Hello,
I have installed nrpe v2.11 on a monitored host running Solaris 10. An
excerpt from nrpe.cfg on the monitored host is as follows;
*command[check_disk]=/usr/local/nagios/libexec/check_disk -w 30% -c 15% -p /
command[check_disk]=/usr/local/nagios/libexec/check_disk -w 30% -c 20% -p
On Tue, Jul 14, 2009 at 5:42 AM, jvc_dvl...@hotmail.com wrote:
Hi Patrick,
I do get a result/output when I run the batch as described (0 or 1).
But I read that it needs to output in STDOUT format and I don't know how to
write that in vbs...
All tips are welcome.
On Jul 14, 2009, at 3:58 AM, Juki wrote:
Hello,
I have installed nrpe v2.11 on a monitored host running Solaris 10.
An excerpt from nrpe.cfg on the monitored host is as follows;
command[check_disk]=/usr/local/nagios/libexec/check_disk -w 30% -c
15% -p /
Patrick, you legend, it worked! Thanks a bunch...
On Fri, Jul 10, 2009 at 12:44 AM, Morris, Patrick patrick.mor...@hp.comwrote:
Hi Guy!
On Tue, 07 Jul 2009, Guy Waugh wrote:
Hi all,
I'm trying to configure nagios 3.0.6 so that I can add contact groups to
a host by adding a host
HI,
I run a distributed Nagios environment consisting of 1 parent server and 2
child servers.
The child servers perform all the service checking while the parent server
should be performing active service checks.
The host definitions are configured to perform host checks every 5 minutes.
The
Juki wrote:
Hello,
I have installed nrpe v2.11 on a monitored host running Solaris 10. An
excerpt from nrpe.cfg on the monitored host is as follows;
*command[check_disk]=/usr/local/nagios/libexec/check_disk -w 30% -c 15% -p /
command[check_disk]=/usr/local/nagios/libexec/check_disk -w
On Jul 14, 2009, at 9:46 AM, Paul Corcoran wrote:
HI,
I run a distributed Nagios environment consisting of 1 parent server
and 2 child servers.
The child servers perform all the service checking while the parent
server should be performing active service checks.
Both the child server
does anyone have any documentation about the USE parameter listed below - I
have been unable to locate this option in the nagios documentation
define service{
name sensor-service
use generic-service
check_period 24x7
max_check_attempts 4
normal_check_interval 5
retry_check_interval 1
Hi Natalie,
'use template-name' just means that the definition should use the values
defined in template-name.
I think this is the relevant page in the documentation:
http://nagios.sourceforge.net/docs/3_0/objectinheritance.html
Cheers,
Guy.
On Tue, Jul 14, 2009 at 4:48 PM, Natalie Aloi
Natalie Aloi wrote:
does anyone have any documentation about the USE parameter listed
below - I have been unable to locate this option in the
nagios documentation
It inherits settings from a class that you define beforehand (ie register 0)
http://nagios.sourceforge.net/docs/3_0/objectinheritance.html
On Tue, Jul 14, 2009 at 11:48 AM, Natalie
Aloina...@experisdatacenters.com wrote:
does anyone have any documentation about the USE parameter listed below - I
have been unable to locate this option in the nagios documentation
define
have you looked here ?
http://nagios.sourceforge.net/docs/3_0/objectinheritance.html
Assaf
On Tuesday 14 July 2009 15:48:02 Natalie Aloi wrote:
does anyone have any documentation about the USE parameter listed below - I
have been unable to locate this option in the nagios documentation
Natalie Aloi wrote:
does anyone have any documentation about the USE parameter listed below - I
have been unable to locate this option in the nagios documentation
define service{
name sensor-service
use generic-service
check_period 24x7
max_check_attempts 4
normal_check_interval 5
Firstly many thanks to all that helped me, I finally got distributed servers
up and running.
It seems that there is a lot of discussion about distributed clusters.
Is there a current discussion forum linked to development for this, and how
do I join it
I would like to return some input and help
thanks for all your responses, this is working now...
