Re: Behringer UMC404HD USB soundcard with OpenBSD 7.1.
On Sat, Jul 16, 2022 at 07:08:03PM +0200, Brian Durant wrote: > > On 7/16/22 6:26 PM, Alexandre Ratchov wrote: > > On Sat, Jul 16, 2022 at 05:37:35PM +0200, Brian Durant wrote: > > > On 7/16/22 3:54 PM, Alexandre Ratchov wrote: > > > > On Sat, Jul 16, 2022 at 03:36:18PM +0200, Brian Durant wrote: > > > > > # mixerctl -f /dev/audioctl1 > > > > > mixerctl: /dev/audioctl1: Device not configured > > > > > > > > > > # dmesg > > > > forgot to mention: connect and power on the audio interface first ;-) > > > It was. This time I waited until boot was complete, before connecting the > > > USB cable... > > > > > ... > > > > > uhub3: port 1, set config 0 at addr 6 failed > > > uhub3: device problem, disabling port 1 > > > > > sorry, I missed these lines, this is when you connected the device, > > right? > > > > The device doesn't even attach, so not surprising it doesn't work. I > > don't know what could cause this maybe weak power? > > > > Do you have an external power source, if not could you try with it? > I think so, I was multitasking at the time... Interesting and even more > interesting. Yes, the power supply that came with the unit is plugged in and > functioning on the UMC404HD. I had a UMC202HD lying around the house, that I > just tried, which is powered through the USB cable and that works fine with > OpenBSD. Only the powered UMC404HD had issues. > This reminds me a very basic MIDI keyboard (single usb1.1 bulk pipe) that caused the same "port disabled" problem on all of my machines. It managed to attach once every ~20 times though. IIRC, the host didn't manage to reload the the device descriptor. I tried to add delays at various places, tweak descriptor size, retry many times but this didn't help. It seems that the host did something that locks the device before the initial request to reload the descriptor. The device had a "programming mode" (hold a switch during attach), in which it always attached; this mode the keyboard was not usable, so probably not initialized. Interestingly, all the "port disabled" problems I encountered the last decade were caused by audio/MIDI equipment. The only specificity of the audio equipment is that it has big analog circuits that may consume more power and may take more time to settle. Cranking the relevant delay in usbd_new_device() didn't help. Cc'ing mpi@, just in case this rings a bell.
Re: Behringer UMC404HD USB soundcard with OpenBSD 7.1.
On Sat, Jul 16, 2022 at 05:37:35PM +0200, Brian Durant wrote: > On 7/16/22 3:54 PM, Alexandre Ratchov wrote: > > On Sat, Jul 16, 2022 at 03:36:18PM +0200, Brian Durant wrote: > > > > > > # mixerctl -f /dev/audioctl1 > > > mixerctl: /dev/audioctl1: Device not configured > > > > > > # dmesg > > forgot to mention: connect and power on the audio interface first ;-) > > It was. This time I waited until boot was complete, before connecting the > USB cable... > ... > > uhub3: port 1, set config 0 at addr 6 failed > uhub3: device problem, disabling port 1 > sorry, I missed these lines, this is when you connected the device, right? The device doesn't even attach, so not surprising it doesn't work. I don't know what could cause this maybe weak power? Do you have an external power source, if not could you try with it?
Re: Behringer UMC404HD USB soundcard with OpenBSD 7.1.
On 7/16/22 6:26 PM, Alexandre Ratchov wrote: On Sat, Jul 16, 2022 at 05:37:35PM +0200, Brian Durant wrote: On 7/16/22 3:54 PM, Alexandre Ratchov wrote: On Sat, Jul 16, 2022 at 03:36:18PM +0200, Brian Durant wrote: # mixerctl -f /dev/audioctl1 mixerctl: /dev/audioctl1: Device not configured # dmesg forgot to mention: connect and power on the audio interface first ;-) It was. This time I waited until boot was complete, before connecting the USB cable... ... uhub3: port 1, set config 0 at addr 6 failed uhub3: device problem, disabling port 1 sorry, I missed these lines, this is when you connected the device, right? The device doesn't even attach, so not surprising it doesn't work. I don't know what could cause this maybe weak power? Do you have an external power source, if not could you try with it? I think so, I was multitasking at the time... Interesting and even more interesting. Yes, the power supply that came with the unit is plugged in and functioning on the UMC404HD. I had a UMC202HD lying around the house, that I just tried, which is powered through the USB cable and that works fine with OpenBSD. Only the powered UMC404HD had issues.
