Re: sysctl hw.sensors hacking?

2005-08-09 Thread Jonathan Gray
On Wed, Aug 10, 2005 at 12:33:18AM -0500, Matt Garman wrote: I just built a firewall box using a Via EPIA-CL6000E motherboard. I'd like to be able to monitor the temperature(s) within the system. However, it appears there is currently no means to do that in OpenBSD (at least not that I've

Re: Using an ASUS K8S-MX a mistake? - update

2005-08-14 Thread Jonathan Gray
On Sun, Aug 14, 2005 at 09:04:04AM -0500, Joe Szedula wrote: I've installed the amd64 -current (13 August) on my ASUS K8S-MX system. It solved the bus-master DMA error problem as well as the problem with the drives (CD hard disk) on the secondary IDE not being recognized. I compiled the

Re: Using an ASUS K8S-MX a mistake? - update

2005-08-14 Thread Jonathan Gray
On Sun, Aug 14, 2005 at 12:14:02PM -0500, Joe Szedula wrote: On 8/14/05 10:29 AM, Jonathan Gray ([EMAIL PROTECTED]) wrote: Does this: SIS 182 SATA rev 0x01 at pci0 dev 5 function 0 not configured just mean there were no SATA drives connected? Will SATA drives work when connected

Re: [OpenBSD 3.7] D-Link DWL G630 and Netgear WG 511T (dmesg + ifconfig -A)

2005-08-16 Thread Jonathan Gray
On Tue, Aug 16, 2005 at 11:27:01PM +1000, Z L wrote: On 8/16/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: - Original Message - From: Z L [EMAIL PROTECTED] Date: Monday, August 15, 2005 8:27 am Subject: Re: [OpenBSD 3.7] D-Link DWL G630 and Netgear WG 511T (dmesg + ifconfig -A)

Re: [OpenBSD 3.7] D-Link DWL G630 and Netgear WG 511T (dmesg + ifconfig -A)

2005-08-16 Thread Jonathan Gray
On Tue, Aug 16, 2005 at 09:40:17AM -0500, Qv6 wrote: The list in ath(4) is a holdover from netbsd/freebsd where they use a driver based on closed source components. Do not assume everything there will work. If people know of things in there that don't work, tell me and I will comment

Re: Success with LinksysWPC11 v4 PCMCIA Wireless

2005-08-17 Thread Jonathan Gray
On Wed, Aug 17, 2005 at 02:05:05PM -0400, psi0nik wrote: Will H. Backman wrote: Just wanted to write in about success with the Linksys WPC11 v4 PCMCIA Wireless B card. These were on sale at Staples for $5 USD. Plugged it in to a 3.7 release i386 laptop. Detected as rtw0. Set it for dhcp to

Re: wireless usb

2005-08-25 Thread Jonathan Gray
On Thu, Aug 25, 2005 at 07:54:45PM -0500, Qv6 wrote: I have just tried to use the following wireless usb network adapters with no luck. OpenBSD-3.7 does not recognize either: Belkin Wireless G Network adapter, model F5D7050 ver.2011 This is likely a ural(4) device, support was added

ThinkPad testers required

2005-08-27 Thread Jonathan Gray
Can people with the following laptops: - ThinkPad R50, R50p, R51, R52 - ThinkPad T41, T41p, T42, T42p, T43, T43p - ThinkPad X40 - ThinkPad X41, X41 Tablet Try running the latest snapshot (08/27/05 06:49:00) Check they have working aps via sysctl hw.sensors Numbers should change when tilting

Re: Which SATA controller to purchase

2005-09-27 Thread Jonathan Gray
On Tue, Sep 27, 2005 at 08:42:47AM -0500, Daniel A. Ramaley wrote: On Monday 26 September 2005 20:10, you wrote: Try this one out for size, I can vouch that it's super http://www.lsilogic.com/products/megaraid/sata_150_4.html Brandon Is there an LSI SATA card that doesn't have RAID and

Re: getting usb networking up on the Zaurus

2005-10-03 Thread Jonathan Gray
On Mon, Oct 03, 2005 at 08:26:35PM -0400, Chuck Robey wrote: Stuart Henderson wrote: --On 03 October 2005 17:19 -0400, Chuck Robey wrote: Add to this the fact that it works, to/from FreeBSD to the original Linux on the Zaurus, using cdce on both ends. Client (aka target) mode is where

Re: ATI SB200 USB ports on Toshiba Satellite

2005-10-08 Thread Jonathan Gray
On Sat, Oct 08, 2005 at 05:38:10PM +1000, Sophie wrote: Hi Chris and thanks for the reply. I know that if it's not loudly announced here there's a good chance it won't be looked at but my soundcard was in the same boat as the USB (It's an ATI IXP200 - also an uncommon beast - now works

Re: wireless pci card problem

2005-10-14 Thread Jonathan Gray
On Fri, Oct 14, 2005 at 10:29:01AM +0800, man Chan wrote: Hello, I got a pci wireless yesterday. After the installation, the system reported that the following message:- rtw0 at pci0 dev 8 function 0 Realtek 8185 rev 0x20: irq 11 rtw0: ver RTL8185, rtw0: could not recall EEPROM in

