Very small sample (my own PC), but I have upgraded Win7 to Win8 in place
without an issue. So, it's possible the options for doing in place
upgrades are getting better. For a large scale deployment, I would likely
always do a USMT capture of data and a fresh OS install. That seems to
just make
I've seen this happen when the detection method isn't quite right. Maybe
check the detection method on the application?
Jeff
On Wed, Jun 12, 2013 at 10:45 AM, Christopher Catlett
ccatl...@greektowncasino.com wrote:
So I followed the office 2013 deployment guide below:
In a ConfigMgr 2007 environment, I have a OSD task sequence that is
randomly failing. The point at which it fails is during a package
installation. The package fails with a MSI 1603 error. Under normal
circumstances, I would enable verbose MSI logging, run the package, grab
the log and find the
the format you should be good. We do all our logging in c:\temp.
** **
*Daniel Ratliff*
** **
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Wednesday, June 26, 2013 10:52 AM
*To:* mssms@lists.myitforum.com
]
on behalf of Jeff Poling [jeffpol...@yahoo.com]
*Sent:* Monday, July 08, 2013 3:28 PM
*To:* mssms@lists.myitforum.com
*Subject:* Re: [mssms] RE: ZTIWindowsUpdate.wsf
Can you send a screenshot or list of the TS steps? Looking at the logs,
everything seems to complete as expected. I'd like
Chris,
Did you get anywhere with this?
Just curious. . .
Jeff
On Mon, Jul 8, 2013 at 4:35 PM, Jeff Poling jeffpol...@yahoo.com wrote:
I have seen a TS not complete when ConfigMgr does not initiate the
reboot. I wonder if the ztiwindowsupdate script does a reboot and the TS
does
I am planning a potential migration from ConfigMgr 2007 to 2012. The
environment has secondary sites in 2007, but I would like to collapse that
into one primary site with DPs at the remote locations.
Can I re-purpose the 2007 secondary site servers? Or upgrade them as only
DPs? Where do I find
source
hierarchy to a site in the destination hierarchy.
** **
** **
** **
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Wednesday, July 31, 2013 1:05 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms
You can use the OCT to set the AUTO_ACTIVATE property to 1 and Office will
automatically activate.
Jeff
On Tue, Aug 6, 2013 at 4:20 PM, Jason Sandys ja...@sandys.us wrote:
You should initiate activation during deployment.
** **
There is a simple vbs script that is part of the Office
.
** **
Rmdir /q “c:\program files\etc\etc”
** **
*Daniel Ratliff*
** **
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Thursday, August 08, 2013 11:58 AM
*To:* mssms@lists.myitforum.com
*Subject:* Re: [mssms
I've read the options for DR/HA - http://technet.microsoft
.com/library/hh846246.aspx - and now I am trying to put the concepts to
practical use in a design. I realize the answer is different for each
organization, but I was wondering what the typical recommendations are for
DR/HA considerations
If you do not want users to interact with the installation, why is there a
requirement to show the progress bar? I typically deploy office completely
silently with no end-user interaction.
Jeff
On Fri, Aug 16, 2013 at 5:03 AM, Raja hotmail rajan@hotmail.com wrote:
My program should start
-
*From: *Jeff Poling [jeffpol...@yahoo.com]
*Sent: *Thursday, September 05, 2013 05:57 PM Eastern Standard Time
*To: *mssms@lists.myitforum.com
*Subject: *[mssms] CM07 with MDT to CM12 migration
I am migrating a CM07 environment to CM12. A MDT integrated task sequence
is failing to migrate. My
In a brand new ConfigMgr 2012 SP1 environment, the distmgr.log is recording
the following error periodically:
Failed to get encrypted PXE password
Packages distribute just fine, no obvious issues in the environment.
I did migrate content from a 2007 environment, if that makes a difference.
