Hey,
have you ever heard of IPMI? It was developed by Intel, Dell, HP and NEC for
hardware monitoring.
Here is a good Introduction from the Open Source Monitoring Conference last
month: http://www.netways.de/index.php?id=3035&L=1
I haven’t used it yet, but I will give it a try.
Ma
?
Marcel
-Original Message-
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: Wednesday, December 14, 2011 11:46 AM
To: 'Andreas Ericsson'; 'Nagios Users List'
Subject: [Nagios-users] R: timing of passive check results
>
>I have 2 remote servers, both with
Hey Chris,
have you taken a look into the Docu and verified that the used macros are
available in your context? Have you tried the debug option?
Marcel
>From: Chris Zimmerman [mailto:czim...@wczimmerman.dyndns.org]
>Sent: Wednesday, July 27, 2011 12:27 AM
>To: nag
with various values
On Jul 20, 2011 2:04 PM, "Marcel Galke - Trans4mation IT GmbH"
mailto:marcel.ga...@trans4mation.de>> wrote:
> I've never seen a CISCO ACE yet. If you're sure file permissions and config
> files are set up correct, try out different values for the
uestion is more along the line this
>
>hostname = Primary loadbalancer ip? or ip of client
>peer = ip of 2ndary balancer?
>
>$USER1$/cisco_ace_failover -H 192.168.2.224 -P 192.168.2.225 -C $ARG1$ -t 30
>
>Where arg1 = variable i created for the clients various snmp communitie
. Juli 2011 10:33
An: nagios-users@lists.sourceforge.net
Betreff: Re: [Nagios-users] few questions that I cant find any info on
Marcel I am defining the command with the -H switch using the primary
load balancer ip and the -P with the 2ndary one. The man page on the
nagios exchange is extremely
your service definition.
3) What tells you the "--help" switch of the plugin? Usually "-w" (warning) and
"-c" (critical) switches are used.
Marcel
--
Magic Quadrant for Content-Aware Data
Are you sure you are trying to test plugin execution with the nagios user?
Try that.
On Tue, Aug 17, 2010 at 5:57 PM, wrote:
> Hi Melissa,
> if you disable the embedded perl interpreter in nagios.cfg, does the
> script start to work?
> Diego
> Sent from my BlackBerry® wireless device
>
> -O
Well,
Android powered devices with rooted Operational Systems have the ability to
connect through VPN and then that's all good.
With certificates and paranoid security stuff!
regards,
On Wed, Jul 14, 2010 at 3:37 PM, Giorgio Zarrelli wrote:
> Eheheheh,
>
> Thanks for your advice, anyway I nev
I use the statuswml.cgi and it works like a charm.
Ah, and I use it as part of the NAGROID, that I looove!!!
On Wed, Jul 14, 2010 at 12:31 PM, Giorgio Zarrelli wrote:
> Hi,
>
> Anyone using an easy interface for Nagios on iPhone?
>
> I do not mean some native iPhone app, I mean something server
Perhaps if you're upgrading and haven't touched the resources.cfg, then you
could be having issues with $USER1$ defined for your previous installation.
On Wed, May 19, 2010 at 3:09 PM, Michael Maxwell wrote:
>
> > P.S. My apologies if I seem snippy. It's a bad day. If you provide
> > the info,
rsion 3.2.1
and would love to have a look at Max's patch!
Notification is not my bottleneck, and this is not for my own nagios
install, it's for someone else, so I cannot post nagios.cfg here. Sorry.
But again, thanks for all the answers!!!
On Tue, May 18, 2010 at 5:49 PM, Mike Linds
Hi list,
Several times I'm asked about Nagios latency when the number of services go
over a certain number.
Is there any tweak to have nagios scale checkings more than it would after
tweaking every configuration option for boosting performance?
It seems that nagios don't do the best job at takin
Make sure you understand the underlying design of distributed nagios setup.
Obssessive-Compulsive (ocsp) command need to be correctly configurated on
nagios slave.
2010/5/14 Sérgio Afonso
> Hello Marcel,
>
> My nagios version is 3.2.0. About my command_check_interval I
> couldn&
With only 150 services, it should not delay that much nor stops execution of
the main process.
Please check you main nagios.cfg file and look for *command_check_interval*,
if the value attributed to that variable isn't *"-1"* then there is your
problem.