Re: Intel 6300ESB SATA

2005-10-23 Thread Jonathan Gray
On Sun, Oct 23, 2005 at 05:15:29PM -0600, Sibastien Taylor wrote: I am having problems having two SATA disks recognized by OpenBSD, the 6300ESB controller is found and seems to be configured properly but I get the error: pciide2: couldn't map channel 0 cmd regs pciide2: couldn't map

Re: Cisco Aironet 350 assistance

2005-11-01 Thread Jonathan Gray
On Tue, Nov 01, 2005 at 06:36:17AM -0600, Jared Solomon wrote: Hello, I have a not-exactly-new Panasonic Toughbook CF-72. OpenBSD 3.8 installs well after disabling ahc* at the UKC prompt in the second-stage boot. But, my aironet card isn't configured, and I'm not sure what I need to do

Re: HP proliant DL140-G3 install problems

2007-07-03 Thread Jonathan Gray
On Tue, Jul 03, 2007 at 06:26:42PM +0200, Reyk Floeter wrote: On Tue, Jul 03, 2007 at 04:18:35PM +0100, Doros Eracledes wrote: I am trying to install 4.1 amd64 on a proliant DL140-G3 server and have various problems. I've found on previous postings that the axe and uberry driver are

Re: Atheros AR2413A supported?

2007-07-09 Thread Jonathan Gray
On Mon, Jul 09, 2007 at 04:27:58PM -0400, Juan Miscaro wrote: I would like to know if this wireless network card is supported by OpenBSD 4.1: Atheros AR2413A The i386 h/w compatibility page* does not specifically mention this card. Does this mean that it is categorically not supported?

Re: typo in sys/dev/ic/rtl81x9reg.h ?

2007-07-22 Thread Jonathan Gray
On Sun, Jul 22, 2007 at 10:12:03PM +0200, Maxim Bourmistrov wrote: Hello! subject: #define RL_PSTATE_D00x #define RL_PSTATE_D10x0002 - typo ? #define RL_PSTATE_D20x0002 #define RL_PSTATE_D30x0003 /maxim Yes, but these a)

Re: wireless trouble (prism3 mini-pci)

2007-07-24 Thread Jonathan Gray
On Tue, Jul 24, 2007 at 06:12:03PM -0500, Ben Cornett wrote: Hi, I'm trying to get my wireless card working under 4.1. The machine is a Sony VAIO PCG-V505BCP. It has an Intersil PRISM3 PCI card that works fine under linux. According to the wi(4) manpage, this card appears to be

Re: USB MFP dilemma

2007-09-02 Thread Jonathan Gray
On Sun, Sep 02, 2007 at 12:23:16PM +0200, Antoine Jacoutot wrote: Hi. I'm actually playing with an Epson Stylus 4050 multifunction printer. The printer parts works as well as the scanner *but* not at the same time. I have to disable ulpt using config(8) and reboot if I want to be able to

Re: ZyXEL G-302 (rtw) lockup

2007-09-05 Thread Jonathan Gray
On Wed, Sep 05, 2007 at 11:43:44AM +0200, [EMAIL PROTECTED] wrote: HI all. I recently acquired a ZyXEL G-302 wireless card. OpenBSD ID's it as rtw. It shows up on ifconfig. But when I try and config this card, either via ifconfig or via hostname.rtw0, the whole machine locks hard. It does

Re: bioctl on X4100 M2

2007-09-07 Thread Jonathan Gray
On Fri, Sep 07, 2007 at 02:13:52AM -0400, Daniel Ouellet wrote: Hi, Not sure if I am missing something, most likely it's not implemented yet, but I was looking to see if I could check anything about a RAID 1 setup on Sun X4100 M2 so that it can be monitor somehow. I am not making progress

Re: ifconfig output for nfe

2007-09-19 Thread Jonathan Gray
On Wed, Sep 19, 2007 at 10:05:35PM -0400, Daniel Ouellet wrote: Hi, Looking on the man page, the ifconfig is suppose to show the stage of the network cards, and it can't show the proper configuration on the nfe cards, even if I force the configuration to fix value, I always get the same

Re: OpenBSD on decTOP?

2007-09-24 Thread Jonathan Gray
On Mon, Sep 24, 2007 at 07:43:21AM -0600, Diana Eichert wrote: Howdy all, Anyone tried OpenBSD on a decTOP? http://store.dataevolution.com/ProductDetails.asp?ProductCode=DT%2D7001CartID=1 Small, little, Geode system. The downside is there's no serial console, until of course you take a

Re: Porting OpenBSD to OLPC XO laptops.

2007-09-26 Thread Jonathan Gray
On Wed, Sep 26, 2007 at 01:58:16PM -0400, Joshua Smith wrote: Maybe I've missed something but what makes it impossible to write a device driver for the Wireless chipset? -Josh No one said it is impossible, it is just far harder than it should be due to a lack of documentation and companies

Re: arc0: unable to query firmware for sensor info

2007-09-28 Thread Jonathan Gray
On Fri, Sep 28, 2007 at 05:07:47PM +0200, Stephan A. Rickauer wrote: On Fri, Sep 28, 2007 at 08:35:10AM +1000, David Gwynne wrote: On 27/09/2007, at 8:06 PM, Stephan A. Rickauer wrote: A new server shippped by a local vendor fails to boot bsd.mp, with and without acpi enabled (amd64, 4.2).