-Original Message-
From: Natalie Aloi [mailto:na...@experisdatacenters.com]
Sent: Tuesday, July 14, 2009 11:48 AM
To: 'Nagios Users Mail-list'
Subject: service definitions use
does anyone have any documentation about the USE
Im not sure where I am missing ...but HOST CHECKS are not being performed but
service checks are...any idea of what configuration file I need to look in? I
have a total of 18 hosts, when I view hosts detail page in gui I only see
pending (except for local host)...below are stats capture my
Hi Natalie,
You might need a 'check_command' for each of your hosts... like this:
check_command check-host-alive
The 'check-host-alive' check command would have to be defined, probably in
your commands.cfg file. The default nagios configuration defines this
command (I think).
This is where
Hello all,
Ive a problem and I dont now if I can resolve.
The problem is that I like to install a client on nagios
monitored hosts that will execute passives check and submit to nagios the
results. I also like to when the host communication whit nagios is down it
keps a
Nagios uses check_ping for the host check of most hosts.
The check is configured to send only one ping.
So if Nagios receives a response, it is 0% packet loss.
If no response, it is 100% packet loss.
# 'check-host-alive' command definition
define command{
shadih rahman wrote:
Nagios uses check_ping for the host check of most hosts.
The check is configured to send only one ping.
So if Nagios receives a response, it is 0% packet loss.
If no response, it is 100% packet loss.
How is it possible for
YUP - that's just what I needed - thanks, Guy!
-Original Message-
From: Guy Waugh [mailto:guid...@gmail.com]
Sent: Tuesday, July 14, 2009 01:45 PM
To: 'Natalie Aloi'
Cc: 'Nagios Users Mail-list'
Subject: Re: [Nagios-users] Host Checks Service Checks
Hi Natalie,
You might need a
shadih rahman wrote:
David,
Thanks for your reply. I am ensuring one icmp packet by using -p option
in my command definition. Please advise on this. Thanks
On Tue, Jul 14, 2009 at 2:40 PM, David Rosenstrauch dar...@darose.netwrote:
The plugin issues 5 pings by default:
On Tue, 14 Jul 2009, Juki wrote:
Hello,
I have installed nrpe v2.11 on a monitored host running Solaris 10. An
excerpt from nrpe.cfg on the monitored host is as follows;
command[check_disk]=/usr/local/nagios/libexec/check_disk -w 30% -c 15% -p /
On Jul 14, 2009, at 11:16 AM, Nick Price wrote:
Firstly many thanks to all that helped me, I finally got distributed
servers
up and running.
It seems that there is a lot of discussion about distributed clusters.
Not especially, that I've seen.
Is there a current discussion forum linked
Hi Dale!
On Tue, 14 Jul 2009, Dale J. Chatham wrote:
I don't seem to be able to do this:
# vim:ts=4:ai:expandtabs
#
#
define hostgroup {
hostgroup_nameall-hst
alias all-hst
members
On Tue, 14 Jul 2009, jvc_dvl...@hotmail.com wrote:
Hi Patrick,
I do get a result/output when I run the batch as described (0 or 1).
But I read that it needs to output in STDOUT format and I don't know how to
write that in vbs...
All tips are welcome.
A result code and output are not
On Tue, 14 Jul 2009, Mark Gius wrote:
Morris, Patrick wrote:
Hi Dale!
On Tue, 14 Jul 2009, Dale J. Chatham wrote:
I don't seem to be able to do this:
# vim:ts=4:ai:expandtabs
#
#
define hostgroup {
hostgroup_nameall-hst
alias
On Jul 14, 2009, at 2:26 PM, Morris, Patrick wrote:
Hi Dale!
On Tue, 14 Jul 2009, Dale J. Chatham wrote:
I don't seem to be able to do this:
# vim:ts=4:ai:expandtabs
#
#
define hostgroup {
hostgroup_nameall-hst
alias
I seem to be having a problem with my GUI in Nagios, when I set everything up I
disabled notifications through the GUI so that I could verify all of my
services were working properly. Now that everything is working (sort of) when i
attempt to enable notifications they just won't enable, they
On Tue, Jul 14, 2009 at 3:55 PM, Morris, Patrickpatrick.mor...@hp.com wrote:
According to
http://nagios.sourceforge.net/docs/3_0/objectdefinitions.html#hostgroup, you
can have sub hostgroups. So in theory he should be able to specify a
hostgroup that contains every host, subtracting
Marc Powell wrote:
On Jul 14, 2009, at 2:26 PM, Morris, Patrick wrote:
Hi Dale!