Just
I have an odd issue in migrating from CM07/MDT2010 to CM12/MDT2012SP1. An
OSD task sequence executes the ZTIWindowsUpdate.wsf script from MDT. In
the CM07 environment, it works without issue. In CM12, it fails due to not
being able to verify digital signatures for third-party publishers. The
: [mssms] ZTIWindowsUpdate.wsf and WSUS
** **
Although not recommended by MS you can run a gpupdate from the ts.
Cmd /c gpupdate /force /wait:0
-Daniel Ratliff
-Original Message-
*From: *Jeff Poling [jeffpol...@yahoo.com]
*Sent: *Tuesday, September 10, 2013 06:11 PM Eastern
This is one of those questions for which I feel I should know the answer
but am having a hard time wrapping my brain around. In CM12, how do I
determine the number of boundary groups I need? I've read
http://technet.microsoft.com/en-us/library/gg712679.aspx but it does not
seem to give any
:* Re: [mssms] Boundaries and Boundary Groups
** **
That's what we do and it works well.
On Sep 17, 2013 10:22 AM, Jeff Poling jeffpol...@yahoo.com wrote:
This is one of those questions for which I feel I should know the answer
but am having a hard time wrapping my brain around
If this is for clients, the CU2 install process on your server gives the
option to create update packages. You can then deploy them to
collections. Or looking at the package would give you the install string.
Jeff
On Sep 18, 2013 6:57 AM, Roland Janus roland.ja...@hispeed.ch wrote:
Is there a
From Technet:
http://technet.microsoft.com/en-us/library/jj822981.aspx#BKMK_UpgradeR2Considerations
Configuration Manager supports installing System Center 2012 R2
Configuration Manager to upgrade a site that runs Configuration Manager SP1
Also here:
I'm not even sure where to start searching for an answer on this. . .I did
a collection migration from CM07 to CM12 SP1 and brought over the packages,
advertisements, etc. This environment has a number of mandatory
advertisements that came over as required deployments in CM12. When I
upgraded a
On one of the clients, check the wuahandler.log to see if GPOs are
overriding the ConfigMgr client. . .
Jeff
On Thu, Sep 19, 2013 at 3:08 PM, Trevor Sullivan tsul...@gmail.com wrote:
Kevin,
** **
You shouldn’t be using any GPOs if you’re using ConfigMgr to deploy
software updates.
Try this search in Bing: (migration) site:
technet.microsoft.com/en-us/library meta:search.MSCategory(gg682056)
The community has worked hard and provided a ton of information that is
pretty easily accessible via a quick Bing or Google search. You could take
a look at some of the links below:
[
mailto:listsad...@lists.myitforum.com listsad...@lists.myitforum.com] *On
Behalf Of *Jeff Poling
*Sent:* Thursday, September 19, 2013 2:24 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] CM07-CM12 Migration Question
** **
I'm not even sure where to start searching for an answer
of having the *always rerun* setting set, as
someone else found that because of that machines started rerunning the
advertisement after the migration.
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Tuesday, September 24, 2013
My understanding is that execution history only is migrated when doing
collection migrations.
You can migrate advertisements from a supported Configuration Manager 2007
source site to the destination hierarchy by using collection-based
migration. If you upgrade a client, it retains the history of
I am at a site where clients are unable to download content from a DP. THe
datatransferservice.log shows:
Successfully sent location services HTTP failure
message. DataTransferService 10/3/2013 11:36:21 AM 4532 (0x11B4)
Error sending DAV request. HTTP code 600, status
'' DataTransferService
have and affect on client downloads
On Oct 3, 2013 9:46 AM, Jeff Poling jeffpol...@yahoo.com wrote:
I am at a site where clients are unable to download content from a DP.
THe datatransferservice.log shows:
Successfully sent location services HTTP failure
message. DataTransferService 10/3/2013
...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Thursday, October 3, 2013 11:46 AM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] DP Issue
** **
I am at a site where clients are unable to download content from a DP.
THe datatransferservice.log shows
, we just started getting this same issue at our east coast
location... Same errors in the log files.
** **
Just that location though. I'll let you know if we figure this out.