Re: spdmem: what does PC25100 mean?

2007-10-08 Thread Jonathan Gray
On Tue, Oct 09, 2007 at 12:26:28AM +0300, Alexey Suslikov wrote: Hello [EMAIL PROTECTED] spdmem0 at iic0 addr 0x52 DDR2 SDRAM non-parity PC25100CL5 CL5 is CAS latency I think, but what does PC25100 mean here? :) Thanks. It seems the code was incorrectly using PC2 as a prefix in the DDR2

Re: NextG networking

2007-10-23 Thread Jonathan Gray
On Wed, Oct 24, 2007 at 12:18:36AM +1000, Andrew Dalgleish wrote: I've put up some notes about NextG networking on OpenBSD at http://www.ajd.net.au/nextg/openbsd.html including a kernel patch to suit ZTE handsets which will probably work with other Qualcomm-based handsets. Regards, Andrew

Re: pgt/Netgear WG511

2007-10-24 Thread Jonathan Gray
On Wed, Oct 24, 2007 at 12:32:19PM -0600, Daniel Melameth wrote: I have, what appears to be, v1 of this card, but I get the following from dmesg--even when booting from the latest snapshot of cd42.iso: Intersil, ISL3890, -, - (manufacturer 0xb, product 0x3890) Intersil Prism GT/Duette

Re: Buffalo WLI-U2-KG54-AI, ural not detected

2005-05-22 Thread Jonathan Gray
On Sun, May 22, 2005 at 05:21:39PM +0300, Jyry Suuntala wrote: Hello, I just purchased a Buffalo WLI-U2-KG54-AI for my Dell Latitude D800 laptop. I upgraded to OpenBSD 3.7, rebuilt my kernel (for ntfs support) and plugged in the device. The small storage area is detected but no wireless

Re: Recommened Wireless Cards?

2005-06-11 Thread Jonathan Gray
On Sat, Jun 11, 2005 at 03:44:59PM -0800, Kevin Elliott wrote: Hello. I need a new wireless card for my Sun Ultra5, OpenBSD 3.7-based router. My D-Link DWL-520 wireless card is supposed to be supported and is listed in the HCL but I cannot get it to work. Only rev A and rev B of the

Re: wireless usb

2005-06-26 Thread Jonathan Gray
On Sun, Jun 26, 2005 at 04:46:30AM -0500, Qv6 wrote: Folks, I'm trying to set up a wireless system and looking to use a wireless usb adapter. If anyone has successfully configured a wirelesss usb on obsd, please email me the make and model.

Re: wireless usb

2005-06-26 Thread Jonathan Gray
On Sun, Jun 26, 2005 at 05:26:21PM -0500, Qv6 wrote: On Sunday 26 June 2005 09:48 am, Jonathan Gray wrote: On Sun, Jun 26, 2005 at 04:46:30AM -0500, Qv6 wrote: http://www.openbsd.org/cgi-bin/man.cgi?query=uralapropos=0sektion=4 manpath=OpenBSD+Currentarch=i386format=html I am

Re: wireless usb

2005-06-28 Thread Jonathan Gray
On Tue, Jun 28, 2005 at 10:49:56AM -0300, Douglas Santos wrote: On Mon, Jun 27, 2005 at 03:05:47PM -0400, linc wrote: Date: Sun, 26 Jun 2005 17:26:21 -0500 From: Qv6 [EMAIL PROTECTED] To: misc@openbsd.org Subject: Re: wireless usb Message-ID: [EMAIL PROTECTED] I just don't

donations of rtw(4) devices with GCT radio required

2005-06-28 Thread Jonathan Gray
I now believe it would be possible to support rtw(4) devices incorporating GCT RF tranceivers, however I can't find any devices for sale here in Australia. If someone has one of the following they could send my way I'd appreciate it. Edimax EW-7126 PCI HomeLine HLW-PCC200 CardBus GigaFast

Re: D-Link DWL-G630 Support

2005-07-02 Thread Jonathan Gray
On Sat, Jul 02, 2005 at 09:25:14AM -0400, Seth Jackson wrote: I recently bought a D-Link DWL-G630 Rev. A1 at Radio Shack. I took the card home plugged it in to my laptop and this message was written to the console. Marvell Semiconductor, 88W8310 802.11g Cardbus PC Card, 83, 01

Re: Compiling for VIA Samuel 2 (CentaurHauls 686-class) 533 MHz

2005-07-17 Thread Jonathan Gray
On Sun, Jul 17, 2005 at 05:25:39PM +0100, matt lawless wrote: Hi, fed up of kernel panics on my EPIA 5000 I decided to make from source but can't find what settings use to get it to compile for this restricted processor. GCC borks when I try and compile it on the EPIA :

ICH7 users?

2005-07-22 Thread Jonathan Gray
If anyone has a newish Intel based motherboard using either the 82801GB (ICH7) or 82801GR (ICH7R) could they contact me off list for some questions that will likely lead to better support...

Re: iwi(4), possible to use 802.1x authentication?