Re: Behringer UMC404HD USB soundcard with OpenBSD 7.1.
On Sat, 16 Jul 2022 11:23:16 +0200 Alexandre Ratchov wrote: > On Sat, Jul 16, 2022 at 08:26:49AM +0200, Brian Durant wrote: > > I have thus far been using an audio direct out to my speakers, but would > > like to get my USB soundcard working in OpenBSD. Without the soundcard, > > (direct connection) everything works fine. With the soundcard, no audio at > > all. I have tried the following as per the OpenBSD FAQ: > > > > # rcctl set sndiod flags -f rsnd/0 -F rsnd/1 > > # rcctl restart sndiod > > sndiod(ok) > > sndiod(ok) > > > > I have rebooted the system, tried Cmixer and adjusted output gradually to > > 100%, but did not get any sound. I have consulted the list archive, but > > nothing, except to note what I already knew, that Behringer soundcards are > > class compliant. I use this card on Windows 11, Linux and FreeBSD, so I know > > that it works. I have made no major adjustments to the unit itself. Sooo, I > > have hit a bit of a dead end. Anyone out there that can provide some help? I > > am trying to get this to work by testing YouTube in Firefox, both of which > > work with a direct audio connection (midi jack cable)... > > could you send the output of: > > mixerctl -f /dev/audioctl1 > and: > dmesg I just tried connecting the soundcard to a Dell Vostro 3350 laptop running the same version of the OpenBSD system, just a week or two older. Things look pretty much the same on this computer as far as I can tell: # mixerctl -f /dev/audioctl1 mixerctl: /dev/audioctl1: Device not configured # dmesg OpenBSD 7.1 (GENERIC.MP) #0: Sun Apr 24 09:30:43 MDT 2022 r...@syspatch-71-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8471326720 (8078MB) avail mem = 8197312512 (7817MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb850 (57 entries) bios0: vendor Dell Inc. version "A07" date 09/30/2011 bios0: Dell Inc. Vostro 3350 acpi0 at bios0: ACPI 4.0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG SSDT SLIC HPET SSDT SSDT DMAR SSDT SSDT OSFR acpi0: wakeup devices USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2794.05 MHz, 06-2a-07 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz, 06-2a-07 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz, 06-2a-07 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz, 06-2a-07 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf800, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 3 (RP01) acpiprt2 at acpi0: bus 5 (RP02) acpiprt3 at acpi0: bus -1 (RP03) acpiprt4
Re: Behringer UMC404HD USB soundcard with OpenBSD 7.1.
On 7/16/22 3:54 PM, Alexandre Ratchov wrote: On Sat, Jul 16, 2022 at 03:36:18PM +0200, Brian Durant wrote: # mixerctl -f /dev/audioctl1 mixerctl: /dev/audioctl1: Device not configured # dmesg forgot to mention: connect and power on the audio interface first ;-) It was. This time I waited until boot was complete, before connecting the USB cable... # mixerctl -f /dev/audioctl1 mixerctl: /dev/audioctl1: Device not configured OpenBSD 7.1 (GENERIC.MP) #0: Sun Apr 24 09:30:43 MDT 2022 r...@syspatch-71-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8471175168 (8078MB) avail mem = 8197136384 (7817MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e20 (66 entries) bios0: vendor LENOVO version "EZKT22AUS" date 10/15/2013 bios0: LENOVO 10115 acpi0 at bios0: ACPI 5.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI HPET APIC MCFG WDAT BOOT ASPT DBGP FPDT MSDM SSDT SSDT acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, 1796.18 MHz, 06-3a-09 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, 1795.93 MHz, 06-3a-09 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, 1795.93 MHz, 06-3a-09 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, 1795.93 MHz, 06-3a-09 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus 4 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) acpipci0 at acpi0 PCI0: 0x0004 0x0011 0x0001 acpicmos0 at acpi0 "PNP0A05" at acpi0 not configured com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpibtn0 at acpi0: PWRB acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpitz0 at acpi0: critical temperature is 106 degC acpitz1 at acpi0: critical temperature is 106 degC acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD02 cpu0: using VERW MDS
Re: Behringer UMC404HD USB soundcard with OpenBSD 7.1.
