I wanted to know if others thought pdksh v5.2.14's behavior is incorrect
when trapping the EXIT and ERR. I wrote four tests to demonstrate.
TEST_1 fails in my opinion. I believe it should output the following:
ERR
EXIT
# TEST_1
trap 'echo EXIT' EXIT
trap 'echo ERR' ERR
set -e
cd /X
Otto Moerbeek wrote:
On Fri, 13 Jul 2007, Marcos Laufer wrote:
I did read the archives, and it helped me to find out that
restarting mysql fixes it for some time, and i increased the values
several times but no luck. It starts working fine
for a while but then again it fails . In the end i
Andris wrote:
On 8/5/07, Jacek Masiulaniec [EMAIL PROTECTED] wrote:
On 4 Aug 2007, at 19:31, Andris wrote:
Hi, I'm writing a set of small utilities as scripts, and I got a
segmentation fault working on one of them.
The script is suppoused to align text with spaces. Say you have
this
pixotec wrote:
I want to set the environment variables
PATH=$PATH:/usr/local/jdk-1.5.0/bin
JAVA_HOME=/usr/local/jdk-1.5.0
globally.
for one user I can change therefor .profile like this:
PATH=/usr/local/jdk-1.5.0/bin:/bin:...
...
export PATH HOME TERM
but I want it for all users:
1. could
Lars Hansson wrote:
On 8/9/07, Clint Pachl [EMAIL PROTECTED] wrote:
Or you could programatically change each user's .profile.
Uhm, why? Markus is correct that both /etc/profile and $HOME/.profile
are sourced when you log in so to set up global variables you set them
in /etc/profile
Can one reliably compile 4.0 release patches on a 4.1 release system?
djgoku wrote:
On 8/24/07, Clint Pachl [EMAIL PROTECTED] wrote:
Can one reliably compile 4.0 release patches on a 4.1 release system?
Is there some patches that aren't in 4.1? If so that seem really weird
why it wouldn't be. Can you give an example?
In my network I have 4.0
Joachim Schipper wrote:
On Fri, Aug 24, 2007 at 10:31:32PM -0700, Clint Pachl wrote:
djgoku wrote:
On 8/24/07, Clint Pachl [EMAIL PROTECTED] wrote:
Can one reliably compile 4.0 release patches on a 4.1 release system?
Is there some patches that aren't in 4.1
Darren Spruell wrote:
On 8/25/07, Clint Pachl [EMAIL PROTECTED] wrote:
The reason for this is that I can use a single build machine running the
current release, and two source trees, current and previous.
[1] Well, it usually does, but it can break in interesting ways
Matthew Szudzik wrote:
The fact that you need to provide normal users with these kind of
privileges indicates a possible flaw in your overall scheme. You may
find that, after careful reconsideration, there are precious few
commands that you would actually have to allow the users to run with
Douglas A. Tutty wrote:
Hello all,
I have a 486DX4-100 with 32 MB ram. I bought an 8 GB drive to put in my
P-II and it won't boot it so I've put in in the 486 along with a 1 GB
drive.
I'm on dialup and would like to avoid a bad partitioning decision
requring a whole new install/download cycle
Is it possible to download a package and its dependencies, to PKG_CACHE
for instance, without installing anything?
What is the most efficient and secure way to keep the clocks of
servers on a network in sync?
Because OpenNTPD was designed with security in mind from the start, I
was thinking about using ntpd only on all systems. One system would get
time from the NTP pool and all other servers on the
Darrin Chandler wrote:
On Tue, Oct 23, 2007 at 11:49:57AM -0600, Chris Kuethe wrote:
On 10/23/07, Boris Goldberg [EMAIL PROTECTED] wrote:
The ntpd from OBSD is raw and lame yet. It takes days (!) to really
synchronize, adjusting time and clock frequency back and forth (even if
Theo de Raadt wrote:
That is a very interesting anecdote. That has got to make Henning proud;
hell I'm proud of him. The amazing thing is that the ntpd binary on my
i386 is only 34.4K. The ntpd binary (non-OpenNTPD) on my i386 FreeBSD
media center is 263K, not to mention all of the other ntp*
Henning Brauer wrote:
* Boris Goldberg [EMAIL PROTECTED] [2007-10-23 15:50]:
CP One system would get time from the NTP pool and all other servers on
CP the network would sync to the local server.
