Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-20 Thread Jonathan Matthew
On Thu, Aug 20, 2020 at 07:31:15AM -0400, Winfred Harrelson wrote: > On Wed, Aug 19, 2020 at 10:29:33AM +1000, Aaron Mason wrote: > > On Wed, Aug 19, 2020 at 12:00 AM Winfred Harrelson > > wrote: > > > > > > On Tue, Aug 18, 2020 at 04:53:42PM +1000, Jonathan Matthew wrote: > > > > > > > > This

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-20 Thread Winfred Harrelson
On Wed, Aug 19, 2020 at 10:29:33AM +1000, Aaron Mason wrote: > On Wed, Aug 19, 2020 at 12:00 AM Winfred Harrelson > wrote: > > > > On Tue, Aug 18, 2020 at 04:53:42PM +1000, Jonathan Matthew wrote: > > > > > > This sounds like multicast filters aren't working properly with your nic. > > > trunk(4)

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-18 Thread Aaron Mason
On Wed, Aug 19, 2020 at 12:00 AM Winfred Harrelson wrote: > > On Tue, Aug 18, 2020 at 04:53:42PM +1000, Jonathan Matthew wrote: > > > > This sounds like multicast filters aren't working properly with your nic. > > trunk(4) puts trunk ports in promisc mode, so multicast filters don't > > matter,

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-18 Thread Winfred Harrelson
On Tue, Aug 18, 2020 at 04:53:42PM +1000, Jonathan Matthew wrote: > On Mon, Aug 17, 2020 at 03:32:35PM -0400, Winfred Harrelson wrote: > > On Mon, Aug 17, 2020 at 03:40:47PM +0200, Hrvoje Popovski wrote: > > > On 17.8.2020. 11:46, Stuart Henderson wrote: > > > > On 2020-08-15, Hrvoje Popovski

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-18 Thread Jonathan Matthew
On Mon, Aug 17, 2020 at 03:32:35PM -0400, Winfred Harrelson wrote: > On Mon, Aug 17, 2020 at 03:40:47PM +0200, Hrvoje Popovski wrote: > > On 17.8.2020. 11:46, Stuart Henderson wrote: > > > On 2020-08-15, Hrvoje Popovski wrote: > > >> On 15.8.2020. 0:48, Hrvoje Popovski wrote: > > >>> On

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-17 Thread Winfred Harrelson
On Mon, Aug 17, 2020 at 03:40:47PM +0200, Hrvoje Popovski wrote: > On 17.8.2020. 11:46, Stuart Henderson wrote: > > On 2020-08-15, Hrvoje Popovski wrote: > >> On 15.8.2020. 0:48, Hrvoje Popovski wrote: > >>> On 12.8.2020. 15:18, Winfred Harrelson wrote: > On Tue, Aug 11, 2020 at 07:52:10PM

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-17 Thread Hrvoje Popovski
On 17.8.2020. 11:46, Stuart Henderson wrote: > On 2020-08-15, Hrvoje Popovski wrote: >> On 15.8.2020. 0:48, Hrvoje Popovski wrote: >>> On 12.8.2020. 15:18, Winfred Harrelson wrote: On Tue, Aug 11, 2020 at 07:52:10PM +0100, Tom Smyth wrote: > Hi Winfred, > the intel 710 is a complex

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-17 Thread Stuart Henderson
On 2020-08-15, Hrvoje Popovski wrote: > On 15.8.2020. 0:48, Hrvoje Popovski wrote: >> On 12.8.2020. 15:18, Winfred Harrelson wrote: >>> On Tue, Aug 11, 2020 at 07:52:10PM +0100, Tom Smyth wrote: Hi Winfred, the intel 710 is a complex card, I would suggest that you try updating the

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-15 Thread Hrvoje Popovski
On 15.8.2020. 0:48, Hrvoje Popovski wrote: > On 12.8.2020. 15:18, Winfred Harrelson wrote: >> On Tue, Aug 11, 2020 at 07:52:10PM +0100, Tom Smyth wrote: >>> Hi Winfred, >>> the intel 710 is a complex card, I would suggest that you try updating the >>> firmware on the card, available from

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-14 Thread Hrvoje Popovski
On 12.8.2020. 15:18, Winfred Harrelson wrote: > On Tue, Aug 11, 2020 at 07:52:10PM +0100, Tom Smyth wrote: >> Hi Winfred, >> the intel 710 is a complex card, I would suggest that you try updating the >> firmware on the card, available from intel.com or your card vendor, >> you may have to boot to

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-13 Thread Winfred Harrelson
On Wed, Aug 12, 2020 at 02:54:36PM +0100, Tom Smyth wrote: > What is the Switch telling you about the LACP ? This is a Cisco switch running Nexus not IOS so I am not quite as familiar with it as the IOS ones so I may have a few things wrong here. Also, you are asking for a lot of into so this is

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-12 Thread Tom Smyth
What is the Switch telling you about the LACP ? can you do a show port-channel show port-channel detailed sho port-channel summary on the switch you are lagging with ? can you also do a sho run int port-channel ? sho run int ethernet x,y where x and y are the interfaces on the switch are

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-12 Thread Winfred Harrelson
On Tue, Aug 11, 2020 at 10:13:41PM +0200, Remi Locherer wrote: > On Tue, Aug 11, 2020 at 02:07:32PM -0400, Winfred Harrelson wrote: > > I know others are using the new aggr(4) interface but I am having a > > problem with trying to use it on some new servers I have recently > > gotten. Hoping I

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-12 Thread Winfred Harrelson
On Tue, Aug 11, 2020 at 07:52:10PM +0100, Tom Smyth wrote: > Hi Winfred, > the intel 710 is a complex card, I would suggest that you try updating the > firmware on the card, available from intel.com or your card vendor, > you may have to boot to a live linux cd to apply the firmware update, > >

Re: aggr(4) not working with Intel XXV710 SFP28 on a Supermicro X11DPi-N(T)

2020-08-11 Thread Remi Locherer
On Tue, Aug 11, 2020 at 02:07:32PM -0400, Winfred Harrelson wrote: > I know others are using the new aggr(4) interface but I am having a > problem with trying to use it on some new servers I have recently > gotten. Hoping I could get some help from someone here since my > searches have not been