virtual crossover link with vether(4) patch integration?

2011-07-09 Thread csszep
Hi! Is there any news about this patch integration? http://marc.info/?l=openbsd-techm=129622196824469w=2 And i'm sorry to bother you... thx Csszep

ciss(4) write very slow w/o bbwc

2012-05-29 Thread csszep
? My C and OpenBSD internals knowledge is not enough for this task. PS: Yes i know, my english is terrible. thx csszep

Re: ciss(4) write very slow w/o bbwc

2012-05-29 Thread csszep
Ok, but i installed Linux (Debian 6) and there is no performance degradation. I will install NetBSD too, and i will do a test. The commit does not turn on the cache, it enable tagged queing if i understand it well. thx csszep 2012/5/29 Jonathan Gray j...@jsg.id.au: I don't think that commit

Re: ciss(4) write very slow w/o bbwc

2012-05-29 Thread csszep
Hi! So i tested the ciss performance with Openbsd 5.1 and Netbsd 5.1.2 and the numbers are the same. :( approx 13Mbyte/s write with dd if=/dev/zero of=/dev/rsd1c bs=1m count=500 But why Linux is four times faster (approx 40Mbyte/s)? thx csszep 2012/5/29 csszep css...@gmail.com: Ok, but i

Re: ciss(4) write very slow w/o bbwc

2012-05-30 Thread csszep
is acceptable for me. The raw performace (eg. newfs) is not so important. Thx csszep 2012/5/29 Andreas Bartelt o...@bartula.de: Hello, On 05/29/12 17:28, Kenneth R Westerback wrote: On Tue, May 29, 2012 at 03:48:02PM +0200, csszep wrote: Hi! So i tested the ciss performance

Re: current snapshot pipex kernel panic

2012-09-26 Thread csszep
Thank you! It works as expected. Otherwise the mppe no option is missing from the manual page. 2012/9/26 YASUOKA Masahiko yasu...@yasuoka.net: Hello, On Tue, 25 Sep 2012 16:16:12 +0200 csszep css...@gmail.com wrote: I wanted to try a simple npppd setup and i got a panic. I'm looking

npppd with tun interface not work on i386?

2013-01-29 Thread csszep
(86722b7d28b15b50.a) swap on wd0b dump on wd0b clock: unknown CMOS layout thx csszep

Re: npppd with tun interface not work on i386?

2013-01-31 Thread csszep
Thx It works as expected. 2013/1/31 YASUOKA Masahiko yasu...@yasuoka.net: Hi, On Tue, 29 Jan 2013 20:20:24 +0100 csszep css...@gmail.com wrote: I tried to start npppd with the default config with tun0 interface on my Alix board: I get the following error message: # npppd -d 2013-01

ospfd 224.0.0.5: Can't assign requested address on rdomain 2

2015-12-28 Thread csszep
Hello! I created a simple ospf test lab, but i ran into the following error: The setup: ospfd.conf rdomain 2 area 0.0.0.0 { interface vio2 } route -T2 -n show Routing tables Internet: DestinationGatewayFlags Refs Use Mtu Prio Iface default

iked alternate location for the control socket?

2016-09-05 Thread csszep
Hello! In ikectl there is a "-s socket" parameter to change the control socket location. But in iked the "-s" parameter is missing, so you cannot change the socket location. This is not implemented in iked? It is useful if run two iked process in different rdomain. Thx csszep

Re: OpenBSD as an IKEv2 IPsec client with L/P authent

2018-02-23 Thread csszep
4281 packets for which no TDB was found I disabled it, and Strongswan works! openbsdvm1# sysctl net.inet.esp.enable=0 net.inet.esp.enable: 1 -> 0 openbsdvm1# sysctl net.inet.esp.udpencap=0 net.inet.esp.udpencap: 1 -> 0 Thx Csszep 2018-02-23 10:29 GMT+01:00 csszep <css...@gmail.co

Re: OpenBSD as an IKEv2 IPsec client with L/P authent

2018-02-23 Thread csszep
vm1 charon: 05[ESP]0: 01 02 03 04 05 06 07 08 09 0A.. Feb 23 11:25:58 openbsdvm1 charon: 05[ESP] padding length = 10, next header = 4 I'm here now Thx csszep 2018-02-22 12:50 GMT+01:00 Stuart Henderson <s...@spacehopper.org>: > On 2018/02/22 0

Re: OSPF over gif on top of IPsec transport -current

2018-03-14 Thread csszep
Hi! Will this fix be commit before 6.3 release? Thx csszep David Gwynne <d...@openbsd.org> ezt írta (időpont: 2018. márc. 13., K 23:41): > > > On 10 Mar 2018, at 08:01, Remi Locherer <remi.loche...@relo.ch> wrote: > > > > > > With below diff the setu

Re: Virtualbox vs latest snapshot

2018-04-10 Thread csszep
Hi! I'm using Virtualbox for years with OpenBSD guest without any serious issue. But of course maybe it's a Virtualbox bug. thx csszep 2018-04-10 11:51 GMT+02:00 Kevin Chadwick <m8il1i...@gmail.com>: > On Tue, 10 Apr 2018 10:50:27 +0200 > > > > There is a similar e

Virtualbox vs latest snapshot

2018-04-10 Thread csszep
Hi! I installed the latest 04.10 snapshot, the install procedure went fine, but after reboot the VM stucks at endless boot loop . It prints only the "booting hda0:/bsd" line.. before reboot The 04.03 snapshot works fine. There is a similar experience for someone with Virtualbox 5.2.8?

Re: Virtualbox vs latest snapshot

2018-04-10 Thread csszep
Yes with pure sw virtualization. With hardware virtualization enabled (vt-x,amd-v) not do it, and amd64 guests recommends hw virtualization. Anyway thanks, for the answers., i just want to know if i only have a problem. Thx csszep 2018-04-10 12:58 GMT+02:00 Kevin Chadwick <m8il1i...@gmail.

Re: IKEv2: CHILD_SA is not created

2021-05-21 Thread csszep
Hi! Not only Cisco ASA. Checkpoint, Fortinet, Juniper only support single set of subnets per CHILD_SA too. https://wiki.strongswan.org/projects/strongswan/wiki/Checkpoint https://wiki.strongswan.org/projects/strongswan/wiki/Fortinet https://wiki.strongswan.org/projects/strongswan/wiki/Juniper

Re: 10Gbit network work only 1Gbit

2021-02-26 Thread csszep
Hi! I miss something , or veb(4) ifconfig bits not yet commited ? OpenBSD 6.9-beta (GENERIC.MP) #358: Wed Feb 24 17:11:53 MST 2021 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP ifconfig veb0 create ifconfig: SIOCIFCREATE: Invalid argument Hrvoje Popovski ezt

Re: 10Gbit network work only 1Gbit

2021-02-26 Thread csszep
): Hrvoje Popovski ezt írta (időpont: 2021. febr. 26., P, 9:16): > On 26.2.2021. 9:00, csszep wrote: > > Hi! > > > > I miss something , or veb(4) ifconfig bits not yet commited ? > > > > OpenBSD 6.9-beta (GENERIC.MP) #358: Wed Feb 24 17:11:53 MST 2021 > >