Also, which nagios version are you running?
Yeah, read about Distributed/Redundant setup and the OCSP/OCHP command
definitions. There you'll find your answer!
Happy monitoring!
On Tue, May 11, 2010 at 3:01 PM, Leonardo Carneiro - Veltrac <
lscarne...@veltrac.com.br> wrote:
> Hi everyone,
>
> I have two datacenters. One of then is already
On Mon, May 10, 2010 at 7:29 PM, Ari Echt wrote:
> Nagios newbie here looking to setup monitoring for 4 servers. Any
> helpful guides out there that anyone recommends would be greatly
> appreciated.
>
http://nagios.sourceforge.net/docs/3_0/ -- Assuming you're using the 3.X
branch.
have fun!
---
cfengine, mon, rmon, cron, watchdogs in general, daemontools, and many many
many many others...
On Mon, May 3, 2010 at 2:06 PM, Max wrote:
> As can puppet, Chef, Monit, Net-SNMP, and many others :) .. always a
> balance with deciding where process restarts should happen - the
> larger the networ
Look if you have more than one nagios process running.
/etc/init.d/nagios stop; ps -fu nagios
If after nagios stop you still have nagios processes, then killall nagios.
then fresh start and see if scheduling is ok.
if not the you have clock/timezone problems, or something alien..
On Fri, Apr
(assuming nagios 3.x series) please read this:
http://nagios.sourceforge.net/docs/3_0/toc.html
On Thu, Apr 22, 2010 at 5:14 PM, Albert Shih wrote:
> Hi all.
>
> I would like to known what nagios with the child host when a parent is
> unreachable.
>
> Does he continu to check something ? For exam
glad to be of any help
On Thu, Apr 22, 2010 at 4:39 PM, Robert Wolfe wrote:
> Thanks! Was missing all of these. Ran this command and everything is
> set now! Thanks again!
>
>
>
> *From:* Marcel [mailto:mits...@gmail.com]
> *Sent:* Thursday, April 22, 2010 2:15 PM
>
make sure you have:
yum install net-snmp net-snmp-devel net-snmp-libs perl-SNMP
On Thu, Apr 22, 2010 at 2:30 PM, Robert Wolfe wrote:
> Hi all! I am trying to get the check_snmp code to compile, but for some
> reason it does not want to compile when I go to build the modules from the
> Nagios
from the docs, $SERVICEOUTPUT$ just prints the first output line. If by any
chance your plugin is outputting "\n$SERVICEOUTPUT$\n" the all you'll get
would be a blank line.
However, you can try using $LONGSERVICEOUTPUT$, as it prints everything from
plugins' output.
On Tue, Apr 20, 2010 at 2:43 P
On Mon, Apr 12, 2010 at 11:38 PM, wwanghongrui wrote:
> >- You haven't reloaded or restarted nagios since adding them
>
> I exectue "/etc/init.d/nagios reload" every time after edit something.
>
>
> >
> The file you're adding them to isn't parsed by nagios (i.e. a cfg_file or in
> a cfg_dir in
/usr/local/nagios/libexec/check_http --help
On Fri, Apr 9, 2010 at 4:32 PM, akp geek wrote:
> Hi all -
>
> Would it be possible to monitor a website, whether the web site is up or
> not using nagios. I have nagios sset up to monitor the databases
>
> Appreciate your help
>
> Regards
>
>
> -
If you don't want to read the manual, trying to do it yourself first, the
come here with your doubts and problems faced, then you could pay anyone to
do this for you...
On Thu, Apr 8, 2010 at 5:02 PM, Bertino, Paul <
paul_bert...@cable.comcast.com> wrote:
> I had hoped someone could give me som
at least it's not a question about notifications *not* being sent.
what do you mean about nagios sending alerts very often? Isn't that why you
setup it for?
On Fri, Mar 19, 2010 at 12:09 PM, Rutul Patel wrote:
> Hi,
>
> I need to configure nagios such a way that it sends alert when host is down
on, try to determine if server is
thrashing, and so on), or, sends back to snmpget the result.
Cheers,
Marcel
On Tue, Mar 16, 2010 at 3:56 AM, Giorgio Zarrelli wrote:
> Hi,
>
> If you just want to check if a host is alive, icmp is the protocol
> that's always been used for this pur
Well,
This could be completely out of line, but what if custom macros and a custom
host check was baked for this kind of situation?
