First time actually submitting a bug so let me know if there's anything I
missed, or if this is the wrong way to submit it-
Trying to install OpenBSD on Thinkpad Tablet X1 Gen 3 currently. Every boot
gets hung on "entry point at 0x1001000". Can't get to dmesg or I'd try to
give more specifics.
Ah- I'm just now seeing the note about the screen going black after the
kernel loads into memory, and doing some more digging shows the same kind
of issue when CSM isn't enabled. Unfortunately they had said that CSM
wasn't supported with the tablet...
Are you using a modified xorg.conf.d, and mind showing your xsession?
On Thu, Aug 22, 2019 at 2:58 PM kaletaa wrote:
> Hello,
> xenodm is having issues while starting a dwm session,
> I'm using a Thinkpad x220, OpenBSD 6.5
>
> dmesg
>
>
> OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13
hardware.
>
> On Wed, Sep 04, 2019 at 08:11:24AM -0500, Charlie Burnett wrote:
> > Hey,
> > I???ve been trying to write a patch to get vega 20 working, but due to a
> > screw up on my end I lost the progress I???d made. Before I start over
> again,
> > I was wondering if
any advice where to begin if I’m having to start from scratch?
Best regards,
Charlie Burnett
On Thu, Aug 1, 2019 at 11:06 PM Jonathan Gray wrote:
> On Fri, Aug 02, 2019 at 03:11:54AM -0500, Charlie Burnett wrote:
> > Hey-
> > I'd been messing around with the AMDGPU on current (
, Sep 4, 2019 at 9:44 AM Jonathan Gray wrote:
> Look for individual post 4.19 linux commits that are relevant.
> We have in the past taken small patches to enable more
> generations of hardware.
>
> On Wed, Sep 04, 2019 at 08:11:24AM -0500, Charlie Burnett wrote:
> > Hey,
> &g
> On Wed, Sep 04, 2019 at 10:28:51AM -0500, Charlie Burnett wrote:
> > Thanks for the advice!
> > Do you happen to have a link to the commit amdgpu is at currently?
> >
> > On Wed, Sep 4, 2019 at 9:44 AM Jonathan Gray wrote:
> >
> > > Look for individu
ing short or too slow. :)
>
> ---
> Oriol Demaria
> 2FFED630C16E4FF8
>
> On 18/09/2019 17:01, Charlie Burnett wrote:
> > I use Gnome as a DE but I still just do it through a terminal-
> > grep -R * “foo”
> > from whatever directory I wanna find the text in, rep
Hey-
I'd been messing around with the AMDGPU on current (which I'm aware is very
experimental) and had very few issues with it using a Vega 56 GPU. I
recently swapped to another Vega GPU (Radeon VII) and have issues with the
display not showing anything. Still boots fine, in that I can still enter
Hey, I'm looking to get OpenBSD working in UEFI only mode on newer Thinkpad
X1 devices, because for whatever reason it hangs when loading into memory
without CSM enabled, and some of the X1 devices no longer have a CSM
option. Does anyone have a fix, or advice on where I would start looking if
I
at 8:14 AM Kristjan Komloši
wrote:
> On Tue, 2019-07-16 at 18:32 +0000, Charlie Burnett wrote:
> > Hey, I'm looking to get OpenBSD working in UEFI only mode on newer
> > Thinkpad
> > X1 devices, because for whatever reason it hangs when loading into
> > memory
> &
Hey all,
I recently picked up an X1 carbon 6th gen that happened to have the
touchscreen option on it. Everything works great otherwise, but I don't
seem to have any luck on the touchscreen issue. I don't see anything
relevant in dmesg either, shown below. Any ideas?
OpenBSD 6.6-current
Well, I’m a dumbass.
I just needed to swap out “psk” for “password” in my file. All working now.
On Tue, Feb 4, 2020 at 4:59 PM Charlie Burnett wrote:
> Well, I at least have a tangible error now. Observing through wpa_cli, I
> get the following:
> <3>CTRL-EVENT-EAP-STA
Hey y'all,
Sorry if this has been answered before but I couldn't find a satisfactory
answer searching for it, and this is more of an academic question. So
security focused Linux distros like Qubes go to extremes to
compartmentalize/isolate any and all programs it can. FreeBSD has it's jail
Hey @misc,
I've used OpenBSD on my desktop and server for a while, however they both
have an Ethernet connection. I recently got my hands on a thinkpad x1 6th
gen in order to ensure compatibility with OpenBSD. I can connect fine via
the /etc/hostname.if with /etc/netstart, however I need to be
hcp
>
> sh /etc/netstart
>
> On Feb 2, 2020 3:42 PM, Charlie Burnett wrote:
> >
> > Hey @misc,
> > I've used OpenBSD on my desktop and server for a while, however they both
> > have an Ethernet connection. I recently got my hands on a thinkpad x1 6th
> >
wrote:
> On Sun, Feb 02, 2020 at 09:42:52PM GMT, Charlie Burnett wrote:
> > Hey @misc,
> > I've used OpenBSD on my desktop and server for a while, however they both
> > have an Ethernet connection. I recently got my hands on a thinkpad x1 6th
> > gen in order to ensure c
Hey y’all,
I recently got a surface book for a real good price since I was due for an
upgrade, and since I usually run OpenBSD on my daily machine I went ahead
and installed it. I’m aware that the wireless card isn’t supported, but
I’ve got a usb one that works fine. During the installation it had
Ryzen 3 Vega is based on the Raven architecture, which has worked for me on
machines before so I'm not sure you'd have much issue with it, I'd imagine
it'd just work "out of the box". Wireless is up in the air, since the card
didn't seem to be listed on the specifications online.
On Mon, May 25,
Hi,
Wasn’t sure who to tell this to, but with Vega 20 hardware under -current,
there is an issue with the firmware, where it cannot load. Manually
installing the latest amdgpu firmware from kernel.org fixes this seemingly.
There's also an issue that I've been unable to figure out for a while here
Mon, Jun 29, 2020 at 11:13:49PM -0500, Charlie Burnett wrote:
> > Hi,
> >
> > Wasn’t sure who to tell this to, but with Vega 20 hardware under
> -current,
> > there is an issue with the firmware, where it cannot load. Manually
> > installing the latest amdgpu firm
Hi,
I'm still getting the issue from earlier where X freezes entirely and I
can't get it to work, though I've got no clue what's triggering it now,
there seem to be no *regular* outputs to /var/log/messages with the crash.
However, I was trying to trigger the bug earlier so I could hopefully
Hi,
I've set up a good deal of openbsd firewalls in a professional environment
before with little to no issue. I'm trying to set one up for me personally
though, and am having some bizarre issues, with no clue where to begin
trying to fix them. This is on an APU unit from PC Engines. I've managed
Hi,
I wasn't sure if this was worthy of ports or not, so I wanted to throw this
out here first. I don't like Zoom, and I understand WebAssembly has some
inherent issues in it, but I imagine a good number of people don't have a
choice and have to use it as well in light of the current state of
Ah, well now I feel dumb... my sincere apologies for the spam then. Thanks
for the help, I had no idea! :)
On Sat, Jan 30, 2021 at 7:40 AM Thomas Frohwein
wrote:
> On Fri, Jan 29, 2021 at 09:44:26PM -0600, Charlie Burnett wrote:
> > Hi,
> > I wasn't sure if this was worthy of por
it. Oddly
enough, I just upgraded my personal machine earlier today without any
issues. Not sure what would need to be done about it, but I figured someone
oughta be told!
Best Regards,
Charlie Burnett
26 matches
Mail list logo
