strange, as i retry this evening, `nagios -v ...` now gives me error lines.
i believe i only change some permissions.
does nagios give some warning if it can't access some files ? or if
permission directory is incorrect ?
Maybe a warning could help
thanks for the help
Regards
-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/11/08 10:51 PM, Sean O`Brien wrote:
> Dear All,
>
> I have been studying GroundWork monitor, with reference of course to Nagios.
>
> I hope someone can answer my query.
>
> Re: Nagios 2.x
>
> It is my understanding that when all the service
Dear All,
I have been studying GroundWork monitor, with reference of course to Nagios.
I hope someone can answer my query.
Re: Nagios 2.x
It is my understanding that when all the service checks fail, Nagios performs
host checks; the number of which we have specified to 3. At which point (afte
Hi, i found something strange in nagios-3.0.5, the
first_notification_delay just works fine if the max_check_attempts is
set to 1. If the max_check_attempts is set to more than 1 the
notification is sent immediately after the last check attempt.
Thank You
Rodolfo - Curitiba - Paraná - Brasil
CELE
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Julien TOUCHE wrote:
> Hello
>
> i'm trying to migrate my nagios install on 3.0. i use openbsd (4.4) with
> nagios port.
Did you read the update part about the changes between 2.x and 3x
configuration files?
Having done 2 upgrades on 2 differnet sys
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Devin Atencio wrote:
> I am using the latest version of Nagios. I am doing most of my checks
> using NRPE and I noticed that when it e-mails or pages me about an
> alert some of the information from the error appears to be getting cut
> off, is t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Layne Meier wrote:
> Herein lies my problem. I've inherited supporting our Nagios system.
> It was pre-configured and set-up by a previous employee. I've gone
> over the web-based manual, but can't find specifics like this defined
> in the ma
Aaron,
That looks great, Thanks!
-Mike
-Original Message-
From: Aaron Segura [mailto:[EMAIL PROTECTED]
Sent: Monday, November 10, 2008 3:30 PM
To: Michael Gargiullo; nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] Check by ssh timeout problems
We had a similar problem (n
We had a similar problem (not using SSH, though). We use this script to
handle our notifications:
http://sweetdeliah.com/nagios/notify/nagios_notify-0.5.tar.gz
Using the templates, we do something like (or, exactly like) this...
#IF NOTIFICATIONNUMBER=1
#IF SERVICEOUTPUT~=/Service Check Timed O
We configure check logfiles as a volatile service and choose not to
use the sticky option. Some logs we configure check-logfiles to send
a message via nsca for each pattern match, ensuring we don't miss any
notifications. We also configure check-logfiles services not to send
out recovery messages
I have 2 remote machines that only I only have ssh access to. I have
about 5 services I check the status of. Occasionally the machine takes >
70seconds to respond.
I have the global timeout set to 120 sec, but I still get 5
notifications "CRITICAL - Plugin timed out while executing system call"
-Original Message-
From: Devin Atencio [mailto:[EMAIL PROTECTED]
Sent: Monday, November 10, 2008 12:20 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Increase output from nagios alert e-mails/pages?
I am using the latest version of Nagios. I am doing most of my check
Hi Julien,
Julien TOUCHE wrote:
> Hello
>
> i'm trying to migrate my nagios install on 3.0. i use openbsd (4.4) with
> nagios port.
>
> after updating my configuration with (1), i get
>
>
> # nagios -v `pwd`/nagios.cfg
>
> Nagios 3.0.3
> Copyright (c) 1999-2008 Ethan Galstad (http://www.nagios.
We're deploying Nagios (currently using 3.0.2) for our Unix servers, and I have
a question about acknowledgement.
We're using the check_logfiles plugin to monitor syslogs (e.g.
/var/adm/messages on Solaris). check_logfiles returns CRITICAL when it detects
a problem, but then normally clears its
Hello
i'm trying to migrate my nagios install on 3.0. i use openbsd (4.4) with
nagios port.
after updating my configuration with (1), i get
>>>
# nagios -v `pwd`/nagios.cfg
Nagios 3.0.3
Copyright (c) 1999-2008 Ethan Galstad (http://www.nagios.org)
Last Modified: 06-25-2008
License: GPL
Readin
I am using the latest version of Nagios. I am doing most of my checks
using NRPE and I noticed that when it e-mails or pages me about an
alert some of the information from the error appears to be getting cut
off, is there a way to make it so that it e-mails me the entire
message and not to
Ever since I upgraded to 3.0.5 I noticed that if I select a host and
choose 'disable checks on all services on this host' then select for
host also, it doesn't do anything. If I disable the host check and
service checks individually it works, but never all at once.