** **
On Thu, Oct 3, 2013 at 12:57 PM, Jeff Poling jeffpol...@yahoo.com
wrote:
It's a vanilla IIS
I've seen this before and updating the membership on All Systems fixes it.
Though updating All Systems might have an impact depending on how many
devices are in your environment.
On Thu, Oct 3, 2013 at 8:30 PM, Richard Zuraff
richard.zur...@genmills.comwrote:
During our imaging process we add
...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Monday, October 07, 2013 11:13 AM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] ConfigMgr 2012 Remote Control
** **
First, as a caveat, I know that the scenario described below
** **
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Monday, October 07, 2013 11:13 AM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] ConfigMgr 2012 Remote Control
** **
First, as a caveat, I know
In the scratching one's head category. . . in my current environment, there
is an application that runs in the background (system tray). The app can
be brought to the foreground using a key combination: ctrl - ctrl.
After upgrading to CM12, when connecting to a client via remote control,
the app
I am migrating from CM07 to CM12. Yesterday, I upgraded a CM07
distribution point in-place. In Distribution Point Migration, it shows the
upgrade as successful; however, if I look at content that is targeted to
the DP that was upgraded, all of the packages show the content as In
Progress for
.
The smsdpprov.log does seem to stop abruptly, though.
Any thoughts?
Thanks,
Jeff
On Wed, Oct 9, 2013 at 9:01 AM, Jeff Poling jeffpol...@yahoo.com wrote:
I am migrating from CM07 to CM12. Yesterday, I upgraded a CM07
distribution point in-place. In Distribution Point Migration, it shows
Have you tried manually doing an AD Group discovery?
On Thu, Oct 17, 2013 at 8:40 AM, Brian McDonald mcdonald...@hotmail.comwrote:
I am attempting to create 2 collections for my Microsoft Office 2013
installation.
In AD, I have created the following domain local security groups:
It appears that in ConfigMgr 2012 SP1, the SMS Agent Host and Configuration
Manager Remote Control services are configured with a startup type of
Automatic (Delayed Start). This is causing some frustration in my
current environment because there will be a delay of several minutes before
a remote
:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Tuesday, October 22, 2013 1:32 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] CM12 Client Startup Type
** **
It appears that in ConfigMgr 2012 SP1, the SMS Agent Host and
Configuration Manager Remote Control services
In CM07, task sequences were exported as an XML file. I used this method
to format the XML for documentation purposes:
http://blogs.technet.com/b/deploymentguys/archive/2008/08/17/documenting-your-task-sequences-automagically.aspx
In CM12, the export is different. Is there any way that is
-and-powershell/
** **
*Daniel Ratliff*
** **
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Monday, October 28, 2013 3:37 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] TS Exports in CM12
** **
In CM07, task
Look at this:
http://www.windows-noob.com/forums/index.php?/topic/6799-using-system-center-2012-configuration-manager-part-9-deploying-monthly-updates/
But make sure to review any of the guides before that one as well.
Jeff
On Tue, Nov 12, 2013 at 12:17 PM, nani varma nanim...@gmail.com wrote:
I am grasping at straws here. . .I have 7 sites with ConfigMgr 2012 SP1 CU2
distribution points. The OS on the servers is Windows Server 2008 R2. PXE
is failing with a TFTP timeout. THe error code is PXE-E32 TFTP Open
timeout.
I just was informed abut this issue, and I guess it has been
] *On Behalf Of *Jeff Poling
*Sent:* Thursday, January 09, 2014 12:06 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] PXE Issues
I am grasping at straws here. . .I have 7 sites with ConfigMgr 2012 SP1
CU2 distribution points. The OS on the servers is Windows Server 2008 R2.
PXE is failing
On Thu, Jan 9, 2014 at 12:23 PM, Jeff Poling jeffpol...@yahoo.com wrote:
WDS is running. . . and this is occurring on multiple distribution points.
. .