You don't really need ntpd on all systems. One (timeserver) runs ntpd,
and others use
the connection and eliminate the modem all together?
Regards,
Clint Pachl
Marco Peereboom wrote:
LSI megaraid cards will ALWAYS disable write cache whenever there is no
battery backed up memory on the card. No exceptions. The only thing
you can do is purchase a BBU and replace the current DIMM.
People state disk throughput numbers, but how are these measured? I
Jay Jesus Amorin wrote:
im running openbsd 4.1-current on my laptop, acpi is working but halt
-p is not working, it will just reboot instead of halt, WHY?
here's my additional info:
# sysctl -aA | grep acpi
kern.timecounter.hardware=acpitimer0
kern.timecounter.choice=i8254(0) acpihpet0(1000)
Hi all,
Can anyone recommend a technical networking book (or links) regarding
design, architecture, implementation, monitoring, and best practices? I
just purchased a Dell 3248 managed switch, 10 IBM 1U servers, and 10
towers. I would like to practice setting things up on this hardware. I
Ronnie Garcia wrote:
Chris C. a icrit :
I'm in the need to replace my two 100mbit fxp nic's in my firewall
with a 1000mbit one. The hardware is kinda old. (PIII)
I'm looking for an inexpensive but not bad (so I think no realtek
chips) nic.
Have looked at sk and bge, but couldn't find any bge
What options are available for programming 8-bit microcontrollers? I
found gputils for Microchip and avr for Amtel in the ports. What is the
most supported option?
gputils in ports is a three year old version; does it work well? Is
anyone using Microchip's PICs; if so, what hardware
I was working on a network design and was wondering if CARP can provide
fail-over for a group of layer 2 firewalls?
I was thinking one could just associate an interface using carpdev
without specifying the IP address or netmask. Would that work?
firewall 1
# ifconfig bridge0 create
#
Axton wrote:
On 5/2/07, Matiss Miglans [EMAIL PROTECTED] wrote:
Hi
Scenario 1 will be right.
Don't mix there normal ethernet with vlan's.
Jonathan Whiteman wrote:
Lets say I'm setting up vlan devices so that 4 completely separate
subnets' gateways can share same ethernet port on the router.
I'm curious if the flag bits, shown for each interface with ifconfig(8),
can be decoded in order to reveal the characteristics of NICs, such as
hardware RX/TX checksums and VLAN.
So far I have searched:
netintro(4)
ifmedia(4)
inet(4)
sys/net/if.c
sys/dev/pci/if_em.c
But haven't found
Jason Dixon wrote:
On Thu, 03 May 2007 23:18:38 -0700, Clint Pachl [EMAIL PROTECTED] wrote:
Axton wrote:
On 5/2/07, Matiss Miglans [EMAIL PROTECTED] wrote:
Hi
Scenario 1 will be right.
Don't mix there normal ethernet with vlan's.
Jonathan Whiteman wrote:
Lets say I'm
Jon wrote:
Greetings everybody,
So I've set up what I thought should be a proper vlan configuration
however something is clearly still not correct. Traffic passes fine
to the vlan devices from the external side of the router (I can ping
them) however traffic does not seem to pass bewteen the
Jon wrote:
This was very informative. Thank you very much. After re-evaluating
the vlan/tagging settings on the 3com switch ports we noticed that
they were all set to hybrid mode (so some could be on multiple
vlans) but the connection to the router was set to trunking mode
instead of hybrid.
John Nietzsche wrote:
Dear gentleman/madam,
i have just installed openbsd 4.1. I am very happy with it, but
something i was not expecting is happening:
As an ordinary user (belonging to the group wheel) i switched to the
ports collection directory (/usr/ports/x11/openmotif) and issued i
make
.
FYI2: Please don't top post, it feels unnatural replying to your message.
Thanks in advance.
