I just installed a WinTV card using the bttv drivers on Suse 10. I can
watch tv on the card via SUSE TV apps, but have issue on Myth.
The card setup without issue and mythtv-setup even was able to correctly
scan the channels. However when I goto watch that input I get the
following on the
On Thu, 26 Jan 2006, Michael T. Dean wrote:
Set your input to start on channel 1000.
Same problme, the issue I think is that it is trying to change the
channel, but it is a VCR on that input, there is no channel to change to.
-Nathan
___
I am trying to manually record Video from my VCR. I went into mythtv setup
and setup a video source called VCR and then manually created a channel
and for good measure added a year long program guide entry. However when I
go to manually record I get the following error.
I think the following
Has anyone looked at adding support for HAI OmniPro Home automation system
to Myth?
Chuck Cannon has GCC library that supports HAI over Ethernet or Serial,
you can find it at:
http://home/austin.rr.com/ccannon7/downloads.htm
Anyone interested in making this happen? I would be willing to help
On Mon, 23 Jan 2006, Big Wave Dave wrote:
Looks like you meant:
http://home.austin.rr.com/ccannon7/downloads.htm
The URL didn't show up right in my email
Sorry about that.
Dave
On 1/23/06, Nathan Allen Stratton [EMAIL PROTECTED] wrote:
Has anyone looked at adding support for HAI
On Tue, 24 Jan 2006, Johan [ISO-8859-1] Kihlström wrote:
Check out pluto (http://www.plutohome.com) or MisterHouse
(http://www.misterhouse.org) if you feel the need for home automation...
Yep, I am aware of others, but I have HAI OmniPro installed already : )
HAI also has most of the share of
On Mon, 23 Jan 2006, Mark Johannessen wrote:
There is also XTension (www.shed.com) on the Mac OSX side. I will
also be looking at integrating Myth into HA, but only as a slave to
the HA system.
Interesting, but again I have HAI OmniPro installed in my house. I went
with HAI because of the
On Mon, 23 Jan 2006, Yeechang Lee wrote:
Ross Campbell [EMAIL PROTECTED] says:
My MythTV box is now at around 600gb and that seems like just about
enough storage for me for now with non-HD recordings,
Indeed. A FireWire capture of a non-HDTV cable channel takes about
19MB/minute. 600GB =
On Mon, 23 Jan 2006, Yeechang Lee wrote:
Precisely. I already had a 2.8TB RAID 5 array in a dual Xeon server,
and frankly neither wanted nor needed more computing capacity (or
accompanying administrative hassle). I also highly value a single
filespace (yes, yes, I know you can do much of the
On Sat, 14 Jan 2006, Robin Gilks wrote:
Silly question, but what is your source of mpeg4 stuff? I've not seen any
capture cards that output anything other that mpeg2.
I use 3 Plextor 402Us it offers hardware mpeg4 directly.
-nathan
___
mythtv-users
On Tue, 10 Jan 2006, Nathan Allen Stratton wrote:
Uh.. I am running latest SVN and having major audio sync issues with
MythVideo. I have about a hundred DVDs I want to import, and so far the
first dozen all have audio sync problems.
Would fmpeg solve this issue
Uh.. I am running latest SVN and having major audio sync issues with
MythVideo. I have about a hundred DVDs I want to import, and so far the
first dozen all have audio sync problems.
Nathan Stratton
nathan at robotics.net
http://www.robotics.net
___
I have power manamgment turned off and have the following in xorg.conf:
Section ServerFlags
Option NoPM 1
Option blank time 0
Option off time 0
Option standby time 0
Option suspend time 0
EndSection
In GNOME I have screensaver turned off, yet with all of
On Tue, 10 Jan 2006, Matt Hannan wrote:
Nathan Allen Stratton wrote:
I have power manamgment turned off and have the following in xorg.conf:
Section ServerFlags
Option NoPM 1
Option blank time 0
Option off time 0
Option standby time 0
Option
On Mon, 9 Jan 2006, James C. Dastrup wrote:
Is anyone aware of a PCI-X 64bit / 133MHz capable IDE RAID HBA?
Or, how about a PCI 64bit / 33 Mhz MHz capable IDE RAID HBA?
All the ones I'm seeing are 32-bit / 33mhz.
I am using 9500S-12 with 12 320 gig disks and it works like a charm in my
On Tue, 13 Dec 2005, Mike Frisch wrote:
On Mon, Dec 12, 2005 at 10:13:19PM -0500, Nathan Allen Stratton wrote:
Why not use mythstream to transcode it to 3GPP H.264/AAC at CIF
resolution? I would like to do this on my treo, but so far the only H.264
player I found does NOT support AAC. I
Allen Stratton wrote:
I have looked all through Edit Keys and I can't find a jump key for
Media
Library - Watch Recordings. Is there any way to make one? I want to
setup
lircrc with a key that jumps right to Watch Recordings page.
