Re: action "relay" relay src "ip"
Hi, no problem :-) 13 août 2019 17:39 mailingli...@dotbit.ro a écrit: > Hi Gilles, > > Problem solved - it was my routes + pf that were the problem. > > Sorry for the noise and thank you for giving me confidence in that relay src > works. > > BR, Dimitrios > > On Tue, Aug 13, 2019 at 08:35:07AM +, gil...@poolp.org wrote: > >> You need to provide the full configuration otherwise we can't troubleshoot. >> >> Given that I use the relay src feature on a daily basis and that my mail > > infrastructure relies on it, >> I would venture to say the problem is with your setup.
Re: action "relay" relay src "ip"
Hi Gilles, Problem solved - it was my routes + pf that were the problem. Sorry for the noise and thank you for giving me confidence in that relay src works. BR, Dimitrios On Tue, Aug 13, 2019 at 08:35:07AM +, gil...@poolp.org wrote: > You need to provide the full configuration otherwise we can't troubleshoot. > > Given that I use the relay src feature on a daily basis and that my mail infrastructure relies on it, > I would venture to say the problem is with your setup.
Re: action "relay" relay src "ip"
You need to provide the full configuration otherwise we can't troubleshoot. Given that I use the relay src feature on a daily basis and that my mail infrastructure relies on it, I would venture to say the problem is with your setup. Gilles 13 août 2019 10:28 mailingli...@dotbit.ro a écrit: > Hello, > > I have one machine doing packet forwarding, nat and smtpd. > I have two internet providers and I want to receive mails on em2 and send > mails on em1. > > dotbit# uname -a > OpenBSD dotbit.ro 6.5 GENERIC.MP#3 amd64 > > I receive on em2 with no problems using the following: > listen on em2 port 25 tag EXT > match tag EXT for domain from any action "deliver_local" > > but I seem to fail to send from em1: > action "relay" relay src "86.34.153.250" > > dotbit# ifconfig em1 > em1: flags=8843 mtu 1500 > lladdr 0c:c4:7a:51:6d:c2 > description: Group 3 down. Romtelekom HP router port3 > index 2 priority 0 llprio 3 > groups: egress > media: Ethernet autoselect (100baseTX full-duplex) > status: active > inet 86.34.153.250 netmask 0xfff8 broadcast 86.34.153.255 > > dotbit# ifconfig em2 > em2: flags=8843 mtu 1500 > lladdr 0c:c4:7a:51:6d:c3 > description: Group 3 up. Orange. Connect to GE1 on Huawei router. > index 3 priority 0 llprio 3 > groups: egress > media: Ethernet autoselect (1000baseT full-duplex) > status: active > inet 109.166.210.10 netmask 0xfffc broadcast 109.166.210.11 > > dotbit# route -n show|grep default > default 109.166.210.9 UGS 12 3936306 - 8 em2 > default 86.34.153.249 UGS 0 0 - 12 em1 > > Note: The em1 route has lower priority. > > If I send an e-mail using this setup to gmail I receive an e-mail from ip > 109.166.210.10 (em2) > > If I have a "pass out on em1" and send mail using the above setup I get: > Aug 13 07:54:24 dotbit smtpd[15641]: ee7e33319534dd82 mta connecting > address=smtp://98.137.159.26:25 host=mta-v42.mail.vip.ne1.yahoo.com > Aug 13 07:54:24 dotbit smtpd[15641]: ee7e33319534dd82 mta error > reason=Connection failed: > Permission denied > Aug 13 07:54:24 dotbit smtpd[15641]: smtp-out: Disabling route 86.34.153.250 > <-> 98.137.159.26 > (mta-v42.mail.vip.ne1.yahoo.com) for 15s > > but it I also have "pass out on em2" the mail gets sent from em2 > (109.166.210.10). > > I do not need a solution for me personally, bit I think it should be possible > to chose where to > send from. > I only need this is temporary fix until my new provider assigns me reverse > dns, > then I can send and receive from the same route. > > Thanks for smtpd, Dimitrios
action "relay" relay src "ip"
Hello, I have one machine doing packet forwarding, nat and smtpd. I have two internet providers and I want to receive mails on em2 and send mails on em1. dotbit# uname -a OpenBSD dotbit.ro 6.5 GENERIC.MP#3 amd64 I receive on em2 with no problems using the following: listen on em2 port25 tag EXT match tag EXT for domain from any action "deliver_local" but I seem to fail to send from em1: action "relay" relay src "86.34.153.250" dotbit# ifconfig em1 em1: flags=8843 mtu 1500 lladdr 0c:c4:7a:51:6d:c2 description: Group 3 down. Romtelekom HP router port3 index 2 priority 0 llprio 3 groups: egress media: Ethernet autoselect (100baseTX full-duplex) status: active inet 86.34.153.250 netmask 0xfff8 broadcast 86.34.153.255 dotbit# ifconfig em2 em2: flags=8843 mtu 1500 lladdr 0c:c4:7a:51:6d:c3 description: Group 3 up. Orange. Connect to GE1 on Huawei router. index 3 priority 0 llprio 3 groups: egress media: Ethernet autoselect (1000baseT full-duplex) status: active inet 109.166.210.10 netmask 0xfffc broadcast 109.166.210.11 dotbit# route -n show|grep default default109.166.210.9 UGS 12 3936306 - 8 em2 default86.34.153.249 UGS00 -12 em1 Note: The em1 route has lower priority. If I send an e-mail using this setup to gmail I receive an e-mail from ip 109.166.210.10 (em2) If I have a "pass out on em1" and send mail using the above setup I get: Aug 13 07:54:24 dotbit smtpd[15641]: ee7e33319534dd82 mta connecting address=smtp://98.137.159.26:25 host=mta-v42.mail.vip.ne1.yahoo.com Aug 13 07:54:24 dotbit smtpd[15641]: ee7e33319534dd82 mta error reason=Connection failed: Permission denied Aug 13 07:54:24 dotbit smtpd[15641]: smtp-out: Disabling route 86.34.153.250 <-> 98.137.159.26 (mta-v42.mail.vip.ne1.yahoo.com) for 15s but it I also have "pass out on em2" the mail gets sent from em2 (109.166.210.10). I do not need a solution for me personally, bit I think it should be possible to chose where to send from. I only need this is temporary fix until my new provider assigns me reverse dns, then I can send and receive from the same route. Thanks for smtpd, Dimitrios
