Hello!
Sorry for my bad English. I have installed Nagios Version 3.0rc1 and NDOMOD
1.4b7. When I restart Nagios occurs as follows:
[08-27-2008 09:05:39] Nagios 3.0rc1 starting... (PID=13053)
[08-27-2008 09:05:39] Local time is Wed Aug 27 09:05:39 ART 2008
[08-27-2008 09:05:39] LOG VERSION: 2.0
[0
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tec. Felix D. Sanchez wrote:
| Hi
|
| i've very strange problem, i've freebsd 6.3 and nagios 3.0.3 compiled
| from source, my problem is if nagios dameon is not runing, the web
| interfaces does not recognize if the process is down or up, if run
| /u
Hi
i've very strange problem, i've freebsd 6.3 and nagios 3.0.3 compiled from
source, my problem is if nagios dameon is not runing, the web interfaces
does not recognize if the process is down or up, if run
/usr/local/nagios/libexec/check_nagios -F /usr/local/nagios/var/status.dat
-e 1 -C '/usr
When a service goes offline, nagios is supposed to tell nagios ircbot
about it. The message gets to nagircbot but nagios is stuck in a dead
heat run at 100% cpu on read()
[1215140088.267404] [256.1] [pid=12801] Running command '/bin/echo
"PROBLEM DispatchBuddy Internal_PING_WAP_Dayroom CRITICAL $
In the past I have reported problems when our master server has failed
with "Out of memory" problems caused by all server memory and swap space
being used up. I have largely (but not completely) solved these by
increasing the number of "Command" and "Check result" buffers. However
I would like so
I am having problems with nagiosgraph sporadicly plotting. I am running
nagios 3.0b1 and nagiosgraph on solaris10. Also nagiosgraph is leaving
these files in /tmp...thus filling up my filesystem. If i restart
nagios, things work great for a little while. Then it goes back to
sporadic plotti
Hi,
[EMAIL PROTECTED] schrieb am 04.05.2007 13:23 Uhr:
> [...]I know that
> insert.pl is used by nagiosgraph. The externall commands doesn´t works
> inmediatly, it takes an a hour to check the service...!!!
>
Have you tried to setup NagiosGrapher to use the udp network
transmission instead of
Hi friends! I´m on troubles!
I installed nagios 2.7 in a Suse. I integrated nagiograph, all was
working fine. The externall commands, graphs. works fine.
I decided to upgrade nagios , so i downloaded nagios3.0a3. I installed,
but is not working well. Now my machined is working really slow
Frost, Mark {PBG} wrote:
> As a followup, it looks like (perhaps among other issues) the
> s3_poller.php script is timing out.
>
> I've turned on the displaying of PHP error messages and when I put the
> s3_poller.php URL in and wait, I eventually get:
>
> Fatal error: Maximum execution time of 30
stream_get_contents($StatusFileHandle), $ServiceMatches,
PREG_OFFSET_CAPTURE, 0);
Mark
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Frost,
Mark {PBG}
Sent: Tuesday, January 23, 2007 11:05 AM
To: Nagios Users mailinglist
Subject: [Nagios-users] problems wi
Hi Mark,
If you enable the debugging option in the client/s3_config_stub.inc.php
file ($Stub_ClientEnableDebugging) to 1, then visit
"http://nagioshost/nlg/client/?debug=yes";, that will generate your
debugging output, but I'm guessing it will go as far as the error it's
already generated in t
Hello. I've been trying to use Nagios Looking Glass and have so far
been unable to. I've tried 1.0Pre, 1.0 and now 1.0.1.
When I go to the client URL (http://nagioshost/nlg/client) it sits there
working on it for 30 seconds and gives me back an error page which
includes:
The checksum I
> Is /usr/local/lib in your /etc/ld.so.conf ?
>
It wasn't. It is now.
> What does "ldconfig -v | grep libpng" give you?
Well, now it lists out the library and the symbolic links.
Further more - the statusmap.cgi now gives me a picture. Somethings
still broken - but it must be one of the dep
gios-users] Problems with Nagios
Hi Giles
> Specify your hostname in apache, not nagios.
>
Infact, I've just done exactly that. I've put all the Nagios
configuration in the virtual server stanza and removed anything from the
global area. Low and behold - I now have my pages ba
Hi Giles
> Specify your hostname in apache, not nagios.
>
Infact, I've just done exactly that. I've put all the Nagios
configuration in the virtual server stanza and removed anything from the
global area. Low and behold - I now have my pages back - but they're
still not showing the coloura
Specify your hostname in apache, not nagios.
-Original Message-
From: Neil Briscoe [mailto:[EMAIL PROTECTED]
Sent: 15 August 2006 11:18
To: Giles Coochey
Cc: nagios-users@lists.sourceforge.net; [EMAIL PROTECTED]
Subject: RE: [Nagios-users] Problems with Nagios
> ./configure --pre
> ./configure --prefix=/usr/loca/nagios --with-cgiurl=/nagios/cgi-bin
> --with-htmurl=/nagios/ --with-nagios-user=nagios
> --with-nagios-group=nagios --with-command-group=www-data
> --with-gd-inc=/usr/local/include --with-gd-lib=/usr/local/lib
Actually, when I ran with that specific command line -
]
[mailto:[EMAIL PROTECTED] On Behalf Of Neil
Briscoe
Sent: 15 August 2006 10:50
To: [EMAIL PROTECTED]
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Problems with Nagios
Well, its still not working. I've tried a few invocations. At the end
of the ./configure run I get something
Well, its still not working. I've tried a few invocations. At the end
of the ./configure run I get something that looks like :-
Web Interface Options:
HTML URL: http://localhost//admin.eninet.com/nagios/
CGI URL:
http://localhost/
Hi Marc
> --with-cgiurl and --with-htmurl should be specified as accessed by
> your
> browser, not the filesystem path. Probably --
>
> --with-cgiurl=/nagios/cgi-bin --with-htmurl=/nagios
I knew it would be something to do with those - and couldn't remember
what I'd typed the first time.
I'll
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Neil Briscoe
> Sent: Monday, August 14, 2006 6:21 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Problems with Nagios
>
> I'm havin
I'm having a problem with Nagios which is this. At the moment, I have a
version of Nagios that monitors a few systems, but the screens all
display incorrectly. The reason for this was that I originally compiled
without gd and all its friends.
I have now rectified the lack of the libraries and
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Andrew Meyer
> Sent: Wednesday, May 10, 2006 2:31 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Problems with nagios config
>
> I seem
I seem to be getting this error everytime I try to test the config:
Reading configuration data...
Error: Could not find any host matching 'myorgDC01.mycompany.com'
Error: Could not expand member hosts specified in hostgroup (config file
'/usr/local/nagios/etc/hostgroups.cfg', starting on line 21)
24 matches
Mail list logo