Nathan Stratton
nathan at robotics.net
http
On Mon, 12 Dec 2005, Mike Frisch wrote:
On 12-Dec-05, at 8:03 PM, Isaac Richards wrote:
On Monday 12 December 2005 13:50, Mike Frisch wrote:
Is anybody working on a port of the MythTV front end to a Nokia 770?
I'm considering it. Well, not a frontend port, but more of a smart
remote
On Sat, 10 Dec 2005, Nathan Allen Stratton wrote:
I am having some big issues compiling all of the mythplugins on SUSE 10
AMD64. I get -lXmu errors with music and gallery and -lkhtml for browser.
They both are on my box:
opie:/usr/local/src/mythplugins # find / -name libkhtml.so -print
On Sun, 11 Dec 2005, Paul A. Bennett wrote:
Hello!
Now that I've finally managed to get my Hauppauge PVR-150 MCE working,
I'm wondering if I'm the only guy on the planet who has yet to figure
out how to get MythTV 0.18.1 to compile on my system. Thus, I would
like to ask:
* Are
I have looked all through Edit Keys and I can't find a jump key for Media
Library - Watch Recordings. Is there any way to make one? I want to setup
lircrc with a key that jumps right to Watch Recordings page.
Nathan Stratton
nathan at robotics.net
http://www.robotics.net
On Sat, 10 Dec 2005, Joshua Lewis wrote:
Back story:
I am building a house in KY (insert Red Neck Joke Here!) and am designing
the house around homeentertainment.
quad CAT6 drops in every room
Dual AV jacks in every room
Built in speakers in lots of rooms
MythTV in the basement
dumb
I am having some big issues compiling all of the mythplugins on SUSE 10
AMD64. I get -lXmu errors with music and gallery and -lkhtml for browser.
They both are on my box:
opie:/usr/local/src/mythplugins # find / -name libkhtml.so -print
/opt/kde3/lib64/libkhtml.so
I am working on upgrading my myth box from a standard x86 to AMD64 box and
running into a few problmes.
System: AMD Athlon(tm_ 64 X2 Dual Core Processor 38000+ Suse 10.0
1) Get the QSqlDatabase: QMYSQL3 driver not loaded error when I try to
run mythtv-setup. I have installed qt-mysql off the
On Thu, 1 Dec 2005, Phill Edwards wrote:
I'd like to add external movies in different formats, MPEG-2, MPEG-4, etc.
to MythTV.
The same goes for mp3 and photos.
I couldn't find any documentation related to how can I do it.
For music you need to use the MythMusic application. For photos
On Tue, 29 Nov 2005, Mike Grusin wrote:
I am using two Plextor MPEG-4 hardware boxes connected to my cable TV
set top boxes. The first problem I have is that if I go into Recording
Profiles and select USB MPEG-4 Encoder and edit the bit rate and save the
recordings still look the same and
I am using two Plextor MPEG-4 hardware boxes connected to my cable TV
set top boxes. The first problem I have is that if I go into Recording
Profiles and select USB MPEG-4 Encoder and edit the bit rate and save the
recordings still look the same and take up same amount of space. It does
not
On Fri, 25 Nov 2005, Paul V. Gratz wrote:
I have a treo 650 and I've encoded a few shows for it. I have been
using mencoder to encode it to the built-in lavc endcoder for divx.
In my understanding divx is an early implementation of mpeg4 (prior to
the release of the standard). Xvid is
On Sat, 26 Nov 2005, Paul V. Gratz wrote:
Yeah this is the same player I'm using on my Treo. I haven't tried
mythstream though. I don't think that player has the ability to pick
up a stream via TCPIP. Even if it did, my only internet access on
that phone is through SprintPCS's vision plan
Any plans to support RTSP with MythBackend? It would be nice to use some
of the new MPEG4 boxes out there like the AmiNET124.
http://www.aminocom.com/products/ipstb/aminet124.html
Nathan Stratton
nathan at robotics.net
http://www.robotics.net
___
Anyone able to change the bitrate with the Plextor ConvertX in myth? I go
to the prefs for and started with Live TV, no matter what the bitrate was
100 - 6000 it always used the same. I also have tried changing Default and
file size still is about 1 gig an hour no matter what bitrate I select.
On Wed, 23 Nov 2005, Nick wrote:
If you're in the UK,
http://www.sky.com/skycom/skynavigator
Is very nice. Works well with lirc - Myth doesn't understand case (UPPER /
lower) from the remote, though).
I'm a big fan of my Navigator remote - I do miss the skip buttons that
the
On Wed, 23 Nov 2005, Joseph A. Caputo wrote:
The extension now reflects the container format of the recording.
Files recorded from a DVB source, or from a hardware MPEG encoding
card, will be named *.mpg. Files recorded using software encoding,
or transcoded recordings, will be named *.nuv.
On Tue, 22 Nov 2005, Bob wrote:
I think this obsession with 5.1 sound isn't entirely healthy, I for one,
only have two ears.
Uh your kidding right?