2005-07-29 Thread Jonathan Gray
On Fri, Jul 29, 2005 at 05:40:24AM -0700, b h wrote: Hi, before I install openbsd on my laptop, I was curious if there is any method of getting wireless working with my companies infrastructure. I have the intel 2915a/b/g card, and only Cisco extensions and LEAP authentication is

Re: Using an ASUS K8S-MX a mistake?

2005-07-31 Thread Jonathan Gray
On Sun, Jul 31, 2005 at 02:10:34PM -0500, Joe Szedula wrote: I was trying to build a OpenBSD file server using an old 5U computer I was given. I purchased: - ASUS K8S-MX - AMD Athlon 64 Processor 2800+ - 512MB of RAM I was going to use a couple of older drives (10GB 3GB) I had around to

nForce SATA testers required

2005-08-04 Thread Jonathan Gray
Can people who are able to test SATA on any nForce board mail me off list?

Re: ASUS S8K motherboard + TSSTcorp, CD/DVDW problem

2005-08-05 Thread Jonathan Gray
On Fri, Aug 05, 2005 at 08:33:11PM +0200, Adam Papai wrote: Hello misc@ Yesterday I tried to install an OpenBSD 3.7-RELEASE to an ASUS S8K motherboard. The install cd failed to boot, because I get the following error: wd0 (pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0

Re: OpenBSD as a router for my ADSL ?

2005-11-13 Thread Jonathan Gray
On Sun, Nov 13, 2005 at 12:52:32PM +0300, Bruno Carnazzi wrote: Hi all, My all-in-one router/switch/ADSL modem/AP just crashed (power failure). Damned. Back to my USB modem :( I've also set an OpenBSD 3.8 box at home, on a Toshiba Laptop (4000CDS, PII-233MHz, 32Mo RAM, 4Go IDE HD). Let's

Re: linksys usb200m

2005-11-15 Thread Jonathan Gray
On Tue, Nov 15, 2005 at 09:54:02PM -0500, OpenBSD wrote: Hello, I got today a Linksys USB200M network adapter and it doesn't seem to be attaching to axe. Should I return it and look for something else, or is it possible to add it? It is an ASIX AX88772, while it should be possible to

Re: WLAN USB adapter (CNet CWD-854)

2005-11-17 Thread Jonathan Gray
On Thu, Nov 17, 2005 at 07:08:31PM +0100, Maxim Bourmistrov wrote: Any ideas what should I do to enable CWD-854? It suppose to be an ural, but it is not. No ural0 after generic USB. Did I miss something? Related lines from dmesg: ehci0 at pci0 dev 16 function 3 VIA VT6202 USB rev 0x82:

Re: speedtouch st121g usb nic

2005-11-17 Thread Jonathan Gray
On Fri, Nov 18, 2005 at 12:18:16AM +0100, Han Boetes wrote: Hi, My new ISP was so kind to provide me with a USB nic that goes along with the modem/natting-firewall/bridge with wireless support. It identifies itself in dmesg as: ugen0: BT 802.11g Wireless USB Adapter, rev 2.00/10.00,

Re: WLAN ath disassociate and 11g support

2005-12-03 Thread Jonathan Gray
On Sat, Dec 03, 2005 at 08:20:25PM +0100, Stefan wrote: Hello, i have just bought an Atheros mini-PCI card to put into my Soekris 4801 box. The card is recognized as: ath0 at pci0 dev 14 function 0 Atheros AR5212 rev 0x01: irq 11 ath0: AR5212 5.6 phy 4.1 rf5112 3.6, FCC1A, address

Re: Connecting Nokia (and other) phones to a pc

2005-12-14 Thread Jonathan Gray
On Wed, Dec 14, 2005 at 01:54:19PM +0200, Marius Van Deventer - Umzimkulu wrote: HI All I did a google search and found a little info, but nothing concise. Maybe I used the wrong parameters, I dunno... Anyway, my question. Have any of you had any success connecting a mobile phone to

Re: Connecting Nokia (and other) phones to a pc

2005-12-14 Thread Jonathan Gray
On Wed, Dec 14, 2005 at 03:30:51PM +0200, Marius Van Deventer - Umzimkulu wrote: -Original Message- From: Joachim Schipper [mailto:[EMAIL PROTECTED] Sent: 14 December 2005 02:30 PM To: misc@openbsd.org Subject: Re: Connecting Nokia (and other) phones to a pc On Wed, Dec

Re: CM9 problems with 802.11g (mode 11g)

2005-12-17 Thread Jonathan Gray
On Sat, Dec 17, 2005 at 02:23:00AM -0600, Bart Kus wrote: Hello, I believe this report is related to the one archived on: http://marc.theaimsgroup.com/?l=openbsd-miscm=113292366519249w=2 Where Robert Stepanek reports an issue with 11ag modes. However, my report is limited to 11g by

Re: MN-520 802.11b wireless PCMCIA card not found in -CURRENT on AMD Sempron?

