symon duplication

this happens about every 10 minutes. symon.conf # monitor { cpu(0), mem, pf, if(de0), if(xl0), io(wd0) } stream to 192.168.25.78 2100 no newline in symon.conf Bobby Johnson

ccd mirroring and ccdxc

. Bobby Johnson

Re: ccd mirroring and ccdxc

Right, this is what I did as well. Tested. Works much better than the previous config. Any thoughts on monitoring the status of the ccd? Bobby Johnson On Wed, 2005-12-28 at 21:28 +0100, kami petersen wrote: Nick Holland skrev: (hint: you can do a CCD of just one disk). (hint 2: you

kqemu amd64

I'm having trouble getting qemu under amd64 to use kqemu. I'm running a snapshot from a couple days ago. I've tried installing the qemu package and the port. The kqemu package is installed and loading on boot. $ sudo qemu -kernel-kqemu -m 256 winxp-big.raw qemu: invalid option --

Re: kqemu amd64

}/+DISPLAY Bobby Johnson wrote: I'm having trouble getting qemu under amd64 to use kqemu. I'm running a snapshot from a couple days ago. I've tried installing the qemu package and the port. The kqemu package is installed and loading on boot. $ sudo qemu -kernel-kqemu -m 256 winxp-big.raw qemu

PC Engines alix2c3 bootloader issue

I'm missing the bootloader interaction with OpenBSD 4.2 installed on a compact flash card in this alix2c3. With the most recent bios from PC Engines 0.99. If I strike any keys ( like boot -s) during the time when the boot prompt should appear the system will not boot. If I wait it boots fine.

Re: PC Engines alix2c3 bootloader issue

The serial console works correctly when the speed is set to 9600 bps. On Thu, 2008-01-03 at 12:42 -0700, Bobby Johnson wrote: I'm missing the bootloader interaction with OpenBSD 4.2 installed on a compact flash card in this alix2c3. With the most recent bios from PC Engines 0.99. If I

Re: pf/routing config for two external interfaces

On Wed, Jun 22, 2016 at 3:26 PM, Jeremy wrote: > I have a SOHO firewall in production which has been connected to the > net via an ADSL line. We have a new fibre connection which will replace > the ADSL connection once I get the system switched over. I am having >

Re: IKEv2 (iked) VPN with Windows 10 clients

Your configuration looks reasonable. You should upgrade to 6.0. You could replace the local network range with 0.0.0.0/0 to limit the flow less. I've found that config address with a range doesn't work as expected with multiple clients. Below is an example of a working config using machine certs

Re: OpenIKED and Windows 10 Client

If you're doing pure certificate auth, not eap I think you need both certs. They do need to be installed under the local computer account. Install the CA cert in the trusted root CA store, put the machine cert in the personal store. I also think it may be necessary to put the full asn1_dn of the

Re: OpenIKED and Windows 10 Client

certs with diffrent "names" just to >> see if this makes a diffrence. I might be wrong what the real FQDN is or >> better what windows believe it should be :) >> >> regards >> >> Markus >> >> Am 12.04.2017 um 17:21 schrieb Bobby Johnson: &

Re: IKEv1 to AzureVPN exchange_validate failed

I played a bit with an ikev2 to connection to Azure. It wouldn't connect until I changed the childsa to aes-256-gcm. Here is a iked.conf config that will connect. It didn't pass traffic and I stopped playing with it, so this may not be that useful. ikev2 passive esp \ from 10.0.0.0/24 to

Re: iked, AES-GCM and certificates

An ip from the range will be assigned to the connecting client. I've had issues in previous releases with multiple clients getting the same ip though. 10.1.2.4 can be in that range, it doesn't need to be though. The ip or whatever you put there should be the CERT_CN. I like to make sure it'll

Re: IKED with multiple clients and nat

On Jun 2, 2018, at 9:45 AM, J Vans <3...@startmail.com> wrote: >> > On Jun 2, 2018, at 6:03 AM, Stuart Henderson wrote: >> > > > On 2018-06-01, J Vans <3...@startmail.com> wrote: >> > > I am trying to route all of my ipv4 traffic through a particular server >> > > > > using OpenIKED. I have

Re: IKED with multiple clients and nat

> On Jun 2, 2018, at 6:03 AM, Stuart Henderson wrote: > >> On 2018-06-01, J Vans <3...@startmail.com> wrote: >> I am trying to route all of my ipv4 traffic through a particular server >> using OpenIKED. I have it successfully set up so that each client can >> connect, and the traffic passes

Re: Iked troubleshooting

Maybe try a more open subnet in the from and to, at least for testing. Something like this - from 0.0.0.0/0 to 0.0.0.0/0 On Mon, Mar 12, 2018 at 6:02 AM, Aaron wrote: > Hi all, > > I’m having an issue with iked. I’m assuming it something trivial but I > can’t seem to figure