On 5/10/07, Clint Pachl [EMAIL PROTECTED] wrote:
John Nietzsche wrote:
Dear gentleman/madam,
i have just installed openbsd 4.1. I am very happy with it, but
something i was not expecting
Matthew Weigel wrote:
Zach Keatts wrote:
Fortunately this is a sparc machine,
Then everything will work fine.
It's specifically i386 that sucks so hard.
Hey man, not all i386 suck so hard. I have some old IBM xSeries
servers that don't even have PS/2 or VGA ports. The only way
stuart van Zee wrote:
Does anyone know of a good, easy-to-use client
for Yahoo instant messenger in the ports tree.
Alternatively, you could use a web app. Meebo.com is a very cool web
interface to ICQ, Jabber, AOL, Yahoo, Google, and Microsoft IMs. I've
used Gtalk via meebo.com on
The other day on the Internet I found a shell tip that showed how to use
cp or mv with only a single argument. I tried it in the default pdksh in
OBSD and it worked. I thought to myself, I can't believe I have been
using the shell for over 8 years and didn't know that. Now I can't
remember how
Douglas A. Tutty wrote:
I have a box that I want to keep as secure as I can but I also need to
be able to use a graphical browser from it (I know that this is a
trade-off).
There is no graphical browser in base. I don't need or want this
browser to do javascript or flash (I have a different
Rico Secada wrote:
On Thu, 17 Jan 2008 18:17:54 -0500
Douglas A. Tutty [EMAIL PROTECTED] wrote:
On Thu, Jan 17, 2008 at 05:11:53PM -0500, STeve Andre' wrote:
On Thursday 17 January 2008 03:42:38 pm Douglas A. Tutty wrote:
I have a box that I want to keep as secure as I can but
Zbigniew Baniewski wrote:
On Fri, Feb 01, 2008 at 08:16:49PM +0200, Imre Oolberg wrote:
As an operating system my first choice would OpenBSD and second is Linux.
In fact at the moment i run such a kind of setup using Linux but i feel
need to upgrade my hardware, i have old 700 MHz Celeron,
Chris wrote:
I am after a software that would allow me to view photos from my
digital camera which I usually mount in /mnt/camera. I tried from the
ports tree: digikam, gphoto, gtkam, kphotoalbum, wmphoto, kamera -
none of them really work well in showing the pictures; some of them
want to
Richard Wilson wrote:
Increasingly, I find that I have many servers, especially OpenBSD
servers, where the only bit of the hard drive worth backing up is /etc.
Good examples are routers or spamtrap boxes where everything is part of
base. If a hard drive goes pop, all I need is to install the OS,
Guido Tschakert wrote:
Hello folks
short:
will 2 (or more) dhcrelay work on one router without problems
long:
I have a router connected to 3 networks:
a.b.1.0/24 connected to if1,
a.b.2.0/24 connceted to if2,
a.b.3.0/24 connected to if3.
Lets say I have a dhcpd on a.b.1.1
Is it possible to
Is the ~/.k5user file supported in OpenBSD's Heimdal implementation? I'm
running OBSD 4.1.
kadmin list *
root
pachl
default
root/root
pachl/root
pachl/admin
kadmin/admin
kadmin/hprop
kadmin/changepw
krbtgt/MOKAZ.COM
changepw/kerberos
host/htx.mokaz.com
host/kerberos.mokaz.com
I'm running nginx web server on my DMZ servers. It has the ability to
run the master process as root and the workers as a non-root user. All
logs, pid file, etc. are written by the master process. I was thinking
of redirecting port 80 traffic to a non-privileged port via pf and
running nginx
Jesus Sanchez wrote:
Hi all,
I'm using 4.2 without problem, and I'm trying to find one xterm to my
personal use with only one thing in mind: low cpu and memory usage.
I have been using mrxvt for years. It's also multi-tabbed. Currently,
I'm running 10 terminals in a single mrxvt process and
Jesus Sanchez wrote:
Hi, I'm using 4.2.
I'm using 4.1.
I have installed from ports the program mrxvt it works well as people
say but I have (I believe) found a buggy behaviour when using mrxvt and
ksh (the OpenBSD one).