2005-12-20 Thread Jonathan Gray
On Mon, Dec 19, 2005 at 10:57:44PM -0600, C. Bensend wrote: Hey folks, I've never been lucky enough to actually own my own laptop until yesterday, when a friend pointed me at a special at Staples. I picked up a Compaq Presario V2405US (AMD Sempron) for a pretty good price. Yes, I know,

Re: Airlink 101 Super G USB 2.0 Adapter support

2006-01-01 Thread Jonathan Gray
On Mon, Jan 02, 2006 at 12:00:12AM -0500, NetNeanderthal wrote: After searching through http://openbsd.org/i386.html#hardware and ath(4), I believe I have a currently (as of the latest snapshot) unsupported USB 2.0 802.11b/g adapter, the Airlink 101 Super G, based on the Atheros AR5523. The

Re: Trying to get rtw card to work: reset failed

2006-01-06 Thread Jonathan Gray
On Thu, Jan 05, 2006 at 09:04:32PM -0600, Peter Drauden wrote: I am trying to install OpenBSD 3.8 on my laptop (a HP n3410). The rtw(4) man page says my wireless card (a Netgear MA521) is supported. I booted from the install floppy and the card is not detected. I booted from an install CD I

Re: error on ifconfig, bssid

2006-01-12 Thread Jonathan Gray
On Fri, Jan 13, 2006 at 04:40:07AM +, Lucas Reddinger wrote: * Do you really want a bssid, or are you just looking for a network ID (nwid)? in a previous e-mail to misc, i said: there are three access points that i can pick up that have the same ssid [nwid]. is there a way to specify

Re: ral(4) how to determine what version of the PCI spec is supported

2006-01-14 Thread Jonathan Gray
On Sat, Jan 14, 2006 at 06:41:40PM +1030, Damon McMahon wrote: Greetings, I am considering purchasing an MSI PC54G2 PCI wireless adapter for a Pentium III machine which will run OBSD 3.7 . I note ral(4) states: PCI ral adapters seem to strictly require a system supporting PCI 2.2 or

Re: buslink pcmcia usb 2.0 card

2006-01-14 Thread Jonathan Gray
On Sat, Jan 14, 2006 at 10:43:23AM -0200, capereiragomes wrote: Hi, I need to connect an external hard disk, that is inside an usb enclosure, to an old notebook that has only usb

Re: ral(4) how to determine what version of the PCI spec is supported

2006-01-14 Thread Jonathan Gray
On Sat, Jan 14, 2006 at 05:35:08PM +, Jason George wrote: Greetings, I am considering purchasing an MSI PC54G2 PCI wireless adapter for a Pentium III machine which will run OBSD 3.7 . I note ral(4) states: PCI ral adapters seem to strictly require a system supporting PCI 2.2 or

Re: Securing an OpenBSD AP (or bridge, dunno)

2006-01-15 Thread Jonathan Gray
On Sun, Jan 15, 2006 at 12:10:13PM +0400, Bruno Carnazzi wrote: Hi all, I use an OpenBSD/i386 3.8 as a gateway for routing my residential ADSL access. I'm going to use an USB dongle (this is my last externel port available :( to provide some Wifi access for some laptops (mainly my

Re: openbsd on irix

2006-01-22 Thread Jonathan Gray
On Sun, Jan 22, 2006 at 09:43:56AM +0100, Lars Weste wrote: hi, reading http://www.openbsd.org/sgi.html, confuses a bit. at the top it is stated that the port will run at r4000 and up. at the bottom, in supported hardware, the r5000 is the smallest supported processor. Which statement

Re: running snapshot (obsd 3.9-beta), not able to compile GENERIC kernel

2006-01-22 Thread Jonathan Gray
On Sun, Jan 22, 2006 at 12:01:18PM +, Didier Wiroth wrote: Hi, I've installed (on a newly formated disk) openbsd 3.9-beta (snapshot from 19.1) on my laptop I've added a few packages from the snapshot/packages/i386 (kdebase etc...) Then I've fetched the latest sources: cvs -q -d

Re: Ralink - device timeout

2006-01-23 Thread Jonathan Gray
On Mon, Jan 23, 2006 at 12:36:46PM +0100, Joakim Aronius wrote: Hi Anders, From your dmesg: pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860 From RAL(4) CAVEATS PCI ral adapters seem to strictly require a system supporting PCI 2.2 or greater and will likely not work in systems based

Re: Wireless signal strength/quality on Ralink card?

2006-01-29 Thread Jonathan Gray
On Sun, Jan 29, 2006 at 04:15:22PM +0100, Jonas Fischer wrote: How do I see the wireless signal strength/quality on a ral interface in OpenBSD 3.8? wicontrol and ancontrol does not support ral interface and Ifconfig does not show it. :-( ifconfig -M ral0 if you are associated to an access

Re: SATA support in 3.8

2006-01-29 Thread Jonathan Gray
On Sun, Jan 29, 2006 at 04:43:18PM -0600, L. V. Lammert wrote: At 03:28 PM 1/29/2006 -0700, David Wilk wrote: Howdy all, I was just wondering what SATA support was like in 3.8. Specifically, are there any promise controller add-in cards (as opposed to built-in to mobo) that anyone would