He could associate a custom macro and a custom host check that uses that
custom macro to try to achieve what he wants.
Any ideas?
On Mon, Mar 15, 2010 at 8:49 PM,
ks!
>
>
> On Fri, Mar 12, 2010 at 6:12 PM, Marcel wrote:
>
>> have you restarted httpd?
>>
>> On Thu, Mar 11, 2010 at 6:10 PM, Tim Tompson wrote:
>>
>>> Any other ideas?
>>>
>>>
>>> On Thu, Mar 11, 2010 at 12:44 PM, Tim Tompson
have you restarted httpd?
On Thu, Mar 11, 2010 at 6:10 PM, Tim Tompson wrote:
> Any other ideas?
>
>
> On Thu, Mar 11, 2010 at 12:44 PM, Tim Tompson wrote:
>
>> Apache is working: "Apache is functioning normally"
>>
>> Yes, I have a few other sites on this box, all functioning properly.
>>
>> Wh
in the source code?
On Thu, Mar 11, 2010 at 6:32 PM, Jelle Smet wrote:
> Hi list,
>
> Anyone knows how to connect to nsca from python?
> I've understood it's not that difficult to do so, but if there's a module
> made for it, It saves the trouble.
>
> If not, where can I find the nsca specificat
Ops, my USER10 macro is to place a link for the service in question.
On Thu, Mar 11, 2010 at 5:06 PM, Marcel wrote:
> there is the notify-service-bby-email command, you should try:
>
> # 'notify-service-by-email' command definition
> define command{
> command_
there is the notify-service-bby-email command, you should try:
# 'notify-service-by-email' command definition
define command{
command_namenotify-service-by-email
command_line/usr/bin/printf "%b" "* Nagios
*\n\nNotification
Type: $NOTIFICATIONTYPE$\n\nService: $SERV
over.
TIA,
Marcel
--
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fas
yeah, just set your normal_check_interval to 6 (minutes if you don't change
the interval_length), and max_check_attempts to 10, then, after 60 minutes
you would be notified. Or the oposite, maybe setting the check interval to
10 and the number of checks to notify to 6. That way you'll always know t
# /opt/nagios/libexec/check_http --version
check_http v2053 (nagios-plugins 1.4.13)
#
On Mon, Dec 14, 2009 at 12:20 AM, dOE wrote:
> I have inherited a Nagios 3.0.3 server, and have been trying to get
> acquainted with it. How could I tell which plugin version I have, and is it
> worth upgradin
Once upon a time, I've tweaked syslog-ng to write to the command pipe. That
worked like a charm.
On Fri, Dec 11, 2009 at 10:05 AM, wrote:
> Greetings,
>
> does anybody know of a NSCA replacement, which does the job without the
> need
> of unsupported libraries? The requirement of libmcrypt makes
Maybe this would help:
http://onlamp.com/onlamp/2006/05/25/self-healing-networks.html
On Thu, Dec 10, 2009 at 3:08 PM, Christopher McAtackney
wrote:
> Hi all,
>
> I have a need to control an Active / Passive pair of components and
> was wondering if anyone had tackled this problem with Nagios?
>
In my last job, I was dealing with a nagios install a little bit over than
yours,
On Wed, Dec 9, 2009 at 9:06 PM, Jonathan Call wrote:
> I recently added two new slaves to a distributed Nagios system. The
> central server now passively processes 17,000+ service checks on 3000+
> servers.
>
> It'
Tivoli floods your mailbox, and all of them are false positives, then you
have a Tivoli setup problem, or a network related issue.
Nagios maybe at the same point of view of Tivoli, if you're having network
issues.
HTH,
Marcel
---
either you don't have printf of mail.
On Tue, Dec 8, 2009 at 5:41 PM, ReynierPM wrote:
> Hi every:
> I have problems now with email notification unless I didn't receive one.
> I check Nagios Event Logs and see this:
>
> [12-08-2009 14:53:28] Warning: Attempting to execute the command
> "/usr/b
*or*
On Tue, Dec 8, 2009 at 6:26 PM, Marcel wrote:
> either you don't have printf of mail.
>
> On Tue, Dec 8, 2009 at 5:41 PM, ReynierPM wrote:
>
>> Hi every:
>> I have problems now with email notification unless I didn't receive one.
