On Sat, 2017-03-25 at 21:39 +0100, Aleksander Morgado wrote:
> The operator code (MCCMNC) may also be given encoded in the current
> charset (e.g. UCS2).
LGTM.
Dan
> Based on a patch from Colin Helliwell >
> ---
> plugins/altair/mm-broadband-modem-altair-lte.c
On Sat, 2017-03-25 at 21:39 +0100, Aleksander Morgado wrote:
> The method doing the operator name normalization takes as input the
> current configured modem charset. If this is UCS2, we will now just
> assume this is a hint: the string may or may not come in hex/UCS2.
>
> This logic makes the
On Sat, 2017-03-25 at 19:32 +0100, Aleksander Morgado wrote:
> Hey Dan, Daniele, Carlo & everyone,
>
> This series of patches tries to implement proper flow control
> settings on the serial port, and is based on letting MM detect which
> are the supported modes with AT+IFC=?. This makes it
On Fri, 2017-03-31 at 21:09 +, Jan Graczyk wrote:
> Hello Dan,
>
> There is no problem with connecting to this modem (mini PCIe Quectel
> UC20 modem module) from kermit and sending AT commands. However when
> I issue the following commands:
>
> mmcli -m 0 --simple-disconnect
> mmcli -m 0
Hello Dan,
There is no problem with connecting to this modem (mini PCIe Quectel UC20 modem
module) from kermit and sending AT commands. However when I issue the following
commands:
mmcli -m 0 --simple-disconnect
mmcli -m 0 --simple-connect="pin=1234,apn=internet"
the ModemManager sends
On Fri, 2017-03-31 at 20:35 +, Jan Graczyk wrote:
> Hello All,
>
> I have a problem with ModemManager failing to find primary AT port.
> Her is the ModemManager debug log:
What kind of modem is this?
Does it require a specific baud rate and/or serial settings?
Can you talk to the modem
Hello All,
I have a problem with ModemManager failing to find primary AT port. Her is the
ModemManager debug log:
root@linaro-alip:~# ModemManager --debug&
[1] 1574
root@linaro-alip:~# ModemManager[1574]: [1490989871.011911]
[main.c:140] main(): ModemManager (version 1.4.0) starting in
Hello All,
I have a problem with getting the proper signal level from ModemManager. Here
is the Linux console output from ModemManager -debug session:
ModemManager[1580]: [1490979773.483400] [mm-broadband-modem.c:1991]
modem_load_signal_quality(): loading signal quality...
ModemManager[1580]:
On Fri, 2017-03-31 at 07:23 +, Thomas Lang wrote:
> I will check this today.
> I tried a MC 7710 as well same problem --location-status gives that
> 3g location is enabled when I try --location-get I get not
> available.
> Does the MC 7710 have the same problem as the Ericsson one?
If it's
I will check this today.
I tried a MC 7710 as well same problem --location-status gives that 3g location
is enabled when I try --location-get I get not available.
Does the MC 7710 have the same problem as the Ericsson one?
-Ursprüngliche Nachricht-
Von: Aleksander Morgado
10 matches
Mail list logo