Thanks,
Jeff
On Thu, Jan 9, 2014 at 11:09 AM, Brucker, Chris
chris.bruc...@bankatfirst.com wrote:
Can you verify that WDS
In CM12 SP1, I have a program that needs to execute at logon for users
across the environment (I know this can be done using a logon script, but
using CM12 is a requirement at this particular location).
I have an assignment configured with the trigger of at logon as well as the
rerun behavior set
TechNet has documentation on creating reports using the views in the
configmgr DB: http://technet.microsoft.com/en-us/library/dn581954.aspx
Jeff
On Fri, Jan 24, 2014 at 12:53 PM, christopher.catl...@us.sogeti.com wrote:
What do you want to report on?
They are just SSRS reports, nothing
This blog has a good description of what is what as far as the app catalog
and software center:
http://blogs.technet.com/b/configmgrteam/archive/2012/03/31/introducing-the-application-catalog-and-software-center-in-system-center-2012-configuration-manager.aspx
Jeff
On Mon, Feb 10, 2014 at
For a package to appear in the application catalog, it needs to be deployed
as Available and to a user collection. Is that how you are deploying your
pacakge?
Thanks,
Jeff
On Mon, Feb 10, 2014 at 2:11 PM, Linkey, Mike mlin...@icc.illinois.govwrote:
How do you setup a package to appear
The context it runs in is a function of how the program is configured (The
environment tab on the program that is part of your package).
Jeff
On Mon, Feb 10, 2014 at 2:24 PM, Linkey, Mike mlin...@icc.illinois.govwrote:
We that explains a little bit.
Second question from this one is will
that as the option
is greyed out.
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Monday, February 10, 2014 2:43 PM
*To:* mssms@lists.myitforum.com
*Subject:* Re: [mssms] Can you publish a Package in SCCM 2012 to the
software catalog
of these
packages as applications then.
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Tuesday, February 11, 2014 9:03 AM
*To:* mssms@lists.myitforum.com
*Subject:* Re: [mssms] Can you publish a Package in SCCM 2012
We have a remote site distribution point (CM12 SP1) and possibly will need
to restore the content drive. I reviewed the backup and recovery Technet
info and did not see anything for that specific scenario. Is there
anything special that needs to be done if restoring the content drive on a
DP?
(if it's not there
anymore).
J
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Tuesday, February 18, 2014 2:23 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] DP Content Restore
We have a remote site distribution
?
*Daniel Ratliff*
*From:* listsad...@lists.myitforum.com [
mailto:listsad...@lists.myitforum.com listsad...@lists.myitforum.com] *On
Behalf Of *Jeff Poling
*Sent:* Wednesday, February 19, 2014 10:38 AM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] CM12 Client Issues after OSD
?
*Daniel Ratliff*
*From:* listsad...@lists.myitforum.com [
mailto:listsad...@lists.myitforum.com listsad...@lists.myitforum.com] *On
Behalf Of *Jeff Poling
*Sent:* Wednesday, February 19, 2014 10:38 AM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] CM12 Client Issues after OSD
On one
: [mssms] CM12 Client Issues after OSD
Have you checked provisioning mode?
*Daniel Ratliff*
*From:* listsad...@lists.myitforum.com [
mailto:listsad...@lists.myitforum.com listsad...@lists.myitforum.com] *On
Behalf Of *Jeff Poling
*Sent:* Wednesday, February 19, 2014 10:38 AM
*To:* mssms
Have you checked the wuahandler.log on the problem PC?
Jeff
On Thu, Feb 20, 2014 at 1:27 PM, Ryan Shugart rshug...@mii.com wrote:
Thanks. I think the language pack is in my deployment. I took a
Windows 7 fresh install, had it scan and install updates, and it got IE9
with no issues, so
I need to configure and rollout 70-80 branch distribution points in CM07.
Any content on the DPs needs to be pre-staged. What is the best option to
accomplish this? Or what have you done in a similar scenario?