I did notice, however, that if
Here's a thought: could it be that your original contact list don't get
notified because you are in an escalation period? Thus the original list
is out of reach.
One thing you could try is creating a new list (lfisher_ooh) and then
set this group to get the alerts during escalation periods but onl
fair enough. should have read the entire thread before jumping in..
From: Leah Fisher [mailto:[EMAIL PROTECTED]
Sent: 10 November 2008 16:00
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Notification Recovery Issue
As I've said, I notice in
Hi,
Using NSCA client I am sending the data to Nagios In following format.
Its working fine and showing me the plugin out put on Nagios web
interface for that service.
[]
PROCESS_HOST_CHECK_RESULT;;;
Qn is how to create the graph of that plugin_output data result using
MRTG or performan
As I've said, I notice in the logs that there is a recovery notification
going to my none contact group, then before that I see the notification sent
to the none contact group, and then 2 hours before that I see the
notification going to everyone that it is supposed to. This has been
happening for
Herein lies my problem. I've inherited supporting our Nagios system.
It was pre-configured and set-up by a previous employee. I've gone
over the web-based manual, but can't find specifics like this defined
in the manual.
I was tasked with updating all of the groups and contacts, but need
>From these definitions - it should work and i see not reason why it doesn't .
have you checked the log to see what happens when it detects a recovery ?
could it be that you have tow instances running and thus the nagios isn't
running with the corrent
config ?
On Monday 10 November 2008 15:
That's what I'm trying to find out. Can I put an individual contact
within the contact_groups list?
ie;
contact_groups router-admins,lmeier
Thank you,
Layne Meier
AJC Information Technology
Atlanta Journal-Constitution
A Cox Newspaper
On Nov 10, 2008, at 10:06 AM, Assaf Fl
Here are a bunch of my definitions. A host, the inherited host definitions,
a contact and the escalation I'm using.
define host{
use win
host_name windowshost
address xxx.xxx.xxx.xxx
contact_groups +win
}
define host{
use generic-host
name win
hostgroups windows
contact_g
I may be mistaken , but i don't think you can /need to define both contact
groups and individual
contacts in the host declaration.
Besides that - the definitions look fine .
On Monday 10 November 2008 14:38:54 Layne Meier wrote:
> Would it be okay then to have a host entry in the hosts.cfg f
can you show us the escalation config ?
It will be easier to understand and debud , also a host declaration will help
On Monday 10 November 2008 14:33:45 Leah Fisher wrote:
> Sorry, I should have included that. I'm using version 3.0.5 on RHEL4 ES.
>
> I get recoveries if the host escalations
Would it be okay then to have a host entry in the hosts.cfg file like
this based upon the response I received from Dennis Hünsler:
define host{
host_name bogus-router
alias Bogus Router #1
address 19
Hi List,
I have the following situation. I try to connect to the NDO and want to
get informations about Downtimes that will be set, or was set. The
nagios_downtimehistory is shown each downtime. Also them who set in the
future.
If I try do remove a Downtime, that is set in the Future in the Nagios
Sorry, I should have included that. I'm using version 3.0.5 on RHEL4 ES.
I get recoveries if the host escalations do not take effect and I can see in
the event log that the notification was just sent to my escalation group
once the escalation group gets a notification.
Leah
On Mon, Nov 10, 2008
Which version are you using ?
Do you also have them in the contact groups with the recovery option defined in
the host/service
definition
Myself i am using the same issue and we get the alert for both the faiure and
recovery ,however i
use 2.12 .
On Monday 10 November 2008 14:09:30 Leah
I have been noticing an issue with notifications that I wanted to run by
everyone before I report it as a bug. I'm also hoping someone who is on the
development list can let me know if this has already been reported. I use
escalations to suppress notifications on weekends so when no one is around
Taylor Dondich wrote:
> Hi all, might have seen a bit of an irate email from me regarding
> OpMon and it's use of Fruity as it's initial codebase. After
> discussing it with the OpMon team, they had good reason to fork the
> project. They didn't really ping the user community mailing list or
> my
33 matches
Mail list logo