I launch startx (with fvwm2 and mrxvt on my .xinitrc) as a regular
Is IP compression/ipcomp flows implemented in ipsecctl(8)? I am trying
to perform encryption (enc) and compression (ipcomp) between two
OBSD3.9 hosts.
ipcomp(4) states, Currently, IPCA can be created using the ipsecadm(8)
tool, with no mention of ipsecctl.
Here is my simple setup:
sysctl
Because portmap(8) dynamically assigns the mountd(8) port, how would
one write a pass rule in pf for mountd(8) traffic? My problem is that
every time mountd(8) is re/started, it operates on a different port and
my fixed pf rules block the mount protocol and, consequently, my
clients cannot mount
Christian Rueger wrote:
Am Mittwoch, den 21.06.2006, 14:03 -0700 schrieb Clint Pachl:
Because portmap(8) dynamically assigns the mountd(8) port, how would
one write a pass rule in pf for mountd(8) traffic? My problem is that
every time mountd(8) is re/started, it operates on a different port
Ted Unangst wrote:
On 6/21/06, Clint Pachl [EMAIL PROTECTED] wrote:
Because portmap(8) dynamically assigns the mountd(8) port, how would
one write a pass rule in pf for mountd(8) traffic? My problem is that
every time mountd(8) is re/started, it operates on a different port and
my fixed pf
Bharj, Gagan wrote:
Hello Folks,
I have got my VPN working with automatic key exchange and a hard-coded
password. I would like to implement the VPN using public/private keys. Do
you guys know of any site that has a good tutorial on how to set up such a
system? BTW Would such a setup require
Scott Francis wrote:
On 6/23/06, Theo de Raadt [EMAIL PROTECTED] wrote:
[snip]
http://www.freebsd.org/cgi/man.cgi?query=mountd
It's definitely possible (Free and Net both offer the -p option).
I think that is completely ridiculous. Hardcoding RPC utilities
to non-random ports to try
My xdm server produces IO errors when trying to run through an IPSec
tunnel setup with ipsecctl and isakmpd:
XIO: fatal IO error 60 (Operation timed out) on X server sony:0.0
after 10 requests (7 known processed) with 0 events remaining.
Setup:
X11 server ---(wireless-ipsec)--- AP/router
Does PF utilize multiple processors? One of my router/firewalls is a
dual Pentium Pro 200. It also runs ftp-proxy, but that's it. Would a PII
400MHz be equivalent, better, or worse?
Just curious. From what I understand, the network stack is not threaded,
thus multiple processors would not be
Stephen Bosch wrote:
Hi, everybody:
Okay -- the good news is that we've got the SA up between these two
sites, the bad news is that traffic isn't passing.
The situation is complicated by some NAT that I need through the
encryption interface.
We have the following:
HostA_private_IP
Breen Ouellette wrote:
Theo de Raadt wrote:
I will ask this honestly:
Why should we bleed our little hearts over a company who acted like
assholes towards us for years, and only changed their policy due to
public pressure?
Don't; just drop it and act like a man. No, Theo needs an apology
J.C. Roberts wrote:
Don't misunderstand me, CARP is an amazingly innovative and extremely
useful implementation of a redundancy protocol. It's technically better
than HSRP or any of the versions of VRRP but the problems till stands
that it is not an official protocol, which simply means adoption
Massimo Lusetti wrote:
I got a VPN network which works quite well, i mean works very well
thanks to OpenBSD and its implementation but i got one end point over
the 6 running which causing me troubles.
The configuration is done with ipsec.conf and is identical to others
which works well.
Here
Massimo Lusetti wrote:
On Mon, 2006-07-03 at 00:51 -0700, Clint Pachl wrote:
Are both end points trying to negotiate? Try using the passive keyword
on one endpoint: ike passive esp ...
Yes both active. Does that should cause problems?
Here is what I have noticed while watching tcpdump
Henning Brauer wrote:
* Daniel Ouellet [EMAIL PROTECTED] [2006-07-03 21:44]:
Is there a special reason why we couldn't see the
set skip on interface
in the display of the rules in pf with the regular:
pfctl -sr
it is not a rule.
It is an option.
Would it be beneficial to add an Options
Richard Wilson wrote:
Hulloo list,
Can anyone recommend a load balancer for http/https for OpenBSD?