I know there are probably multiple options such as deploying a base Windows
image to
mentioned in this e-mail. J
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Tuesday, March 4, 2014 1:47 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] CM07 Branch DP Rollout
I need to configure and rollout 70-80
.
Script to copy a package list to the SMSPKG$
Send the machine to the remote location
Once client is back up we would declare it as BDP in Sccm.
--
Sent from Mailbox https://www.dropbox.com/mailbox for iPad
On Tue, Mar 4, 2014 at 11:45 PM, Jeff Poling jeffpol...@yahoo.com wrote:
Richard,
We
to an existing one.
- copy folders containing packages from the central DP (based on a list)
Le 5 mars 2014 16:13, Jeff Poling jeffpol...@yahoo.com a écrit :
Jeremy,
Did you script creation of the SMSPKGdrive letter$ share also?
Thanks,
Jeff
On Tue, Mar 4, 2014 at 4:48 PM, Jeremy
In a native mode site, after an OSD task sequence is finished, the
ConfigMgr client cannot get policy. After significant review of logs, I
determined it is because the certificate from the local PKI does not get
installed prior to the ConfigMgr client install. It seems that after
waiting 10-20
I have an OSD task sequence in COnfigMgr 2012 that uses the
ztiWindowsUpdate.wsf script from MDT 2012 SP1 (the customer does not use
software updates in ConfigMgr). I am attempting to exclude the Windows
Updates that require multiple reboots. So far, I have added the
WUMU_ExcludeKB001= lines to
Ben,
I ran into something similar and this KB article solved it:
http://support.microsoft.com/kb/975710
Try setting the MaximumBlockSize to something smaller using the registry
entry in the article.
Thanks,
Jeff
On Wed, Apr 2, 2014 at 10:34 AM, Ben Glenz gl...@cwd-solution.com wrote:
I am having an issue at a site where a machine will be imaged using OSD in
ConfigMgr 2007. After the OSD process, the remote tools will propt for
credentials. What I found is that the ccmexec log shows:
*Failed to add ConfigMgr Remote Control Users group to the DCOM ACL*
If I look at the COM
I am preparing my first R2 upgrade and have a few questions:
1. For the ADK, do I use the latest version found here:
http://www.microsoft.com/en-US/download/details.aspx?id=39982
2. I have automatic client upgrade enabled. Is there anything else that
needs done for clients to upgrade? This is
...@lists.myitforum.com [
mailto:listsad...@lists.myitforum.com listsad...@lists.myitforum.com] *On
Behalf Of *Jeff Poling
*Sent:* Friday, April 25, 2014 12:24 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] ConfigMgr TS and Multi-Reboot Updates
I am struggling to deal with the issue of Windows
...@lists.myitforum.com] *On
Behalf Of *Jeff Poling
*Sent:* Friday, April 25, 2014 12:24 PM
*To:* mssms@lists.myitforum.com
*Subject:* [mssms] ConfigMgr TS and Multi-Reboot Updates
I am struggling to deal with the issue of Windows Updates that require
multiple reboots killing task sequences. In my
I have not done an Office 2013 deployment yet, and it sounds like you
already tried doing the uninstall of 2010 as part of the 2013 install;
however, in the past, I use OCT to customize my Office install and set the
behavior to uninstall previous Office versions. Can you do the uninstall
that way
I agree with Chris that browser history in a report is not a good idea.
You can get the browsers installed by using the Asset Intelligence report
Software 02D - Computers with a Specific Software Installed.
If you want to do something custom, I am using the query below to create a
report that
Of *Jeff Poling
*Sent:* Thursday, May 01, 2014 10:42 AM
*To:* mssms@lists.myitforum.com
*Subject:* Re: [mssms] How to get a list of browsers, versions, plug-ins,
and browser history?
I agree with Chris that browser history in a report is not a good idea.
You can get the browsers installed
PXE requires a server OS.
Jeff
On Tue, May 6, 2014 at 8:40 AM, Chris Carbone chris.carb...@fmsand.comwrote:
We have a bunch of Windows 7 DP’s and wanted to start using PXE on some
of them. Can you use Windows 7 DP and enable PXE or is at least server 2008
required for WDS etc?