Re: DVD burning, cdrloots, dvdrtools, dvd+rw_tools on OpenBSD-3.8

2006-01-31 Thread Jonathan Gray
On Tue, Jan 31, 2006 at 04:40:49PM +0500, Dmitry Slobodchikov wrote: Hi everybody-) I've got two burners: NEC ND-3540A PIONEER DVR-110D but I got ext lines by the both Based on: Cdrecord 1.11a15 (i386-unknown-openbsd3.8) Copyright (C) 1995-2001 JFrg Schilling scsidev: '/dev/dvd'

testers required for NVIDIA Ethernet driver

2006-02-06 Thread Jonathan Gray
So Damien Bergamini and I have put together a driver for the Ethernet controllers NVIDIA put out. They don't provide documentation or even have a list of names for the chips, but will happily agree to let various parties distribute a driver kludged around a binary blob. Suffice to say, we have

Re: netgear ma521

2006-02-10 Thread Jonathan Gray
On Sat, Feb 11, 2006 at 02:42:42AM +0100, Moritz Lutz wrote: Hi there, i got an problem here. I got an old laptop 100mhz 10,4. So there is no internal network interface so i want to run an wireless lan card in it (cardbus). But i don't get it work. I was already reading the OpenBSD FAQ

Re: Marvell Yukon 8036 Ethernet

2006-02-12 Thread Jonathan Gray
On Sun, Feb 12, 2006 at 03:55:33PM -0500, William Kranec wrote: Hello misc@, I recently purchased a laptop with a Marvell Yukon 8036 ethernet chip, which I haven't been able to get working (the interface does not appear in ifconfig output). The specific dmesg error looks like: skc0 at

Re: OpenSparc T1

2006-02-14 Thread Jonathan Gray
On Wed, Feb 15, 2006 at 12:04:12AM -0500, Daniel Ouellet wrote: No punch intended to anyone at all, but I was just curious about the new Sun T1 processor and initiative. They release today their spec and documentations on the Internet: http://opensparc.sunsource.net/nonav/opensparct1.html

Re: Ralink pci on spark64?

2007-03-31 Thread Jonathan Gray
On Sat, Mar 31, 2007 at 04:12:20PM +0200, Maxim Belooussov wrote: Hi, I plan to turn my Sun Ultra 10 into a firewall/access point using a supported Ralink PCI card. But I see on this page http://www.openbsd.org/sparc64.html#hardware that Ralink PCI is not supported by the port. ral man

Re: pciide: ATI IXP 600 SATA

2007-04-14 Thread Jonathan Gray
On Fri, Apr 13, 2007 at 06:27:52PM +0100, Stuart Henderson wrote: On 2007/04/13 13:57, alemao wrote: Is there any progress to support DMA on this chipset? ahci(4) is probably your best bet, but only JMicron and VT8251 are handled so far. Well only Intel and JMicron devices are known to

Re: Gigabyte miniPCI GN-WI01GS - will it work with ral(4) ?

2007-04-19 Thread Jonathan Gray
On Thu, Apr 19, 2007 at 03:55:10PM +0200, viq wrote: I wasn't able to find much either way... According to http://ralink.rapla.net/ it has RT2501 Turbo chipset, which consists of RT2527 RF chip and RT2561S BB/MAC chip (whatever that is). I don't care much for the 108 Mbps, but will it work at

Re: G5 Xserve wanted in Brisbane, Australia

2007-04-26 Thread Jonathan Gray
On Fri, Apr 27, 2007 at 12:30:24PM +1000, David Gwynne wrote: Chris Pascoe (pascoe@) and I (dlg@) have been working on improving ATA support in OpenBSD recently. We'd like to fix the SATA support on Apple's G5 machines, but we actually need one to be able to do that. If you can help by

Re: UMTS card almost recognized

2007-05-02 Thread Jonathan Gray
On Wed, May 02, 2007 at 10:28:55AM +0200, Massimo Lusetti wrote: Hi all, with my own CDs i freshly installed 4.1 on my laptop, everything is working smootly expect for an UMTS PCMCIA card which is not totally recognized. I think this is similar to the ones supported by ubsa(4). This is

Re: Decoding interface flags (ifconfig)

2007-05-05 Thread Jonathan Gray
On Fri, May 04, 2007 at 03:27:53AM -0700, Clint Pachl wrote: I'm curious if the flag bits, shown for each interface with ifconfig(8), can be decoded in order to reveal the characteristics of NICs, such as hardware RX/TX checksums and VLAN. So far I have searched: netintro(4) ifmedia(4)

Re: Remote console on Sun 2100 M2 not active

2007-05-06 Thread Jonathan Gray
On Sun, May 06, 2007 at 04:38:36AM -0400, Daniel Ouellet wrote: Hi, Is anyone have been able to get the redirect console working on the Sun 2100 M2 or not? Either the Ethernet management port or the serial port. The Ethernet port only work when OpenBSD is nor running, as soon as it half

Re: malo driver

2007-05-08 Thread Jonathan Gray
On Mon, May 07, 2007 at 10:27:15PM -0500, Default User wrote: On Sun, 2007-05-06 at 11:14 +0200, Henning Brauer wrote: * Default User [EMAIL PROTECTED] [2007-05-05 05:03]: cbb0 at pci1 dev 4 function 0 ENE CB-1410 CardBus rev 0x01pci_intr_map: no mapping for pin A : couldn't map