>> I check Nagi
check openssl versions and compatibility.
On Tue, Dec 8, 2009 at 2:13 PM, Cedric Jeanneret <
cedric.jeanne...@camptocamp.com> wrote:
> Hello again,
>
> In fact, configuration files are dployed via puppet(
> http://reductivelabs.com/trac/puppet/wiki), so all files (should be) are
> the same. I'll
define hostgroup{
hostgroup_name some_name
members some_host,another_one,!router
}
define service{
use some-generic-template
hostgroup_name some_name
check_command check_something
(...)
}
define host{
use some-generic-template
host_name some_name
hostgroup some_name
}
http://nagios.sourceforge.net/docs/3_0/macros.html
>From this document you should be able to tweak your notification commands to
send customized email notifications.
Cheers,
On Tue, Dec 1, 2009 at 7:17 PM, akp geek wrote:
> Dear All -
>
>I have installed nagios and it has been work
sorry for replying my own post.
This particular application has it's query string separator as "|", then the
mangled perfdata.
Is it possible to perfdata to parses only the last segment separated by "|"
?
Thanks,
On Tue, Dec 1, 2009 at 5:13 PM, Marcel wrote:
> I&
I've had a need of getting the full output from plugins to appear at the
extended status information page:
http://path.to.nagios/nagios/cgi-bin/extinfo.cgi?type=2&host=host_name&service=service_description
Then I've realized that performance data is being mangled by this verbose
command_line.
Is
Please do not answer if asked why on earth would you use something like
that!!!
On Mon, Nov 30, 2009 at 7:59 PM, Lane Williams
wrote:
> If you have implemented ndo2db, you could write a SQL query tool
> ...PERL... which would find problems for host and services and then dump
> the proper variable
Well,
You should tell us some setups:
On Fri, Nov 27, 2009 at 5:38 AM, keshav murthy wrote:
> Hello all,
>
> We are using Nagios as our primary monitoring tool which is integrated with
> Remedy (ticketing system) by MasterCell.
>
> Current setup:
> *) Nagios identifies critical "Alert"
> *) mpo
I don't know about others on this list, but what I do to start a new
configuration:
On Fri, Nov 27, 2009 at 3:47 PM, D G Teed wrote:
> With the fping command (not check_fping) I can feed it a list of IPs
> to check from a file. If I ran fping with -a and did a diff between
> that output and my
I've to second that. please setup automake & autoconf
On Fri, Nov 27, 2009 at 7:15 AM, Sofia Haschiu wrote:
> Hi, Dario
>
> I visited your site and since opcp is what I was looking for as a capacity
> planning solution for Nagios I was eager to give it a try. Unfortunately the
> documentation on
Hi list,
If I've flapping detection it supresses a Recovery notification in the event
of the flapping detection start just in the case of a Recovery Notification?
Is there a way to have flapping detection to NOT supress notification in the
Recovery event?
Cheers,
M
There is a check_mrtg plugin, if i recall correctly, you can check against
values on the RRD.
On Thu, Nov 26, 2009 at 7:07 AM, wrote:
> Dear all,
>
>
>
> I am currently using Nagios 3 in Solaris 10 X86 version, it
> is fine. Also I have install MRTG on the server and configure t
I'd like (and i think this is the answer for question #3):
* mobile webpages;
* customizable ajax/web2.0 interface;
Answers:
#1) the tactical overview is fine;
#2) would like to see what check commands nagios is issuing (for the need of
troubleshooting, issuing the same command nagios triggers is
Hi,
On Thu, Nov 19, 2009 at 4:15 PM, Flyinvap wrote:
> I would like to use last output and last performance data from a
> service in a plugin . The $SERVICEOUTPUT$ and $SERVICEPERFDATA$ macros
> contain this but a said in the doc :
>
> " These macros are not valid for the service they are associ
Hi Andrew,
On Thu, Nov 19, 2009 at 4:11 PM, Kaplan, Andrew H. wrote:
> I do have the pnp4-nagios utility installed on the Nagios server.
> Among the trends that are graphed by it is Current Load.
>
If Current Load is the trend to look at, which of the three data sources
> associated with it,
> lo
Hi Andew,
On Thu, Nov 19, 2009 at 3:48 PM, Kaplan, Andrew H. wrote:
> There are indications that an application on the monitored system is
> causing a slow memory leak.
