Skinner wrote on Tue, Oct 27, 2020 at 12:26:03PM +: > On Thu, 22 Oct 2020 17:12:42 +0300 Gregory Edigarov wrote: >> is there any mailing list software which naturally supports virtual >> domains? > I've found MLMMJ rather good for multiple non-canonical domains: > >

Re: search contains unknown domain in resolv.conf

2020-10-27 Thread Tommy Nevtelen
On 27/10/2020 12.32, Andreas X wrote: Greetings. On OpenBSD 6.8, I have unbound enabled in my server, (server gets its IP via DHCP from my server provider) In resolv.conf I have a "search your-server.de" line and I don't know what hostname is that. My own hostname is something different. That

Can't cron sct.

2020-10-27 Thread avv. Nicola Dell'Uomo
Hi, maybe I'm missing something trivial, but I can't figure out how to cron sct(1) My user cron config works and cron log reports sct was executed, but screen temp doesn't change ... Here's my user crontab: #   $OpenBSD: crontab,v 1.28 2020/04/18 17:22:43 jmc Exp $ # # SHELL=/bin/sh

Re: Can't cron sct.

2020-10-27 Thread trondd
On Tue, October 27, 2020 11:10 am, avv. Nicola Dell'Uomo wrote: > Hi, > > maybe I'm missing something trivial, but I can't figure out how to cron > sct(1) > > My user cron config works and cron log reports sct was executed, but > screen temp doesn't change ... > > Here's my user crontab: > >