Re: USB200M (linksys) reporting device problem, disabling port

2007-06-27 Thread Jonathan Gray
On Wed, Jun 27, 2007 at 09:45:17PM -0400, Eric wrote: hello.. i just installed OpenBSD 4.1 from an original CD. My USB ethernet adapter, a Linksys USB200M is a known good working adapter (verified on Mac OS X 10.4 and FreeBSD 6.2). I am building a gateway with OpenBSD and this hardware

Re: Bad performance on ThinkPad T41 (-current checked out on July 1)

2007-07-03 Thread Jonathan Gray
On Tue, Jul 03, 2007 at 03:31:49AM +0200, Martin Toft wrote: I have run -current on my ThinkPad T41 laptop for nearly a year, and until now it has worked really well. Recently I bought a new disk for the machine and in connection with this I reinstalled OpenBSD using the most recent snapshot

Re: Bad performance on ThinkPad T41 (-current checked out on July 1)

2007-07-03 Thread Jonathan Gray
On Tue, Jul 03, 2007 at 01:49:09PM +0200, Martin Toft wrote: On Tue, Jul 03, 2007 at 04:32:13PM +1000, Jonathan Gray wrote: Include the output of 'atactl wd0' perhaps you have something like caching turned off. Also you can't hope for similiar results if you use different programs on both

Re: Wireless adaptor will not configure automatically, Netgear WPN311

2008-01-13 Thread Jonathan Gray
On Sun, Jan 13, 2008 at 07:05:35PM +1030, Hank . wrote: G'day I've just installed OpenBSD 4.1 on an old system i wish to make my firewall and WIFI access point. Why not something more recent? The problem i am experiencing is simple enough, the os is unable to verify my product. at least

Re: reboot(8) fails on Sun Fire X4100 M2 with latest i386.mp snapshot

2008-01-18 Thread Jonathan Gray
On Fri, Jan 18, 2008 at 05:17:26PM +0100, Rolf Sommerhalder wrote: Hello misc, after a successful upgrade of a X4100 M2 to the latest snapshot, the server fails to reboot after having issued the reboot(8) command as root. This was working fine before with the snapshot which was from early

Re: NXP ISP1362 USB Controller

2008-03-20 Thread Jonathan Gray
On Thu, Mar 20, 2008 at 12:59:32PM +0100, Vonarburg, David wrote: Is there any support for the NXP (formerly Philips) ISP1362 or similar USB controller in OpenBsd? Did not found anything so long even in NetSDB and FreeBSD. Thanks in advance David They should just work with the standard

Re: Ethernet on ASUS EEE PC?

2008-03-30 Thread Jonathan Gray
There have recently been some changes that make that driver work much better, try again with a newer snapshot in a few days. On Sat, Mar 29, 2008 at 07:55:16PM -0700, James Hartley wrote: As opposed to previous mention that the Ethernet interface is correctly identified on a 28 Jan -current

Re: Dell RAID controller

2008-04-17 Thread Jonathan Gray
On Thu, Apr 17, 2008 at 08:43:20AM -0300, John Nietzsche wrote: Dear gentleman, i am setting a dell server to run openbsd 4.3. I am aware dell perc 6i and 6e are supported, what about dell perc SAS 6e? Thank in advance. perc6e/i are sas controllers, you can plug either sata or sas disks

Re: issue on Attansic Technology L1 network card and OpenBSD

2008-04-29 Thread Jonathan Gray
On Tue, Apr 29, 2008 at 03:53:56PM +0200, Jonathan Schleifer wrote: Attansic was bought by Atheros IIRC, so maybe try asking there. Anyway, there's a GPL'd driver which was integrated into linux some time ago. This could be helpful for reverse engineering. Not supporting that chip isn't really

Re: Airlink101 awlc3026

2006-02-20 Thread Jonathan Gray
On Mon, Feb 20, 2006 at 07:38:32AM -0800, Benjamin Collins wrote: Anyone know what chipset is used in the awlc3026 card? It's on sale at Fry's for $8, and I wanted to get it for use in my OpenBSD laptop. Even better, anyone have a dmesg with this card listed? Marvell Libertas according to

Re: TEW-423PI WiFi Card in OpenBSD

2006-02-21 Thread Jonathan Gray
On Tue, Feb 21, 2006 at 05:28:40PM +0200, Alari Kask wrote: Hello, i have a Trendnet TEW-423PI 802.11g WiFi card, it seems to use a Texas Instrument chip, i only found information regarding TI not releasing open-source drivers and linux reverse- engineering. This is the part of the dmesg

Re: hardware: Sun x2100 test results

2006-02-22 Thread Jonathan Gray
On Wed, Feb 22, 2006 at 02:31:10PM +0100, Srebrenko Sehic wrote: For those interested, here are the preliminary results of my Sun x2100 tests. More hardware tests results available at http://www.armorlogic.com/oscl/ Issues with Sun X2100 running OpenBSD/amd64 (-current from 22/02/2006) 1)

nfe+ciphy testers urgently required

2006-02-27 Thread Jonathan Gray
If people have NVIDIA Ethernet controllers that attach Cicada/Vitesse PHYs ciphy(4), can you get in touch with me ASAP. I have a fix for a problem for you to test that will result in your adapter not working in 3.9 if it does not get comitted very soon.