On Sat, Jul 16, 2022 at 03:36:18PM +0200, Brian Durant wrote: > > > # mixerctl -f /dev/audioctl1 > mixerctl: /dev/audioctl1: Device not configured > > # dmesg forgot to mention: connect and power on the audio interface first ;-)
Re: Behringer UMC404HD USB soundcard with OpenBSD 7.1.
On 7/16/22 11:23 AM, Alexandre Ratchov wrote: On Sat, Jul 16, 2022 at 08:26:49AM +0200, Brian Durant wrote: I have thus far been using an audio direct out to my speakers, but would like to get my USB soundcard working in OpenBSD. Without the soundcard, (direct connection) everything works fine. With the soundcard, no audio at all. I have tried the following as per the OpenBSD FAQ: # rcctl set sndiod flags -f rsnd/0 -F rsnd/1 # rcctl restart sndiod sndiod(ok) sndiod(ok) I have rebooted the system, tried Cmixer and adjusted output gradually to 100%, but did not get any sound. I have consulted the list archive, but nothing, except to note what I already knew, that Behringer soundcards are class compliant. I use this card on Windows 11, Linux and FreeBSD, so I know that it works. I have made no major adjustments to the unit itself. Sooo, I have hit a bit of a dead end. Anyone out there that can provide some help? I am trying to get this to work by testing YouTube in Firefox, both of which work with a direct audio connection (midi jack cable)... could you send the output of: mixerctl -f /dev/audioctl1 and: dmesg # mixerctl -f /dev/audioctl1 mixerctl: /dev/audioctl1: Device not configured # dmesg OpenBSD 7.1 (GENERIC.MP) #0: Sun Apr 24 09:30:43 MDT 2022 r...@syspatch-71-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8471175168 (8078MB) avail mem = 8197160960 (7817MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e20 (66 entries) bios0: vendor LENOVO version "EZKT22AUS" date 10/15/2013 bios0: LENOVO 10115 acpi0 at bios0: ACPI 5.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI HPET APIC MCFG WDAT BOOT ASPT DBGP FPDT MSDM SSDT SSDT acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, 1796.23 MHz, 06-3a-09 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, 1795.92 MHz, 06-3a-09 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, 1795.93 MHz, 06-3a-09 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, 1795.93 MHz, 06-3a-09 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus 4 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1
Re: Behringer UMC404HD USB soundcard with OpenBSD 7.1.
On Sat, Jul 16, 2022 at 08:26:49AM +0200, Brian Durant wrote: > I have thus far been using an audio direct out to my speakers, but would > like to get my USB soundcard working in OpenBSD. Without the soundcard, > (direct connection) everything works fine. With the soundcard, no audio at > all. I have tried the following as per the OpenBSD FAQ: > > # rcctl set sndiod flags -f rsnd/0 -F rsnd/1 > # rcctl restart sndiod > sndiod(ok) > sndiod(ok) > > I have rebooted the system, tried Cmixer and adjusted output gradually to > 100%, but did not get any sound. I have consulted the list archive, but > nothing, except to note what I already knew, that Behringer soundcards are > class compliant. I use this card on Windows 11, Linux and FreeBSD, so I know > that it works. I have made no major adjustments to the unit itself. Sooo, I > have hit a bit of a dead end. Anyone out there that can provide some help? I > am trying to get this to work by testing YouTube in Firefox, both of which > work with a direct audio connection (midi jack cable)... could you send the output of: mixerctl -f /dev/audioctl1 and: dmesg