This
A couple resources:
http://www.windows-noob.com/forums/index.php?/topic/4045-system-center-2012-configuration-manager-guides/
http://www.deploymentresearch.com/Research/tabid/62/EntryId/113/The-Hydration-Kit-for-ConfigMgr-2012-R2-is-available-for-download.aspx
Jeff
On Fri, May 9, 2014 at 1:26
Having been responsible for a mid-size VMware farm in the past, I would
agree that this is not advisable; however, I am curious what motivates the
question? What do you need to accomplish that requires the hypervisor to
have a ConfigMgr client?
Actually, as I wrote this, it hit me that this may
At that point, it is moving the user files to the new location, so it is
going to depend on how much data is involved. Looks like there is a group
policy setting for Windows 8 that can help:
http://technet.microsoft.com/en-us/library/jj649080.aspx
Jeff
On Thu, May 22, 2014 at 12:49 PM, Jimmy
I second what Chris mentioned. Also check out the following:
*Client Installation Dependencies*
http://technet.microsoft.com/en-us/library/gg682042.aspx
*Windows Firewall Requirements*
http://technet.microsoft.com/en-us/library/gg682180.aspx
In a nutshell, you need the required ports open on
Check out some of the suggestions in this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/f23e349e-b4f6-4d7a-8d08-0782d327ac37/sccm-iis-webdav-request-filtering?forum=configmgrgeneral
Jeff
On Thu, May 29, 2014 at 2:05 PM, Ryan Shugart rshug...@mii.com wrote:
Well I’m
Nice work! Congratulations!
On Fri, May 30, 2014 at 9:08 AM, Barnes,Chris cbar...@penskeautomotive.com
wrote:
Hey guys – I passed the 70-243 (SCCM 2012) test yesterday, couldn’t have
done it without this list.
A big thank you to everyone out there that is willing to take time out of
I found the following to be really useful (along with real-life experience
and a lab environment):
http://social.technet.microsoft.com/wiki/contents/articles/7075.system-center-2012-configuration-manager-survival-guide-en-us.aspx
CBTNuggets is a really good option. I used the referenced Nugget and
learned a lot. If you are looking for information specific to R2, check
out Channel 9:
http://channel9.msdn.com/events/TechEd/NorthAmerica/2014/PCIT-B215#fbid=
There may be other options on Channel 9 as well.
Jeff
On Tue,
Here's another option on Channel 9:
http://channel9.msdn.com/Events/TechEd/NewZealand/2013/WCL303
Jeff
On Mon, Jun 2, 2014 at 11:58 PM, Hun boy hun@outlook.com wrote:
Is there any CBT for ConfigMgr 2012 R2
Is it possible to provide a page/site where we can go to get a list of
versions and build numbers? For SQL Server, there is a page
http://support.microsoft.com/kb/321185 that at least provides the ability
to dig through and find build numbers.
Perhaps something on the technet Wiki could be
This article gives a good summary of what shows in Software Center:
http://blogs.technet.com/b/configmgrteam/archive/2012/03/31/introducing-the-application-catalog-and-software-center-in-system-center-2012-configuration-manager.aspx
For your scenario, unless you checked the box on the program to
Is the task sequence deployed to a collection of which the known computer
is a member? Is the deployment available to media and PXE?
Jeff
On Thu, Jun 19, 2014 at 2:51 PM, Trevor Sullivan tsul...@gmail.com wrote:
Have you looked at the smspxe.log, to see why they’re getting rejected? I
am
If the PC that is failing PXE is indeed in a collection to which the task
sequence is deployed, you might want to double check to make sure there are
not duplicate records for that machine in ConfigMgr. I've been in
environments where a duplicate record is created and the machine I think is
in
Removing PXE from the DP will remove the WDS role from the server.
Jeff
On Fri, Jun 20, 2014 at 1:11 PM, Taxter, Latisha ltax...@kh.org wrote:
I don’t have to remove wds role and re-install?
