On Thu, Mar 21, 2019 at 9:25 AM Aleksander Morgado
wrote:
>
> >
> > Yeah, mixed feelings from me too. I guess before we do that, can we ask
> > what commands people want to use? I'd rather it not be used a short
> > circuit for stuff that could be fixed in MM or implemented fairly
> > easily for
"Bowden, Brendan" writes:
> We're looking at using the AT port to get a few status values that
> don't appear to be readily available from QMI. One we need in
> particular is device temperature (there's a hardware failure condition
> that manifests as a very high temperature value). Of course
Some modems (Namely: Telit LE910 V2) report nonzero NwError code,
outside of 3GPP TS 24.008 - in "register-state set command-done" response,
while status code equals MBIM_STATUS_ERROR_NONE.
In such cases network is operational.
According to MBIM specification 1.0 table 10.5.9.8 "Status codes",
>
> Yeah, mixed feelings from me too. I guess before we do that, can we ask
> what commands people want to use? I'd rather it not be used a short
> circuit for stuff that could be fixed in MM or implemented fairly
> easily for a device. That's my only reservation, that having it may
> reduce the
> We're looking at using the AT port to get a few status values that don't
> appear to be readily available from QMI. One we need in particular is device
> temperature (there's a hardware failure condition that manifests as a very
> high temperature value). Of course any hints on how to pull
> From: ModemManager-devel boun...@lists.freedesktop.org> On Behalf Of Dan Williams
> Sent: Thursday, March 21, 2019 10:20 AM
> To: Aleksander Morgado ; 王道之
>
> Cc: ModemManager (development) de...@lists.freedesktop.org>
> Subject: Re: How other applications use the ports that occupied by MM
>
On Mon, 2019-03-18 at 11:24 +0100, Aleksander Morgado wrote:
> Hey,
>
> > I am trying to find a way to use the AT ports or mbim ports that
> > occupied by MM as all the device ports were used by MM. eg. I want
> > send AT command to the modem, but MM occupies the AT port. Is there
> > any way to
Hi Aleksander,
Thank you for such a swift response!
I will post updated patch shortly, after testing updated changes locally.
W dniu 21.03.2019 o 13:42, Aleksander Morgado pisze:
> Hey!
>
> See comments below.
>
> On Thu, Mar 21, 2019 at 1:14 PM Lech Perczak
> wrote:
>> Some modems (Namely:
Hey!
See comments below.
On Thu, Mar 21, 2019 at 1:14 PM Lech Perczak
wrote:
>
> Some modems (Namely: Telit LE910 V2) report nonzero NwError code,
> outside of 3GPP TS 24.008 - in "register-state set command-done" response,
> while status code equals MBIM_STATUS_ERROR_NONE.
> In such cases
Some modems (Namely: Telit LE910 V2) report nonzero NwError code,
outside of 3GPP TS 24.008 - in "register-state set command-done" response,
while status code equals MBIM_STATUS_ERROR_NONE.
In such cases network is operational.
According to MBIM specification 1.0 table 10.5.9.8 "Status codes",
10 matches
Mail list logo