Re: VIA VT6102 support?

2006-03-06 Thread Jonathan Gray
On Mon, Mar 06, 2006 at 03:27:42PM -0800, Iain Morgan wrote: Hello, I recently installed 3.8/amd64 on a Sempron-based system with a VIA VT6102 based network interface. The network interface was detected, but no carrier was found. Everything else worked fine. I don't see any reference to

Re: Ralink USB

2006-03-10 Thread Jonathan Gray
On Fri, Mar 10, 2006 at 04:54:08PM +1100, Rod.. Whitworth wrote: Today I received a D-Link DWL-G122 . Unfortunately it is not a v. B1 - it is C1. If the box (i386) is booted on a 3.9beta #617 with the device plugged in it gets a dmesg line that says: Ralink 802.11 bg WLAN Class 0/0, rev

Re: Ralink USB

2006-03-10 Thread Jonathan Gray
On Fri, Mar 10, 2006 at 09:18:10PM +1100, Rod.. Whitworth wrote: On Fri, 10 Mar 2006 20:42:44 +1100, Jonathan Gray wrote: On Fri, Mar 10, 2006 at 04:54:08PM +1100, Rod.. Whitworth wrote: Today I received a D-Link DWL-G122 . Unfortunately it is not a v. B1 - it is C1. If the box (i386

Re: Ralink USB

2006-03-10 Thread Jonathan Gray
On Sat, Mar 11, 2006 at 01:50:12PM +1100, Rod.. Whitworth wrote: On Fri, 10 Mar 2006 21:53:23 +1100, Jonathan Gray wrote: On Fri, Mar 10, 2006 at 09:18:10PM +1100, Rod.. Whitworth wrote: On Fri, 10 Mar 2006 20:42:44 +1100, Jonathan Gray wrote: On Fri, Mar 10, 2006 at 04:54:08PM +1100

Re: UPEK Fingerprint-Reader (ThinkPad Notebooks)

2006-03-19 Thread Jonathan Gray
On Mon, Mar 20, 2006 at 01:00:57AM +0100, OpenBSD Prospect wrote: Hi! I was wondering, if anybody knows, if / when the embedded fingerprint reader of certain ThinkPad notebooks (like in my T42p) will be supported in OpenBSD, since UPEK already officially supports Linux FreeBSD

Re: USB

2006-03-19 Thread Jonathan Gray
On Sun, Mar 19, 2006 at 08:13:33PM -0800, Dan Smythe wrote: I have a USB DVD drive and a USB hard drive that are running slowly. In my dmesg (attached) it says that I am using USB 1.0. Is this a limitation of my hardware, or doesn't OpenBSD 3.8 have USB 2.0 support yet? Thanks --dmesg---

Re: iich4 sound card problem on OpenBSD 3.8 / 3.9

2006-03-28 Thread Jonathan Gray
On Tue, Mar 28, 2006 at 08:22:08AM +0200, Szymon wrote: dmseg auich0 at pci0 dev 31 function 5 Intel 82801DB AC97 rev 0x03pci_intr_map: no mapping for pin B Notebook ASUS A3L Interrupt routing problems. There is no chance of people being able to help without a full dmesg.

Re: nfe(4) on amd64 (Asus A8N-E) update

2006-03-28 Thread Jonathan Gray
On Tue, Mar 28, 2006 at 12:41:04PM -0500, Blair Sadewitz wrote: IT WORKS NOW! The problem was one or more of the following: --The hardware has problems communicating with certain [half-duplex] 10Base-T devices. --The driver has issues with [half-duplex] 10-BaseT devices. --My half-duplex

Re: Soekris4801 drops to ddb on cu disconnect

2006-04-01 Thread Jonathan Gray
On Sat, Apr 01, 2006 at 04:47:46PM -0700, Diana Eichert wrote: I just got my first Soekris 4801 up and running today. I've been connected to the serial console on the 4801 using cu from another of my OpenBSD boxen. Several times when I've exited from cu and then reconnected the Soekris box

iwi in -current requires 3.0 firmware

2006-04-01 Thread Jonathan Gray
Just a heads up that iwi(4) in -current now requires the 3.0 firmware. We still can't include this in OpenBSD due to licensing issues and the driver currently isn't too picky about which version it attempts to load. You will run into some odd errors if you try run older versions with -current.

Re: Belkin wireless adapter

2006-04-04 Thread Jonathan Gray
On Wed, Apr 05, 2006 at 02:07:54AM +0100, pedro la peu wrote: The 0x705c has a ZyDAS ZD1211 chipset in it, the 0x7050 is Ralink. A Ralink based F5D7050 can be unambiguously identified via it's FCC ID. It will be printed on the device (and IIRC the box). FCC ID K7SF5D7050A is an RT25xx

Re: openbsd ports or pkgsrc

2006-04-13 Thread Jonathan Gray
On Thu, Apr 13, 2006 at 10:40:13AM +0200, Francois Visconte wrote: Hello everyone, Is there many people using pkgsrc on openbsd ? I'm using openbsd and netbsd. The openbsd base system is wonderfull but the ports lack some cool features that pkgsrc offers (security advisorys, easy

  1   2   3   4   5   6   >