On Tue, 2018-04-10 at 15:08 +0200, Aleksander Morgado wrote:
> Distributions wanting to use a different filter policy than the
> DEFAULT one were advised to patch themselves the corresponding init
> files.
>
> We now allow doing this directly at configure time by using a new
>
On Tue, 2018-04-10 at 19:58 +, Matthew Starr wrote:
> > -Original Message-
> > From: Dan Williams [mailto:d...@redhat.com]
> > Sent: Tuesday, April 10, 2018 1:17 PM
> > To: Matthew Starr; modemmanager-devel@lists.freedesktop.org
> > Subject: Re: [PATCH] u-blox: ignore non-AT ttyACM
russ@russ-Studio-1745:/tmp$ sudo qmi-firmware-update --update-qdl -d
1199:9090 SWI9X50C_01.05.01.00.cwe
SWI9X50C_01.05.01.00_GENERIC_001.028_000.nvu
error: No serial device found to run QDL update operation
russ@russ-Studio-1745:/tmp$ sudo qmi-firmware-update --update-qdl -d 1199
On Tue, 2018-04-10 at 17:30 +, Matthew Starr wrote:
> For the TOBY-R2, LISA-R2, and LARA-R2, the only valid AT ports are
> ttyACM0, ttyACM1, and ttyACM2. All other ttyACM ports cause MM to
> wait 20-30 seconds probing the port on startup.
>
> Ignoring the non-AT ttyACM ports allows MM to not
For the TOBY-R2, LISA-R2, and LARA-R2, the only valid AT ports are
ttyACM0, ttyACM1, and ttyACM2. All other ttyACM ports cause MM to
wait 20-30 seconds probing the port on startup.
Ignoring the non-AT ttyACM ports allows MM to not wait 20-30 seconds
probing and therefore startup much faster with
Distributions wanting to use a different filter policy than the
DEFAULT one were advised to patch themselves the corresponding init
files.
We now allow doing this directly at configure time by using a new
`--with-filter-policy=[POLICY]' option that accepts one of "default",
"strict", "paranoid"