Currently I'm using Pound, from http://www.apsis.ch/pound/ which runs
under OpenBSD, and supports connection tracking via IP, cookie and
request ID (eg PHPSESSID) and seems to do everything I
On Friday 14 July 2006 15:09, pk.ra wrote:
Does OpenBSD support registering to a safe wireless network
using certificates?
Use IPSec: ipsecctl isakmpd RSA pubkeys.
1. Setup flows and SAs in ipsec.conf on both ends
2. Copy public RSA keys to each endpoint in /etc/isakmpd/pubkeys/...
3.
Can anyone recommend a light-weight multi-tabbed terminal for OBSD 3.9?
I looked through the i386 packages, but didn't notice any. I'm using FVWM2.
I have used mrxvt, materm.sourceforge.net, on FreeBSD in the past and
really liked it; minimal dependencies and small memory foot print. I
just
Michael Hernandez wrote:
On Aug 4, 2006, at 1:37 PM, Maxim Bourmistrov wrote:
It compiles and works here.
Just comment out The ugly hack for OpenBSD:
/*
# ifdef OS_OPENBSD
typedef unsigned int_our_wint_t;
typedef struct {
int __count;
union {
_our_wint_t
Tomas wrote:
Hi list,
I was wondering is there any way to send SMS messages from OpenBSD OS?
May be there is any program to do such task?
You could use Google's online SMS service. It's not directly from your
OBSD box, but it can get the job done. Here are a couple of scripts I
wrote a
Jeff Ross wrote:
I followed with great interest the recent thread on misc@
http://marc.theaimsgroup.com/?l=openbsd-miscm=115620585301672w=2
aboout bad write performance with the MegaRAID 320-2 card, since I was
also experiencing what I perceived to be slow write performance with the
same
atstake atstake wrote:
I am using ssh (OpenSSH_4.4, OpenSSL 0.9.7j) on OpenBSD4.0. I want
idle user sessions to timeout after a certain period. I tried
ClientAliveInterval 15 and ClientAliveCountMax 3 in
/etc/ssh/sshd_config restarted sshd which, according to
sshd_config(5) should end the idle
Alexander Hall wrote:
Alexander Hall wrote:
Tasmanian Devil wrote:
Sorry, I was too fast, I just saw that symbolic links don't have
modes. I don't now then, sorry!
I'd say they do have modes, but they are not very useful:
$ umask 777; ln -s a b
$ umask 000; ln -s a c
$ ls -lF
total 0
James Turner wrote:
I've been trying to get my new ral(4) card to work like I would expect it
to. I've read through most if not all the talk on misc@ about running these
cards in hostap mode. I would really like to replace my wi(4), which
works really well, with my new ral(4) and enjoy 11g and
alemao wrote:
Hi,
I installed OpenBSD/amd64 snapshot on a Macbook 3,1 (Late 2007).
It recognizes both processors but not all memory (3GB instead of 4).
There's something i can do?
No. Read the archives or Google it.
Insan Praja SW wrote:
Hi Misc@,
Just wondering around, is there any multicasting technology (PIM-SM,
PIM-SSM etc) currently developed or implemented in OpenBSD?. Since
working with this unbelievable OS (especially with
routing/filtering/forwarding) I wish to know more about it.
Right now I
Ted Unangst wrote:
On 7/19/08, Chris Kuethe [EMAIL PROTECTED] wrote:
- svnd backed by a whole slice on disk
I know some people have done this, but the code doesn't like it. I'd
stick with normal files.
I have done file, partition, and whole disk; each one gets progressively
It seems the other BSDs have removed it from the base. Is anyone using
it on OpenBSD? I thought it might be useful tool to update some configs
on my network, but I can't seem to get it working.
I'm getting errors like:
SUP: SCM GOAWAY Can't read list file sup/junk/list [t22.mokaz.com]
I've
John Nietzsche wrote:
Hi folks,
i have configured my openbsd kerberos server. It is serving two other
computer in my home network. One of this client is running openbsd the
other is Windows XP.
I am able to login into any of these 2 client and authentication goes
through kerberos 100%
Sam Fourman Jr. wrote:
I have a Linksys card that uses ral and I can confirm this
Sam Fourman Jr.