> Is there a plugin or histogram setting that is available that would help
> check for memory leaks on
> the remote system? Than
Hi Brian,
On Thu, Nov 19, 2009 at 8:58 AM, Brian O'Mahony <
brian.omah...@curamsoftware.com> wrote:
> I want specific users to only have certain machines visible, but I cannot
> find the variable to add to the host/hostgroup.
>
You should create a contact, assign it to a contactgroup, and then u
YES!
On Tue, Nov 17, 2009 at 7:25 PM, Marc Powell wrote:
>
> On Nov 17, 2009, at 3:14 PM, Marcel wrote:
>
> > Capitalize the varname: $_HOSTSSHPORT$
> >
> > Instead of the documentation saying that it is case insensitive, it only
> works on TOUPPER variable nam
Hi there,
On Tue, Nov 17, 2009 at 5:33 PM, Eric Emerson wrote:
> //I am trying to set up some custom Object Variables based on the following
> docs but I must be misunderstanding something:
> define service{
> use someStandardServiceTemplate
> host_nam
ink it could be a configuration problem?
Best regards,
Marcel
On Tue, Nov 17, 2009 at 4:39 PM, Marc Powell wrote:
>
> On Nov 17, 2009, at 10:45 AM, Marcel wrote:
>
> > Now I want to refer to this $_HOSTip_provate_VIP_1$ macro in services
> definitions, but nagios is complaini
,
Marcel
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what&#
m macros should NOT be used in service
definitions?
Because I'd need to create ONE COMMAND per VIP just to use custom macros?
I would like to set just one services, to use just ONE command, and be able
to check the whole webserver farm.
Have you pointed a browser to /nagios ?
On Wed, Nov 5, 2008 at 6:04 AM, Traiano Welcome <[EMAIL PROTECTED]>wrote:
> Hi Renato
>
> Please could you send us the output of a telnet from an Ubuntu machine to
> the freebsd Apache port? Your issue *may* be related to a tcp window-scaling
> issue that
On Tue, Sep 23, 2008 at 10:50 PM, Gavin Carr <[EMAIL PROTECTED]>wrote:
> On Tue, Sep 23, 2008 at 04:42:45PM -0300, Marcel wrote:
> > I think you missed the point Andreas tried to make.
> >
> > On Tue, Sep 23, 2008 at 5:48 AM, Kenneth Holter <[EMAIL PROTECTED]
>
using $USER1$ and $USER2$ where
pertinent, and then, on every x64 system, you should use the _64 commands.
HTH,
Marcel
>
>
> On 9/23/08, Andreas Ericsson <[EMAIL PROTECTED]> wrote:
>>
>> Kenneth Holter wrote:
>>
>>> Hello all.
>>>
>>>
>
IF there is no way to plug-in any post-login script, you should edit
manually the /path/to/nagios/etc/cgi.cfg and add your login name where suits
your needs.
And, you should add your login name to be a contact, and that contact should
be a member of a contactgroup to actually see your hosts being
Hi,
Anyone have cents to share about this monitoring solution?
Just get to know about it, and sounds pretty damn covered by great
partnerships.
www.hyperic.net
I would like to hear the opinion about this tool, if anyone would share your
thoughts.
TIA,
Marcel
Hey there, just a thought,
On Tue, Sep 9, 2008 at 1:37 PM, localyee <[EMAIL PROTECTED]> wrote:
> i can monitor the server of a host,as HTTP,FTP...
> and how can i monitor an application the the host using nagios,
> what i want is to check if the application is running well-balanced or not
>
IF
How many services did you have configured? You should post also the relevant
directives of nagios.cfg for us to look at.
On Fri, Aug 29, 2008 at 10:00 AM, Livio Zanol Puppim <
[EMAIL PROTECTED]> wrote:
> Hello,
>
> My Nagios is reporting a strange value at "next scheduled active
> check" for a sp
My central instance services.cfg has 13MB. Comprises about 15k services for
~4k hosts.
On Fri, Aug 22, 2008 at 5:43 AM, Assaf Flatto <[EMAIL PROTECTED]>wrote:
> I've never encountered a size limit.
>
> and i encountered a configuration with one file with a size of 2.4 mb .