-nathan
___
mythtv-users mailing list
mythtv-users@mythtv.org
Anyone know of any small QWERTY remotes that can be used with myth? I have
seen lots of wireless keyboards, but I want something much smaller. You
don't need to type a lot, so something shaped lime my treo 650 would be
very coo.
Nathan Stratton
nathan at robotics.net
http://www.robotics.net
On Thu, 17 Nov 2005, Steve Adeff wrote:
the website never gets updated, the HD3000 DOES support QAM, I've been using
it this way for about 2 months now.
QAM is used by cable companies, so if you recieve your HDTV via a cable line
then you would use QAM(most likely QAM256).
You only get
I just installed a free air antenna with rotor and get a lot of channels
but I need to move the antenna at times. Would be cool if there was a hack
to control the antenna. It would need to setup and do a 360 scan to find
all the channels then it would be easy to turn right/left and find best
On Thu, 17 Nov 2005, Buechler, Mark R wrote:
There's already support in Myth for Diseqc motor control via diseqc 1.2
1.3. I've tried both and am having trouble with both but at this point I'm
wondering if it has something to do with my setup.
Note, in svn versions of Myth there seems to be
On Thu, 17 Nov 2005, Buechler, Mark R wrote:
There's already support in Myth for Diseqc motor control via diseqc 1.2
1.3. I've tried both and am having trouble with both but at this point I'm
wondering if it has something to do with my setup.
Note, in svn versions of Myth there seems to be
On Tue, 15 Nov 2005, Dustin Nicholas Jenkins wrote:
Hello all,
I've been using the Subversion build of MythTV for the past couple of
weeks now, and the 'Watch TV' (LiveTV) link hasn't worked at all (i.e.
the link text flashes and does nothing, no log entry or anything).
Does anyone
On Tue, 15 Nov 2005, Peter Darley wrote:
Nathan,
Since your card does the encryption for you, you could just make
sure that the backend doesn't have any scheduled shows, or shut down
the backend, then just do the 'cat video0 file.mpg' trick that
people use when testing their card
On Mon, 14 Nov 2005, Mercury Morris wrote:
I have a PVR350, too. In mythtv-setup, I found Composite 0 corresponded to
the composite inputs on the card.
The following may be incomplete, it's from my notes of October 2004 -
thirteen months ago.
In mythtv-setup, I defined a Video Source
Is there a list anywhere of unofficial myth plugins? I have found:
MythStream lets you play internet audio streams
MythStreamTVtranscode and play video from mythweb
MythLCD libs to write to LCD (anyone doing anything with this?)
Nathan Stratton
nathan at robotics.net
Ok, so I have looked at the archives and searched google, I found some
ideas, but they are all for much older version of myth and don't seem to
work for 18.1 or cvs.
I am using SUSE 10.0 with CVS (also tried 18.1) and get the following
error:
/usr/lib/qt3/include/private/qucomextra_p.h:65:
I think the advantages of the Silverstone cases is they have so
many options when it comes to size, expansion, and looks. For
example, Silverstone offers the only HT-style case I found that
supports 3 full-height expansion slots (1xAGP, 2xPCI) in a low-profile
design, such as the LC-11M,
On Sat, 12 Nov 2005, Michael T. Dean wrote:
If you really want 5.1 channel, though, you'll have to go to a digital
video broadcast technology (like HDTV (US) or DVB).
My current myth box uses 2 convertx boxes, but I just bought a HD-3000
card and monday should have my antenna. Do I need to do
I currently have a 3ware card with 8 160 gig drives in it giving me just
over 1 TB. I am thinking about getting a new 12 port serial ATA card with
400 gig drives (cost different between 400 and 500 is crazy). Has anyone
worked with this much storage with myth? I dont want to spend the money on
On Sat, 12 Nov 2005, Michael T. Dean wrote:
On 11/12/05 17:15, Nathan Allen Stratton wrote:
My current myth box uses 2 convertx boxes, but I just bought a HD-3000
card and monday should have my antenna. Do I need to do anything special
to get 5.1 channel sound?
Nope. ATSC (US high
On Sat, 12 Nov 2005, Michael T. Dean wrote:
Nope. ATSC (US high-definition TV) is broadcast already encoded using
the MPEG-2 system. The audio is encoded in an AC-3 stream within the
transport stream. So, it's just there.
Hmm so since I setup the mp3 audio encoding on the video profiles I
On Thu, 10 Nov 2005, EC wrote:
Hi,
I don't have a good answer for you, but, as a Plextor ConvertX user
myself (I use 2 PX-TV402U boxes, MythTV 0.18-1 too), I thought I'd note
that it CAN work very well - though at times it seems a bit touchy.
I agree, I have 2 ConvertXs as well and they
I just setup my first mythtv box 0.18.1 with 2 plextor M402Us, video
quality is great, but audio quality even with highest MP3 quality sucks.
Any ideas?
Nathan Stratton
nathan at robotics.net
http://www.robotics.net
___
mythtv-users mailing list
51 matches
Mail list logo