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of
Are Chrome and Evince packages or applications in ConfigMgr? The answer
determines which log files to look at on the client - packages look at
execmgr.log, applications look at appdiscovery.log and appenforce.log.
http://technet.microsoft.com/en-us/library/hh427342.aspx
As others have said,
to register something?
--Matt Ross
Ephrata School District
Jeff Poling jeffrey.d.pol...@gmail.com , 6/24/2014 11:28 AM:
Are Chrome and Evince packages or applications in ConfigMgr? The answer
determines which log files to look at on the client - packages look at
execmgr.log
.
If the client is not yet registered, this is expected
behavior.]LOG]!time=09:23:18.783+420 date=06-24-2014
component=execmgr context= type=2 thread=2980
file=softdistpolicy.cpp:1405
Do I have to register something?
--Matt Ross
Ephrata School District
Jeff Poling jeffrey.d.pol...@gmail.com
I have an issue in CM07 with a task sequence failing. THe issue is with
refresh scenarios. A large number of the PCs are starting the TS in
Windows, then starting the reboot to Windows PE. After the reboot, the
PC's disk is failed and the task sequence does not continue. It does not
even try
My time was limited yesterday, but to answer your questions. . .
* I eliminated an unnecessary USMT group in the task sequence. It was
using hard linking and I wanted to make sure that process was not causing
issues.
* Only one mode of PC was tested (old COmpaq DC 5750)
* The environment is
I can't provide any help other than the fact that I see this in an
environment I migrated as well. If anyone has insight or suggestions, I
would also be grateful!
Thanks,
Jeff
On Tue, Jul 29, 2014 at 10:04 AM, Rick rickhambri...@hotmail.com wrote:
We are in the process of moving from SCCM
*From:* listsad...@lists.myitforum.com [
mailto:listsad...@lists.myitforum.com listsad...@lists.myitforum.com] *On
Behalf Of *Jeff Poling
*Sent:* Tuesday, July 29, 2014 10:13 AM
*To:* mssms@lists.myitforum.com
*Subject:* Re: [mssms] SCCM Distribution Point migration issue
I can't provide
...@lists.myitforum.com listsad...@lists.myitforum.com] *On
Behalf Of *Jeff Poling
*Sent:* Tuesday, July 29, 2014 10:13 AM
*To:* mssms@lists.myitforum.com
*Subject:* Re: [mssms] SCCM Distribution Point migration issue
I can't provide any help other than the fact that I see this in an
environment I migrated
that are in process and then evaluates all of them as
complete. Just an FYI this is a known bug now within the migrations. I am
guessing they will work on a solution for it.
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent
Thanks!
On Wed, Jul 30, 2014 at 3:49 PM, Mitchell, Steven R
steven.r.mitch...@ehi.com wrote:
I will ask my TAM and see what he sends me back.
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Wednesday, July 30, 2014 3:47
My task sequence logs seem to be quite large and are rolling/overwriting.
This prevents me from seeing the entire scope of the task sequence in the
logs. So, I changed the client installation properties to include
CCMLOGMAXSIZE = 5242880 and CCMLOGMAXHISTORY = 2.
The history is now correct, but
-log-in-system-center-configuration-manager.aspx
On Thursday, 31 July 2014, Jeff Poling jeffrey.d.pol...@gmail.com wrote:
My task sequence logs seem to be quite large and are
rolling/overwriting. This prevents me from seeing the entire scope of the
task sequence in the logs. So, I changed
Midwest Management Summit http://mms.mnscug.org/
*November 10-12, 2014 http://mms.mnscug.org/*
*From:* listsad...@lists.myitforum.com [mailto:
listsad...@lists.myitforum.com] *On Behalf Of *Jeff Poling
*Sent:* Thursday, July 31, 2014 1:56 PM
*To:* mssms@lists.myitforum.com
*Subject
1 - 100 of 201 matches
Mail list logo