>
> Assaf
>
>
>
> On Fr
Yo,
On Tue, Aug 19, 2008 at 5:31 PM, Joerg Linge <[EMAIL PROTECTED]> wrote:
> Murali Edula schrieb:
> > Hi,
> >
> >
> >
> > we are in the process of configuring Nagios monitoring tool in
> > distribution model.
> >
> > So I have configured nsca daemon on centrol server and send_nsca on
> > distri
y, but HTH,
Marcel
On Mon, Aug 18, 2008 at 3:39 PM, Serafin, Chris <[EMAIL PROTECTED]> wrote:
> The client/myself tend to shy away from running clients on the servers,
> as we both prefer SNMP. Thank you for your response though!
>
>
>
> Back to google'in for
Anyone has setup any kind of black hole BGP monitoring?
TIA,
Marcel
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win gre
tress
lonestar dot org, i can't tweak libs nor anything. Nagios-2.5 compiles fine.
Did any of NetBSD sysadmins out-there knows of any way to get svn nagios
compiled on NetBSD 2.1?
TIA,
Marcel
-
This SF.Net email i
On Tue, Jul 22, 2008 at 6:26 PM, Mark Young <[EMAIL PROTECTED]> wrote:
>
> On Jul 22, 2008, at 7:56 AM, Sean Carolan wrote:
> > I have heard that check_by_ssh can cause a lot of overhead on large
> > networks where there are many checks going on at the same time. Can
> > anyone give some practica
On Tue, Jul 15, 2008 at 7:15 AM, Thomas Guyot-Sionnest <[EMAIL PROTECTED]>
wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 14/07/08 04:40 PM, Marcel wrote:
> > Hey,
> >
> > Have any of you have seen anything like this before?
> >
>
host_freshness_check_interval=900
cheers from Brazil...
Marcel
-
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your
On Tue, Jul 8, 2008 at 8:57 AM, André Moura <[EMAIL PROTECTED]> wrote:
> I'm using Nagios 3.0.3 in Red Hat AS 5 with 7.000 services checking. But,
> where rotation log the midnight, this problem occurs:
>
> service1 CRITICAL 08-07-2008 08:42:56 1d 4h 10m 13s 1/1
> return to plugin
>
>
. Alternately, have the service check
> assigned to all possible hosts but exit as OK if the software isn't
> supposed to be running on it at that time.
>
> --
> Marc
Cheers,
Marcel
-
Sponsored by: SourceForge
will come up using WMI.
Thank you again.
Marcel
On Wed, Jul 2, 2008 at 9:38 PM, Anthony Montibello <[EMAIL PROTECTED]>
wrote:
> Hi Everyone,
>
> There is finally a new version of NC_Net released on Sourceforge: V4.4.x
> http://sourceforge.net/projects/nc-net
>
> NOTE:
> O
On Tue, Jul 1, 2008 at 1:20 AM, Joerg Linge <[EMAIL PROTECTED]> wrote:
> Marcel schrieb:
> > Yeah, man, i'm in a situation like yours... Trying to test pnp,
> > nagiosgrapher, and so on...
> >
> > PNP seems to me to be the most scalable solution, as it implem
Yeah, man, i'm in a situation like yours... Trying to test pnp,
nagiosgrapher, and so on...
PNP seems to me to be the most scalable solution, as it implements batch
mode updates... But I'm still trying to tweak configurations and stuff...
The major problem to me is that the documentation I've fou
have you looked at DNX? I think it's the way to solve your problem.
On Tue, Jun 24, 2008 at 2:06 PM, Brian A. Seklecki <
[EMAIL PROTECTED]> wrote:
> All:
>
>
> In the el-generic Master w/NSCA distributed configuration, has anyone
> developed a hack to have cmd.cgi pass a SCHEDULE_FORCED_HOST_CHEC
.)
>
> -Drew
>
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:
> [EMAIL PROTECTED] On Behalf Of Drew Weaver
> Sent: Wednesday, June 18, 2008 1:53 PM
> To: 'Marcel'
> Cc: nagios-users@lists.sourceforge.net
> Subject: Re: [Nagios-users] Bunch of
27;m just writing this down to see if someone had the same problems
regarding CHKBUFs not being consumed.
Thanks you in advance,
Marcel Mitsuto.
-
Check out the new SourceForge.net Marketplace.