On 12/9/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Hi List,
i've tried today openbsd 4.0
with several cards:
rt2561t - PC-620C
rt2560f - WMIR-103G
rt2560f - GN-WIKG
with all cards i got
I need to kill all the processes that cannot reach their controlling
terminal (according to `man ps`: they have been revoked). Or, how could
I get them back or place then into new terminals?
This machine is a diskless X client. The problem occurred when I plugged
another machine into the switch,
atstake atstake wrote:
Not directly OpenBSD related but I thought I'd ask. I'd like to use
a revision control system to manage files on 25-30
servers but I'm not sure whether I'd use a centralized repository or
have a separate revision control system on each box. It would also be
good
to know
Francois Visconte wrote:
Hello
To the OP, I would keep everything centralized and in a repository.
Then dedicate a test machine, or two, that you will use to deploy
your updates and test the integrity of your automation system. If all
goes well with the test, push the tested updates over
Will Maier wrote:
On Tue, Dec 19, 2006 at 03:00:04AM -0700, Clint Pachl wrote:
I would use a dedicated, highly secure and always backed-up box to
store/manage a central repository (CVS/SVN). This repos will hold
all the necessary bytes (binaries, config files, ports, etc.) to
re-image any
Francois Visconte wrote:
Hello
To the OP, I would keep everything centralized and in a repository.
Then dedicate a test machine, or two, that you will use to deploy
your updates and test the integrity of your automation system. If all
goes well with the test, push the tested updates over
Cristiano Deana wrote:
i can't find any reference about max memory in openbsd, only some
questions about it (from me and others).
i tried with 4.0 i386 and amd64 and it seems i have no luck to see all
my memory (4G).
i also tried the patch who someone post the link but it doesn't work.
so,
Gregory Edigarov wrote:
It would be greatly appreciated if somebody can make an md5 checksum
of the generic kernel.
Need to check that as my OpenBSD 4.0 install hangs while booting at
the very early stage.
# this is for i386 because you said old PC
MD5 (bsd) =
Tom Beard wrote:
Samurai Chef wrote:
I'll do it. I'll order some and announce here. I'll set up a ebay
store for the merchandise. contact me with requests.
I'd take a few if you got them done.
Me too. Is that eBay store setup?
Like someone all ready mentioned, it would be
Rodney Hopkins wrote:
I want to run a NFS server on OpenBSD with pf enabled
and configured only allow the required inbound ports
needed to allow NFS mounts to work.
The thing is, the only way I've successfully been
able to do this is to exclude ports 1024 from being
blocked inbound by pf.
Have the file systems from one OS version to the next always been
compatible? Will they continue to be?
My concern is that a 3+ year old dump may not restore correctly on
current version of OBSD. Can I be assured that I can store data reliably
for 3 - 5 years on a FFS?
-pachl
James Mackinnon wrote:
Hi All
Hate to ask something that might be a simple answer but I am trying to find
how it is best / easiest to get the CPU usage of a BSD 4.0 box.
I only need the result and not a bunch of other data as I want to store the
result in a mysql db.
Basically i'm just
Alec Taylor wrote:
What's the most secure operating system?
/me is thinking OpenBSD
SELinux by far.
I just listened to an interview with one of the devs on the project
(http://twit.tv/show/floss-weekly/156). Wow! With SELinux, you basically
just flip a switch and boom, you're secure.
In the KDC log file, I get the following errors:
2010-10-04T02:40:11 TGS-REQ pa...@mokaz.com from IPv4:10.0.9.15 for
afs/ualberta...@mokaz.com
2010-10-04T02:40:11 Server not found in database:
afs/ualberta...@mokaz.com: No such entry in the database
2010-10-04T02:40:11 TGS-REQ pa...@mokaz.com
I tried to rebuild a single disk in a 4 disk raid-10 array using the
following command:
# bioctl -R 0:3 sd0
bioctl: BIOCSETSTATE: invalid argument
What does this mean exactly?
I did rebuild the array via the MegaRAID BIOS utility. Are we able to
rebuild arrays via bioctl?
