On Jan 08 08:46:20, mill...@openbsd.org wrote:
> On Fri, 08 Jan 2021 16:19:02 +0100, Jan Stary wrote:
>
> > I know the disk itself works: this is the disk plugged into
> > an M.2 slot in a Dell Latitude E5570 (full dmesg below):
> > sd0 at scsibus1 targ 0 lun 0:
> > naa.5001b448b85325
> > 30
>
On 25/1/21 11:40 pm, Bastien Durel wrote:
> Hello,
>
> Short-circuit pins 3-5 using my DB9 cable as Mihai Popescu said[1]
> worked.
> Alas, this setup prevent to plug-in the cable on the other side ^^
>
> But this confirm there is an hardware problem.
>
> So if I understand well, I have to buy
Thanks Stuart!
On 1/26/21 11:36 AM, Stuart Henderson wrote:
On 2021-01-25, Kaya Saman wrote:
Thanks a lot Tom for your response.
Perhaps I wasn't quite clear in what I am trying to achieve?
When I say trunk, I meant from a switch perspective as in a 802.1Q trunk
port on a switch.
I
Den tis 26 jan. 2021 kl 14:11 skrev Ivan :
> I wonder why I have to make of=... being equal to some partition instead of
> the whole memstick?
> Why does man page example tells to use of=/dev/rsd1c but not of=/dev/rsd1?
> And why does it use exactly 'c' partition but not 'a', does that matter?
* Patrick Wildt [2021-01-08 11:17:18]:
> Am Fri, Jan 08, 2021 at 02:29:02PM + schrieb Peter Kay:
> > There appear to be no 4G modem support at the moment, specifically a
> > mini PCI-e one so I can stick it in a PC engines apu4d4 and have a
> > backup connection.
> >
> > Presuming a driver
I wonder why I have to make of=... being equal to some partition instead of the
whole memstick?
Why does man page example tells to use of=/dev/rsd1c but not of=/dev/rsd1? And
why does it use exactly 'c' partition but not 'a', does that matter?
--
Regards,
Ivan
On 2021-01-25, latincom wrote:
> It had worked for many years; but this time OpenBSD 6.8; server and
> Laptop, are not working as the man page says.
>
> I did an empiric test, because i am not qualified for a real test.
>
> Both are not able to send messages (e-mails), to other machines.
> The
On 2021-01-25, Kaya Saman wrote:
> Thanks a lot Tom for your response.
>
>
> Perhaps I wasn't quite clear in what I am trying to achieve?
>
>
> When I say trunk, I meant from a switch perspective as in a 802.1Q trunk
> port on a switch.
>
>
> I think I got mixed up with the OpenBSD terminology
On Sat 2021.01.23 at 01:04 +, tetrahe...@danwin1210.me wrote:
> The cwm default keybindings listed in the manpage do not appear to be
> entirely correct:
> https://man.openbsd.org/cwm
>
> For example the man page lists:
> CM-Delete Lock the screen.
>
> However, CM-Delete actually
On Tue, Jan 26, 2021 at 09:39:31AM -0500, Okan Demirmen wrote:
On Sat 2021.01.23 at 01:04 +, tetrahe...@danwin1210.me wrote:
The cwm default keybindings listed in the manpage do not appear to be
entirely correct:
https://man.openbsd.org/cwm
For example the man page lists:
CM-Delete
On Mon, Jan 25, 2021 at 08:08:20PM +0100, Jan Stary wrote:
I am trying to set up the bootloader on an external
USB stick to boot my FDE-encrypted disk:
Why? You say you can boot from the disk itself.
See the original linked email discussion from my post for the reasons
why. Short answer: if
I am very sorry for not reading the fucking manual!
--
Regards,
Ivan
Wonder if anyone is still using Procmail/Formail under 6.8 for presorting
incoming mail before it hits one's main inbox.
Also wondering if folks send the remainimg mail, after filtering, to
/var/mail/*user*, or to ~/mbox or to ~mail/mbox. Any advantage to be had,
or any mere consensus,
On Tue 2021.01.26 at 16:12 +, tetrahe...@danwin1210.me wrote:
> On Tue, Jan 26, 2021 at 09:39:31AM -0500, Okan Demirmen wrote:
> > On Sat 2021.01.23 at 01:04 +, tetrahe...@danwin1210.me wrote:
> > > The cwm default keybindings listed in the manpage do not appear to be
> > > entirely
Greetings,
Responder: OpenBSD 6.8 GENERIC.MP#4 amd64 iked
Initiator: pfSense 2.4.5-RELEASE-p1 (arm) [FreeBSD 11.3-STABLE]
(built on Tue Jun 02 17:45:24 EDT 2020) strongSwan 5.8.4
Using IKEv2 for tunnel from a residential gateway to passive iked
responder. Using RSA auth with PKI from ikectl(8).
On Tue, Jan 26, 2021 at 12:06:43PM -0500, Okan Demirmen wrote:
Please see my 2nd post where I explained I was hitting "Backspace",
and the
official documentation does not mention any binding for CM-Backspace.
I did not see a 2nd post; in any case, this is not cwm(1), rather the
default
Hello misc@
I can not believe that the solution has been to open port 25, Vultr rent
servers whit port 25 closed!
Thanks so much to Stuart Henderson for the solution.
On 2021-01-20 5:04 p.m., latincom wrote:
I read the archives of OpenSMTPD, and found 2 messages related to ssl,
nothing
Hi Faraz,
Faraz Vahedi wrote on Thu, Jan 14, 2021 at 08:05:32AM +:
> With a heavy heart, I am writing to hereby announce the end of the
> IRBUG's activities, the user group that I have been running for about
> two years. Because of the current situation in Iran, the pandemic era,
> and
On Tue, Jan 26, 2021 at 04:08:40PM +, Marek Klein wrote:
> Hi,
>
> We are working on an appliance like product that is based on OpenBSD.
> Recently we found out that our performance critical C++ program is
> ~2.5 times slower on OpenBSD compared to Ubuntu 20.04.
>
> The program basically
19 matches
Mail list logo
