This is 5.8-current on an ALIX (dmesg below), used as my home router. The upstream connection is an ethernet, the other two ethernets are the internal network and the dmz, plus there is a ral(4) wifi.
I am experiencing errors and device timeouts on the ral. hans@gw:~$ ifconfig ral0 ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:11:09:0d:d3:36 priority: 4 groups: wlan media: IEEE802.11 autoselect hostap (autoselect mode 11b hostap) status: active ieee80211: nwid stare.cz chan 11 bssid 00:11:09:0d:d3:36 wpakey <not displayed> wpaprotos wpa1,wpa2 wpaakms psk wpaciphers tkip,ccmp wpagroupcipher tkip 100dBm inet 192.168.112.1 netmask 0xffffff00 broadcast 192.168.112.255 hans@gw:~$ netstat -i Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Colls lo0 32768 <Link> 3229 0 3229 0 0 lo0 32768 fe80::%lo0/ fe80::1%lo0 3229 0 3229 0 0 lo0 32768 localhost/1 localhost 3229 0 3229 0 0 lo0 32768 127/8 localhost 3229 0 3229 0 0 vr0 1500 <Link> 00:0d:b9:12:9f:2c 34776087 0 24076275 0 0 vr0 1500 192.168.167 192.168.167.1 34776087 0 24076275 0 0 vr1 1500 <Link> 00:0d:b9:12:9f:2d 16420441 0 27179401 0 0 vr1 1500 192.168.111 gw.stare.cz 16420441 0 27179401 0 0 vr2 1500 <Link> 00:0d:b9:12:9f:2e 7785814 0 7597590 0 0 vr2 1500 192.168.222 192.168.222.1 7785814 0 7597590 0 0 ral0 1500 <Link> 00:11:09:0d:d3:36 488808 62712 657003 14631 0 ral0 1500 192.168.112 192.168.112.1 488808 62712 657003 14631 0 enc0* 0 <Link> 0 0 0 0 0 pflog0 33192 <Link> 0 0 163817 0 0 What can I do to debug this? Is there a way to tell which client (there is two androids and a macbook) this happened to? Thank you for your time Jan OpenBSD 5.8-current (GENERIC) #1092: Mon Aug 24 11:58:09 MDT 2015 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 432 MHz cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW real mem = 133713920 (127MB) avail mem = 118882304 (113MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 12/10/07, BIOS32 rev. 0 @ 0xfceb2 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xe0000/0xa800 cpu0 at mainbus0: (uniprocessor) mtrr: K6-family MTRR support (2 registers) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31 glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 00:0d:b9:12:9f:2c ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:0d:b9:12:9f:2d ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address 00:0d:b9:12:9f:2e ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 ral0 at pci0 dev 12 function 0 "Ralink RT2560" rev 0x01: irq 9, address 00:11:09:0d:d3:36 ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c gpio0 at glxpcib0: 32 pins iic0 at glxpcib0 pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <ELITE PRO CF CARD 8GB> wd0: 1-sector PIO, LBA, 7279MB, 14909328 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0, legacy support ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 15 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 isa0 at glxpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 nvram: invalid checksum vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (bf940e6c7aaf2c50.a) swap on wd0b dump on wd0b clock: unknown CMOS layout ral0: device timeout ral0: device timeout ral0: device timeout ral0: device timeout ral0: device timeout