On Tue, 14 Jul 2009, Dale J. Chatham wrote:
I don't seem to be able to do this:
# vim:ts=4:ai:expandtabs
#
#
define hostgroup {
hostgroup_nameall-hst
alias
It seems that for some reason my new install of nagios 3.0.6 into Debian
lenny has failed to install check_snmp into the
/usr/local/nagios/etc/libexec folder.
It has a multitude of other check_snmp_blah blah, which I am sure are
all based on it, but IT is not there, and several of my plugins call
hi,
http://nagiosplugins.org/man/check_snmp
quote
This plugin uses the 'snmpget' command included with the NET-SNMP package.
if you don't have the package installed, you will need to download it from
http://net-snmp.sourceforge.net before you can use this plugin.
/quote
The Net-SNMP package
On Jul 14, 2009, at 3:45 PM, Mark Gius wrote:
This syntax works for me in service escalations (service and host
groups), as well as service definitions. I've not tried it in
hostgroups however. The behavior is sort of defined here
I am unable to login to the Nagios web GUI. When I open a browser to access
Nagios, I am unable to authenticate. I haven't made any changes or addons
since yesterday.
What do I need to do to reset the password and login? Am I able to do this
somehow in the terminal?
Cheers,
Kevin
On Tue, Jul 14, 2009 at 5:33 PM, Marc Powellm...@ena.com wrote:
Regular expressions can be used in any of the fields used in the
examples below (host names, hostgroup names, service names, and
servicegroup names).
note that 'hostgroup_members names' is not specifically mentioned.
Diving
Hi Kevin!
On Tue, 14 Jul 2009, Kevin Mitnikc wrote:
I am unable to login to the Nagios web GUI. When I open a browser to access
Nagios, I am unable to authenticate. I haven't made any changes or addons
since yesterday.
What do I need to do to reset the password and login? Am I able to
That is understandable. What exactly am I looking for in my webservers
configuration? What information can I provide. I have a typical Nagios
install with a few servers being monitored.
Is there a way to reset the password for the Nagios web portal or access?
Not sure how to refer to the web
Scratching my head as to how it might be possible to accomplish a
monitoring task I need to do:
We have a database table of tags. For each tag we have a process that
generates a Javascript file and pushes it out to a CDN. I've
successfully created a service check to monitor that the process
Default web access is controlled via apache's basic auth module, using a
password file. The default name for this file is htpasswd. I would
look in your apache and nagios directories for a file of that name for a
start.
If you can't find that, look in your apache configs and find the nagios
Hmm, I'm sure you're really not Kevin Mitnick
You'll probably find a .htaccess file somewhere on your system. The
exact configuration will vary depending on how you initially installed
nagios. This file will contain a username, a .htpasswd file will contain
the (encrypted) password.
I do a similar thing where I dynamically change the service check
definitions configured into Nagios. You've almost got to this solution
but say and couldn't just . Not sure why you say that but I'll briefly
cover what I did. You will need some programming/scripting.
First up in the
You're almost there. You just need to configure NSClient++ a little more.
http://nsclient.org/nscp/wiki/CheckEventLog
If you jump on our demo site I think there is an example of a check
command to look through the event log
Go to http://www.smartmon.com.au/, select the demo menu and then
I can't answer your question directly but I know what you are trying to
achieve (with regards to the large public display).
Instead of showing the status map we developed an application that reads
the nagios status.dat file and builds a high level status view of the
monitored environment.
In
You received an answer earlier today that you seem to have ignored...
I'll try --
On Jul 14, 2009, at 3:45 PM, SYS ADMIN wrote:
It seems that for some reason my new install of nagios 3.0.6 into
Debian
lenny has failed to install check_snmp into the
/usr/local/nagios/etc/libexec folder.
45 matches
Mail list logo