# bioctl sd0
I've been using an IBM Thinkpad T22 (P3 900MHz) laptop for quite some
time and I want to upgrade. I am looking for some expert advice on what
to upgrade to in the Thinkpad T-Series.
Two main considerations:
1. Core Duo 32-bit (T60) or Core 2 Duo 64-bit (T61)? I've only used
i386, should I
Ted Unangst wrote:
On Fri, Oct 22, 2010 at 9:04 PM, Clint Pachlpa...@ecentryx.com wrote:
1. Core Duo 32-bit (T60) or Core 2 Duo 64-bit (T61)? I've only used i386,
should I think about amd64?
Are you sure about that? I didn't think they made any T60s with plain
Core chips, though I
Neal Hogan wrote:
On Fri, Oct 22, 2010 at 8:04 PM, Clint Pachlpa...@ecentryx.com wrote:
I've been using an IBM Thinkpad T22 (P3 900MHz) laptop for quite some time
and I want to upgrade. I am looking for some expert advice on what to
upgrade to in the Thinkpad T-Series.
Two main
Henning Brauer wrote:
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
Intel GM965 Video rev 0x0c at pci0 dev 2 function 1 not configured
Does this mean you don't get hardware graphics acceleration?
Henning Brauer wrote:
2. I would like graphics hardware acceleration. I know I need to
stay away from nVidia. The T60 comes with ATI Radeon and the T61 is
the integrated Intel 965GM.
Is there anything else I need to be concerned with regarding OpenBSD
on the T-Series? What would you
Henning Brauer wrote:
* Clint Pachlpa...@ecentryx.com [2010-10-24 22:33]:
Henning Brauer wrote:
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
Intel GM965 Video rev 0x0c at pci0 dev 2 function 1
Paolo Aglialoro wrote:
Just a small hint after the 60 series all thinkpads rock... but I
wouldn't go to T series unless you'll be moving quite seldom. My advice is a
whooping X61, ultraportable yet powerful and really silent.
I thought about the X61. However, my laptop will rarely
Henning Brauer wrote:
Well, I have this on a Dell Precision 220 and graphics acceleration
doesn't work in X.
pchb0 at pci0 dev 0 function 0 vendor Intel, unknown product
0x2500 rev 0x03
agp at pchb0 not configured
radeondrm0 at vga1: apic 2 int 16 (irq 9)
drm0 at radeondrm0
Henning Brauer wrote:
1. Core Duo 32-bit (T60) or Core 2 Duo 64-bit (T61)? I've only used
i386, should I think about amd64?
shouldn't make a difference. personally, I run i386 anyway.
Any interesting reason you run i386 on 64-bit hardware? Stability?
Performance?
David Vasek wrote:
On Sun, 24 Oct 2010, Clint Pachl wrote:
If I really need portability (flying, camping) and I'm just going to
be writing code in vim, then I use my trusty Sony Vaio SR17, weighing
in at less than 3 pounds (~1.3KG). I paid about 2400USD for it new in
2000; works like a charm
I am starting a new project that needs version control and I was
thinking about using OpenCVS. However, I'm not sure if it is in the base
(I'm running -current). My old 4.4 firewall has /usr/bin/opencvs. Is
/usr/bin/cvs actually opencvs?
I noticed http://www.openbsd.org/plus48.html states
UPS is so annoying. The UPS developer's guide is in a 9MB PDF file. When
I open it with xpdf(1) I get a (1) page PDF that states I need to
download the the latest Adobe crapware to view it.
How can I get around this? Why does xpdf even abide?
I tried the following gs(1) command hoping it
Brynet wrote:
Hi,
Why are you using xpdf? it's so old and crummy :-).
print/epdfview, which uses the poppler library.
textproc/mupdf, independent renderer, pretty good.
-Bryan.
All I can say is that I use cwm and don't like interfaces, GTK, gnome,
or KDE. I highly agree with Patrick.
Joachim Schipper wrote:
On Sat, Dec 04, 2010 at 06:28:04PM -0700, Clint Pachl wrote:
When I open [the UPS developer's guide] with xpdf(1) I get a [message]
to download the the latest Adobe crapware to view it.
This is cheating, but have you tried throwing it into Google docs
1 - 100 of 177 matches
Mail list logo