It's the best place to
#!/bin/bash
# nusers.sh
WARN_T=$1;
CRIT_T=$2;
UPTIME="/usr/bin/uptime";
NUSERS_NOW=`$UPTIME|awk '{print $4}'`;
[[ $NUSERS_NOW -lt $WARN_T ]] || ( echo "WARNING"; exit 1);
[[ $NUSERS_NOW -gt $CRIT_T ]] && (echo "CRITICAL"; exit 2);
echo "UKNOWN"; exit 3;
#end nusers.sh
On Mon, May 26, 2008 at
I would be glad to test it. 64 bits, vista, 2003 servers, and all kinds of
monitoring needs.
On Tue, Apr 22, 2008 at 11:25 PM, Anthony Montibello <[EMAIL PROTECTED]>
wrote:
> Hi List;
>
> Well its been a very busy year for me, but the long awaited next release
> of NC_NEt is almost complete.
> a
There is a thread about creating some indexes, search on.
On Tue, Apr 8, 2008 at 12:49 PM, Rusty Hall <[EMAIL PROTECTED]>
wrote:
> I have nagios 3.01 and the latest version of ndoutils,
> nagvis and pnp4nagios installed on redhat 5.1. Everything runs on the same
> server includi
>From NDOUtils 1.4.b7 Changelog:
1.4b7 - 10/31/2007
-
NOTE: ** Requires Nagios 2.7 or higher, or Nagios 3.0b6
- Makefile fixes for compilation flags
- Fix for bug where service check table always had same start/end time
- Added sample init script for SLES (Bruno Quintais)
- Added -
7;$SERVICESTATE$ alert for $HOSTALIAS$/$SERVICEDESC$'
$CONTACTEMAIL$
command.cfg.in:command[host-notify-by-email]=/bin/echo -e "* Nagios
*\n\nHost "$HOSTALIAS$" is $HOSTSTATE$!\n\nDate/Time: $DATETIME$\n"
| /bin/mail -s 'Host $HOSTNAME$ is $HOSTSTATE$!
Learn scripting. Read docs and mailing list archives, ask smart.
But, in meanwhile, fruity is getting back on track, and monarch is still a
good choice of nagios config tool. I've never used Nace nor NagioSQL, but
there are people out there using them.
To complete automate monitoring related conf
If you would have a round-robin dns setup to reach that particular host, you
would be fine tweaking a check_host_alive command with high lost percentage,
but still reachable. But you will rely on dns name resolution to do that.
HTH,
Marcel
On Mon, Mar 17, 2008 at 4:45 PM, Israel Brewster <[EM
I"ve meant:
"I have NOT implemented yet..." - sorry for my bad english.
On Fri, Mar 7, 2008 at 3:10 PM, Marcel <[EMAIL PROTECTED]> wrote:
> I guess that in 3.0rc3 you can modify service check configuration
> on-demand.
>
> Not implemented yet, but you sh
here it is:
http://nagios.sourceforge.net/docs/3_0/adaptive.html
On Fri, Mar 7, 2008 at 3:10 PM, Marcel <[EMAIL PROTECTED]> wrote:
> I guess that in 3.0rc3 you can modify service check configuration
> on-demand.
>
> Not implemented yet, but you should be able to do somet
I guess that in 3.0rc3 you can modify service check configuration on-demand.
Not implemented yet, but you should be able to do something like changing
normal_check_interval until it reaches an OK state.
Anyone here already come up with a solution to this problem?
Cheers
On Fri, Mar 7, 2008 at
I'm using NDO with 11 distributed nagios servers instances and over 15k
services fine, thanks!
Nagvis is running fine either, thanks! Service and Hostgroup views of
products, thanks!
I'm very thankful by the way! :)
Cheers
On Jan 15, 2008 12:27 PM, Giles Coochey <[EMAIL PROTECTED]> wrote:
> A
phone number).
Basically - very basic SMS gateway. With pre-paid sim card that would be
just magic!
Does something like that exist? Possibly with two-way communitaction?
What price should I be looking at?
Cheers!
Marcel
Well, but it _is_ possible, against what patrick stated.
Sure it's dumb, though, but impossible would be too hard on Nagios.
cheers,
On 9/25/07, Andreas Ericsson <[EMAIL PROTECTED]> wrote:
>
> Marcel wrote:
> > what if one craft a check-host-alive command with a sl
1 - 100 of 204 matches
Mail list logo
